MSI TI4600 problem

Hi
i have a MSI TI4600 AGP8x(602-8900-070) but the detonator 45.23 drivers detect a TI4800 GPU... the card is VERY hot.... the system tº up to 47ºc !!!!!!
please help me after burning my card

eXPerience,
Btw, a GeForce4 Ti4600 with 8X is a GeForce4 Ti4800. So your drivers are detecting the card correctly.
Do not worry about the Temp, it is withing normal operating limits for that card.
Take Care,
Richard

Similar Messages

Okay, here is a GF4 Ti4600 problem for you

My MSI Ti4600 problem has a problem blocking in games. It runs a little blocky in most games, but NFS Porsche is the worst.
I had a LeadTek GF3 w/64 meg RAM in there before that ran great. I really don't know why I wanted to change it... The same games ran great on my GF3, and continue to run great on the same GF3 in my P3 750 machine. Here are my machine specs:
P4 2.0 GHtz
768 meg pc800 ram
Western Digital 120 gig 7200 rpm w/8 meg cache
Western Digital 40 gig 7200 rpm
600 watt (yes, 600) power supply
MSI GF4 Ti4600
Intel D850EMV2 motherboard
Aopen 12x DVD
Samsung 40x12x40 cd-rw
USB 2.0
D-Link ethernet card
Creative Labs Audigy Platinum EX
Direct X 9
Windows XP home on the 120 gig drive and Red Hat Linux 8.0 on the 40 gig drive.
Also, the case, processor, chipset, hard drives and video card are all liquid cooled. The card is not overclocked and my video settings are set at 800x600. I had Direct X 8.1 in and it still did the same thing. My 3D Mark score is almost identical to the GF3 card at 11,700.
So what gives? Is this video card as cheap as I think it is?

Okay, problem solved!
I went with the ATI Radeon 9700 Pro, which by the way, uses more power than the GeForce 4 Ti4600, and have not looked back since! Oh yeah, I am using the same power supply too
Originally posted by deathstalker:
"Check out this POS Kingwin"
Don't you realize it is more affordable for a company to make one sticker and list all their products like a chart, rather than print four different stickers? If you have a problem reading that sticker, then you have absolutely no business being inside a computer!
Be careful about what you call a POS. My guess is that there are less than a dozen power supply manufacturers, as listed on the net. I can assure you that in manufacturing, one company will make the same product and put different names on it for other companies, distributors etc.....
Now a question for deathstalker and wonkaboy:
After about two days of searching the net, magazines, manufacturer's sites and speaking with techs in large and small computer stores, why did I find absolutely no articles or comments about Geforce 4's and power problems? If they need as much power as YOU say, and most power supplies sold in computers are around the 300 watt flavor( and not all antec), then why are there no articles or complaints about it? Why do the manufacturer's not put XXX watts combined required on the box, in the readme or in the manual? Because it is nowhere near an issue you are making of it.
Seriously, with thousands upon thousands of GeForce 4's sold, and nothing about power problems? Except here, of course.
By the way, I did find one site ( Best Buy I think) that listed some power requirements, they averaged at 300 watt power supply, if it was even listed. Most 300, some 250 and only one 350. All with no combined power recommendation.
If MSI has a need, it is heat sinks for the memory chips and a better gpu heat sink, but like your power supply idea, this is just an opinion.
I should've learned from the MSI mobo I had briefly. It had a nice little habit of supplying power to the KVM switch and optical mouse when it was shut down. I, however, got absolutely no help on the old website with this problem.
Now, after all that, I must thank the two of you for replying to this thread and trying to help me with this problem.
Thank You!
That is something I am sure you don't hear often on the net, or even in this message board :(

Msi ti4600 freezing?

Hi, I'm running into problems frequently on my recently purchased msi ti4600-vtd card (MS-8872). Everytime I try to play any game, it freezes up after a few minutes or seconds. For example, When I play No one lives forever, it freezes up after 5-10 minutes into the game.
I have tried downloading the latest Nvidia drivers (41.09) from there site but was still getting the same problem. Currently, I have 31.00 drivers from MSI and bios version; 4.25.00.27.33.
Also, once in a while, I get an error screen and it lists the file(s) that could possibly be causing the problem (nv.....) which I'm guessing are all video card base drivers. The only way is to reboot my pc which I am starting to get annoyed of.
Someone, Please help me resolve my problem.
Thank you
I have the A7N8X Deluxe motherboard using the onboard sound.
Amd Athlon XP 2000+
Samsung 512MB DDR 333mhz (2 sticks using the dual ddr feature)
wd 80gig special edition

that psu is good only for 180 watts combined but it does for some manage a gf4 4600
we say over 200 with a gf4
remove the lights etc just main drive and vga card and try,no cds etc
never seen a programme like that
got this from a pc magazine last xmas
posted this a while back in another forum
from pc answers xmas 2002 issue typical pc with gf4
p4,athlon 65-75watts 75
motherboard 20-30watts 30
graphics card 15-100watts 100
7200drive 30 watts x2 60
ram per 128mb 10watts x4 40
cdrom 25watts 25
dvdrom/writter 30watts 30
sound card 5-10watts 10
floppy/pcicard 5watts 10
zip drive 10watts -
networkcard 5watts 5
TOTAL 385watts
so add a bit for upgrades and get that 430 antec

MSI Ti4600 Not running right

I am having a hard time. I just got back from a LAN party and was excited to have my new MSI Ti4600 with the MSI Model KT3 Ultra2(6380E-050) and AMD XP 1900. I thought i would be smoking. My Ti 4600 could not keep up. It was making me so made. My question is do you know of any settings that i could fix to make this Ti 4600 scream? I changed the it to an AGP setting @ 4x in the bios and have installed the most recent Nvidia drivers. Your help you much appreciated!
Eric

Try going to display properties then advanced settings. There should be a tab there with the latest drivers to overclock the card. Also over at Techconnect they have an article on some hidden features that were found.

Msi motherbooard problems

Posts: 5
Topic Starter
MSI motherboard problems
« on: 17 November 2004, 06:34:44 am »
I just recently built a computer.
When I turn the computer on it stops at the MSI Platinum screen.
When I hit the reset button the computer reboots into windows. (Most of the times)
I am not over clocking.
I have loaded the defaults in the BIOS.
I have flashed the BIOS, updated all motherboard drivers, and video drivers.
I have run memtest 23 passes and no errors.
I have a thermaltake power supply 400 watts.
There are no beeps codes at post. The case didn't come with a speaker.
I have installed windows xp media center twice.
Could this just be an unresolved Bios issue or a bad board?
The computer runs great except for the startup problem.
Any suggestion would be helpful.
12 volt rail = 12.14
3.3 volt = 3.26
5 volt = 5
vcore 1.5 = 1.48 - 1.52
Temps:
cpu = 38 - 41c
case =21c
All the rails are within the limits.
CPU fan spinning at 3258
Here is a complete rundown of system specs
Thermaltake tsunami with 400-watt thermaltake power supply
K8N Neo Platinum MSI Motherboard
SAPHIRE9550 256MB catalyst 4.11
AMD 64 3000
DDR Corsair 512MB X 2 pc 3200 value select memory 2.5,3,3,6
HD 200GB SEAGATE SATA
DVD+/-RW PLEXTORPX-712A
SAMSUNG FLOPPY DRIVE
Windows xp media center

Try stripping down your system to bare minimum. Disconnect all CD drives, Floppy and HDD from your mainboard. Remove all un-needed cards. So you should have only the mainboard, CPU and RAM and a graphics card. Connect PSU to mainboard and power up. Now your PSU should be more than enough to power just that. Does it still lock???
If it does'nt then it something to do with one of the drives or optional cards you are fitting.
If it does still lock then it something to do with the main components.
I once saw a similar issue to this which maybe unrelated but thats why i asked you to disconnect drives. The issue i saw was down to the HDD not being detected on cold boot. Thus hanging the system, if you left it long enough it carried on and then failed to boot. But press the reset button and it would detect the HDD and load windows, until you switched the PC off again and the cycle would repeat. Now that was fixed by getting a BIOS update. This may not having anything to do with your issue but might be worth a look trying what i said above.
JC

Msi ti4600 card - graphic problems

here are my specs on my system for starters -
intel 1.8mhz p4
768mb crucial pc133 memory
toshiba 16x dvd-rom
tdk 32x cd-rw
maxtor 40g 4200rpm
maxtor 80g 4200rpm
floppy drive
400w silverhawk power supply
pctel pci modem
smz pci 10/100 NIC
usb 2.0 4port pci card
windows xp pro
award bios 6.00
ive had my ti4600 card for a few months and i have never had this problem. after say an hour or 2 on my pc ill suddenly get all kinds of different colored shapes on my screen. then my monitor will keep powering down and turning on until i have to reboot manually. i also get the weird squares and shapes on the startup bios screen. ive tried the monitor on other systems and that wasnt it. im runnning an old ati card right now and its running fine. i also tried different nvidia drivers (new and old) and i tried using the system with the cover off but i still get the same problem. can this be a heating problem? a powersupply problem? or do i just have to get it ready for RMA time. any help or suggestions would be thankful.

I had the close to the same thing start happening to my TI4600 just before Christmas. I was getting the "checkerboard pattern" in NFSHP2 and then on the Windows desktop. On reboot I would get either weird symbols or colors in the fonts in the bios screen. Then the fonts started disappearing from the bios screen. I requested an rma from MSI and they replaced the card. I was told that the cause of such a problem was "onboard memery chip failure" but I don't know that for sure. All I know is MSI replaced it

Nv4_disp.dll BSOD on MSI TI4600

I get a BSOD after playing Everquest for over 30 mins and tehn changing to char selection screen, it refers to either "nv4_disp.dll" or "PRF_LIST_CORRUPT", it started happening after i changed from the 21.83 NVIDIA driver to the newest 30.82 (i dont get the looping error)
After having trie all sorts of things i decided to reinstall my system with a complete HD wipe, with this new system, i was stupid enough to NOT install the old 21.83 drivers, and have been unable to make them install, so i still get the BSOD on a brand new install.
I have used MSI live update so BIOS and everything is the newest possible.
my system specs are as follows
CPU: Intel P4 1.8 Ghz
MB: MSI 8xx (im at work dont remember exact model)
Sound: SBlive 5.1
RAM: 2*512 MB Kingston 1.part
Graphic Card: MSI G4 TI4600
Anyone out there that have the same problem, and/or a solution?

Oh well !
I have the problem too and I have WinXP too.
I think, the problem is not RAM but, the library nv4_disp.dll
My PC:
P4 1.8Ghz (Notrhwood)
256 DDR RAM 333Mhz
MSI G4 TI4400

Major GeForce4:ti4600 problem

Hey everyone, I just bought the MSI Geforce4:ti4600 "champion Edition" video card and i have a huge problem. I uninstalled the drivers from the old video card i was using. and shutdown to install the new card. i installed it and boot up. when i got to the windows 2k screen i get alot of nasty artifact blocks with static going through some of them. i've read through a few threads about this problem but no one seemed to know the answer to the problem.
after i installed the drivers i figured it would be fine after that. was i wrong. it still gave me the same nasty blocks everywhere and it would not even go past the windows 2k start up screen. it would just give me a blue screen of death very quickly and restart. i looked in the BIOS to see if everything was fine and it was. here are my system specs: Abit KG7 mobo
AMD Athlon XP2000+
256mb 2100DDR micron ram
sound blaster x-gamer 5.1
10/100tb nic
windows 2k sp4
350W PSU
+3.3V 14A
+5V
+12V
+5VSB
hope you guys can help, thanks!

Well i just bought a new PSU for my PC and I'm still having the same problems with the video card. X( I think it's time to call MSI for an RMA. this sucks. i was hoping i would not have to do that. now i have to wait til after i move out next week to replace the card. this is my first time upgrading my vid card in over 2 years and i end up with a lemon. :(
well here are the new PSU specs.
3.3v= 28A---\_____220W
5v= 30A-----/
12v= 15A

MOVED: MSI 975X PROBLEM WITH INSTALLATION ON WINDOWS VISTA

This topic has been moved to Vista problems.
https://forum-en.msi.com/index.php?topic=101708.0

Beta 2 or RC1 candidate???? RC1 should support..........
Beta 2 is real, slow and you have alot of updates to DL, but both are pre-release products and will not work 100%.
Even when Vista is released, they will still be alot of hardware that will not work 100% and this is purely because software is always playing catch up to hardware.
It was only September, when Nvidia released some Beta2/RC1 drivers that worked properly........

MSI 975X PROBLEM WITH INSTALLATION ON WINDOWS VISTA

I have MB MSI-975X PLATINUM v.1 withbios ver 1.3,processor Pentium D940 (3,2GHz/800/2x2MB),2X512MB DDR-2 667MHz,in the beginning when I start the installation on WINDOWS VISTA the computer is bloked od it is restart.This problem I solved when I put another processor INTEL 541(3,2GHz/800/1MB) whit this processor everthing is ok,but with INTEL 940 it can not be install WINDOWS VISTA .
I’m asking you for a new superstructure on bios update .

Beta 2 or RC1 candidate???? RC1 should support..........
Beta 2 is real, slow and you have alot of updates to DL, but both are pre-release products and will not work 100%.
Even when Vista is released, they will still be alot of hardware that will not work 100% and this is purely because software is always playing catch up to hardware.
It was only September, when Nvidia released some Beta2/RC1 drivers that worked properly........

MSI GX60 problem sata3 HDD

I have a problem with with the 500 GB hdd Hitachi Travelstar Z7K500 HTS725050A7E630 in one of the slots in the laptop GX60 (slot DVD drive). The Russian Support Center could not help and advised to contact with support center - "for the objective diagnosis of faults." Do you have any information about such kind of problems with Laptop GX60 especially SATA 3? Or maybe, there is any solution to update the BIOS? This slot at the time of purchase worked WD5000BPVT sata 2.Also that slot been tested with SATA 3 ssd ADATA XPG SX900 128GB. And operates smoothly.
Hitachi 500GB Travelstar Z7K500 HTS725050A7E630 status -OK. And it works in the slot below the touchpad mode sata 3. But it is in that slot is reversed. What is extremely may affect its long performance.
Why in the slot under the DVD drive is a conflict with a 500GB hdd Hitachi Travelstar Z7K500 HTS725050A7E630?
Laptop model MSI GX60 1AC-007X bios 508 firmware 502

Hi ya,
Why did you feel you needed to change drive defaults?
Normally, hard drives are factory set to maximum compatibility. Sata I / II
You could also have defective cable........
Or many other problems............ no one will know with full system spex..........
Del

Wireless Router MSI RG60SE - Problem With Firmware

Hi, I have firmware 3.5.3 on my router MSI RG60SE. I updated this firmware to other version from here:
h t t p://faenl.msi.com/index.php?dir=Networking/RG60SE/
Problem is, that I dont know, what kind of firmware is it. When I finish updatig firmware, I dont connet to admin mode, I dont see wifi network of router. Router is maybe broken.
I am affraid, that the firmware is some special kind of firmware. Because in one of .rar files, which are including of the firmware web (h t t p://faenl.msi.com/index.php?dir=Networking/RG60SE/firmware/), contain picture. On the picture is depicted print screen from admin mode of the router RG60SE and there is available option ENABLE BRIDGES. In old firmware this option I never seen. Here is a picture with these option:
h t t p://img268.imageshack.us/img268/8885/nlw.bmp
Please, advise me, what am I doing with it. Because, none of my devices cant connect. And I dont know connect to admin mode of router. Thanks

No idea why it blocks it.
Silly is that it does work upto the last trace.
Have you tried a ping with a larger byte size?
You do know that ping is working with extreme small blocks by default.
I just noticed Google refuses to accept large packets!
Have you tried other routes except Google?
Quote
bas@Workstation:~$ ping -s 8192 80.190.249.54
PING 80.190.249.54 (80.190.249.54) 8192(8220) bytes of data.
8200 bytes from 80.190.249.54: icmp_seq=1 ttl=55 time=98.2 ms
8200 bytes from 80.190.249.54: icmp_seq=2 ttl=55 time=97.5 ms
8200 bytes from 80.190.249.54: icmp_seq=3 ttl=55 time=99.4 ms
^C
--- 80.190.249.54 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2002ms
rtt min/avg/max/mdev = 97.505/98.406/99.449/0.878 ms
bas@Workstation:~$ ping -s 8192 www.google.be
PING www.l.google.com (74.125.79.104) 8192(8220) bytes of data.
^C
--- www.l.google.com ping statistics ---
8 packets transmitted, 0 received, 100% packet loss, time 7046ms
Try tracert 80.190.249.54 does that trace?

MSI RG54GS2 - problem with print server

Hi,
I have router MSI RG54GS2. Everything works correctly. If I connect printer to USB on router then my router works only 10 hours and then it freezes. If printer is not connected, router works fine without freezing.
I tried to use new firmware, but it doesn't solve my problem.
What should I do, please?

So, I tried it. Router works correctly without freezing but only via cable :( . If I try to connect via WiFi to my NETWORK, then my notebook and PDA find SSID and that's all. Widows show formular that everithing is connected correctly, but internet and lan network doesn't work. If I disconnected PRITER from router, then noteebok and PDA could connect to internet and local network.
:( I have only trouble with this router :> .

Maxtor SATA and MSI KT6V Problem

Hey !!!
I se many people with the simillar problem...
Our customers are getting wery angry because their computers doesn't work.
The problem first aquired with the Maxtor 120 and 80gb SATA hdd:s
We have mounted many computers and about 60% of the computers have the same problem with SATA hdds...
Allmost every computer also had MSI KT6V or DELTA
We tried every possible bios uppdate, mobo drivers, SATA drivers etc.
Does anyone have any explanasion to this problem???
After many defective Maxtor hdd:s we tried Samsiung 120Gb SATA hdd:s....same problem...
We have been in contact with MSI. Maxtor and Samsung customer services, but they had no solution
If someone has any usefull tips You can contact me at [email protected]

there are 2 threads, that you should take a look
https://forum-en.msi.com/index.php?threadid=47387&sid= that ends with RMA
and
https://forum-en.msi.com/index.php?threadid=47615&sid=
Both threads are IMHO compatibility problem, but if someone says I am wrong, I can be wrong... :hypecrite:

PLS HELP MSI Bluetooth problem

I have folowing problem.. everything worked some time ago, then i put today BT in USB, but WinXP didn't install it with message - There was a problem installing this HW MSI bluetooth device - The required section was not found in the INF.
Can anybody help?
THNX

Bugs4bugs message got me thinking... and checked the Windows Update.log in c:\windows and it has certainly pulled down a new file every time I plug in the MSI BT key. So I quickly whipped out the network cable and tried again and.... YEESSS IT WORKS!!!
Setupapi.log before:
#-019 Searching for hardware ID(s): usb\vid_0db0&pid_1967&rev_0525,usb\vid_0db0&pid_1967
#-018 Searching for compatible ID(s): usb\class_e0&subclass_01&prot_01,usb\class_e0&subclass_01,usb\class_e0
#I022 Found "USB\Vid_0db0&Pid_1967" in C:\WUTemp\com_microsoft_whql.7599401\BTDongle.inf; Device: "MSI USB Bluetooth Device"; Driver: "MSI USB Bluetooth Device"; Provider: "Bluetooth Dongle Maker"; Mfg: "WHQL"; Section name: "BCBTUsbDriverInstallXP".
#I023 Actual install section: [BCBTUsbDriverInstallXP.NT]. Rank: 0x00000001. Effective driver date: 10/17/2002.
#-166 Device install function: DIF_SELECTBESTCOMPATDRV.
#I063 Selected driver installs from section [BCBTUsbDriverInstallXP] in "c:\wutemp\com_microsoft_whql.7599401\btdongle.inf".
#I320 Class GUID of device remains: {E0CBF06C-CD8B-4647-BB8A-263B43F0F974}.
#I060 Set selected driver.
#I058 Selected best compatible driver.
[2004/02/18 21:53:52 2000.10]
#-199 Executing "C:\WINDOWS\system32\rundll32.exe" with command line: rundll32.exe newdev.dll,ClientSideInstall \\.\pipe\PNP_Device_Install_Pipe_0.{14BECCEC-D237-4765-85F1-2A8ED24D0D3A}
#I140 Installing device class: "Bluetooth" {e0cbf06c-cd8b-4647-bb8a-263b43f0f974}.
#E067 Could not locate section [ClassInstall32].
#E142 Class: {E0CBF06C-CD8B-4647-BB8A-263B43F0F974}. Install failed. Error 0xe0000101: The required section was not found in the INF.
And after:
#-018 Searching for compatible ID(s): usb\class_e0&subclass_01&prot_01,usb\class_e0&subclass_01,usb\class_e0
#-019 Searching for hardware ID(s): usb\vid_0db0&pid_1967&rev_0525,usb\vid_0db0&pid_1967
#-018 Searching for compatible ID(s): usb\class_e0&subclass_01&prot_01,usb\class_e0&subclass_01,usb\class_e0
#I022 Found "USB\VID_0DB0&PID_1967" in c:\temp\bt\msi_bluetooth_software\btwusb.inf; Device: "MSI USB Bluetooth Device"; Driver: "MSI USB Bluetooth Device"; Provider: "WIDCOMM"; Mfg: "WIDCOMM"; Section name: "BTWUSB".
#I087 Driver node not trusted, rank changed from 0x00000001 to 0x00008001.
#I023 Actual install section: [BTWUSB.NT]. Rank: 0x00008001. Effective driver date: 06/17/2003.
#-166 Device install function: DIF_SELECTBESTCOMPATDRV.
#I063 Selected driver installs from section [BTWUSB] in "c:\temp\bt\msi_bluetooth_software\btwusb.inf".
#I320 Class GUID of device remains: {95C7A0A0-3094-11D7-A202-00508B9D7D5A}.
#I060 Set selected driver.
#I058 Selected best compatible driver.
#-124 Doing copy-only install of "USB\VID_0DB0&PID_1967\5&B114931&0&1".
#E360 An unsigned or incorrectly signed file "c:\temp\bt\msi_bluetooth_software\btwusb.cat" for driver "MSI USB Bluetooth Device" will be installed (Policy=Ignore). Error 0x800b0003: The form specified for the subject is not one supported or known by the specified trust provider.
#W187 Install failed, attempting to restore original files.
#E360 An unsigned or incorrectly signed file "c:\temp\bt\msi_bluetooth_software\btwusb.cat" for driver "MSI USB Bluetooth Device" will be installed (Policy=Ignore). Error 0x800b0003: The form specified for the subject is not one supported or known by the specified trust provider.
#-024 Copying file "c:\temp\bt\msi_bluetooth_software\btwusb.sys" to "C:\WINDOWS\System32\DRIVERS\btwusb.sys".
#E360 An unsigned or incorrectly signed file "c:\temp\bt\msi_bluetooth_software\btwusb.sys" for driver "MSI USB Bluetooth Device" will be installed (Policy=Ignore). Error 0x800b0003: The form specified for the subject is not one supported or known by the specified trust provider.
#-336 Copying file "c:\temp\bt\msi_bluetooth_software\frmupgr.sys" to "C:\WINDOWS\System32\DRIVERS\frmupgr.sys" via temporary file "C:\WINDOWS\System32\DRIVERS\SET1D.tmp".
#E360 An unsigned or incorrectly signed file "c:\temp\bt\msi_bluetooth_software\frmupgr.sys" for driver "MSI USB Bluetooth Device" will be installed (Policy=Ignore). Error 0x800b0003: The form specified for the subject is not one supported or known by the specified trust provider.
#-166 Device install function: DIF_REGISTER_COINSTALLERS.
#I056 Coinstallers registered.
#-166 Device install function: DIF_INSTALLINTERFACES.
#-011 Installing section [BTWUSB.NT.Interfaces] from "c:\temp\bt\msi_bluetooth_software\btwusb.inf".
#I054 Interfaces installed.
#-166 Device install function: DIF_INSTALLDEVICE.
#I123 Doing full install of "USB\VID_0DB0&PID_1967\5&B114931&0&1".
#E360 An unsigned or incorrectly signed file "c:\temp\bt\msi_bluetooth_software\btwusb.cat" for driver "MSI USB Bluetooth Device" will be installed (Policy=Ignore). Error 0x800b0003: The form specified for the subject is not one supported or known by the specified trust provider.
#I121 Device install of "USB\VID_0DB0&PID_1967\5&B114931&0&1" finished successfully.
Basically, cutting out Windows Update as a possible source for a new driver forced it to use the local MSI install files.
Anyone else care to give this a try?
Now I just need to sort out the new hardware serial number nonsense key thing!
Cheers,
Matt

MSI TI4600 problem

Similar Messages

Maybe you are looking for