MSI TI4800 Tv-Out problem

This is an incredibly annoying problem, I'm not sure if it has anything to do with the card itself but I'm hoping that someone else has experienced the same kind of problem...
Everything works fine as far as connecting the tv to the computer, and I see the screen clearly. I can play games and do whatever else on the computer the problem only occurs when I want to watch a movie. The movie runs fine to start with, but when I turn on 'fullscreen mode' in whatever program I use the edges and outlines of objects in the movie gets fuzzy. I can stretch the movie window out
It doesn't matter what program I use, but with my old GeForce2 card the picture is fine which is why I'm starting to think it's a problem caused by the MSI card.
The card is currently connected from the S-Video connector on the converter onto my S-Video-in connector on the TV [Exactly the same cables and everything else that I use with my GeForce2].
I've tried with several different drivers, the ones that came with the card nVidia's newest drivers along with the former version of the nVidia drivers. The problem remains.
I hope I have submitted enough information to solve the problem..
Best regards,
Jules

Thanks for the reply..
I've tried with different programs(Windows Media Player 7.0 and 9.0 and GDiVX) both have the same kind problem.
Alas, I did what you asked me to do, check the BIOS label on the graphics card itself, although the only problem was I couldn't remove the friggin cooler which covers half the card. Also means I couldn't get the number you needed, atleast not for now. So I wonder if I can get the information needed through browsing the computer without actually having to fiddle around with the heatsink or if I have to remove it with great force
Or perhaps is it so that the BIOS chip is located on the backside of the card, in which case I will have to open it up again and take a look(didn't quite think about that until now :/)
I may have to add that the TV on which I try to watch the movie from the computer 100hz "refresh rate"(or what you would call it..) but I don't see why that would make a difference when it didn't with other graphics cards I've tried..?
The information I can find about BIOS right now, from reading what's in MSI information under display properties is as follows:
BIOS Version: 4.28.20.21.00
Not sure if that's what you might be looking for though, being as it looks nothing like n8852ms100..
That's all I can find for now, thanks for the help so far and I hope to hear from you again soon..
Best Regards,
Jules

Similar Messages

MSI MEGA TV-OUT problem (865)

I bought this card thinking that going with the MSI one was the best choice for an MSI system. Has anyone gotten this card to work in a MEGA 865? If so, please help me get mine working.
Thanks!

Below is the actual message that MSI support sent me. That's all I 've got.
MS-6957 (TV Out) card only works with the Mega651 unit and not on Mega180 or Mega865 PC.
Sincerely,
Technical Support Division
MSI Computer Corp.
http://www.msicomputer.com
--------------------------------------------------------------------------------------------

PRoblem w/ MSI MEGA TV OUT-CARD

Msi 865 Tv Out not working
i just got the msi mega TV out card for my Mega 865 today, i installed it.
Plugged in an AV cable, connected it to the TV and NOTHING!!!
Has anyone else installed one , if so when you installed it did windows recognize it as new hardware ?, because mine did not,and i found that odd.it should recognize it as new hardware right ?. I dont know if the TV out Card is faulty or if something esle is wrong ???? suggestions pls

" but in the VGA driver properties where you select the output devices (once you install the driver) the option to enable the TV should become available. "
The VGA drivers for the intel extreme G2 that came with the msi 865. "intel 845G/865G VGA DRIVER" are installed.
i'm running xp pro.
where do i find the driver properties, you mean the extremeG2 properties right ?>in the device section it only shows monitor . i do not see any option for tV
i went to intel 82865g graphic controller prop. > i checked devices , and i went to drivers, all installed but i see no TV option ??? would it be an Icon >>>>
am i doing something wrong ??
sorry if i'm a little so, thanks for the help

TV OUT Problem this is how I solved.

Well, first of all I cannot guarantee if this will work for all people with tv out problems. TV with PC I think will always be a BIG headache .
How I did fix my TV OUT problem. Since I live here in Brazil, people have a problem with the system that is Pal-m. But this is easy to set up, since you just have the screen working on your TV.
The first thing that I did is to remove completely the most recent NVDIA drive (not the one made for MSI) that is 30.82. I also removed the WDM driver. Since Im using XP I didnt have to reboot 30 times just 20, , yes 20 reboot times to see if everything was all right, it took me about 1,5 hour of work.
The second thing was that I started to install the driver that came with my MSI Card (Geforce4 MX-460 TV OUT). The version was 27.50. The TV out problem was gone. I got a really nice image from the screen.
Than It came the must boring part. ;( I tested all nvidia drives from 27.50 to 30.82. Look the results I got concerning just the nview situation(dual monitors):
Nvidia 28.32. work with nview.
nvidia win-xp-2k-2835 work with nview.
nvidia win-xp-2k-2880 doesnt work with nview.
nvidia win-xp-2k-2890 doesnt work with nview.
nvidia win-xp-2k-2911 doesnt work with nview. Not all parts from the driver was updated, someone belongs to 28.90.
nvidia win-xp-2k-2920 doesnt work with nview.
nvidia win-xp-2k-2942 doesnt work with nview.
nvidia win-xp-2k-2960 doesnt work with nview.
nvidia win-xp-2k-2980 doesnt work with nview.
nvidia Win2k-xp-29.90 doesnt work with nview.
nvidia W2K_XP_V29.90 doesnt work with nview
nvidia Win2k-xp-3020 doesnt work with nview
nvidia Win2k-xp-3030 doesnt work with nview.
nvidia Win2k-xp-3082 doesnt work with nview.
I got all this drivers from a really nice site: 3dchipset .
Of course most of these are beta drivers and due to my limitation knowledge, I dont know why the nview display stopped to work at version 28.32.
And the last. The driver 28.90 driver did a really fatal crash on my PC when I was using my web camera and the nview together. It just shut down my PC, at once. X(
That all folks

Yes, that's how iMessage should work. Try this. Sign out of Messages on both devices. Sign back in on your phone and wait until it activates. Go to Settings>Messages>Send & Receive. Make sure Start New Conversations From is set to our mobile number. Then sign in on your iPad using the same Apple ID as you use on your phone. Once it activates, verify the settings. I've got iMessage syncing across my iPhone, iPad and MBA. Every once in a while, there's a glitch but rarely.
Best of luck.

RS482M4 TV-OUT problems / Better BIOS?

RS482M4-ILD is the board i have
Using on board Video /W the D-SUB connection.
What i have tried is the CD-Driver, MSI's, Latest Driver and now am using ATI's IPG 5.13 Driver.
However i can not use both TV-OUT and VGA at the same time, anyone have any idea for me?
Also does anyone know of a better BIOS for this board?
Beta or modified it doesnt matter, memory settings are VERY VERY poor, CAS only
And Voltage HTT options at all.
I am using my old RAM on this board, and would like to run it properly, its PC4000 / DDR 500
SO the goal is to run the RAM at a 1:1 ratio.
Dont plan on overclocking so i would be lowering the multiplier (currently the only option i have) to keep the CPU at around stock speed
I will also probly lower the Vcore on this CPU to keep heat low as its in a SFF case.
CPU is a 3200+ that did 2.7GHz in its day

This is a cross-post from another thread discussing the same problem.
It is not documented anywhere in the MSI manual, but the problem is the VGA and TV Out video ports share the same RAMDAC (video channel) and cannot both be active at the same time. Or if they can (I have a discrete ATI card that allows this), it is not yet supported in the driver.
Thus, the only way you can get TV Out with the VGA port in use is to use *only* TV Out. You can do this in Catalyst Control Center by dragging the image of the TV or HDTV in the "Displays connected but not in use" list to the "Main Monitor" (CRT) above the list and selecting the only available option, "Swap". This will enable TV Out and disable your CRT. Do the reverse to re-enable the CRT & disable the TV Out. You can I'm sure assign these two configurations to hotkeys (I usually use Ctrl-Alt-F1 for normal, & Ctrl-Alt-F2 for TV Out).
I assume with a DVI monitor plugged in that both the digital flat panel and TV Out could be active at the same time, but I haven't tested this. I will get a chance to in the coming week though.
If you have an LCD flat panel with both VGA and DVI plugs, try using a DVI cable instead to enable dual displays. If you don't have one already order from ComputerCableStore.com, which I have found the cheapest anywhere (DVI cables start at under $14 before shipping; the local big box stores sell them for $40-$130(!) in comparison).
Otherwise, you may have to buy a new DVI-capable LCD monitor to enable this functionality. If you do pay attention to what comes in the box - I just bought a Samsung 19" display for around $300 and it didn't include a DVI cable in the box. It may or may not make sense to order the cable separately depending on the price difference for models that do or do not include a cable. If you are not sure if a cable is included with a particular model, see if it is listed on NewEgg.com - their product pages are the best on the web and usually include pictures of the contents of boxes, as well as links directly to the manufacturer's product page which often list detailed specs.

Power of the Press - MSI Neo4 SLI Bios Problem

For those interested, I just sent this to hardocp because they did the review on the MSI SLI Platinum. Since MSI headlines this review on their website, maybe hardocp can do something about this bios problem. Enjoy and please send more emails to hardocp so we can get this problem addressed! Believe me, Ive seen this works with washington politicians, I know it can work if we all do it.
I appreciate companies like yours doing extensive reviews about products. However, your review caused me and a whole bunch of others to purchase this board with enormous problems associated with it (check out the msi forums). The problem is that this board works only for 130nm chips in which you tested on. On the newer amd 90nm chips, this board is the worst performing sli board out in the marketplace (for both winni and venice core chips). You need to do something to stop people from buying this board because its just awful and the folks from MSI are silent on the subject.
It's gotten so bad that people have gone out and purchased other sli boards, transferred all of the equipment out of it and into the new one and guess what...voila, no problems. Anyway, some of those in the other user forums had the same problem but those other manufacturers quickly fixed the problem. Its just getting worse and worse. I feel like both msi (and I am MAD) and reviewers like you (unless you don't know about the problem) are silent on this and its cost me hard earned MONEY ($175 for the mobo) and hours and hours of time...
You have a LOT OF POWER with MSI and I can see it because they headline your review on their website (power of the press). For Gods sake, please do something before others make the same mistake or if you can get MSI to allocate resources to fix the problem...you would be HEROs! Thank you.

Quote from: Husker_Faithful on 19-May-05, 11:56:11
Ok, I guess I am confused some, where is the issue with the new cores? I have no issues running the San Diego core and the my memory at the listed and published speeds.....
Quote
Also is your MOBO the SLI type? I run the SLI Neo4 with a San Diego core without any issues. In fact I dropped it in and booted using the San Diego as a direct replacement for a older (if 6 months is old!!) 3500. I have OC'ed with Corecetner as far as I can push it and runs awesome!
Quote
GUys, I am not sure exactly what issues you are experiencing as there can be MANY factors! But my SLI Neo is running awesome! It overclocks (no Tiresmoke, i won't go into that in this forum ) and has NEVER once BSOD, or rebooted or even crashed! Not once and I push the crap out of this as it is my gaming box. Also TS you are SO correct on the clock settings on the ultras, you gotts make sure they are the same or it will cause issues. The only thing I am kinda bummed about is the lack of real performance with the dual 6800 Ultra's, but that is a Nvidia issue not MSI. Guys I may be blessed, but I have run three Neo MSI brds, 2 939 and 1 754 and never had any issues....
Quote
I have yet to experience any boot/reboot issues...So I think we should wait to hear more from this person before we assume anything...
Quote
I have the nForce4 SLI brd and i run a new San Diego..it booted up fine and zero problems. But man is this thing FAST
Quote
According to MSI, the Neo4 will work fine with the new cores, the Neo2 will need a bios upgrade
Quote
I set my brd up the first time for SLI with dual cards and have never had any issues..Sorry guys, but I guess it's the luck of the draw, but I have yet to ever ave an issue with any MSI brds..I have a Neo2,Neo4 and the older 754 slot Neo..no issues.
7 of your last 11 posts. Why man? Why?
This is from MSI at the "listed and published speeds"
Dear Customer,
Since the mb has not been certified to support the Venice and San Diego Core processors, please wait until beginning of June, 2005 for the release bios support for the mb.
Sincerely,
Technical Support Division
MSI Computer Corp.
As for overclocking have you read these?
https://forum-en.msi.com/index.php?topic=75897.0
https://forum-en.msi.com/index.php?topic=79534.0
https://forum-en.msi.com/index.php?topic=79827.0
Look, I have already been threatened to be banned because of my sarcastic replies to you. Read every one of your responses I listed. Obviously OTHERS are having problems. WHY don't you help them instead of TAUNTING people that yours works. They are upset, and you make them feel dumb like it's their fault.
Man I have tried to contribute so much to this issue that at least 20 different members here are having, I have tested with an Asus SLI board, I have tried different BIOS's and posted results, I have theorized with others and I feel like you are slapping me in the face by restating time and time again "what problem mine works great"i
I'm on a verbal warning because I didn't have respect for you. Well how are you respecting the other people who have problems by saying you don't know what their issue is. Read up on it or help them, instead of creating tension. Please?

Time out problem in BPS

BPS friends,
We have a planning function to copy Versions based with some filters. The copy function takes 5 hours and times out after that. The function is reaching max buffer size as recommended by SAP so we cant increase the buffer size anymore.
We are on BW-BPS 3.5.
How can I solve this time out problem? Please respond to me.

Hi Pat,
How many record did you copy ??
Could you restrict the copy in not 1 package ??
Package per package ...
I suggest you ..
e.g. you have restriction by a 0CALMONTH / something ..
Then,
You can copy e.g. for January to March, then March to August, etc.
You can automate it by planning sequence.
Hopefully it can help you a lot.
Regards,
Niel.
thanks for the points you choose to assign.

AirTunes with AirportExpress cut or drop out problems - my solution...

I buyed 2 of the Airport Extreme one month ago (Firmware 6.3, Itunes 7.1.1), never got them working fine, till yesterday...
I have A Zyxel ADSL WLAN Router Switch. WPA-PSK as I wanted a secure Network. Both of the AX were connected with static IPs. WLAN was always working fine, but I had many cut outs with airtunes. I wanted a solution with lossles streaming audio with the possibility to connect my Receiver digitally. That's why I bought my first Apple hardware, as I was always told, Apple=Plug'n play. Very frustrating!
I tried other switches, Routers, WLAN adapters and cards, nothing worked. Airfoil does not support multiple speakers yet, so it's useless for me.
In the FAQ of the Airtunes, Apple mentioned to use lower security, as some Computers probably do not have enough power to stream music flawlessly. But my Computers really do have enough power! I think the AX does not have enough power to do that. So I created another wireless network with one of my AX. I set the security to WEP-40bit key and joined this new Network with my other AX. Not the best solution, as I'm now connected to the Internet or to the AX to use Airtunes. Cables could fix that problem, but then I could use a wired system instead...
I use Channel 11 for the AX WLAN (the only clean channel in my area), Multicast to 11, only G mode for Wireless and a 5 characters WEP-40 key and no WDS. Seems to work at the moment.
I hope this will help others with the cut or drop out problem. If you have a working AirTunes system, please post your setup. Mostly I'm interested in a Setup with working WPA...

Thanks, I hope I can help others with this annoying problem...
Sorry, I forgot to write about the RF Interference. Belive me, I spent hours and hours searching for a solution in the Internet and every checkbox the Admin utility offered me to try out... I'm working as a system engineer, and supporting computer systems since the early 90ties, so I'd say I have a bit knowledge about all the networking, WLAN, Audio... In school we had the Apple Mac I with the 12" monochrome monitor and appletalk for networking quite funny!
But back to the RF interference: At the moment I activated it on both AX I own. I have a microwave, wireless phone and I'm living in a Area with many WLAN access points. I can choose between 6 networks!
I'm the only one with a network higher than channel 6, so this area is clean at least.
As my AirTunes do work at the moment, I'm not going to try if I could also deactivate it.
Next step is to try if I can connect the AX Router to the internet. A connection to my ADSL router should do that, but up to now I had very strange behavior when plugging in a ethernet cable to the AX. If this will work, it will be my final solution, at the moment I only see it as a workaround...

The Video Out Problem...Fixed?

I know Wikipedia can be edited by virtually anyone with membership and an opinion, but I had to know.
It said that an itunes update 1.0.2 fixed the video out problem...does that mean that videos can now be connected to a TV and play on the TV? They fixed that?
I am still ever in the market for the nano, just waiting until the right ammount of money to purchase one. Thanks

I think it is currently working according to this knowledgebase article: http://docs.info.apple.com/article.html?artnum=300233
That is, for the new Nano, you can use the older iPod Universal Dock (ie the normal one that has been available for a couple of years) together with an iPod composite video cable or an SVideo cable (ie all currently-available stuff you may have already bought for a previous-series video iPod), OR you can use the brand new "Apple Universal Dock" with the brand new Apple Composite AV Cable or with the (new) Apple Component AV Cable, OR you can use one of those brand new Apple AV Cables directly with the Nano (without the new Apple Universal Dock).
What you cannot do is connect an old video cable or accessory, which was expecting to get composite video from the RCA/audio jack on the Nano, because it looks like (on the new Nano and the Classic) the audio out jack is now just for audio out and video is only available via the dock connector on the iPod.
ted.h.

SB Xtreme Audio Notebook optical out problem with Home TheaterSystem-HELP!

JSB Xtreme Audio Notebook optical out problem with Home TheaterSystem-HELP!, I have this sound card connected?(optical OUT) ?to my home?theater system's digital IN ?through the recommended /8in. optical miniplug-to-optical SPDIF cable. Theater system is set correctly to Digital-In mode. I have no sound!
The cable is a Velocity Toslink-to-Optical Mini Plug digital cable. I don't see any settings in the Creative Console Launcher. The notebook is a Dell XPS M730 (Vista 32).
I have a PS3, DirecTV, and the SB Xtreme Audio Notebook cable on a hub switch that connects to the system's?one Optical IN. The PS3 and DirecTV sound perfect!
The sound card works fine with standard PC speakers. I'm at a loss as?to what to try next. I set this whole system up myself, so I'm pretty good at working out the kinks, except this one!
Karen

OK. I just went to Control Panel - Sound - Playback - Digital Output Device (SB Xtreme Audio Notebook) - Properties - Advanced. I experimented with different sample rates and bit depths. Clicked the test button and lo and behold - sound from the HTS! I've tried iTunes, PowerDVD (configured to digital output) and YouTube - no sound! Am I missing something really obvious?
HA! Just backed out to Playback and selected Digital Output Device (SPDIF) and set as Default. Sound is emunating from HTS! Well, that mystery is solved! Who knew.
Thanks anyway! Any comments or advice will still be appreciated.

K7N420 pro MSI 6952 TV-Out Riser Card troubles

just wondering if anyone has gotten the MSI 6952 TV-Out Riser Card to go with their K7N420 pro motherboard and if so how do you get it to work as ive tried for months on end and i still have many failed attempts at getting it to function

It is your drivers. You need to get the 29.XX series of detonator drivers and use those to get tv-out to function.
I had a K7N420 and a tv-out card... long dead, exploded caps. I recall that the last version of the detonators that worked for sure was the 29.20s. I experience the same difficulty with my geforce3 Ti500 and the new drivers... no tv-out signal as the drivers cannot seem to detect the presence of a tv on the other end of the svideo cable.
Try it out and see if it works

IPod Nano Grey Out Problem in iTunes??

I purchased my iPod Shuffle last year. I installed iTunes in my Window PC and purchased music via the music store.
A month ago, I purchased a iPod Nano, I added the iPod Nano to iTunes. iTunes will update my iPod Nano automatically when I connect it to my computer.
However, all the songs in my iPod Nano menu in iTunes appear 'grey out'. I can't do anything like delete, play them etc??
Can anybody advise me how to solve this 'grey out' problem?
Thanks,
Jacky

Welcome to Apple Discussions!
If you update automatically, the songs are grayed out, because the songs should be on your computer.
To delete songs, you can uncheck the songs/podcasts you don't want on your iPod in iTunes. Then connect your iPod to the computer. When it appears in iTunes, go to edit-->preferences. Click the iPod tab, then the music tab under that. Check "Only Update Checked Songs" and click OK. Only checked songs will be put onto the iPod.
See this for more ideas/tips...
Deleting songs or playlists from your iPod
To be able to play songs on the iPod through the computer, delete songs only on the iPod (without having to check and uncheck), and to have songs not grayed out, you would have to manually update. Songs would no longer automatically update onto the iPod. You would have to drag new songs that you want on your iPod onto it (through iTunes)...
Managing Your Songs Manually
btabz

Are you ever going to fix the "You've been signed out" problem?

I've gone through forums and your trouble shooting page and I've found a lot of angry customers over thus Creative Cloud "You've been signed out" problem. Fortunately for me, I'm not a customer. I installed it so I could download a trial or premiere with the intention to buy, but now I don't need the trial because this is issue has made up my mind. But I am still curious if you're ever going to fix it?

This is a user forum please open a problem report over at http://feedback.photoshop.com/photoshop_family/

I have Photoshop CS purchased many years ago for a LOT of money. Other day went to use it, got msg. "computer configuration changed, need to re-activate". Tried that for days, didn't work. Cannot call ANYONE to find out problem. Am not very computer l

I have Photoshop CS, purchased many years ago for a LOT of money. Other day went to use it, got msg. "computer configuration changed, need to re-activate. Tried that for days, didn't work. Cannot call ANYONE to find out problem. Am not very computer literate, so don't understand what that means. LOVE the CS program and know how to use it, so don't want to have to learn something new. Don't know what to do. Went to all the big name stores and no one can tell me anything, like what happened to CS or what is replacing it that is the same as CS. CAN SOMEONE PLEASE HELP!!!

jd49034389 wrote:
down further there is a Photoshop CS2, do I just do that one?
Yep. That's the one. Make sure to use the supplied key on the download page, not your old one.
Good luck.
--OB

Error out problems with measuring frequency VI

I am having some error out problems with measure frequency VI. The instructions is change error out from indicator to control but does not work. Anyone can help? The VI is attached
Attachments:
Measure Frequency VI error.vi ‏27 KB

This VI does not have an error out. Obviously, you replaced a subVI that did have an error out with this one, otherwise you would not have been able to create this wire.
Simply remove the wire or save the subVI with another name then modify it to have the error out that you are looking for.
Hope that this helps,
Bob
Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
DISTek Integration, Inc. - NI Alliance Member
mailto:[email protected]

MSI TI4800 Tv-Out problem

Similar Messages

Maybe you are looking for