MSI ti4800se 8xagp widows xp & Flight Sim 2004 HELP!

Can any one help? I am finding it impossable to run Flightsim 2004 with XP pro and MSI Ti 4800 8xAGP Can't find any Nvidia Driver to run it can any of you good folks point me to the correct drivers and down load site ?
Thanks Paul

Paul,
I have run FS2k4 with the 45.23 DetonatorFX Drivers from the nVidia Website on a GeForce4 Ti4800. Everything worked great as long as you do NOT set Anisotropic Filtering to 8X.
Take Care,
Richard

Similar Messages

  • XP SP 2 and Flight Sim 2004 vs Bootcamp = no audio

    Hi I've got a 27" imac and have installed XP SP2. I'm running OS 10.6.2 and have installed Microsoft Flight Sim 2004. I can't get any audio when running the flight sim. Have managed to get basic sounds in windows by changing one setting which was an improvement but thats it.
    I'm also wondering what screen res would be the best choice in Microsoft Flight sim. They give you about 1 million options. What is best? Can anyone help?

    Well, I'm making progress - of a sort.
    The Sharp connects via AV (Video + 1 audio channel) to the Sony Z1P. Fine
    The Z1P "captures" the Sharp's footage to tape (it seems the Sony won't "pass-thru" directly - oh, well...). Video AND audio are faithfully recorded, as they play back rather well on the Z1P's LCD screen.
    Now, the Z1P uses what appears to be a proprietary Sony "iLink" cable - it looks like a 4-pin to 4-pin IEEE1394 cable - and my computer's firewire input socket is a 6-pin. Tried a 4-pin to 6-pin cable - didn't work. Couldn't identify the camera. There must be something about the Sony iLink cable, huh?
    So, I have an older laptop with a 4-pin socket, and grab the footage that way. Fine, but the laptop can't keep up and drops frames all over the place. At least I 've got both video and audio, now.
    I was capturing using WMM at DV-AVI running at 25MB/sec and that's obviously too much for this little laptop. WMM has a lot of slow bandwidth options, ranging from 28.8KB/sec to 768KB/sec, then DV-AVI at 25MB/sec - nothing in between.
    I think I'm going to buy a firewire adapter with a 4-pin socket.

  • Flight Sim keyboard shortcuts

    Has anyone got the keyboard shortcuts / commands for Flight Sim on an iMac running Windows?  As in Bootcamp Window.
    I looked an someone spoke aobut comcast, but that's not the case here.
    It used to be F1-F4 did engine speeds, and F5-F8 did flaps, but doesn't work with the newer iMac aluminum keyboard.  (which btw I don't like, too flat and I get zapped touching it after walking across the room.)
    Cheers
    Tom

    perhaps this thread or others in the "more like this" section next to it might help : https://discussions.apple.com/thread/3167143?start=0&tstart=0.  If you have already read them, I'm sorry, I am not a mindreader, which is also why I did not know that you already searched the Flight Simulator 9 or FX forums.

  • MSI Ti4800SE and MSI KT4V motherboard incompatible?

    Yesterday I bought an MSI Ti4800SE to replace a GeForce2. It booted up fine and Windows detected it and installed the drivers. However, on rebooting, the monitor went blank and there was a series of beeps.
    The computer would not start. I tried taking out all the other cards and tried the video card in 2 other computers but all I got was the beeps. I took the card back and got a refund as they had no more in stock.
    Is the video card incompatible with the motherboard for some reason? Did I somehow cause the card to die? Should I buy another or will the same thing happen again?
    Any help would be much appreciated.
    My system is
    MSI KT4V motherboard
    Athlon 2500
    512Mb Kingston RAM
    SB Live
    Network card
    56k Modem
    2 hard drives
    DVD ROM
    Mitsumi CD writer
    350W PSU
    Windows 98SE
    Thanks in advance

    Thanks very much for your advice - looks like I need to spend yet more money then!
    But do you think I damaged the card by not supplying enough current, bearing in mind that it booted OK the first time? Or was it not damaged at all?

  • Are the iMacs able to handle Flight Sims?

    My iMac is an early intel version with a 2.16 GHz cpu and 2.0 GB ram with the nVidia 7600 GT video card. Can someone please tell me if the flight sim 'X-Plane' would work with this platform? I have not picked up any joysticks or control wheels as I wasn't sure whether or not the computer was flight sim capable or not.
    My old dell pc was to some degree, but it was too old to modify enough to make flight sim games worthwhile. Any help would be appreciated.

    Off the top of my head I would expect it to work just fine. You can download the demo of version 8 and see how it goes. You can drive with the mouse and keyboard in the demo mode for about 10 minutes. It's a big download, but worth the wait.
    You've probably already discovered x-plane.org? It's a web site for rabid x-plane fans. I'd post your question there and I'm suspecting you'll get a lot of responses. They are pretty helpful in my experience.
    FYI - I'm running x-plane version 8 on my iMac without a hitch. There is actually one small hitch in the video drivers for my Mac (uses a ATI card) that does not display runway lights properly, but I think that should not be an issue for you. (The X-plane author claims it is an Apple/ATI deficiency in the video drivers for the new iMac. Version 9 works around the problem I am told).

  • MSI TI4800SE supported resolutions.

    I have a MSI TI4800SE and my old monitor died recently, and I have been thinking about getting a widescreen monitor to replace the old one. All the ones I have seen have a warning stating to make sure your card can support the resolution(1440x900 or 1680x1050). I do not see either of those resolutions in the manual, but it does say the actual settings may be different because of different monitors. So you can see why I am a bit confused.  So if I do decide to get a widescreen monitor am I going to also have to get a new graphics card to fully utilize the monitor?

    piercedfreak,
    Quote
    Supports super high resolution graphics modes
       640x480      8/16/32   bit colors with   150Hz
       800x600      8/16/32   bit colors with   150Hz
       1024x768    8/16/32   bit colors with   120Hz
       1152x864    8/16/32   bit colors with   120Hz
       1280x1024  8/16/32   bit colors with   100Hz
       1600x1200  8/16/32   bit colors with     85Hz
       1920x1200  8/16/32   bit colors with     75Hz
       2048x1536  8/16/32   bit colors with     60Hz
    Take Care,
    Richard

  • T61P won't read flight sim X

    As the subject line says, my DVD-RW drive doesn't recognize MS Flight Sim X when the disc is put in the drive. It spins up but shortly after spins back down. When that disc is in, the computer basically locks up, although the mouse cursor still moves, but the drive will not eject the disc and the only thing I can do with the computer is to hold down the power button and shut it down. The only way I can try and view the volume in the DVD drive is to restart with the flight sim disc already in, but when windows explorer opens up, it freezes and doesn't show anything in the drive. I know the discs are good, as they load with no problem in my wife's HP laptop with Vista and my desktop with XP. My T61p has Win XP and has no problem recognizing any other CD or DVD that I put in the drive. Anybody have any thoughts?

    What is the exact wording of the error message you receive?
    Has the iPhone been jailbroken or modified to work with other
    than the original wireless provider?
    Have you installed one of the iOS 7 beta versions on that iPhone?

  • Flight Sim X

    I m trying to load Flight Sim X in my Touch Smart 300 / 64bit / windows 7, but my DVD reader cannot read it!!!!
    Does someone has the same problem? When I go to my computer, DVD drive shows nothing in it, can't read

    Brunno, welcome to the forum.
    It sounds like you may have a bad FltSim X disc.  I suggest trying the disc in a friends computer to see if it works.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Clocking MSI Ti4800SE-TD8X(MS-8900)

    Hi everyone! My question is: Can I clock my card to 300/650 without any extra cooling?? I have heard this somewhere that with the big fan on my VGA-card I can easily do so, but I thought maybe I should get some expert help before doing so if possible! So everyone who knows wheter it is possible to clock my MSI Ti4800SE-TD8X(MS-8900) (currenlty @ 275/554) to 300/650 please post a reply, bye!  :D

    ApA,
    When you get to those speeds it will be hit or miss. One board might, while an identical will not. It is all the luck of the draw with the RAM.
    Take Care,
    Richard

  • Microsoft Flight Sim question

    Hello!
    I really would like to play Microsoft Flight Sim on my iMac. I was wondering, if install XP, would Flight Sim work at 100% or should I get a cheap PC?
    Thanks!
    James

    Running Windows on a Mac through Boot Camp is no different then running Windows on any other PC. So if Fligh Sim runs on Windows, it will run on your Mac.

  • Msi Ti4800SE VTD8X problem???

    Hi
    I've just got myself a Msi Ti4800SE VTD8X, and i checked for the total video memory using 3DMark2001, 3Dmark2003 and sisoft sandra2003.  They all show the same information, which are 64M, sometimes 32M., somtimes 0M, and sometimes 128M (though not too often at 128M). The information differs each time after rebooting the system.
    However, when i play games it seems fine.
    Please tell me if it could have been a problem with the video memory, or the software that i've used.
    and what should i do?
    oh...I'm using windowsXP pro (service pack 1).
    the power supply is Antec 550W TrueControl.
    thanks

    Hola Exequiel,
    One thing I forgot, you Desktop. There is no reason to run your desktop at 32bit color, set it to 16 bit.  Running your desktop at 32bit color means any games will have to render your desktop in the background in 32bit color even though you cannot see it.
    As for overclocking, if your 2200+ is the old Tbred A, it is a very poor overclocker, if it is the Tbred B, then you can really overclock it. (There are manual settings on your motherboard, but if you do not have really good cooling I would not do it.)
    As for your Vid Card, you get a great boost in performance by overclocking the RAM than the Core. Before you start, you must be happy with the fact you could destroy the card and end uo with an expensive new key chain. 8o I use 3DMark2001SE to test my overclock. If I were to overclock your card, I would bump the core and RAM 15Mhz the first time. Then from there only bump the RAM a couple of Mhz at a time and run the Benchmark. If it locks the computer up, turn the computer off and lower your settings. If you see garbage on the screen hit the esc key, lower your overclock and test again till you know it is stable.
    But remember this can destroy your card and you will be without a video card and need to buy a new one.
    Saludos,
    Ricardo

  • K7N2G + MSI Ti4800SE = no 8x AGP???

    Hi all
    I just bought a new MSI K7NG2 mobo and an MSI Ti4800SE-VTD8X (MS-8900) and can't get them to work in 8x AGP.
    I have enabled 8x support in the bios (ver 2.1) but 3DMark2001SE still reports it running 4x, though it identifies support for 8x
    In it's current state the graphics card is running a lot slower than it did in my K7N420Pro mobo. (a 3dmark score of 7000 compared to 10000 before)
    I'm using an AthlonXP2400+ 266FSB and 512MB of PC2100 (266Mhz) 2 sticks in DDR slots 2 and 3
    Does anyoone know how to make them run in 8x mode?
    Thanks in advance

    I've tried downloading the 2.03 version fron nVidia and it wont load.
    It unpacks all the files then just quits as soon as it starts loading the intall wizard (all it does is show the nVidia logo and then close)
    I unloaded the drivers which came with the CD  I had on and tried again and now can't load them either, so not sure which version they were
    help!

  • HT4623 i update my At&T iphone 4 (4.2.1) to ios 6.1.3 using itunes and now its giving activation error. i dont have At&t sim.please help

    i update my iphone 4 version 4.2.1
    i connected in itunes in DFU mode the update it
    i automaticcaly apdated to ios 6.1.3
    now its givng acticvation error
    the set is from At&T and i dont have the sim
    please help.

    All iPhones REQUIRE a SIM for activation.  There is no way around this.

  • Ann: Authorware Web Player 2004 Helper update

    Hello Authorwarians,
    A bug in my Authorware Web Player 2004 Helper was just
    uncovered. It was poking a misspelt cab reference "awswaxd.cab"
    into Authorware's OBP.INI file, which when then written into html
    for web deployment of applications, would fail to call up the
    player properly.
    This problem occurred from July 2006 when I updated the
    product to handle libraries properly. Unfortunately, it was at that
    time that I somehow mucked up the reference, as it was correct for
    the two years previously. Since it's only poked in once, I never
    caught it on my own systems.
    I have placed a corrected version at
    http://www.clickcraft.com/ko/AW2004WebPlayerHelper.zip.
    Please obtain it and replace the commands in your AW6.5 and/or AW7
    folders.
    I apologise profusely for the trouble this has surely caused
    a few of you. I only wish I'd found out earlier.
    Best,

    Ron
    No one in their right mind is going to be upset by a small
    error like
    this in a tool you provide for free. This is a great tool and
    thanks
    very much for providing it.
    Mark
    Ron Lubensky wrote:
    > Hello Authorwarians,
    >
    > A bug in my Authorware Web Player 2004 Helper was just
    uncovered. It was
    > poking a misspelt cab reference "awswaxd.cab" into
    Authorware's OBP.INI file,
    > which when then written into html for web deployment of
    applications, would
    > fail to call up the player properly.
    >
    > This problem occurred from July 2006 when I updated the
    product to handle
    > libraries properly. Unfortunately, it was at that time
    that I somehow mucked up
    > the reference, as it was correct for the two years
    previously. Since it's only
    > poked in once, I never caught it on my own systems.
    >
    > I have placed a corrected version at
    >
    http://www.clickcraft.com/ko/AW2004WebPlayerHelper.zip.
    Please obtain it and
    > replace the commands in your AW6.5 and/or AW7 folders.
    >
    > I apologise profusely for the trouble this has surely
    caused a few of you. I
    > only wish I'd found out earlier.
    >
    > Best,
    >
    >
    Authorware Media Synchronization Command:
    www.authorwarextras.co.uk --> Commands
    Media Synchronization made easy !
    EuroTAAC eLearning 2007
    www.eurotaac.com
    www.AuthorwareXtras.co.uk
    www.freelists.org/list/flashelearning

  • TS3992 i got problem updating my iphone 3g. my phone doesn't work now. it says no service and can not be activated.beside that it says insert sim even it has sim. please help me.

    i got problem updating my iphone 3g. my phone doesn't work now. it says no service and can not be activated.beside that it says insert sim even it has sim. please help me.

    I have just created this account to tell you that nothing would change if you restored your phone.
    The first NO SIM nuisance happened just a week ago. Nothing had been done to the phone before that. I pressed HOME + POWER buttons to restart the phone and SIM card was successfully recognized as if nothing had happened. Then I had a lucky week, not reminded of this issue at all.
    Today, however, the same problem keeps annoying me. I've used the same method to heal the phone but all I have done seems more like a placebo. So I tried the ultimate solution, restroing it in iTunes.
    Ridicuously, the moment I finished basic setup on the newly restored phone, the same NO SIM CARD INSTALLED message poped up.
    So IMO, it's not what you should do to erase and restore your phone.
    Plus, I called my native carrier and they said no such problems have been submitted. And since my nano SIM card is quite new (three months old), I'm not going to replace it.
    I googled this problem and found something on a Hong Kong webpage. The author of that thread points out that there is a flaw in the SIM card tray that prevents the phone from successfully recognizing SIM cards.
    And I really hope Apple could probe into this issue and give official solutions other than restarting / restoring the phone like an idiot.

Maybe you are looking for

  • Transfering data from one account to another

    I just discovered that the user files from the second account on my iMac g5 have somehow transfered into the trash of my first account( which is my main one).I was getting in the second account the following dropdown message- " the home folder is not

  • Itunes will not open on my mac

    What do you do if your itunes stops opening on your mac

  • Creating smartform from attachment list of service object

    Hi,    How can i create a smartform containing attachment list from generic object services(active workflow Box) in tcode VA02, Also let me know in which table this attachment lists are stored. Thanks,    JP

  • Driving my eardrums into my brain...

    I couldn't find a similar problem on the forum, so let me describe what happens to me. To start off I know for a fact that the volume adjustment on all my songs is on 0% (in the middle, unchanged, whatever it's called). I've also switched off the vol

  • Music Stutter when playing music in itunes

    My music stutters when I scroll or do something in another application when I am playing music in itunes at the same time. They have updated itunes since it started but it didn't fix the problem, in fact I think they made it worse.