MSI TI4800SE - Stereo Drivers

I am not happy. I just spent $200 on this video card and it seems I can't use my X3d glasses with it. When I loaded the new drivers (both the graphic and stereo) the stereo properties tab disappears. Has there been a fix for this yet?

Smokey87,
I do not know if you will get any better benchmark scores or not but you should gain better stability. 
Take Care,
Richard

Similar Messages

  • MSI Ti4800SE and MSI KT4V motherboard incompatible?

    Yesterday I bought an MSI Ti4800SE to replace a GeForce2. It booted up fine and Windows detected it and installed the drivers. However, on rebooting, the monitor went blank and there was a series of beeps.
    The computer would not start. I tried taking out all the other cards and tried the video card in 2 other computers but all I got was the beeps. I took the card back and got a refund as they had no more in stock.
    Is the video card incompatible with the motherboard for some reason? Did I somehow cause the card to die? Should I buy another or will the same thing happen again?
    Any help would be much appreciated.
    My system is
    MSI KT4V motherboard
    Athlon 2500
    512Mb Kingston RAM
    SB Live
    Network card
    56k Modem
    2 hard drives
    DVD ROM
    Mitsumi CD writer
    350W PSU
    Windows 98SE
    Thanks in advance

    Thanks very much for your advice - looks like I need to spend yet more money then!
    But do you think I damaged the card by not supplying enough current, bearing in mind that it booted OK the first time? Or was it not damaged at all?

  • K7N2G + MSI Ti4800SE = no 8x AGP???

    Hi all
    I just bought a new MSI K7NG2 mobo and an MSI Ti4800SE-VTD8X (MS-8900) and can't get them to work in 8x AGP.
    I have enabled 8x support in the bios (ver 2.1) but 3DMark2001SE still reports it running 4x, though it identifies support for 8x
    In it's current state the graphics card is running a lot slower than it did in my K7N420Pro mobo. (a 3dmark score of 7000 compared to 10000 before)
    I'm using an AthlonXP2400+ 266FSB and 512MB of PC2100 (266Mhz) 2 sticks in DDR slots 2 and 3
    Does anyoone know how to make them run in 8x mode?
    Thanks in advance

    I've tried downloading the 2.03 version fron nVidia and it wont load.
    It unpacks all the files then just quits as soon as it starts loading the intall wizard (all it does is show the nVidia logo and then close)
    I unloaded the drivers which came with the CD  I had on and tried again and now can't load them either, so not sure which version they were
    help!

  • Stereo drivers

    Can you install say 30.87 stereo drivers and run the 4072 vga drivers and still have stereo properties? I heard if you put the 4072 drivers you loose the ability to change your stereo properties. Could someone fill me in?
    I would like to see if I cant get my 3d glasses working in XP

    I tried using that feature too but if you look at your video adapter properties I'll almost say that it says that your video adapter is still using the 4072 driver and everything else is like it was. This was what happened to me. My suggestion to you unless some one else replys is to do this go into control panel and remove your video adapter then go to add and remove programs and remove your video drivers and stereo drivers. And reinstall everything just like it was.And you should get your stereo tab back. The last video driver that will let you keep your stereo properties are 4041 I believe so dont put any higher number than this.Stereo drivers that work with the 4041's are the 3087 stereo drivers.So if you would want to D/l them before you remove your other ones you could. Man I hope this helps you out!

  • 3d stereo drivers?

    Hi
    Is there somhow to enable 3d stereo (red/blue glasses) on the Imac - like it is with Nvidia stereo drivers on a pc?
    Best rgds
    /Jan - Denmark

    A lot of people searched dvd video converter on the internet . DVD Video Converter can solve some problem, the main function is to convert DVD to MP4, AVI, MPEG, WMV, 3GP, MP3, WMA etc.
    A dvd converter for video fans is not enough. So, a dvd suite is the best choice. I found 4Videosoft DVD Converter Suite.
    It is the combination of DVD Ripper Platinum and Video Converter Platinum software. It can convert DVD to MP4, convert DVD movie to MPEG, MOV, 3GP, MP3 etc with super fastest DVD conversion speed. Also, It is easy to convert videos between MPG, MPEG, MPEG2, VOB, MP4, M4V, RM, RMVB, WMV, etc and extract audio from these video.
    dvd converter suite = DVD Rip + Total Video Converter
    Key Functions
    1.Convert DVD movie to video/audio
    Powerful DVD Converter to convert DVD movie to MP4, AVI, MPEG, WMV, 3GP, MP3, WMA etc by DVD Ripper Platinum. 
    2.Convert video files to any other format you want
    Versatile video file converter to convert videos between MPG, MPEG, MPEG2, VOB, MP4, M4V, RM, RMVB, WMV, etc and extract audio from these video by Video Converter Platinum.
    3.Merge, trim, crop – multifunctional editing functions
    Merge several files into one for your successive enjoyment, get any time length segments from your DVD movie or video files, crop the DVD movie or video files play region and adjust the output aspect ratio with the help of 4Videosoft DVD Converter Suite.
    4.Customize output video files.
    Adjust the DVD movie Brightness, Contrast, Saturation, and Volume. Set the video Encoder, Resolution, Frame Rate and Video Bitrate by using the DVD Converter Suite.
    At the same time,share some practical tools for mac users:
    iPhone Ringtone Maker for Mac
    iPod to Mac Transfer
    iPod Manager for Mac

  • MSI TI4800SE supported resolutions.

    I have a MSI TI4800SE and my old monitor died recently, and I have been thinking about getting a widescreen monitor to replace the old one. All the ones I have seen have a warning stating to make sure your card can support the resolution(1440x900 or 1680x1050). I do not see either of those resolutions in the manual, but it does say the actual settings may be different because of different monitors. So you can see why I am a bit confused.  So if I do decide to get a widescreen monitor am I going to also have to get a new graphics card to fully utilize the monitor?

    piercedfreak,
    Quote
    Supports super high resolution graphics modes
       640x480      8/16/32   bit colors with   150Hz
       800x600      8/16/32   bit colors with   150Hz
       1024x768    8/16/32   bit colors with   120Hz
       1152x864    8/16/32   bit colors with   120Hz
       1280x1024  8/16/32   bit colors with   100Hz
       1600x1200  8/16/32   bit colors with     85Hz
       1920x1200  8/16/32   bit colors with     75Hz
       2048x1536  8/16/32   bit colors with     60Hz
    Take Care,
    Richard

  • Clocking MSI Ti4800SE-TD8X(MS-8900)

    Hi everyone! My question is: Can I clock my card to 300/650 without any extra cooling?? I have heard this somewhere that with the big fan on my VGA-card I can easily do so, but I thought maybe I should get some expert help before doing so if possible! So everyone who knows wheter it is possible to clock my MSI Ti4800SE-TD8X(MS-8900) (currenlty @ 275/554) to 300/650 please post a reply, bye!  :D

    ApA,
    When you get to those speeds it will be hit or miss. One board might, while an identical will not. It is all the luck of the draw with the RAM.
    Take Care,
    Richard

  • Msi Ti4800SE VTD8X problem???

    Hi
    I've just got myself a Msi Ti4800SE VTD8X, and i checked for the total video memory using 3DMark2001, 3Dmark2003 and sisoft sandra2003.  They all show the same information, which are 64M, sometimes 32M., somtimes 0M, and sometimes 128M (though not too often at 128M). The information differs each time after rebooting the system.
    However, when i play games it seems fine.
    Please tell me if it could have been a problem with the video memory, or the software that i've used.
    and what should i do?
    oh...I'm using windowsXP pro (service pack 1).
    the power supply is Antec 550W TrueControl.
    thanks

    Hola Exequiel,
    One thing I forgot, you Desktop. There is no reason to run your desktop at 32bit color, set it to 16 bit.  Running your desktop at 32bit color means any games will have to render your desktop in the background in 32bit color even though you cannot see it.
    As for overclocking, if your 2200+ is the old Tbred A, it is a very poor overclocker, if it is the Tbred B, then you can really overclock it. (There are manual settings on your motherboard, but if you do not have really good cooling I would not do it.)
    As for your Vid Card, you get a great boost in performance by overclocking the RAM than the Core. Before you start, you must be happy with the fact you could destroy the card and end uo with an expensive new key chain. 8o I use 3DMark2001SE to test my overclock. If I were to overclock your card, I would bump the core and RAM 15Mhz the first time. Then from there only bump the RAM a couple of Mhz at a time and run the Benchmark. If it locks the computer up, turn the computer off and lower your settings. If you see garbage on the screen hit the esc key, lower your overclock and test again till you know it is stable.
    But remember this can destroy your card and you will be without a video card and need to buy a new one.
    Saludos,
    Ricardo

  • Nvidia/MSI 61.77 Drivers

    Hi
    I just downloaded both the Nvidia and MSI 61.77 Drivers, I have the MSI 5900XT VTD 128MB Card, and this card is not even listed in the Readme.txt. How safe is it to use the above mentioned drivers. Currently I'm using the Drivers which came on the CD along with the card i.e 56.xx version. Any help is appreciated.
    Readme.Txt:
    NVIDIA Display Driver for Windows 2000/XP              version 61.77, 07/15/2004
    ================================================================================
    Operating systems supported
    Microsoft Windows XP Home
    Microsoft Windows 2000/XP Professional
    Microsoft Windows 2000 Server
    Adapters supported
    NVIDIA RIVA TNT
    NVIDIA RIVA TNT2
    NVIDIA RIVA TNT2 Pro
    NVIDIA RIVA TNT2 Ultra
    NVIDIA Vanta
    NVIDIA Vanta LT
    NVIDIA RIVA TNT2 Model 64
    NVIDIA RIVA TNT2 Model 64 Pro
    NVIDIA Aladdin TNT2
    NVIDIA GeForce 256
    NVIDIA GeForce DDR
    NVIDIA Quadro
    NVIDIA GeForce2 MX
    NVIDIA GeForce2 MX 200
    NVIDIA GeForce2 MX 400
    NVIDIA Quadro2 MXR
    NVIDIA Quadro2 EX
    NVIDIA GeForce2 GTS
    NVIDIA GeForce2 Pro
    NVIDIA GeForce2 Ti
    NVIDIA GeForce2 Ultra
    NVIDIA GeForce2 Integrated GPU
    NVIDIA Quadro2 Pro
    NVIDIA GeForce4 MX 420
    NVIDIA GeForce4 MX 440
    NVIDIA GeForce4 MX 440-SE
    NVIDIA GeForce4 MX 460
    NVIDIA Quadro NVS
    NVIDIA Quadro4 500 XGL
    NVIDIA Quadro4 550 XGL
    NVIDIA GeForce4 MX Integrated GPU
    NVIDIA GeForce4 MX 420 with AGP8X
    NVIDIA GeForce4 MX 440 with AGP8X
    NVIDIA GeForce4 MX 440SE with AGP8X
    NVIDIA Quadro4 NVS with AGP8X
    NVIDIA Quadro4 380 XGL
    NVIDIA Quadro4 580 XGL
    NVIDIA GeForce3
    NVIDIA GeForce3 Ti 200
    NVIDIA GeForce3 Ti 500
    NVIDIA Quadro DCC
    NVIDIA GeForce4 Ti 4200
    NVIDIA GeForce4 Ti 4400
    NVIDIA GeForce4 Ti 4600
    NVIDIA GeForce4 Ti 4200 with AGP8X
    NVIDIA GeForce4 Ti 4800
    NVIDIA GeForce4 Ti 4800 SE
    NVIDIA Quadro4 700 XGL
    NVIDIA Quadro4 750 XGL
    NVIDIA Quadro4 900 XGL
    NVIDIA Quadro4 780 XGL
    NVIDIA Quadro4 980 XGL
    NVIDIA GeForce FX 5800
    NVIDIA GeForce FX 5800 Ultra
    NVIDIA Quadro FX 1000
    NVIDIA Quadro FX 2000
    Where is my card listed above ???
    Thanks
    Rajiv

    that list doesnt look very up-to-date to me  
    If youve just downloaded them from nvidia then yes they should be safe to use
    Smallbof

  • Missing MSI Clock using 64bit MSI 77.77 drivers

    Hi,
    I'm on a freshly installed copy of XP64bit (AMD).
    Downloaded and installed MSI's 64bit drivers for my MSI NVIDIA 7800GT card and I'm missing the MSI Clock tab with the Dynamic Overclocking bits.
    Any ideas where it went or how to get it back? I don't want to use the coolbits or Nvidia's tuning utils, just the plain old MSI tool.
    I had it pre reinstall, but now, is missing. I get MSI Information but not the tools!
    At my wits end after an hour of googling for an answer.
    Any help greatfully received.
    PS. I've narrowed the components down to SW20.exe & SW24.exe which are both present on the install dir for the x64 drivers.
    PPS. Asus A8N SLI Motherboard
    Regards
    Kieron

    Quote from: Richard on 16-June-06, 22:43:55
    Kieron,
    x64 hardware Driver Support is spotty at best for any hardware out there. You can set your Fan Speeds using the ForceWare Drivers combined with Riva Tuner.
    Take Care,
    Richard
    Ditto

  • MSI GX-700x DRIVERS FOR WIN XP HOME SP3

    MSI GX-700x DRIVERS FOR WIN XP HOME SP3
    PLEASE LINK

    Quote from: herman.design.studio on 27-August-13, 05:37:17
    uz jsem tam kopnul zase win7 64bit profesional na to drivery sou dik
     Use English please.

  • Problems in installing msi k9n6gm-v drivers in sun solaris

    I have problems in installing drivers of my msi motherboard. Please help me. Also im new in using sun solaris. I dont know how to run executable and .ini files format which is windows compatible.

    You are new to the forum, so some advice:
    Do not post the same question to multiple forums.
    Pick one and place it there.
    You will get a response or you will not get a response.
    Cross-posting will not get any answer, any faster, and it is considered bad forum manners.
    ini and exe files are for Microsoft's OS.
    They don't work in *NIX.
    Your motherboard drivers are for Windows and cannot be used for Solaris.
    Here are a few links for you to spend some time with:
    http://www.sun.com/bigadmin/hcl/hcts/device_detect.html
    http://www.sun.com/bigadmin/hcl/
    http://72.5.124.61/software/solaris/howtoguides/installationhowto.jsp
    http://docs.sun.com/app/docs/doc/817-0544/

  • MSI GT735 VGA drivers update (HD3850).

    Hi,
    VGA drivers for the MSI GT735 Ati Mobility Radeon HD3850 are now out of date... 
    The ones available on MSI download site are catalyst 8.5 :
    http://eu.msi.com/index.php?func=nbdriver&maincat_no=135&prod_no=1517&driver_os_no=2#os
    The ones provided by Ati on their offcial site are not working (10.5).   
    Some of the latests games I'm installing are crashing and when I'm asking for support, hotliners ask me to use the latests drivers for my video card, mines are nearly 18 monthes old, which is a long time, especially for drivers, and mostly for video drivers.   
    It seems a little bit strange for a notebook of "Gaming Series"...
    More, modders like Mobility Modder.NET do not work...
    Can you help?   
    Does MSI think about its fans and hardcore gamers?   
    Best regards.

    Sorry!   
    I just downloaded Ati Catalyst 10.5 for Ati Mobility Radeon HD 3850 and they work perfectly!!!   
    They now have a section for notebooks on Ati website.
    My games are now working great, and I'm scoring 3810 in 3DMark 2006, with benchmark by default.
    This post can be removed, I didn't look at "[IMPORTANT!] Modified Vista and XP drivers for laptops with ATI & NVIDIA GPU" section of the forum before posting.
    Best regards.

  • MSI Bluetooth Adapter drivers

    Hello there,
    I've got the MSI Bluetooth USB dongle adapter. I had some trouble to get it working, I have a question regarding the latest 1.3.2.7 drivers.
    After rebooting the WinXP and after logging in, usually the BTTray.exe locks up, about in 3 cases of 10. The WXP has all the latest patches installed. I tried the dongle at other computers, my friends have the same dongle, and they have trouble with WXP as well  :(
    When will be available new drivers working without any trouble?  
    igorage

    I have the Bluetooth module and I can communicate with my laptop using it, but when I try to connect to the Microsoft mouse or keyboard it says that I should plug in the transreciever, so I think that there is some problem with the drivers, because the MSI bluetooth is under USB devices in the Device Manager and the Microsoft Bluetooth transreciever under BlueTooth Radios

  • MSI TI4800SE-VTD8X & Asus P4S8X-X - Does it work?

    This subject is nothing new, but has anyone made this combination work with the capture drivers?  My computer will capture the first time after I install the drivers, but the next time I reboot, the computer either hangs on startup, or the driver just doesn't work (depending on the capture driver I use).
    If someone has made this work, I would appreciate knowing what version of drivers they used, including the motherboard bios and AGP port driver version numbers.
    Aside from this problem and some movies being too dark, the card seems to work ok.
    One other question, has anyone had any luck with MSI Tech support?  I tried to fill out their customer support page, and when I tried to submit it, received the dreaded "Page can not be displayed" and lost everything I had just typed.  I also just called them, talked to someone within  5 minutes, was put on hold for about 15 minutes, and then hung up on.  I tried calling back, but was forced to leave a message.
    Thanks in advance for any help.

    I am using Windows XP Pro. It was a fresh install starting with an empty hard drive.
    As for the video drivers I have been using the Nvidia drivers.  I started with 43.45, but upgraded to 44.03.  Same results with either one.
    I had tried the MSI drivers but they didn't work either.  After each try, I restored my drive to the "clean install state" using Norton Ghost.  I didn't want any old driver remnants to be a problem.

Maybe you are looking for

  • Processo B2B aguardando processamento em background - NFE 3.10

    Boa noite, após implementarmos a versão 3.10 da NFe todos os nossos e-mails de XML para nossos parceiros no GRC ficam aguardando que alguém clique no botão "Continuar processo B2B", só então eles são enviados. Verificando o status do B2B constatei qu

  • Palm Desktop crashes moving a recurring appointment in month view

    In month view in Calendar, Desktop 6.2.2 crashes when attempting to move one ocurrence of a repeating appointment.  Any fixes? Post relates to: Centro (Unlocked GSM)

  • Final Cut - Harddrive problem?

    I was having some issues with FCP earlier today (certain playbacks were funky). I figured that there was some issue with my settings. However, when I returned to the project and tried to start-up of Power MAC G5, the start-up seemed to fail. The moni

  • IDOC to File multiple segments to one record

    Hello, I have an xi scenerio where I am going from IDOC to flat file.   I have an issue where a segment can occur multiple times and I want to take the last segment of that multiple occuring segment as my record to flatfile. for example        EDI_DC

  • Unable to download software for Q10

    I am unable to download the software to my PC for Q10.  On the install Blackberry link it stops and gives me an error no.1920 stating "Service blackberry link communication manager (RIM Tunnel Service) failed to start.  Verify that you have sufficien