MSI to 1109 wont work. deploy issues. what do i do

I have been deploying Adobe Reader 11 and uppdates the easy way. Downloaded AdbeRdr11000_nb_NO.msi from the Adobe FTP server and deployed it with active directory, no issues.
So I have updated this package the "easy way":
1. Downloaded the MSP from the ftp, and used the command "msiexec /a AdbeRdr11000_nb_NO.msi /p ****.msp
2. Renamed the msi file and uploaded it to the server and added it in the Active directory as an update.
This worked great included 11.06, after 11.7 I get the message "acroext.exe" cannot be installed because the file cannot be found in the cabinet file "Data1.cab" . This could indicate a network error, or an error reading from the cd-rom or a problem with the package.
I have tried to update from 11.06 to 07,08 and 09 and same issue.
I see there are other ways to download the exe/zip package and extract files/msi and update adoberdr.msi and deploy in another way, but haven't looked much into that, since the way it was working before was easy and doing the job.
Please help.
It would be much easyer if adobe just could upload .msi's with the updates.@

If the battery was empty then it can take up to 15 minutes of charging before it will respond. If it's been longer than that and it won't switch on then try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Similar Messages

MSI GTX 650 Wont work on my new pc

I just bought an ASUS Desktop, it has the AMD FX-6300 Six-Coure (3.5ghz) processor. 12 Gb of ram, and it came with
AMD Radeon HD 7470 card. I also bought a Diablotek 600watt power supply to with the MSI GTX 650 I bought for it. I swapped power supplies out and graphics cards. I turned the computer on and fans spin, lights light up and everything but no sound or image shows up on the monitor. So I don't know if it is even booting up or not. I swapped the graphics cards out and left the diablotek power supply in and it works just fine. Could someone help me assess this situation on why my MSI graphics card wont work? I don't want to spend $25 for someone to run diagnostics on it.

Quote
And could you further explain the GOP vbios thing?
GOP is a UEFI feature allowing UEFI booting when using Windows8. It requires vga's vbios and board's bios being GOP compliant. Using a vga with a GOP compliant vbios on a board with not GOP compliant UEFI bios results in the machine not posting. Boards without UEFI with just a legacy bios are not affected by this issue and would work with a vga using GOP compliant vbios.
Quote
Now it does say on the system requirements intel core series or higher processor or compatible system. Does that mean it wont work with AMD processors?
No, it's just to compare the required speed level. It will work fine with AMD systems as well.
Quote
And did you mean to try it in another computer when you said try another vga system?
That's what I said:
Quote from: flobelix on 19-July-13, 02:01:46
(...) If possible try vga in another system (...).
Try the graphics card in another computer.

The first row of numbers on my ipod wont work...what maybe the problem?? Help!

the numbers 1,2,&3 wont work on my ipod...im lost!

Try the standard fixes to rule out a sftware problem:
- Reset. Nothng is lost
- Restore from backup
- Restore to factory defaults/new iPod
If yu still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

MSI Clock? Wont work

I wanted to overclock ) my new fx5200 8) since it has a very good cooling system , so I opened the MSI Clock that came with the driver update (4403xp.zip) from the msi.com.tw homepage, I saw that the utility to overclock has three sections; Core Clock--2D and 3D, Memory Clock. The problem is that every time i adjust the clock in core clock 3D it just resets to the original value without prompting :( , so what is the point of over clocking if it doesnt even works? X( , the 2D and the memory clocks are adjusted right and taken over automatically , I just complain about the fact of not being capable of changing the clock on 3D core because it is the most important value for overclocking , so please tell me how to change this value, when I reset my computer it just resets the 3D core value to 250mhz ;( , and actually when I set it to a high number like 1000mhz it just don’t shows any artifacts with the artifact tester 5, so it seems that the values (the 3d core) are not being changed by the MSI Clock ;(
Post, Data: actually the 3D!Turbo Experience utility is very poor, because the Temperature is not true and neither does the rpm of the fan :O , and it does not provide a good overclocking range .
Sincerely
Diego, Deus I MSI

I try using MSI drivers and tools also when I first get cards from them too but I often find that they aren't as good as what I can find out on the web i.e. nVidia drivers and developer tools...
MSI is just now taking steps to provide OCing tools and they're just not seasoned at it yet is my guess...so I'm just trying to give you alternatives in the meantime until they polish their technique.
I have used MSI's OCing tool with my FX5900 VTD128 card that I just got and didn't have any problem like you describe. I adjusted it using the Auto Detect and then hit the Test Setting button and it stuck for me even after I rebooted. Are you sure that you're using it properly?
And it's not Bonzi it's Bonz thank you :D
Bonz 8)

Please Help :) MSI NX8800gt Card Wont work on MS-7255

I have the MS-7255 board and the MSI 512mb NX8800GT card with 700w power supply and 1 gig of ram but the PC wont boot up.
Not even the BIOS screen will display, the fan on the CPU and PCIE card just keep spinning.
When I insert my old radeon x1650 card the pc boots perfectly. I have tried the live update feature but when the tests complete i get a runtime error (empty object) and the update is not done.
Main steps taken :
Removed old radeon drivers, insert new MSI card, add 700w psu which works fine when radeon card is installed
Seat Card properly
Insert Additional 6 pin PCIE connector
Turn on PC
Bios screen doesn't show or any of the usual warning beeps, fan just keeps spinning
Ive never flashed a bios before and I dont have a floppy drive or usb key
I'm sure its down to an out of date motherboard but the live update will not work for me on IE 6 or 7, can you help in any way?
Ive bought a new card and a new psu I cant get it to run

I also connected the additional power supply to the card, but when I start the machine the fans on the CPU and on the Graphics card just keep on spinning and the bios doesnt appear nor do any sounds beep, unlike when I use the old radeon card when you get 1 beep and then the bios....
As best as I can make out, the BIOS and the VGA bios are out of date but I cant use live update
PSU DETAILS :
Silent Storm 700W quad 12v PSU
4 +12V rails, 18A each
Link to the Product Specification
http://www.xtremecomputing.co.uk/review.php?id=321

Web services wont work no matter what i do

got a new laserjet MFP M127FW and everything thus far works except eprint.
IF i can get it to enable, it only does so after i reboot (power cycle) the printer.
if i try and enable it via the web management it will never say it was enabled, it just clocks (spinning icon that says connecting)
then SOMETIMES the web interface will say its enabled and SOMETIMES i can see the randomly generated email it gives me, BUT it only lasts for about 5 minutes then Web Services disables itself again.
i have forwarded everyport listed in this forum and the how to created by someone here.
I have even put the printer in the DMZ - still doesnt work.
N-O-T-H-I-N-G is making Web services work... period.
I have flashed the firmware to the latest (did that right out of the box)
there is nothing left for me, as the user to do... eprint/web services is broken. period.
i saw someone state that the code that is supposed to print is the name in the randomly generated email you are given.
and i tried to use that to register the unit on hpconnect but it just says "unexpected error"
also when i try to do things from the lcd screen, such as print information sheet, enable/disable web services, view email, it just clocks (never ending spinning icon.. i left it like that overnight and it never stopped.
IF i am fast enough and see the randomly generated email in the Web GUI, and then try to use the LCD to print the code, or do anything aside from via email, (which it does display if the web gui shows it) it says the services are unavailable
once again, i have spent the last 2 days, totalling over 10 hours trying to make this work and IF it is enabled, i think it is just a false positive, even though the random email does display it doesnt work and then within 5 minutes, web services disables itself again.
I am not some average user, i am a 20yr veteran of PC/MAC/Networking, and i have never seen a printer do this that wasnt flat out broken.
but since this is the only thing not working, thus far, i believe it to simply be a firmware issue.
lastly.... when trying to enable the web services the NIC lights on the back of the printer are blinking 100% nonstop, forever and ever.. until i power cycle it.
its as if the web services is locked up or stuck in a loop.
also restore defaults from the LCD or web GUI doesnt do anything... nothing is changed... and i am never presented with the initial startup like one would expect.
is there a way to force the printer to an out of the box state where it flushes anything and everything back to a factory state? (where i have to go through the initial setup again ?
p.s.
network settings are fine, i can print to the printer from ipads, iphone, pc's and 2 MAC's.. so everything on the network side works... just not Web services
This question was solved.
View Solution.

I was able to talk to a fantastic tech in cloud services who remembered a nun documented fix
USE THE LEVEL 3 DNS SERVERS!!! No other DNS servers will work
This literally within 10 seconds made HP Web Services work!!!!
209.244.0.3
209.244.0.4
I Switched my entire network to this
Huge kudos to cloud services!!!

IMessage wont work no matter what I try. HELP!!

Hi. I recently got a new iphone 5s as an upgrade from my old 4s. I cant get my iMessage to turn or facetime to work. I have tried resetting network settings and also using apple id for facetime and imessage but the same message pops up "An error occurred during activation. Try again." I have also contacted my network provider (Vodaphone) but they are still not able to help me and say that this is a fault at apples end....??. Can anybody help me with this issue? Many thanks.

There are many threads on this forum by people with the same issue. If you look over here on the right ---> at the "More like this" box, you can find them and possibly see some solutions that have worked for others. Best of luck to you.

My ipod touch 5g home button wont work no matter what i try!

Ive tried everything apple said to do and all the concepts, like rubbing alcohol! im not sure what to do. Please help!

Try:
http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it at an Apple store by making an appointment:
Apple Retail Store - Genius Bar
or send it in to Apple. See:
Service Answer Center - iPod
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

I just bought my iphone 4 a few weeks ago from a friend, they used it for like a month, and now my lock button/ power off button wont work at all. what do i do?

I just bought my iphone 4 a few weeks ago from a friend and now the lock button/power button is unresponsive. It worked fine when i bought it, and i havent dropped the phone or gotten it wet at all! what do i do?

You can try Restoring it in iTunes but I have a feeling the switch is broken and you will have to get it serviced.

MSI Neo2 Plat wont work!

Hey guys, recently bought all new parts for a computer:
MSI Neo2 Platinum Socket 939 Mobo
AMD 3500+ 939 not proccess .013 micron i think?
WD 160GB 8mb SATA HD
Leadtek Gforce 6800GT 256mb AGP8x
Corsair XMS Extreme 1gb (512 x 2)
ok so I put all the things together and try to start the computer. At the first screen where it shows the VGA bios info its all in symbols and in different colors and I cant read anything and when it goes to the MSI Neo2 Platinum Edition Screen I cant see it well either. It then goes onto Verifying DMI Pool Data... and hangs there. All 4 leds are on, for the D bracket thing. Everything is in symbols and I cannot read anything nor enter bios. HELP PLZ!
PS. Turns out I can enter bios but there are black square spots all over the place preventing me from actively reading the bios settings and such.

Sounds like a faulty video card to me.
Try using a spare video card for testing.
But don't test with one that is too old. I believe this mobo only suports video cards that use the 1.5V standard. Usually any AGP 4X or better will do.

HT4623 I plugged my iphone into my computer and it said it cannot connect to itunes because it needed the 10.6.3. i went to the itunes website and tried to download it but it wont work and still says it will not connect to my iphone.

A message pops up on my computer telling me that I cannot connect my iphone because itunes needs to be updated and i have tried everything i can think of to update it but it still wont work

What version of Itunes do you have? Can you be a little more clear on what - Still wont work means? What happens when you connect the phone? What doesnt happen etc...
Try:
1) Unplug phone from computer.
2) update to itunes 10.7
3) reconnect phone to computer

My itunes wont work after update

my itunes wont work after update. whats the problem.

also, the curser just goes round and round. cant close by clicking x, have to close frome the place that says close. then message says program not responding.

I can't install any app because my install button wont work pls help

I can't install any app because my install button wont work pls help, what shall I do?

- What do you mean it does not work? Could it be that the app ere not compatible with your model iPod and its iOS?
- Try going to Settings>Store and sign out and sign back in.

When I try to login to icloud I get a message that says my appleid is valid but it wont work for icloud. What do I do?

when I try to login to icloud I get a message that says my appleid is valid but it wont work for icloud. What do I do?

Hi ljzimprich!
To have a better understanding of your issue, please let everyone know which model printer you own and what operating system you are connecting it to. That way, community will be able to assist you with suggestions appropriate for your product.
Thanks!

Adobe Flash Player wont work after all steps taken, what haven't I done to make it work?

I tried to play a game I love & I got this message: "To view this page ensure that Adobe Flash Player version 10.0.0 or greater is installed" So I went to your site to update my flash player & hit the "Test Flash Player" button & it came up
like this^^. I went to the suggestions your site provided & went to Manage add-ons to look for Shockwave Flash Object to enable it:
You can see that it is enabled by this picture I have provided. So it also asks me to make sure that ActiveX isn't clicked on & so I did:
As you can see it's turned off & I even tried it the other way where it has the spot checked & it still wont play. So I decided to see if I could reinstall it onto my computer & so in turn I got this message:
That is the message I got even after trying to delete Flash Player & reinstalling it. Now you can see my frustration with all this. Adobe Flash Player wont work after all steps taken, what haven't I done to make it work? I have a Windows 8.1 Pro, I use Internet Explorer which has the latest version on it, which is Windows Explorer 11 Version: 11.0.9600.17498 & I was also under the understanding that I also had the latest version of Adobe Flash Player on this computer as well. Can someone tell me what to do??

First, confirm that ActiveX Filtering is configured to allow Flash content:
https://forums.adobe.com/thread/867968
Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
You can try to work around these issues by using Compatibility View:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
If that is too inconvenient, using Google Chrome may be a preferable alternative.

MSI to 1109 wont work. deploy issues. what do i do

Similar Messages

Maybe you are looking for