MSI transform file does not seem to be preventing updates
So I have noticed that in the last few versions, the MSI transform file (MST) that i have been using does not seem to be working in terms of stopping the update nag on the users machines.
My transform file has the following entries:
4. under property, change the ISCHECKFORPRODUCTUPDATES to 0 and the AgreeToLicense to Yes
5. Under Checkbox, also change ISCHECKFORPRODUCTUPDATES to 0
Has there been a new key added or something? Becuase my users are still getting prompted, even with these changes.
I think it was previous versions of flash which had been installed outside of the gpo that was causing it. The problem has dissapeared somewhat, or well I havent noticed it on the last few flash updates. I would make sure that the version of flash on the machine is the one installed via GPO. It could be that the user or an administrator had installed a non GPO/MST version of it, which was I think the case with us.
I attached both my transforms for acrivex and plugin for version 11.5.502.110, but it should be similar. I have not noticed the popup in a while so i think i got rid of the problematic flash copies on the machines due to reimaging or uninstalling old flash on a case by case basis. sorry to say!
Oh i cant upload files, oh well. its just 3 properties:
But if anyone else has the problem and knows a solution, feel free to update! there could be another property in there somewhere, however like i said I have not seen the behaviour reoccur, especially on newly imaged machines.
Similar Messages
-
Hi. I just wanted to update my 3 apps PS, Brigde and Indesign. After doing that I wasn't abble to open Brigde??? PS and Indesign works fine. Further more the Application Manager does not seem to register the updates I have made on Indesign and PS. Everytime I open the computer MacIBook 4.1, OS 10.6.7) it looks like I haven't updated software? Please help! Kurt
Moving this discussion to the Bridge General Discussion forum.
Kurt Rodahl Hoppe I would recommend reviewing Updates repeatedly applied | CC which discusses how to apply the updates successfully. -
Lightshop 4.3 update **I have 4.2 installed and downloaded the 4.3 version when notified there was an update. Now I have extracted the files and started the installer. However, it does not appear to recognize the original 4.2 install, listing this as an update, So, do I need to delete the 4.2 version first, or just install 4.3 in the same folder right over the 4.2 install? I don't want to break anything by overwriting the original install.
The choice is yours. The Lightroom 4.3 is the complete install so you can either remove the software or install with the current installation in place.
-
Tnsnames.ora file does not seem to load in SQL Developer
I've really tried my best to figure this out on my own ... through the Help, this forum, and Internet in general. I apoligize in advance for having to ask this, since I'm sure this is a common issue. This particular form entry was really close:
Database Connections will not load tnsnames.ora
But, I just can seem to figure out why, or where entries from my tnsnames.ora file are loading into SQL Developer.
- I have the TNS_ADMIN system environment variable defined to the directory where tnsnames.ora is stored - C:\oracle\product\10.2.0\client_1\NETWORK\ADMIN.
- I do not see a TNS tab as the forum entry above indicates anywhere in SQL Developer - This may be my problem.
It seems that this issue could be cleared up with better directions on how to import tnsnames.ora entries into SQL Developer. Is there any specific direction on how to get your tnsnames.ora file setup correctly with SQL Developer running on Windows XP - Besides the Help which mentions the setup of TNS_ADMIN, but doesn't really tell you what the expected result is, or where the entries will be, or how to verify this is working?
Any help would be most appreciated.
Thanks,
Dave
Below is the export from the About box in SQL Developer:
About
Oracle SQL Developer 1.5.1
Version 1.5.1
Build MAIN-5440
Copyright © 2005,2008 Oracle. All Rights Reserved.
IDE Version: 11.1.1.0.22.49.42
Product ID: oracle.sqldeveloper
Product Version: 11.1.1.54.40
Version
Component Version
========= =======
CVS Version Internal to Oracle SQL Developer (client-only)
Java(TM) Platform 1.6.0_07
Oracle IDE 1.5.1.54.40
Versioning Support 1.5.1.54.40
Properties
Name Value
==== =====
apple.laf.useScreenMenuBar true
awt.toolkit sun.awt.windows.WToolkit
class.load.environment oracle.ide.boot.IdeClassLoadEnvironment
class.load.log.level CONFIG
class.transfer delegate
com.apple.macos.smallTabs true
com.apple.mrj.application.apple.menu.about.name "SQL_Developer"
com.apple.mrj.application.growbox.intrudes false
file.encoding Cp1252
file.encoding.pkg sun.io
file.separator \
http.agent Mozilla/5.0 (Java 1.6.0_07; Windows XP 5.1 x86; en_US) ICEbrowser/v6_1_3
ice.browser.forcegc false
ice.pilots.html4.ignoreNonGenericFonts true
ice.pilots.html4.tileOptThreshold 0
ide.AssertTracingDisabled true
ide.bootstrap.start 1628689279134099
ide.build MAIN-5440
ide.conf C:\sqldeveloper\sqldeveloper\bin\sqldeveloper.conf
ide.config_pathname C:\sqldeveloper\sqldeveloper\bin\sqldeveloper.conf
ide.debugbuild false
ide.devbuild false
ide.extension.search.path sqldeveloper/extensions:jdev/extensions:ide/extensions
ide.firstrun true
ide.java.minversion 1.5.0
ide.launcherProcessId 5580
ide.main.class oracle.ide.boot.IdeLauncher
ide.patches.dir ide/lib/patches
ide.pref.dir C:\Documents and Settings\X626730\Application Data\SQL Developer
ide.pref.dir.base C:\Documents and Settings\X626730\Application Data
ide.product oracle.sqldeveloper
ide.shell.enableFileTypeAssociation C:\sqldeveloper\sqldeveloper.exe
ide.splash.screen splash.gif
ide.startingArg0 C:\sqldeveloper\sqldeveloper.exe
ide.startingcwd C:\sqldeveloper\sqldeveloper\bin
ide.user.dir C:\Documents and Settings\X626730\Application Data\SQL Developer
ide.user.dir.var IDE_USER_DIR
ide.work.dir C:\Documents and Settings\X626730\My Documents\SQL Developer
ide.work.dir.base C:\Documents and Settings\X626730\My Documents
java.awt.graphicsenv sun.awt.Win32GraphicsEnvironment
java.awt.printerjob sun.awt.windows.WPrinterJob
java.class.path ..\..\ide\lib\ide-boot.jar
java.class.version 50.0
java.endorsed.dirs C:\Program Files\Java\jdk1.6.0_07\jre\lib\endorsed
java.ext.dirs C:\Program Files\Java\jdk1.6.0_07\jre\lib\ext;C:\WINDOWS\Sun\Java\lib\ext
java.home C:\Program Files\Java\jdk1.6.0_07\jre
java.io.tmpdir C:\DOCUME~1\X626730\LOCALS~1\Temp\
java.library.path C:\sqldeveloper;.;C:\WINDOWS\Sun\Java\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\PROGRA~1\IBM\WEBSPH~2\BIN\DB2;C:\PROGRA~1\IBM\WEBSPH~2\BIN\MQClient;C:\PROGRA~1\IBM\WEBSPH~2\BIN;C:\IBM\WebSphere MQ Client\Java\lib;C:\Program Files\CA\SharedComponents\PEC\bin;C:\oracle\product\10.2.0\client_1\bin;C:\oracle\ora92\bin;C:\oracle\product\10.2.0\client_2\bin;C:\Perl\bin\;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\Program Files\CA\PEC\bin;C:\Reuters\Plus;C:\Reuters\Plus\COMLOGIN;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Compuware\Common;C:\Program Files\Common Files\Compuware;C:\Program Files\CA\AllFusion Harvest Change Manager;C:\Program Files\SecureCRT\;C:\PROGRA~1\F-Secure\Ssh;c:\Program Files\Microsoft SQL Server\90\Tools\binn\;c:\Program files\1E\SMSNomad\;C:\j2sdk1.4.2_06\jre\bin;C:\Program Files\IDM Computer Solutions\UltraEdit-32;C:\Program Files\IBM\Installation Manager\eclipse\lib;C:\Program Files\CA\Cryptography\;C:\Program Files\CA\R71\AllFusion Harvest Change Manager;C:\IBM\WebSphere MQ Client\bin;C:\IBM\WebSphere MQ Client\tools\c\samples\bin;C:\PROGRA~1\IBM\SQLLIB\BIN;C:\PROGRA~1\IBM\SQLLIB\FUNCTION;C:\PROGRA~1\IBM\SQLLIB\SAMPLES\REPL
java.naming.factory.initial oracle.javatools.jndi.LocalInitialContextFactory
java.runtime.name Java(TM) SE Runtime Environment
java.runtime.version 1.6.0_07-b06
java.specification.name Java Platform API Specification
java.specification.vendor Sun Microsystems Inc.
java.specification.version 1.6
java.util.logging.config.file logging.conf
java.vendor Sun Microsystems Inc.
java.vendor.url http://java.sun.com/
java.vendor.url.bug http://java.sun.com/cgi-bin/bugreport.cgi
java.version 1.6.0_07
java.vm.info mixed mode
java.vm.name Java HotSpot(TM) Client VM
java.vm.specification.name Java Virtual Machine Specification
java.vm.specification.vendor Sun Microsystems Inc.
java.vm.specification.version 1.0
java.vm.vendor Sun Microsystems Inc.
java.vm.version 10.0-b23
jdbc.driver.home /C:/oracle/product/10.2.0/client_1/
jdbc.library /C:/oracle/product/10.2.0/client_1/jdbc/lib/ojdbc14.jar
line.separator \r\n
oracle.home C:\sqldeveloper
oracle.ide.util.AddinPolicyUtils.OVERRIDE_FLAG true
oracle.translated.locales de,es,fr,it,ja,ko,pt_BR,zh_CN,zh_TW
oracle.xdkjava.compatibility.version 9.0.4
orai18n.library /C:/oracle/product/10.2.0/client_1/jlib/orai18n.jar
os.arch x86
os.name Windows XP
os.version 5.1
path.separator ;
reserved_filenames con,aux,prn,lpt1,lpt2,lpt3,lpt4,lpt5,lpt6,lpt7,lpt8,lpt9,com1,com2,com3,com4,com5,com6,com7,com8,com9,conin$,conout,conout$
sun.arch.data.model 32
sun.boot.class.path C:\Program Files\Java\jdk1.6.0_07\jre\lib\resources.jar;C:\Program Files\Java\jdk1.6.0_07\jre\lib\rt.jar;C:\Program Files\Java\jdk1.6.0_07\jre\lib\sunrsasign.jar;C:\Program Files\Java\jdk1.6.0_07\jre\lib\jsse.jar;C:\Program Files\Java\jdk1.6.0_07\jre\lib\jce.jar;C:\Program Files\Java\jdk1.6.0_07\jre\lib\charsets.jar;C:\Program Files\Java\jdk1.6.0_07\jre\classes
sun.boot.library.path C:\Program Files\Java\jdk1.6.0_07\jre\bin
sun.cpu.endian little
sun.cpu.isalist
sun.desktop windows
sun.io.unicode.encoding UnicodeLittle
sun.java2d.ddoffscreen false
sun.jnu.encoding Cp1252
sun.management.compiler HotSpot Client Compiler
sun.os.patch.level Service Pack 2
user.country US
user.dir C:\sqldeveloper\sqldeveloper\bin
user.home C:\Documents and Settings\X626730
user.language en
user.name a641421
user.timezone America/New_York
user.variant
windows.shell.font.languages
Extensions
Name Identifier Version Status
==== ========== ======= ======
Check For Updates oracle.ide.webupdate 11.1.1.0.22.49.42 Loaded
Code Editor oracle.ide.ceditor 11.1.1.0.22.49.42 Loaded
Database Connection Support oracle.jdeveloper.db.connection 11.1.1.0.22.49.42 Loaded
Database Object Explorers oracle.ide.db.explorer 11.1.1.0.22.49.42 Loaded
Database UI oracle.ide.db 11.1.1.0.22.49.42 Loaded
Diff/Merge oracle.ide.diffmerge 11.1.1.0.22.49.42 Loaded
Extended IDE Platform oracle.javacore 11.1.1.0.22.49.42 Loaded
External Tools oracle.ide.externaltools 11.1.1.0.22.49.42 Loaded
Feedback oracle.ide.feedback 11.1.1.0.22.49.42 Loaded
File Support oracle.ide.files 11.1.1.0.22.49.42 Loaded
File System Navigator oracle.sqldeveloper.filenavigator 11.1.1.54.40 Loaded
Help System oracle.ide.help 11.1.1.0.22.49.42 Loaded
History Support oracle.jdeveloper.history 11.1.1.0.22.49.42 Loaded
Import/Export Support oracle.ide.importexport 11.1.1.0.22.49.42 Loaded
Log Window oracle.ide.log 11.1.1.0.22.49.42 Loaded
Mac OS X Adapter oracle.ideimpl.apple 11.1.1.0.22.49.42 Loaded
Navigator oracle.ide.navigator 11.1.1.0.22.49.42 Loaded
Object Gallery oracle.ide.gallery 11.1.1.0.22.49.42 Loaded
Object Viewer oracle.sqldeveloper.oviewer 11.1.1.54.40 Loaded
Oracle IDE oracle.ide 11.1.1.0.22.49.42 Loaded
Oracle Microsoft Access Browser oracle.sqldeveloper.thirdparty.access 11.1.1.54.40 Loaded
Oracle Migration Workbench oracle.sqldeveloper.migration 11.1.1.54.40 Loaded
Oracle Migration Workbench - MS Access oracle.sqldeveloper.migration.msaccess 11.1.1.54.40 Loaded
Oracle Migration Workbench - MySQL oracle.sqldeveloper.migration.mysql5 11.1.1.54.40 Loaded
Oracle Migration Workbench - SQLServer oracle.sqldeveloper.migration.sqlserver2005 11.1.1.54.40 Loaded
Oracle Migration Workbench - Translation Core oracle.sqldeveloper.migration.translation.core 11.1.1.54.40 Loaded
Oracle Migration Workbench - Translation MS Access oracle.sqldeveloper.migration.translation.msaccess 11.1.1.54.40 Loaded
Oracle Migration Workbench - Translation MS SQL Server oracle.sqldeveloper.migration.translation.sqlserver 11.1.1.54.40 Loaded
Oracle Migration Workbench - Translation MySQL oracle.sqldeveloper.migration.translation.mysql 11.1.1.54.40 Loaded
Oracle Migration Workbench - Translation Sybase oracle.sqldeveloper.migration.translation.sybase 11.1.1.54.40 Loaded
Oracle Migration Workbench - Translation UI oracle.sqldeveloper.migration.translation.gui 11.1.1.54.40 Loaded
Oracle MySQL Browser oracle.sqldeveloper.thirdparty.mysql 11.1.1.54.40 Loaded
Oracle SQL Developer oracle.sqldeveloper 11.1.1.54.40 Loaded
Oracle SQL Developer Extras oracle.sqldeveloper.extras 11.1.1.54.40 Loaded
Oracle SQL Developer Reports oracle.sqldeveloper.report 11.1.1.54.40 Loaded
Oracle SQL Developer SearchBar oracle.sqldeveloper.searchbar 11.1.1.54.40 Loaded
Oracle SQL Developer TimesTen oracle.sqldeveloper.timesten 1.5.1.1.2 Loaded
Oracle SQL Server Browser oracle.sqldeveloper.thirdparty.sqlserver 11.1.1.54.40 Loaded
Oracle Sybase Browser oracle.sqldeveloper.thirdparty.sybase 1.2.1.54.40 Loaded
Oracle XML Schema Support oracle.sqldeveloper.xmlschema 11.1.1.54.40 Loaded
PROBE Debugger oracle.jdeveloper.db.debug.probe 11.1.1.0.22.49.42 Loaded
Peek oracle.ide.peek 1.0 Loaded
Replace With oracle.ide.replace 11.1.1.0.22.49.42 Loaded
Runner oracle.ide.runner 11.1.1.0.22.49.42 Loaded
SQL Worksheet Window oracle.sqldeveloper.sqlworksheet 11.1.1.54.40 Loaded
Search Bar oracle.ide.searchbar 11.1.1.0.0 Loaded
Snippet Window oracle.sqldeveloper.snippet 11.1.1.54.40 Loaded
Sybase 12 oracle.sqldeveloper.migration.sybase12 11.1.1.54.40 Loaded
Sybase 15 oracle.sqldeveloper.migration.sybase15 11.1.1.54.40 Loaded
Tuning oracle.sqldeveloper.tuning 11.1.1.54.40 Loaded
VHV oracle.ide.vhv 11.1.1.0.22.49.42 Loaded
Versioning Support oracle.jdeveloper.vcs 11.1.1.0.22.49.42 Loaded
Versioning Support for CVS oracle.jdeveloper.cvs 11.1.1.0.22.49.42 Loaded
Versioning Support for Subversion oracle.jdeveloper.subversion 11.1.1.0.22.49.42 Loaded
Web Browser and Proxy oracle.ide.webbrowser 11.1.1.0.22.49.42 Loaded
oracle.ide.dependency oracle.ide.dependency 11.1.1.0.22.49.42 Loaded
oracle.ide.indexing oracle.ide.indexing 11.1.1.0.22.49.42 LoadedUsing Windows XP/Vista...
After testing in our environment, it appears that SQL Developer 1.5.1 (5440) does in fact ignore the TNS_ADMIN environment variable and ONLY looks in the Oracle Home directory (network/admin). We define a central network location for our tnsnames file and have the tns_admin setup to point there instead of locally for our users.
When selecting to add a new connection (in 1.5.1, it works in previously releases... meaning 1.2.something) and selecting TNS, the drop-down remains empty. However, if I exit SQL Developer and then copy the tnsnames file to the local network/admin directory I can then re-launch SQL Developer and the drop-down is populated. Exiting SQL Developer again, deleting the local copy of tnsnames, and then launching SQL Developer yet again results in the drop-down being empty.
All other Oracle-related applications function as expected (as they have for years) using the TNS_ADMIN environment variable.
Any suggestions/ideas? -
The "reverse position" function for midi in the transform window does not seem to be working.
So I'm trying to have all of the notes of my midi region play in reverse order. I found out after some research that the way to do this is via the "reverse position" function in the transform window. I opened the parameters for this and it gave me an option to select "inside" a set of measure positions, so I set it to between measure 99 (99 1 1 1) and measure 172 (172 1 1 1) and tried to "select and operate." Nothing. Tried to select manually and then hit "operate." Nothing. I then changed the condition from "inside" to "all" and manually select, then hit "operate," and this time it showed "340 events in one midi region found" at the bottom of the window but still did nothing. I haven't manually counted the notes in the region but that seems like a fair estimate that it's the right number of notes (midi events).
Any idea why this function seems to do absolutely nothing?((/MAIN/NODE1NODE2 = 'x') EX)
This means that the condition will eval to true or false ONLY if the node exists?
(Note: In the actual scenario, I have an IDOC and I wish to perform a similar check on a tag that may or may not exist depending
upon the situation).
If your requirement is to check if a node exists or not then below is the condition which you should be using:
Left Operand: /MAIN/NODE1/NODE2
Middle Operand: EX
NO right operand in this case
Regards,
Abhishek. -
Need to know how to update my iPad 1 to iOS 6.0 or better? I have iOS 5.1.1 and the device shows not updates available as this is supposed to be the latest update.??????
sparker2512 wrote:
Need to know how to update my iPad 1 to iOS 6.0 or better? I have iOS 5.1.1 ...
The iPad 1 can only update as far as iOS 5.1.1 -
I have a Mac Book Pro with 10.6.8 and want to back up my files using a flash drive. It says I did it but when I tried to check on my other Mac - an I Mac with 10.5.8, thedata does not seem to be there. I cant see photos, etc.. It shows the backup as a file and shows various system info. but there are no photos or other files shown.
Thanks for any advise.
MikeA PowerPC Mac, if that's what it is, won't be able to see an Intel Mac's formatted data. Also ExFat formatting is not supported by 10.6.3 or earlier. I would try viewing the backup on another Intel Mac with at least 10.6.4. If it isn't there, then the backup never really took place. I much profer a hard drive with Carbon Copy Cloner.
-
My mac is becoming too slow. It takes long to open word documents, pdf files or excel documents or even safari. Can anybody suggest something? I have tried to reduce the number of open applications, but does not seem to work.
Hi ...
Checked to see how much free space there is on the startup disk lately?
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure there's a minimum of 15% free disk space.
Freeing Up Hard Disk Space - Mac GuidesFreeing Up Hard Disk Space - Mac Guides
If disk space is not the issue, booting in Safe Mode deletes system caches that may help.
A Safe Mode boot takes longer then a normal boot so be patient.
Once you see the Desktop, click the Apple menu icon top left corner of the screen.
From the drop down menu click Restart.
See if that makes a difference ... -
With Windows 7 I upgraded itunes to 11. Now in my itunes library, when I click on a song "original file could not be found" comes up. This happens with over 2000 songs, but it seems to be ones I recorded from cd's. Locate does not seem to work. Has anyone else had this problem?
Highlight a song that is supposedly missing, press CTRL+I to Get Info, say no when asked to locate the file, then look at the summary tab. Where does iTunes "think" the file should be? Where is it really? You may need to give a configuration file a minor tweak.
tt2 -
HELP! Serious problem: Time Machine does note seem to back up newer files
I have a serious Time Machine issue. I noticed that after the initial backup of about 110gb, it seems to stopped backing up recently added files. Like for example, I downloaded a file into my Desktop at 6 hours ago and the file is still there right now but when I go to Time Machine, the file is not in any previous hourly back ups even though some if them were taken after I added the files.
I also tried ripping a DVD and placed the file into my Movies folder, but the same thing happen. I tried "Back Up Now" to see if the files will be added, but the 700mb file does not get copied. I watched the system preferences and it only copied 5mb of file. Why is this happening?
Also, my when I first started Time Machine backups a few hours ago, my Documents folder has 34 files in it. It now has 48 files with files being added regualrly during the next few hours but when I looked at ALL the hourly backups, they are still showing that I have 34 files!!!
Please help. I have a 500gb External Hard drive that I formatted using GUID partition scheme. It does have a SuperDuper ackup of it of my Tiger. Do I have to reformat the drive and have Time Machine start on a completely new drive?
Thansk a lot!I have been having the same problem for some time now and only noticed it when I tried to recover a file only to find it had not been backed up. Brief details
* The initial backup (apprx 105GB) completes ok - I have checked this
* Subsequent new files are not added to the backup. I have checked this both via the Time Machine application and manually searching through the backup drive. I have also tried this with different types of files; mp4, xls, doc, text, email messages in mail etc. none get backed up. I have also tried amending an existing file but the amended file is not backed up
* Nevertheless the console log shows that the hourly back ups are being completed with no apparent problems
* I do not have any exclusions selected in Time Machine preferences
* I have not been able to replicate this consistently but occasionally after a reboot I get this console log message
12/26/07 8:23:36 PM /System/Library/CoreServices/backupd693 Event store UUIDs don't match for volume Macintosh HD II
12/26/07 8:23:37 PM /System/Library/CoreServices/backupd693 Node requires deep traversal:/ reason:kFSEDBEventFlagMustScanSubDirs|kFSEDBEventFlagReasonEventDBUntrustable|
HD II is my backup drive. Time Machine then appears to start a more extensive backup. I do not think it is a full backup as it takes no more than 10minutes. Once this finishes the backup then looks accurate with all files present. However the error then re-occurs and no new files are added to the backup
* I have spoken to Apple Care but no idea
* I have tried all of the following in no particular order; repair permissions; reformat the backup drive; delete .plist file; reset NVRAM; alternative drive; force a rebuild of the spotlight database; my host name does not include any odd characters etc etc
All very tedious...any insight greatly appreciated -
In large PDF files the cursor moves at warp speed with a mind of it's own, I've tried slowing it down in Sys Pref with no luck. On small files cursor action is normal. This happens in Safari, Preview and other programs that use PDF files. Sorry to say this does not seem to be a new problem with 7.# I've had it with prvevious versions of operating system Right now I'm using a Apple wireless mouse and key board. Using the USB keyboard and mouse the same problem does not go away.
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2. -
Configure XQuery Transformation dialog does not show mfl file
I have created a valid mfl file. I would like to use this file as an input type.
I have copied the file into the schema directory, however the Configure XQuery
Transformation dialog does not show the file.
All help highly appreciated.
Regards
DoshiHi ..
Might be corrupted Finder preferences.
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Preferences/com.apple.finder.plist
Click Go then move the com.apple.finder.plist file to the Trash.
Restart your Mac. -
Imovie (and idvd) does not seem to read my mpeg files ?
imovie and idvd does not seem to read my collection of mpeg movies. Do they need to be converted to some other format ?
Welcome to the Discussion Forums.
Mpeg1 and 2 files will need converting (Mpegstreamclip can do this - QT mpeg2 playback component required for mpeg2)
Mpeg 4 files will generally be OK but some may need converting. -
We have several users using OLS V4.2 on one of our citrix servers. However, one of our users can upload an excel sheet into OLS. She always gets the error :
Package Result = Error]
Package: Import excel V2
Appset: Blagden
Application: SALES
Request Time: 2009-04-14 16:56:18
Start Time: 2009-04-14 16:56:18
End Time: 2009-04-14 16:56:18
Total Time: 00:00:00
TOTAL STEPS 8
1. Assign initial parameters: completed in 0 sec.
2. Create Temp Table: completed in 0 sec.
3. Transform Data Task1: completed in 0 sec.
4. update: completed in 0 sec.
5. update rejected: completed in 0 sec.
6. Transform Data Task2: completed in 0 sec.
7. Convert data: completed in 0 sec.
8. Load and process: Failed in 0 sec.
[Selection]
XLFILE= DATAMANAGER\DATAFILES\FL_sales reporting outlooksoft_FL1_FL3_A2009_03.xls
SHEET=TOTAL
TRANSFORMATION= DATAMANGER\TRANSFORMATIONFILES\my Files\import historical data.xls
CLEARDATA= No
RUNLOGIC= Yes
[Messages]
[ The load file does not exist ]
I deleted the user from the userlist and reprocessed security. I added the user again in the admin group and reporcessed user security. Same error.
When the user logs on on citrix using her profile and starts Webexcel using my profile - no problem.
My profile has administrator rights and she may not have them. So I really want her into the usergroup.
We renamed the file to upload to a file with 8 characters - same problem.
Anyone any experience with this error and how to solve it ?
Thanks for your reply.
JohanHello,
From what I understand from your log file, this is a custom import package. It is failing into the last step, loading data into the cube and it seems there is no file to be loaded. If the same package is working well for the other users, this means that the user has not enough security rights to load data from that file (maybe the file contains data for which the user is not authorized to see).
To understand better what is happening, just try to activate the debug using the DEBUG(ON) instruction into EvModifyPackage. This will create more information regarding the parameters passed to your tasks and you will be able to identify the file name passed to Dump&Load task.
You can verify then into Private publication\user name\Temp files the content of file (and the content of all temporary files generated by your package) and this will help you to understand where is the problem.
Hope this can help you,
Mihaela -
@-moz-keyframes does not seem to work in cs 5.5
I have difficulties when editing a CSS style in CS5.5.
Dreamweaver accepts
@-webkit-keyframes [id]...
and @keyframes [id]...
without any problems.
Only when I try do use
@-moz-keyframes [id]...
the editor does not seem to accept the term.
Usually the color of the code turns dark red but it doesn't with mozilla keyframes.
Also the file doesn't work neither on a local preview nor on the webserver.
any ideas?This is taken from Firefox 9.0.1 -
@-moz-keyframes swing{
0% {
-webkit-transform:rotate(-5deg);
-webkit-transform-origin: 7em 1em;
50% {
-webkit-transform: rotate(5deg);
-webkit-transform-origin: 7em 1em;
100% {
-webkit-transform: rotate(-5deg);
-webkit-transform-origin: 7em 1em;
@-webkit-keyframes swing{
0% {
-webkit-transform:rotate(-5deg);
-webkit-transform-origin: 7em 1em;
50% {
-webkit-transform: rotate(5deg);
-webkit-transform-origin: 7em 1em;
100% {
-webkit-transform: rotate(-5deg);
-webkit-transform-origin: 7em 1em;
@keyframes swing{
0% {
transform:rotate(-5deg);
transform-origin: 7em 1em;
50% {
transform: rotate(5deg);
transform-origin: 7em 1em;
100% {
transform: rotate(-5deg);
transform-origin: 7em 1em;
Is that missing for you?
Maybe you are looking for
-
How can I have podcasts and music in the same playlist in iOS7?
How can I create an iTunes playlist that contains both music and podcasts and export that playlist to my iPhone? This was once possible. If you download the "Podcast" app, podcasts can still be added to iTunes playlist which you can listen to on you
-
Lenovo G510 runs much slower while plugged in
Hi I feel like it's a big problem,because i'm not happy with the situation. I bought g510 with i5 4200m and R7 265m,laptop is great but only great while it lasts on battery...the moment I need to start charging the battery CPU goes mad on me and lock
-
How does a customer talk to a real person?
How does a person talk to a real person at Verizon these days. I have been trying for three days to get help. I am on hold an average of 45 minutes before I hang up feeling frustrated. I can't get a live chat or send an email, so what can a custom
-
InDesign layout embedding into blog/website as a magazine layout to flip pages
Does anybody know if it's possible to use a layout made in InDesign and embed it into blog/html as an online magazine that flips pages? something similar to what ISSUU uses. an example of this is below: www.intandemmagazine.com let me know asap thank
-
K9A2 Platinum & Promise T3 Windows 7 Raid Drivers
Hello, I first want to thank everyone for taking the time to read my post. Hopefully together we can make this work. I am currently running Vista 64BIT and purchased a Windows 7 64 BIT to upgrade. I need helping finding a stable driver for the instal