MSI TV@Anywhere PLUS and Windows 7

I installed Windows 7 (build 7600) and I try to install drivers and PVR for this TV Tuner. Everything was working just fine.
Than I was scaning for channels and in the backgound I saw picture and sound of programs. So when it scan all chanells I click OK and than nothing.
Channels are in, sound is working but there are no PICTURE of a channel. It is all grey.
System:
cpu: E6600
MB: Foxconn MARS
RAM: 4x1GB DDR2 800
GPU: HD 4770 (CCC 9.6)
OS: Windows 7 b7600 x86

Something I found and so simple it's disgusting, right click on the black screen and open the 'Setup' window and click on the 'Video' tab and change the settings, click OK at the bottom when done. This is after simply installing the Vista drivers from MSI and doing nothing else.
Brightness = 110
Contrast = 59
Hue = 0
Saturation = 59
Sharpness = 0
Here's a picture of what settings I'm referring to.
Fine tune adjustments to suit your monitor and eyeballs!
I have started and stopped TV@+ several times and it's still working just fine after setting as above.
Edit: I did install the codecs yesterday in Svet's 'Reply #10' above just in case, I remember needing to do such a thing when I 1st got the card a few years ago.

Similar Messages

MSI TV@Anywhere PLUS remote control shut down problem

Hi!
I have a MSI TV@Anywhere PLUS card working fine. I use the remote control without problem. Except that, when i want to shut down my PC with it. I push "POWER", the app closes, and after that i push "RESET" and I get this: "Press "Power" to shut down your computer, or any other key to cancel" . But whatever I try to push on the remote, nothing happens...but by the mouse, the OK or Cancel buttons work.
Can somebody help , what is going on?
thanks much!

Hi All,
I solved my problem with some trying, this msi remote is really funny....
Okey, so It appears that, when the above mentioned "shut down or cancel" window comes up pushing the "RESET" on my remote, the remote app. stops receiving commands/stops working. If i close this window, I am able to use again my remote controller. phhhh....
All right, lets use the built-in mouse/pointer controller to click (5) on OK in the window, when it is asking for shut down... NOT working either, because as i mentioned above, when the window appears, the remote stops working... jejeje :D
So, I made a shutdown.exe command icon on the desktop, and I can click on it with my remote...solved...
(the remote controller cannot navigate the cursor above the windows taskbar i do not no why..., besides this, it is ridiculous how difficult to move the cursor with he controller, pushing like crazy :D )

MSI TV anywhere plus capturing problem

I just installed MSI TV anywhere plus card, location Canada NTSC-M to copy VHS tapes and burn onto DVD's. I can see and hear the VHS tape running on the computer now, but when I click 'capture' I get 'internal encoder error' and then the program gets hung up and I can't do anything. I am unable to end program, it won't respond. I can't shut down or restart, I must unplug computer. My error report is szappname - MSITVR.exe, szappver - 2.0.2.2, szmodname - hungapp, szmodver offset - all zeros. Please help!
I hope this is all the computer info you need!!
Windows XP Home Edition Service Pack 2 (build 2600)
1000 megahertz AMD Athlon
Board: Asus A7V-VM 1.02
BIOS: Phoenix Technologies LTD 2.07 01/19/01
HL-DT-ST DVD-RAM GSA-H22N [CD-ROM drive]
LG DVD-ROM DRD8120B [CD-ROM drive]
3.5" format removeable media [Floppy drive]
QUANTUM FIREBALLP AS60.0 [Hard drive] 60.04 GB
384 Megabytes Installed Memory
Standard floppy disk controller
Primary IDE Channel [Controller]
Secondary IDE Channel [Controller]
VIA Bus Master IDE Controller
NVIDIA Vanta/Vanta LT (Microsoft Corporation) [Display adapter]
Samsung SyncMaster 17GLi [Monitor]
VIA Rev 5 or later USB Universal Host Controller (2x)
MPU-401 Compatible MIDI Device
MSI 8624 Video Capture
Standard Game Port
VIA AC'97 Audio Controller (WDM)
Lucent Win Modem
Realtek RTL8139 Family PCI Fast Ethernet NIC
Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
HID-compliant mouse
USB Root Hub

Did some more checking. I go from vcr to computer on the rca cables, then I use composite with yuy2 input and avi capture. The program still gets hung up and anything that I capture I am unable to open with either the TV plus program or Windows Media. If I try to capture in mpeg format I get the internal encoder error. Either way as soon as I hit capture, I can see it's recording and its saving data but the program freezes. I can hit 'stop' but its completely hung up.
I have the latest drivers downloaded for TV plus. Got any ideas??

Direct Digital Filing with HP OfficejetPro 8600 Plus and Windows 7

Set up Scan to Network Folder using Direct Digital Filing with HP OfficejetPro 8600 Plus and Windows 7
Can't figure out where the network file folder should be.

went to hp/support, was sent to a sign im page, entered cm750 product number; the site searched my installation to detect the 8600, here are the results:
We were unable to verify your product
Drivers & Updates
Warranty Status
Additional Support
        This tool recommends the latest print driver software to keep your HP product up-to-date.
No Action Needed:HP recommended software installed and up-to-date.
If your product is not printing or scanning correctly, you may want to try the HP Printer Install Wizard to identify software issues. Click the link below to begin:
                   HP Printer Install Wizard for Windows »              No Action Needed:Windows in-Operating System (in-OS) print driver is installed and is currently the only driver available for this product.
For more information on getting the best functionlity from your product with this print driver, click the link below:
                 In-OS Print Driver »
Action Needed:                    Your print driver software is missing or a better version is available. HP recommends installing the following software. Click the link below to begin:
Product Not Supported: This product is not currently supported by this tool. Error: This tool experienced an error while trying to identify the print driver software for your product.
To view additional software for this product, click the link below:
To view all of the software available for this HP product or the HP Printer Install Wizard for Windows, click below:
            Software & Driver Downloads »
HP Printer Install Wizard for Windows »
Please wait while we scan your product for solutions and updates.Your Product:
0%
This should take 1-2 minutes, depending on your computer and connection speed.
HP was unable to verify that you have this product, but did find other products.
                        HP Officejet Pro K8600 Printer »                        Software & driver downloads »                        Support & troubleshooting » Learn how to help HP find your product
                         1 HP products were discovered
Select an option for a product below. Some products may be scanned to identify recommended drivers, updates, and solutions.
»HP Pavilion a6120n Desktop PC                 Serial Number:                                 MXF73106L0                                                Product Number:                                 GC670AA
» Software & Driver Downloads »
Support & Troubleshooting   Well, it did find my desktop. I hve re-installed the 8600 from scratch, downloaded drivers and patches etc. can anyone suggest how to get scanning to work?

MSI K9N Neo board- and Windows 2003 R2

Hello,
I am having some compatibility issues with running a K9N Neo board and Windows 2003 r2
--I cant get core center to run
--I cant get audio/sound to work, it is all installed except for one thing.
so then i killed by loading XP drivers that it did not like.
Does anyone have a list of the minmum drivers off my CD that i should install to get it going, or are they on the MSI site for W2k3? I could not find them.
This machine works totally fine with XP and Vista.
thanks

That is mostly correct, absolutely. But it happens that Microsoft thought-up some security measure or two that prohibits some - for example - updating procedures. Here is an example, but I doubt that is your problem. Please note the kb number, you don't have to learn Swedish.
http://support.microsoft.com/kb/922582/sv
Modificacion: Very few companies do I believe produce special 2003 drivers. Don't think I ever saw any MSI ones, anyway. Isn't it enough that XP and Vista works? Those are better for gaming, entertainment, VOIP and such.

Msi x79a-gd45 plus and Dolby Digital Live

I bought a pair of Astro A50's to enjoy surround sound music and gaming. I have surround for music but with gaming you need Dolby Digital Live to get 5.1 or 7.1 surround sound with this headset. I have a msi x79a-gd45 plus, now does anyone know if DDL is compatible with my on-board sound card? Apparently you can download DDL for 5 dollars and I'd love to for the sake of surround gaming, but only if it actually works with my card.

Have you checked with the Realtek website for that application?

MSI GE60 0NC-622UK and Windows 8.1 secondary HDD sleep bug

Hi All!
I'm struggling with this problem for a long time now. (MSI GE60 0NC-622UK, OS: Windows 8.1, BIOS: 5.14)
There're similar topics on the net:
http://social.technet.microsoft.com/Forums/en-US/58ae1ed5-c643-41ba-95ec-ffa5fbed16af/win-8-keeps-to-shut-down-my-hdds-why?forum=W8ITProPreRel
http://www.eightforums.com/drivers-hardware/4710-secondary-hard-drive-goes-sleep.html
I bought an 256GB SSD in it, so the 750GB HDD is now the secondary one. And the problem is, no matter what I set in Advanced Power Options (never, 0, 600) the OS always puts the hdd into sleep after around 10 seconds (the original windows 8.0 also did the same). The problem is with this the I HAVE to wait couple of seconds when the hdd spins up next time! :(
Only this one helped: http://lytondarque.com/2013/03/29/prevent-hd-sleep-in-windows-8/
It's a small utility called KeepAliveHD (I could only install the v1.4.1 version, but it's working fine.)
So I'm curious is there any other solution beside using an external utility.
Thanks for helping!

Quote from: chros on 09-February-14, 19:03:41
Western Digital 750GB
HDD: WDC WD7500BPVT-22HXZT3
serial number: WD-WX41A8216323
Frimware: 01.01A01
Taken from this: http://www.storagereview.com/western_digital_scorpio_blue_review_750gb_wd7500bpvt
Quote
Power Consumption
The Western Digital Scorpio Blue 750GB actually does okay in power consumption compared to competitors. Its read/write and startup draw numbers are in line with competitors; its idle numbers and random read are noticeably lower. The observed differences are unlikely to make a noticeable impact on battery life. It is worthwhile to note that during our tests when running as a secondary drive the power management seemed overactive in that it would frequently initiate its sleep mode. When this happened the drive would park its head and spin down after only a few seconds.
I think the problem is inherent in the design of the drive. The only way around it is by using a program like you have mentioned, unfortunately.

MSI 7220 (Diamond Plus) and 7800GT/7900GT issue

So I bought the Diamond Plus and the MSI NX7800GT a few weeks ago. Everything set up fine, no problems. I start playing some games, mostly City of Heroes/Villains, and I notice a graphics issue. Objects in the distance are "Z-fighting". It looks as if the Z-buffer's precision is low. I have tried AquaMark3 and I get the same issue, low z-buffer precision. So I sent the video card back, got an EVGA 7900GT. I still have the same exact issue, which never gets better/worse, the problem is always exactly the same. I have tried the card in both PCIe 16x slots and have done a full RAM test. Bios is 3.0A (no difference with 1.0 or 1.16)
Can anyone out there with this Mobo and a 7800GT or 7900GT run AquaMark3 (http://download.guru3d.com/aquamark3/) in demo mode. The demo starts out following a ship, in a few seconds you go up and over a tiny hill and see a vast scene in front of you. Off in the distance, do you see geometry intersecting in an odd way?
I've not noticed any problems in Quake4, Doom3 or 3Dmark, so maybe it's a DirectX only issue. This is extremely frustrating, because I can't imagine what the problem could be. System is completely stable and I have no other problems.
Thanks in advance if anyone out there tries the demo

Quote from: Grouse on 13-April-06, 00:53:42
OI,
As you can see from my sig i have a similar set up. I use antec PSU. The issues your talking about are Likely due to a combination of things not Just one.
First of all are you setting your nvid drivers to the game you are using instead of global settings.
Also what are your amp ratings on your PSU.
Also what are running in your back ground. How many processes?
Have you defragged that drive since your last install?
Have you run dxdiag?
are you using the latest dx version? One came out just recently.
I appreciate all the feedback guys, and as far as these questions, I have tried on 2 clean installs (winxp pro, and winxp x64), and have the same problem. Nothing else running whatsoever, everything updated, etc. It's got to be a hardware issue, and since it's a graphics problem that I've experienced with 2 cards, you guys must be right, it must not be getting enough power. I chose this PSU because Tom's Hardware used it in their test setup with this board (didn't realize it was such a sensative issue). I'll keep messing with it for another day or so. I'll be quite happy if it's just the PSU and I don't have to send the mobo in for replacement.
Thanks again

MOVED: About MSI - TV Anywhere Plus - Windows 7

This topic has been moved to TV Tuner products.
https://forum-en.msi.com/index.php?topic=180060.0

If you installed only the drivers you will have problem. You should also install the PVR application. Here is link to the latest to download from MSI if you need to.
http://us.msi.com/product/mm/TV@nywhere_Plus.html#/?div=Driver&os=Win7%2032
Here is the section of the forum you should have posted in and it's possible you may find other helpful info there.
https://forum-en.msi.com/index.php?board=34.0

MSI X99S SLI PLUS and XP941 - Booting, but very erratic behavior

I finally got my XP941 to boot in my X99S SLI PLUS using the beta BIOS. I Still can't see it listed as a drive in the system settings, but Windows 8 install sees it just fine, and I can see the "Windows Boot Manager" option available to boot from. Windows is booting just fine now, however it will freeze up for about 3 seconds about every 10 seconds. I used CrystalDiskMark and found that speeds were over 1000MB as expected for sequential reads, but 4KQD32 reads were absolutely abysmal. I can't remember the exact number, but it was around .012 I've seen other reviews of the XP941 showing much higher speeds than this. I think the slow random read performance is causing the machine to lockup and have erratic behavior.
Does anybody have any ideas? or can anyone confirm that their SLI Plus is running this m.2 ssd just fine?
Another note is that I am only using 1 4GB Single Dimm of memory until my real memory kit arrives. Would running just a single dimm cause this?

Quote from: Smalto on 04-October-14, 19:19:01
Hello cbutters, I have the same configuration and I cannot manage to have the XP941 working (MZHPU256HCGL-00000).
The win8.1 setup does see it but after copying the files and rebooting it won't start.
What bios version do you use ? Can you indicate the specific settings you modified in the bios to have it working ?
thanks
Using BIOS 136 from here: https://forum-en.msi.com/index.php?topic=183560.0
Using default BIOS settings to start from, then enabling windows 8/8.1 features and changing it to M.2 PCIe. I didn't touch the SATA Config after loading defaults. (I don't have any memory remapping settings available to me either).
Keep in mind that the device won't show up as a sata device, so don't even bother looking for it. You just have to start installing windows and trust that it will show up.... make sure after initially installing windows 8.1 and first reboot that your first boot option is "Windows Boot Manager". The install was really quick. See my youtube video here:

HP Officejet Pro 8500A Plus and Windows 8

Hi all ~
Can anyone tell us what this means and walk us through a fix? (You'll know from the question what our level of expertise is....)
We've had an HP Office Pro 8500A Plus for a couple of years. We just got HP TouchSmart with Windows 8 and while we can print from the computer just fine, we can't scan. When loading the printer CD, we get a message that reads: "install cannot continue....The operating system of this computer is not supported....Upgrade the operating system"
We don't know how to proceed.
Thanks
This question was solved.
View Solution.

Since you are getting an error that the operating system is not supported, you may benefit from going to the HP website and downloading the installation package from there. Here is a link directly to that site (US Version): HP Officejet 8500A Plus Full Feature Software and Drivers.
In this link, you will find all of the software downloads available for the printer.
--Officejet Pro 8500A Plus--
If you are installing the printer with a USB cord, unplug the cord before proceeding. Let me know if I can be of any more assistance.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Video Blaster Webcam Plus and Windows XP

I have a Video Blaster Webcam Plus which was purchased in 2000. Having just up-graded to a new PC using Windows XP I would be grateful for any information on how to install the software to make it run!

Hey I'm having the same problem, and thought that maybe we'd get more help if a few people had this happening? It won't even install for me, when the camera is almost done, the camera beeps twice to say its on and then my computer turns blue and dies. i dont really like that screen, so if anyone can fix it or tell me what to do?

Problems with Creative Video Blaster Webcam Go Plus and Windows XP SP2

Hi,
I have exprienced a big problem since installing Service Pack 2 on Windows XP. My Webcam Go Plus is now providing either a black picture or for a short time the correct picture but then the complete system breaks down. I've already read messages from other users, who had the same problem. So, I tried to install the new driver for "Creative Webcam" but it doesn't work. On the download page for my Webcam Go Plus there is only a driver from 2002, which I already installed before updating to Service Pack 2.
Please help!
Martin

Hey I'm having the same problem, and thought that maybe we'd get more help if a few people had this happening? It won't even install for me, when the camera is almost done, the camera beeps twice to say its on and then my computer turns blue and dies. i dont really like that screen, so if anyone can fix it or tell me what to do?

SQL Anywhere 12 and Windows 9

Hi all,
with Windows 9 in the pipe-line and being released to developers soon (due end of Sept) will SQL Anywhere 12.0.1 be supported on Windows 9?
I called the help line and they didn't have any documentation on Win9 yet.
I also submitted a "Contact Us" request almost 2 weeks ago but have not had a response yet.
Thanks
David

We generally support the latest versions of all of the supported operating systems for the active shipping versions of SQL Anywhere (v12 is currently an active version).
I expect we will support Windows 9 with SQL Anywhere 12, but no final decision has been made. We will need to evaluate the tech. previews as they are released before making that decision.
--Jason Hinsperger
Sr. Product Manager
SAP

MSI-KN8 neo4 Plat and windows booting issues...please help!!!

let me start with my system specs:
msi- 7125 plat KN8 (1B0 bios)
amd 64 3500 venice
1 GB (2 x 512 MB) corsiar valueselect (set at 2.5V)
antec neopower 480W
gigabyte nvidia 6600gt
(2) 80 GB maxtor sata150
250 GB maxtor sata150
zalman 7700 series cpu fan
sony dvd burner.
Thanx in advance for any and all help i am, hopefully about to receive. i read quite a few of previous threads and didnt find one with my issue.
HERE GOES...
this entire system was running with a different brand mobo (just upgraded to this msi-7125) and was running great!!
however when i installed windows xp media center edition 2005, things where working great. that is until i installed the nforce system drivers from the disk that MSI provided me. once i installed the ethernet driver,ide-sw driver, network controller the ask me for a reboot after install was done, when the system restarted i got all the way the windows xp splash screen or loading screen. at that point windows stops loading stays on the loading screen for about 10 minutes, then the computer shuts off.
i have tried running memtest and had no errors, im positive that my psu is capable of handling my components.
i'm really stuck on this one, any help would great thanx again!!!
Sam

You should be able to get into Windows through safe mode. From here uninstall the drivers and restart. You should hopefully be able to get into Windows normally now. Get hold of the latest drivers from the Nvidia web site and try them.
Also check both Ethernet controllers are enabled in the BIOS.

MSI TV@Anywhere PLUS and Windows 7

Similar Messages

Maybe you are looking for