MSI TV @nywhere plus and Satellite?

Hello, new to this card, just bought it new in box, just wondering if it will work with dish and bev sats?
I don't see many options, though there is a freq scan for manual entry though what those would be who knows?
Thanks,
Diabolical :D

you need to connect your satellite receiver set-top box to the TV@nywhere Plus card using either the composite or S-Video inputs. then you'll use the set-top box to change channels, as the TV@nywhere Plus card can't do that

Similar Messages

MSI TV@nywhere plus Remote with Windows 7 64 bit

I have the TV@nywhere plus and Windows 7 64 bit. Everything works except the remote. I downloaded the latest drivers from the MSI site and I have the remote icon in the bottom right of the screen. However it does not work. If I click on it (the icon) and under settings it shows MediaCenter; I can not get it to recognize the MSI TV software. And the remote doesn't work in Media Center either. Any suggestions? Thanks.

Did you download the >> TV@nywhere series Remote Utility << or just the other drivers? If it doesn't work with the Vista utility then it's not going to work in W7 64 bit.

READ this: MSI TV @nywhere Plus + Dscaler

My Pinnacle pctv pro has gone ( I suspect overheating).
Used Dscaler for tv (ecxelent picture, ultra fast channel switchig) and VDub for recording (Huffyuv lossless codec).
It was super card. On differnt forums I read:this card is good, this card is peace of ....., but I think that every card is good as long it has good software.
Dscaler pulls maximum of the card out. For me is one of the best programs ewer written. :biggthumbsup:for the author !!
So I decided to buy something cheap. I bought MSI TV @nywhere Plus about 4 monthes ago.
Installation go smooth, MSI TVR works without problems, but TV picture was, like I ecxpected, not even close Dscalers.
After many ours, managed to work it with Dscaler 4.1.15.
Settings: Card Asus 7131D
Tuner Philips TDA8275
For each channel choose right Format ( for me Pal-B) and frequency.
Picture is on channels with good reception like watching DVD, but channel switch is a little bit slow ( the card is not directly supported).
Note - Dscaler is just for watching, for recording is original Msi Tvr more than good.
I had problem to use Dscaler and Msi tvr together ( Msi tvr reports error - list index out of bounds), but i solved it -
send shortcut C:\Program Files\MSI\TV@Anywhere Plus\TVR\MSITVR.exe to desktop and run it from there.
Remember - dont ecxpect miracles with MSI TV @nywhere Plus but for this money ( 3 x cheaper then was my pctv pro), must say that MSI TV @nywhere Plus is ecxellent card.
Hope, that I helped anyone with this.
Intel P4 3.0 Ghz BOX, 1Mb, 800M
Albatron PX865PE pro
2 x 512MB Ram
Radeon 9600 XT 256MB
MSI TV @nywhere Plus
Technisat SKYStar 2
120 Gig HDD SATA WD, 40 GIG ST, 160 gig USB2.0
LITE-ON DVD-RW
Taxan 21"
Windows XP SP2
.

glad you're enjoying it! i don't use my TV@nywhere Plus much, apart from to use it to play my Nintendo GameCube, but i think its an all round better solution than the TV@nywhere Master it replaced (as well as being much cheaper too). however, once you go down the Digital TV route, you'll never go back to analogue TV again

MSI TV@nywhere plus sound

I have the MSI TV@nywhere plus card v 1.0. The tv and radio work... but my left speaker does not work. I hear the radio but it is distorted. I have boston speakers ba635. Any help would be appreciated.. Thank you

check the audio lead from the TV@nywhere Plus is fully connected into the Line-In socket on your soundcard (or motherboard, if you have onboard sound)

Msi x79a-gd45 plus and Dolby Digital Live

I bought a pair of Astro A50's to enjoy surround sound music and gaming. I have surround for music but with gaming you need Dolby Digital Live to get 5.1 or 7.1 surround sound with this headset. I have a msi x79a-gd45 plus, now does anyone know if DDL is compatible with my on-board sound card? Apparently you can download DDL for 5 dollars and I'd love to for the sake of surround gaming, but only if it actually works with my card.

Have you checked with the Realtek website for that application?

MSI 7220 (Diamond Plus) and 7800GT/7900GT issue

So I bought the Diamond Plus and the MSI NX7800GT a few weeks ago. Everything set up fine, no problems. I start playing some games, mostly City of Heroes/Villains, and I notice a graphics issue. Objects in the distance are "Z-fighting". It looks as if the Z-buffer's precision is low. I have tried AquaMark3 and I get the same issue, low z-buffer precision. So I sent the video card back, got an EVGA 7900GT. I still have the same exact issue, which never gets better/worse, the problem is always exactly the same. I have tried the card in both PCIe 16x slots and have done a full RAM test. Bios is 3.0A (no difference with 1.0 or 1.16)
Can anyone out there with this Mobo and a 7800GT or 7900GT run AquaMark3 (http://download.guru3d.com/aquamark3/) in demo mode. The demo starts out following a ship, in a few seconds you go up and over a tiny hill and see a vast scene in front of you. Off in the distance, do you see geometry intersecting in an odd way?
I've not noticed any problems in Quake4, Doom3 or 3Dmark, so maybe it's a DirectX only issue. This is extremely frustrating, because I can't imagine what the problem could be. System is completely stable and I have no other problems.
Thanks in advance if anyone out there tries the demo

Quote from: Grouse on 13-April-06, 00:53:42
OI,
As you can see from my sig i have a similar set up. I use antec PSU. The issues your talking about are Likely due to a combination of things not Just one.
First of all are you setting your nvid drivers to the game you are using instead of global settings.
Also what are your amp ratings on your PSU.
Also what are running in your back ground. How many processes?
Have you defragged that drive since your last install?
Have you run dxdiag?
are you using the latest dx version? One came out just recently.
I appreciate all the feedback guys, and as far as these questions, I have tried on 2 clean installs (winxp pro, and winxp x64), and have the same problem. Nothing else running whatsoever, everything updated, etc. It's got to be a hardware issue, and since it's a graphics problem that I've experienced with 2 cards, you guys must be right, it must not be getting enough power. I chose this PSU because Tom's Hardware used it in their test setup with this board (didn't realize it was such a sensative issue). I'll keep messing with it for another day or so. I'll be quite happy if it's just the PSU and I don't have to send the mobo in for replacement.
Thanks again

MSI TV @nywhere Plus - Scheduled Recording not working

I just installed TV Anywhere Plus on my new Windows 7 PC, and everything works fine, except for the "Scheduled Recording" button. Has anybody experienced that before? What could be the problem?

Quote from: blazing storm on 07-February-10, 04:51:17
What exactly happens when you click the button?
Do you have the latest drivers installed for your card?
http://eu.msi.com/index.php?func=downloaddetail&type=driver&maincat_no=132&prod_no=616
The problem was that when I click the button nothing happened. But now it does.
I installed the driver as on the website you gave me.
Seems that [probloem is solved with that.
Thanks

MSI Tv @nywhere Plus to FTA

I am trying to program this nice tv tuner with my FTA box. Does anyone know if you can do this? I hope you can.

Quote from: Bas on 04-October-07, 17:48:43
Stu, FTA (=Free to air) and that receiver is a Sat-receiver.
However, Stu is right, I would buy a Sat-FTA card and plug the dish directly into the computer.
It gives you way more options.
Yes, something like the TV@nywhere Satellite might be better for you

MSI X99S SLI PLUS and XP941 - Booting, but very erratic behavior

I finally got my XP941 to boot in my X99S SLI PLUS using the beta BIOS. I Still can't see it listed as a drive in the system settings, but Windows 8 install sees it just fine, and I can see the "Windows Boot Manager" option available to boot from. Windows is booting just fine now, however it will freeze up for about 3 seconds about every 10 seconds. I used CrystalDiskMark and found that speeds were over 1000MB as expected for sequential reads, but 4KQD32 reads were absolutely abysmal. I can't remember the exact number, but it was around .012 I've seen other reviews of the XP941 showing much higher speeds than this. I think the slow random read performance is causing the machine to lockup and have erratic behavior.
Does anybody have any ideas? or can anyone confirm that their SLI Plus is running this m.2 ssd just fine?
Another note is that I am only using 1 4GB Single Dimm of memory until my real memory kit arrives. Would running just a single dimm cause this?

Quote from: Smalto on 04-October-14, 19:19:01
Hello cbutters, I have the same configuration and I cannot manage to have the XP941 working (MZHPU256HCGL-00000).
The win8.1 setup does see it but after copying the files and rebooting it won't start.
What bios version do you use ? Can you indicate the specific settings you modified in the bios to have it working ?
thanks
Using BIOS 136 from here: https://forum-en.msi.com/index.php?topic=183560.0
Using default BIOS settings to start from, then enabling windows 8/8.1 features and changing it to M.2 PCIe. I didn't touch the SATA Config after loading defaults. (I don't have any memory remapping settings available to me either).
Keep in mind that the device won't show up as a sata device, so don't even bother looking for it. You just have to start installing windows and trust that it will show up.... make sure after initially installing windows 8.1 and first reboot that your first boot option is "Windows Boot Manager". The install was really quick. See my youtube video here:

Msi TV @nywhere plus

Has anyone tried getting this card to work under Arch?
Im considering buying one but i want to do some research before i do.
MSIs specification sheets says there is a saa7131 chipset and the tda8275 tuner onboard, which afaik should work fine under linux.
well id love to hear some success stories and and not as successful ones too, would be good for the problems that might lie ahead

Quote from: blazing storm on 07-February-10, 04:51:17
What exactly happens when you click the button?
Do you have the latest drivers installed for your card?
http://eu.msi.com/index.php?func=downloaddetail&type=driver&maincat_no=132&prod_no=616
The problem was that when I click the button nothing happened. But now it does.
I installed the driver as on the website you gave me.
Seems that [probloem is solved with that.
Thanks

MOVED: msi K8N diamond plus and ram

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=95876.0

*** I don't want to open another topic so I'll post here ***
Can anyone please recommend a 2x1GB kit compatible with MS-7220 and runs in at least DDR-500 mode?
I'm about to complete my rig and I don't know what RAM to buy.
My options are:
*** GSkill F1-4000BIU2-2GBHV PC4000 3-3-2-8 (Dual Channel) 2048MB kit (2x1024MB) dual channel pack *** NOT in my country
*** GSkill F1-4000USU2-2GBHZ PC4000(DDR500) 3-4-4-8 (Dual channel) Samsung / 2048MB kit (2x1024MB) dual channel pack
*** Corsair TWINX2048-4000PT 2048 MB DDR / 500 MHz / 3-4-4-8
*** Corsair TWINX2048-4400PRO 2048 MB DDR / 550 MHz / 3-4-4-8
I heard that there are some problems with the BIOS on MS-7220. Will I be able to run the memory at DDR-500? On what BIOS version?
Thanks!

MSI TV@Anywhere PLUS and Windows 7

I installed Windows 7 (build 7600) and I try to install drivers and PVR for this TV Tuner. Everything was working just fine.
Than I was scaning for channels and in the backgound I saw picture and sound of programs. So when it scan all chanells I click OK and than nothing.
Channels are in, sound is working but there are no PICTURE of a channel. It is all grey.
System:
cpu: E6600
MB: Foxconn MARS
RAM: 4x1GB DDR2 800
GPU: HD 4770 (CCC 9.6)
OS: Windows 7 b7600 x86

Something I found and so simple it's disgusting, right click on the black screen and open the 'Setup' window and click on the 'Video' tab and change the settings, click OK at the bottom when done. This is after simply installing the Vista drivers from MSI and doing nothing else.
Brightness = 110
Contrast = 59
Hue = 0
Saturation = 59
Sharpness = 0
Here's a picture of what settings I'm referring to.
Fine tune adjustments to suit your monitor and eyeballs!
I have started and stopped TV@+ several times and it's still working just fine after setting as above.
Edit: I did install the codecs yesterday in Svet's 'Reply #10' above just in case, I remember needing to do such a thing when I 1st got the card a few years ago.

MSI X99S SLI PLUS and 5820k Overclocking failed

I'm trying to overclock this processor on this nice board
But somehow as soon as I raise the BCLK it won't start, even for 1 extra Mhz (100 --> 101).
My memory : Gskill DDR4 3000 Mhz is compatible and I just used the included XMP profile.
I will describe here what I have done but I cannot find a solution to raise the BCLK.
Step 1 : check the CPU overclockability at BCLK 100 Mhz.
Vcore @ 1.2v and Vring @ 1.2v --> perfectly stable @ 4Ghz for core and 3.5 Ghz for ring.
Not very high but at least it works and it validates this first steps. I'm planning on going higher but after completing step 2.
Step 2 : under clock the core and ring but raising the BCLK.
Vcore @ 1.3v and Vring @ 1.3v --> the system starts @ BCLK = 100 Mhz but refuses to start @ BCLK = 101 Mhz and above . Ratio on both core and ring are set so that frequency stays @ 2.8 Ghz.
Memory is left to Auto on all settings.
If you have any idea that could help I'll be happy to try.
Thanks.

It worked !
What I did was setup the value to 125 by hand. And reboot. But the motherboard wouldn't start ...
So I looked at the indicated values and I saw the memory with this setting was supposed to run at 3334 Mhz ! which of course was the source of the problem. So I tried various settings for the memory and the one that worked was CLK @ 266, Speed @ Auto and XMP @ enabled.
With these settings the MB booted correctly !
So I can now continue to fine tune, especially core and ring frequency and voltage.
Thanks for your help, I think that discussing and exchanging ideas helped me. Hope some thers can benefit from it.

TV@nywhere Plus remote issue resolved!!!

I have been searching and reading many posts to fix my remote issue / not working problem. I have had a MSI TV@nywhere Plus TV tuner for like a year and the remote never worked. I don't know the exact model number of the tuner card. I know my driver for the TVR is 2.0.2.2. I have the software that has the PVR Plus. I had seen several posts that link the issue to running the Initervideo Cinema Manager which I ran and I still did have any luck. So I uninstalled Intervideo WinDVD (which I did and this did not resolve the issue either) I left this program uninstalled an I searched the CD for some info.
The CD I have has a version number on the bottom around the hole MSI_7131_V1.1.
I found a program called P3XRCtl.exe that has a icon of a remote in the path E:\PCI\TVUtility (this is on the CD). I copied this program to my desktop and then clicked on the icon. Guess what, it worked!!! All of the functions on the remote work. It seems as if when I installed the software that this remote software/utility did not get installed and does not run when the TVR program starts. So I then created a folder in my program files to place this exe file. The path I placed it is C:\Program Files\MSI\TV@Anywhere Utilities (I created the TV@Anywhere Utilities folder) The MSI folder now has 2 folders called TV@Anywhere Plus & TV@Anywhere Utilities. I still had a problem of the program not starting when I start the TVR program so I added the exe file to the Startup folder. To do this create a shortcut to the exe file and place this new shortcut in C:\Documents and Settings\All Users\Start Menu\Programs\Startup
This program will now start everytime the computer starts and the remote should work when the TVR program is started. I am running Win XP Pro...

This is wonderful I just solve my problem with the Remote Control, I Follow the suggestions from this people and my problem is fixed... now I can use it. Thank You very much

Can't get msi TV@nywhere to work with kt4v-l MB.

I recently bought a Msi KT4V Mother Board And A MSI TV@nywhere Card and it wont boot up it conflicts with the memory.
|MSI KT4V-L|AMD 2200+|NVIDIA GeForce FX 5200 128MB|CD-RW|DVD-RW|512 MB DDR PC2100.
PLEASE HELP.

Hi-
Welcome to Discussions!
The updates for the Geforce2 are to provide high resolution monitor support.
Though specifically stated as for use with Apple monitors, I would try updating the ROM of the Geforce first.
VGA may not work with the widescreen monitor, but DVI might.
There is no guarantee that the card will work with the monitor, but with the update, it should output digital resolutions of up to 1920x1200.
Using an ADC to DVI adapter might be the best way to go (with the update as well).
http://www.amazon.com/Belkin-F2E9142-WHT-Apple-Monitor-Adapter/dp/B000067RLH

MSI TV @nywhere plus and Satellite?

Similar Messages

Maybe you are looking for