MSI TV@nywhere plus Remote with Windows 7 64 bit

I have the TV@nywhere plus and Windows 7 64 bit. Everything works except the remote. I downloaded the latest drivers from the MSI site and I have the remote icon in the bottom right of the screen. However it does not work. If I click on it (the icon) and under settings it shows MediaCenter; I can not get it to recognize the MSI TV software. And the remote doesn't work in Media Center either. Any suggestions? Thanks.

Did you download the >> TV@nywhere series Remote Utility << or just the other drivers? If it doesn't work with the Vista utility then it's not going to work in W7 64 bit.

Similar Messages

READ this: MSI TV @nywhere Plus + Dscaler

My Pinnacle pctv pro has gone ( I suspect overheating).
Used Dscaler for tv (ecxelent picture, ultra fast channel switchig) and VDub for recording (Huffyuv lossless codec).
It was super card. On differnt forums I read:this card is good, this card is peace of ....., but I think that every card is good as long it has good software.
Dscaler pulls maximum of the card out. For me is one of the best programs ewer written. :biggthumbsup:for the author !!
So I decided to buy something cheap. I bought MSI TV @nywhere Plus about 4 monthes ago.
Installation go smooth, MSI TVR works without problems, but TV picture was, like I ecxpected, not even close Dscalers.
After many ours, managed to work it with Dscaler 4.1.15.
Settings: Card Asus 7131D
Tuner Philips TDA8275
For each channel choose right Format ( for me Pal-B) and frequency.
Picture is on channels with good reception like watching DVD, but channel switch is a little bit slow ( the card is not directly supported).
Note - Dscaler is just for watching, for recording is original Msi Tvr more than good.
I had problem to use Dscaler and Msi tvr together ( Msi tvr reports error - list index out of bounds), but i solved it -
send shortcut C:\Program Files\MSI\TV@Anywhere Plus\TVR\MSITVR.exe to desktop and run it from there.
Remember - dont ecxpect miracles with MSI TV @nywhere Plus but for this money ( 3 x cheaper then was my pctv pro), must say that MSI TV @nywhere Plus is ecxellent card.
Hope, that I helped anyone with this.
Intel P4 3.0 Ghz BOX, 1Mb, 800M
Albatron PX865PE pro
2 x 512MB Ram
Radeon 9600 XT 256MB
MSI TV @nywhere Plus
Technisat SKYStar 2
120 Gig HDD SATA WD, 40 GIG ST, 160 gig USB2.0
LITE-ON DVD-RW
Taxan 21"
Windows XP SP2
.

glad you're enjoying it! i don't use my TV@nywhere Plus much, apart from to use it to play my Nintendo GameCube, but i think its an all round better solution than the TV@nywhere Master it replaced (as well as being much cheaper too). however, once you go down the Digital TV route, you'll never go back to analogue TV again

TV@nywhere Plus remote issue resolved!!!

I have been searching and reading many posts to fix my remote issue / not working problem. I have had a MSI TV@nywhere Plus TV tuner for like a year and the remote never worked. I don't know the exact model number of the tuner card. I know my driver for the TVR is 2.0.2.2. I have the software that has the PVR Plus. I had seen several posts that link the issue to running the Initervideo Cinema Manager which I ran and I still did have any luck. So I uninstalled Intervideo WinDVD (which I did and this did not resolve the issue either) I left this program uninstalled an I searched the CD for some info.
The CD I have has a version number on the bottom around the hole MSI_7131_V1.1.
I found a program called P3XRCtl.exe that has a icon of a remote in the path E:\PCI\TVUtility (this is on the CD). I copied this program to my desktop and then clicked on the icon. Guess what, it worked!!! All of the functions on the remote work. It seems as if when I installed the software that this remote software/utility did not get installed and does not run when the TVR program starts. So I then created a folder in my program files to place this exe file. The path I placed it is C:\Program Files\MSI\TV@Anywhere Utilities (I created the TV@Anywhere Utilities folder) The MSI folder now has 2 folders called TV@Anywhere Plus & TV@Anywhere Utilities. I still had a problem of the program not starting when I start the TVR program so I added the exe file to the Startup folder. To do this create a shortcut to the exe file and place this new shortcut in C:\Documents and Settings\All Users\Start Menu\Programs\Startup
This program will now start everytime the computer starts and the remote should work when the TVR program is started. I am running Win XP Pro...

This is wonderful I just solve my problem with the Remote Control, I Follow the suggestions from this people and my problem is fixed... now I can use it. Thank You very much

Remote VPN access with Windows 7, 64 bit

Hey there,
What do you guys suggest for Remote VPN access with Windows 7, 64 bit?

Hi,
You can configure a Remote access VPN with a windows 7, 64 bit client. You wieall hav to download a IPsec VPN client specially for a 64-bit machine. It should not give you much trouble.
The client is vpnclient-winx64-msi-5.0.07.0290-k9.exe. it is available on cisco.com site.
hope this helps.
Regards,
Anisha
P.S.: please mark this thread as resolved if you feel your query is resolved. Do rate helpful posts.

Is CS3 Design Standard compatible with Windows 7 64-bits and MS Office 2010 Pro Plus?

Hi,
I have been googling around to see if Adobe CS3 Design Standard is compatible with Windows 7 64-bits with MS Office 2010 Pro Plus, but I couldn't find a decent answer.
If anyone here has any idea on this, please let me know.
As far as i know Adobe CS3 comes with Adobe Acrobat 8 Pro which is not compatible with MS Office 2010, so I am sort of worried that I will need to upgrade my CS3 to CS6.
Any advises are welcome.
Thanks.

I don't know if Acrobat 8 is Win 7 64 bit compatible or if it's supported. The rest of the apps should be fine.
But I do think you'll have issues with Office 2010 files being placed into InDesign.
Moving to CS6 is something you should be thinking about very soon. You only get upgrade pricing until the end of the year, but I highly recommend taking a look at Creative Cloud. At $29.99/month for the first year it's a bargain.
Bob

I need help with my MSI Dragon edition 2 with windows 7 64 bit home edition

I recently got my laptop from Xotic PC with windows 7 64 bit home version which was free. The only problems I have for the laptop is that I can't detected the Nvidia Geoforce GTX 780m graphics card on my system or update it, games on steam tend to lag like Metro the last night which came free for me but even at low settings the lag was really bad. Sometimes the screen starts flickering becasue of a display driver error after playing a game or closing a game. So if anyone can help me with these issues I would really appreciate helping me fix these errors.

Please click link below to download driver.
http://www.msi.com/service/download/nbdriver-19693.html
or you can use GeForce Experience, keep drivers up to date.
http://www.geforce.com/geforce-experience

I need drivers for TV @nywhere Plus Remote Controller!

Hi, I'm really getting depressed because I'm searching for drivers for months. I have TV @nywhere Plus but I lost my CD long time ago and I didn't care because everything still worked fine but last year I reinstalled my XP and everything changed from that day. I found drivers online for the TV card but not for my remote controller (actually I found something like that in the official site but it's not working and it's not the same like from the CD). And I continued searching and searching and lost hopes, and my remote controller stopped working, I bought new today and I hoped to fix it but still I can't make it work because I don't have drivers. :(
So guys, can you just send me the same drivers from this CD because I know they are there and they could help me. I really hope you have that CD. I found info in this topic - TV@nywhere Plus remote issue solved! - and I need exactly this program - P3XRCtl.exe version 2.0 something like that. It's a blue icon. I can't download anywhere this thing online :(
You are my last hope to help me, I don't want to dissapoint my parents again. Thank you again
P.S I bought the same things years ago

Yes but the version is 3.0 and not 2.0 and when I install it and start it I see the icon working but my controller is not working. And on the app when I open the settings it says something like - hold the power button on remote controller and choose the app you want to start and there is a blank list (probably there should be TV anywhere programme and when u choose it to start working. And that's it. It's just useless and I don't know why, I am holding the button trying to make something installing uninstalling and it's the same thing.

MSI TV@nywhere plus sound

I have the MSI TV@nywhere plus card v 1.0. The tv and radio work... but my left speaker does not work. I hear the radio but it is distorted. I have boston speakers ba635. Any help would be appreciated.. Thank you

check the audio lead from the TV@nywhere Plus is fully connected into the Line-In socket on your soundcard (or motherboard, if you have onboard sound)

Flash player 11.0.1.152 installation problem with Windows Vista 64-Bit

Hello,
I just can't get Flash Player to install on my computer with Windows Vista 64-Bit - doesnt matter if I try with Firefox, Opera or IE (I usually use Firefox).
The download isn't a problem, but when I start the downloaded .exe, this file just disappears from my download folder and nothing happens - besides starting a process called install_flashplayer11x32_mssd_aih_3.exe, which does nothing. The usual installation popup never appears. After that I can't try starting the installation again, until disabling the process via task manager ("Only a single instance of this application may run"). Doesn't matter if I try the download and installation with or without "McAffe Security Plus" btw - same result.
I never had such a problem before - Flash Player 10.3 was and is no problem to install and use.
I have tried all the measures suggested in the troubleshooting section on the official site, including the advanced troubleshooting measures (uninstall old version, run as administrator, disabling software firewalls, disabling virus scanner etc.). Nothing helps.
I don't got those problems with my laptop running Windows 7 - just my desktop computer with Vista 64-Bit.
Any help would be greatly appreciated.

Try using the installers from the links in http://forums.adobe.com/thread/909550
P.S. topic moved to the Installation section of the forum.

MSI Digi Vox Micro HD on Windows 7 64 bit Laptop

I have a problem with my MSI Digi Vox Micro HD on Windows 7 64 bit. After inserting the cd with the drivers I get a pop up to autorun it. After I clicked Yes the installation didn't start. Instead I'v got an Invalid path error and the autorun froze. I'v had no other options then to install every single program separately for the tuner from the cd. First the Driver, than Arc soft, Media converter, total media running the *setup.exe files from the CD. I'v restarted the Laptop and wanted to configure the tv signal. I'v started the Total media 3.5 application and went to Setup->TV menu. There was this option: Select "Next" to begin configuring your TV signal (NEXT/Cancel). At any time I'v tried I get "The device cannot be detected or it is not supported." This device should be compatible with windows 7 (it is advertised so). How come these errors occur? What could be the main problem? How can I get my tuner work properly? Please help I'm very disappointed.

Quote
This device should be compatible with windows 7 (it is advertised so)
Yes, but as you are using 64bit Win7, does the driver CD contain 64bit drivers?
At present, there are no drivers listed for download on the product page:
http://eu.msi.com/index.php?func=proddesc&maincat_no=132&prod_no=1878
Maybe you could ask MSI Support about this: http://support.msi.com

Extigy with Windows 7 64 bit

Hey everyone,
I've got a SB Extigy which has served me just awesome for years and years now. ?I recently upgraded to a better computer with Windows 7 64 bit, and have found that the driver CD which came with the card will no longer install on this OS. ?Windows will recognize it; the rear stereo out and the headphone out are acti've (both at the same time!) however the volume control knob no longer works, the remote doesn't work (I mainly use it just for volume) but most importantly the MIDI ports don't work. ?I use this computer to make music, so I really need to get the MIDI ports operational or get a new card. ?Since this card has been working so beautifully for so long, I don't want to switch unless I absolutely have to. ?I have tried running the CD install in compatibility mode for XP/2000 but no dice. ?I found [url="http://forums.creative.com/t5/Windows-7/Extigy-Drivers-for-Windows-7/m-p/54202" rel="nofollow">another thread[/url] on here where this guy seemed to get it to work, but didn't really leave instructions as to how. ?He gave[url="http://members.driverguide.com/driver/detail.php?driverid=93720" rel="nofollow"> this link [/url]to download the drivers, but there is no exe in there.... how can I install these drivers without the installerI went to the device manager and tried to do an update driver with the source pointed to these files, but I informs me I currently have the most up to date driver already installed.
I'm hitting a dead end here. ?And would be immensely grateful for any helpful suggestions. ?THX!!

i have sound blaster extigy and i didn't use it win7 64 bit

TS4062 hi can somebody help me... itunes does not accept the iphone 4s but i already have the version 64 bit to work with windows 7 64 bit, the computer recognizes the phone but itunes sais i need 64 bit itunes.... please is there something im missing...

hi can somebody help me... itunes does not accept the iphone 4s but i already have the version 64 bit to work with windows 7 64 bit, the computer recognizes the phone but itunes sais i need 64 bit itunes. please is there something im missing... thanks

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

Unable to view external webcam content. I'm using IE11 with Windows 7 64 bit. I've tried deactivating Activex control, tried different browsers etc, tweeked the tools for trusted sites etc, but am totally stuck. I know the cams are working as i can view

Unable to view external webcam content. I'm using IE11 with Windows 7 64 bit. I've tried deactivating Activex control, tried different browsers etc, tweeked the tools for trusted sites etc, but am totally stuck. I know the cams are working as i can view them on mobile phone via puffin browser. I can play Youtube videos etc just fine. So why not the webcam?

First, confirm that ActiveX Filtering is configured to allow Flash content:
https://forums.adobe.com/thread/867968
Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
You can try to work around these issues by using Compatibility View:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
If that is too inconvenient, using Google Chrome may be a preferable alternative.

Is RoboHelp 7 compatible with Windows 8 64-bit?

Is Robohelp 7 compatible with Windows 8 64-bit?

Hi Waltw1207,
I use the original Technical Communication Suite (FM8 + RH7). With all the necessary patches installed, it worked perfectly for years on XP. This is not the case on Win 8 (64-bit). I tried everything to get it working in the new OS environment - but to no avail.
My solution was to install an Oracle VM VirtualBox. I set it up as follows
- 4 CPUs (I have an i7 in the PC)
- 4GB RAM
- Windows XP
Then I installed the TCS in this VM environment. It works brilliantly. No more problems with FM and RH, plus I can run other 64-bit applications on the host machine.
Hope this helps
P.S. If you decide to go down this road, remember to deactivate your application before you install it in the VM environment.

Adobe PDF Printer not working as print driver; 9.5.5 (pro) with Windows 7, 64 bit

I have installed, repaired, uninstalled and re-installed Acrobat Pro 9.5.5 on a newly formatted SSD with Windows 7, 64 bit on my desktop machine. The program was installed from Acrobat Pro 9.0.0 and updated within the program. I have the program also installed on my laptop, and the Adobe PDF Printer driver is working properly on my laptop.
On my desktop with the newly formatted SSD, the Adobe PDF printer driver is not working. Note that I am using the printer driver, and not any pdf creation techniques within MS Office or other programs.
When I go to the Adobe PDF printing preferences on my desktop, I only get a generic, two tab window open. When I print a file to this printer on my desktop machine, I do not get a window opening that asks where to create the pdf or what to name it, and I never see any files created. In MS Word, the Create PDF option under the Acrobat tab works and opens a dialog to ask the name and location to save, and then opens a PDF Maker progress window and properly creates the file. I can also save a file as an .eps or .ps file and use Distiller to create the pdf. However I cannot get the Adobe PDF printer driver in my Devices and Printers to work properly, although it works just fine on my laptop with the same program (Pro 9.5.5) and same Windows version (7, 64 bit).
Repairing, uninstalling and re-installing does not solve the problem. Acrotray.exe *32 process is running. Any ideas on why this won't run properly on my desktop, but will run on a similarly configured laptop?
On my laptop, I get a full, (7) tabl menu with all the normal options:

I found this answer from Deepak Chauhan on another forum, and it solved this problem!
Try this to add Adobe PDF printer manually on Windows 7, and Windows Vista.
If windows 7 is Enterprise or better edition: (Admin rights required)
Start>search for printmanagement.msc and open the print management module
Expand the print server and expand the computer name to see availbale printers, drivers and printer ports.
- from printers ensure there's no Adobe PDF printer, if there is delete it
- go to ports and delete the PDF ports (the ones ending in *.pdf)
- go to drivers and delete the PDF converter.
Take note if any errors occur, but continue with the following steps regardless.
If on windows 7 home edition, just goto start>Devices and Printers and ensure PDF pritner is not listed.
Then open the registry (if any erors deleting these keys happen, see below)
1: go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Print\Printers
delete any adobe PDF printer subkey present
2: go to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors
delee the PDF port monitor if present
3: go to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Printers
again delete and pdf printer subkey
If any erros occur, you need to set the owner of the key to the currently logged in admin user, then ensure that user has full control.
Do this by right-click the key and selecting permissions, clicking on advanced, then the owner tab.
Once you've all that has been done, open a command line as administrator.
Copy and pate the following commands in order
1: net stop spooler
2: rundll32.exe setupapi.dll,InstallHinfSection AdobePDFPortMonitor 128 C:\Program Files (x86)\Adobe\Acrobat 9.0\Acrobat\Xtras\AdobePDF\AdobePDF.inf
3: net start spooler
4:rundll32.exe printui.dll,PrintUIEntry /if /b "Adobe PDF" /f "C:\Program Files (x86)\Adobe\Acrobat 9.0\Acrobat\Xtras\AdobePDF\AdobePDF.inf" /r "Documents\*.pdf" /m "Adobe PDF Converter"
That should set back the pdf printer.
This seemed to provide the link that provided the Adobe PDF Settings tab to the Adobe PDF Printing Preferences that was missing!

MSI TV@nywhere plus Remote with Windows 7 64 bit

Similar Messages

Maybe you are looking for