MSI twin frozr 4 GTX 670 fan problem

Hello
Just notice that only one fan on my GPU is spinning up.
I did notice my temps were getting a bit high under load, then I noticed the card was on running the one fan.
Does this sometimes happen or should both fans be on at the same time?
Thanks for any reply.
Obsidian 650d case
ocz 700 watt modular psu
Asus Sabertooth 990fx motherboard
8GB hyper x RAM
Phenom 1100t cpu
GTX 670

Hi
Latest update. I rma'd the card. It was sent back fault not found, both fans working.
I installed the card back into my system and only the one fan is working. I tried all four pci-e slots and still only one fan works.
I don't think it has anything to do with the motherboard as i installed my gtx 570 twin frozr 3 and both fans are working
I have all latest drivers for the card and chipset installed
I have no clue now, thanks for any advice

Similar Messages

  • MSI twin frozr 4 GTX 670

    Hello
    Having a slight problem with my gpu, maybe it is not a problem though.
    My MSI twin frozr 4 GTX 670 is idling at a great temp of 28 Celsius.
    When I play battlefield 3 or future soldier my card temps hit 80 degrees, I also hit 82 degrees in fur mark.
    Is this high temps for this card
    thanks

    Well I guess your card is a GTX 670 Power Edition because that uses Twin Frozr 4. 80 or 82°C is by far no problem especially not in Furmark. Besides the Twin Frozr 4 has more potential and gets my (much overclocked) GTX 680 Lightning to stay at 60°C under load but I have a very decent ventilation in my bigtower case. So with better airflow you'd have better temps but none the less the current temps are still far from problematic.

  • MSI twin frozr II freeze and glitch problem.

    Hi everyone,
    I have a very annoying problem with my card. Whenever I play BF3 with a total random time I get some green glitches and the display freeze (see the attached screen).
    Normally I get right back on windows with this little popup "display driver stopped answer and recovery successful". But now it just freeze and I have to do a hard reboot...
    Here is my config:
    -I7 2600k
    -Asus p8p67 pro rev 3.1
    -2x4Gb Ripjaws X
    -OCZ 850w 80gold+
    -MSI twin frozr II GTX 580 with latest drivers
    -Win 7 64b
    I've already look around google, I'm not alone but it seems there is no real solution. It's really sad to have this kind of prob with that expensive card... without any solution.
    Some help would be very nice.
    Thanks for any help.

    Quote from: messem on 08-November-11, 00:11:28
    I've never flash my vbios.
    But after downloading and trying to flash it with the link you provide nvflash says that my current version is: 70.10.20.00.01 and the one I downloaded is 70.10.17.00.01.
    So am I already in the lastest ?
    Thanks
    this number is not vBIOS ID, so in all cases it will remain the same.

  • Twin Frozr II GTX 580 Fan speed unlock

    Hi all,
    My GTX 580 appears to be over heating so i'd like to be able to flash the bios if possible, (any tips appreciated) with a modified file to unlock the 30-100% speed fan profile.
    Any help appreciated.
    Kind regards!

    Quote from: poxxxy on 13-September-12, 18:15:28
    Thanks, already know my way around Afterburner though . Its limited to 80% max fan speed... thats the issue! I want to unlock the 100% fan speed.
    I downloaded the newest GTX 580 BIOS from the MSI website, and modified it with NiBiTor. There are numerous articles on how to do, and flash the BIOS properly, with a google search.

  • MOVED: MSI TWIN FROZR II GTX 480

    This topic has been moved to Overclockers & Modding Corner.
    https://forum-en.msi.com/index.php?topic=146789.0

    @sylarnbg
    Bumping is now allowed, >>Please read and comply with the Forum Rules.<<
    Quote from: sylarnbg on 15-March-11, 19:46:37
    thanks for the answer. yes i know it's great that i recieved this version
    Edit: It hast the standard clock speeds, so is it reference design, which a normal gtx 480 watercooler would fit?
    you have to check compatibility with cooler makers.
    also installing 3th party cooler will void your warranty

  • MSI Twin Frozr 275 GTX stays at very low clocks

    I just recently received the above card 2 days ago and after installation I didn't really notice a positive difference from my 8800GT and sometimes worse performance.  Then I installed MSI afterburner and setup monitoring on all of the clocks: Core, Shader, and Memory.   This is how it reads  300 core idle  602 shader idle  and 100 for the memory clock when it is idle.  After playing Crysis for 5 mins I closed the game and saw that the max numbers for my card was  400 core 800 shader and 297 memory.  How do I get my card to run full speed?  All of my games are pretty much the same as my 8800gt (which is impressive for the low clocks) But the reason I upgraded was to have a completely faster card.  Any ideas?

    Hello and welcome, please list all specs of your computer including details from psu, like amps on +12V, etc.
    This way we can help you better.
    Thanks

  • MSI Twin Frozr GTX 560 Ti II kernel driver error

    I am using Nvidia 275.33 with the MSI Twin Frozr GTX 560 Ti II & keep getting kernel driver errors, cant run any games the screen goes black & the system locks up
    Already tried multiple re installs of the driver & all the tweaks suggested
    This is within warranty but I moved to India from the US & bought this on Amazon :(
    i5 2500 K
    8 GB RAM
    Win 7 Home premium
    Asus P8P 67
    How do I update the bios?
    My current version is 70.24.11.00.00
     

    Hey I had similar problem, try installing the MSI drivers http://www.msi.com/product/vga/N560GTX-Ti-Twin-Frozr-II.html#/?div=Driver&os=Win7%2032 , try the 266 ones, if they dont work try the 280, for me personally the 280.26 driver worked. Even when i had already tried the 280.26 driver from the official nvidia website. Hope this works for you too

  • GTX 560 TI BIOS 70.24.2E.00.6C URGENTLY REQUIRED for my msi twin frozr 2.

     GTX 560 TI BIOS 70.24.2E.00.6C  URGENTLY REQUIRED for my msi twin frozr 2.

    hi,
    My seriel no is 602-v328-16sb1102202576. i am on bios 70.24.oa

  • MSI Twin Frozr Gtx 770 4gb uefi bios

    Hey guys.
    First time posting here.
    Does my graphics card come with a uefi bios? If not, how do I get one and how do I flash it? I'm experiencing black screen hangups on startup, on a new build and people say a bios flash may be the solution.
    Thanks.
    My current bios: ht tp://ww w.2sh ared.co m/file/qpo5L9 My/GK104.ht ml
    please delete spaces (says I'm not allowed to post external links, sorry)

    A few weeks ago, I built my own pc and installed Windows 8.1. I've installed just basic drivers from vendors websites and avast, malwarebytes, some benchmarking utilities and games. I'm getting really sluggish startup speeds, and my pc stops at a black screen after the windows logo but before the logo. The way I would describe the black screen is, it happens after the windows logo but before the welcome screen - a black screen from 8-15 seconds. I cannot move my cursor or see anything. Some research from the likes of eightforums etc suggests its my gpu drivers, so I decided to post here.
    What I've tried:
    Reinstalled video card drivers to see if it stops black screening
    Full virus scan
    Made startup programs and services minimal
    Checked event viewer for anything peculiar - nothing came up, besides a driver related to my asus motherboard - AMDA00 Interface. I have since disabled it, as its not needed. Still no difference.
    Reinstalled windows 8.1. Still the same.
    When I boot in safe mode, I also get the "hanging" black screen, although it doesn't last as long.
    My specs:
    CPU: Intel i5 4670K (Stock Speeds)
    Motherboard: Asus Maximus VII Ranger
    RAM: Corsair Vengeance LP - 2x4GB @ 1866Mhz
    GPU: MSI Twin Frozr GTX 770 4GB - CPU Cooler: Be Quiet! Dark Rock Pro 3 CPU Cooler
    PSU: EVGA SuperNova G2 750W
    Storage: Seagate Barracuda 2TB HDD
    Case: Fractal Design Define R4 Windowed (with Red AKASA Led Strips)
    Display: Benq GL2460HM 24" Monitor
    Keyboard/Mouse: Basic sumvision keyboard and tecknet mouse - both USB. No other peripherals connected.
    Any help is appreciated and feel free to ask for any more info.
    Thanks

  • MSI Twin Frozr II Radeon HD 6950 2GB w/Sony Bravia

    I have been trying for 8 months to get my MSI video card to work. I am trying to connect to a 46" Sony Bravia LCD TV via hdmi to hdmi.  It works fine from the BIOS all the way to the point right before logging into windows. What can I do!?
    MSI Twin Frozr II Radeon HD 6950 2GB - w/updated drivers
    Gigabyte z68xp mb - fresh drivers and flashed bios
    windows 7 - w/all updates
    No other errors.
    It works fine with windows standard drivers, it's not until I install the real drivers for it or windows update does it's thing that the card becomes worthless.
    Please help!!!!!
    Thanks,
    Rene

    I have a http://www.google.com/url?sa=t&rct=j&q=monster%20122504&source=web&cd=1&ved=0CFYQFjAA&url=http%3A%2F%2Fwww.amazon.com%2FMONSTER-122504-SUPERTHIN-CABLE-SSST-6%2Fdp%2FB008F717DE&ei=ftb4T5rVK4Gc8gT1isXXBg&usg=AFQjCNFXbhglHFzq7j5_p0zxoJJEI0CfTg&cad=rja
    hdmi monster super thin 6ft just bought a few months ago, the most expensive one they had. I used other cables that weren't name brand and had the same problem. I've tried several different cables. They all work on my laptop, not my desktop (with the msi card).

  • MSI Twin Frozr 2 OC 580GTX High Load temps

    Hi all,
    I've recently purchased a MSI msi twin frozr ii oc gtx580 (1.5gig) card. When idle, my card temperature is just 38c, but when the GPU usage reaches max (e.g. when playing games like BF3) the temperature goes upwards of 95C. All of my settings are at the factory overclock and I've tried using several drivers including 263.09, 280.26 and 285.36. Has anyone else experienced similar temperatures?

    I've got a coolermaster atcs 840 case with a total of 6 Fans:
    -1x 240mm Fan in the front pulling air in
    -2x 120mm fans at the front (after the HDD compartment) pushing air to the rest of the case
    -2x 240mm fans at the top pushing air out
    -1x 120mm fan at the rear pulling air in from the outside through a small 120mm rad.
    I previously had an ati 5830 installed (stock) and it never went above 79C.
    Leaving the side door open doesn't have any effect

  • MSI Twin Frozr 3GD5 V2/OC 7950

    Hi guys,
    Been searching everywhere but I can't find out what has changed on the MSI Twin Frozr 3GD5 V2/OC 7950 from the original (not V2). Anyone have any idea if it is just a bios revision or a slight hardware (cooler/fans) change?
    Many thanks!

    you can ask msi:
    >>How to contact MSI.<<

  • MSI TWIN FROZ GAMING GTX 770 UEFI/GOP COMPATIBLE BIOS

    Hi,
    I just purchased a MSI TWIN FROZ GAMING GTX 770
    SN 602-V282-220B1310063340
    VBIOS MS-V282 NV282MS.352
    BIOS 80.04.C3.OO.21(P2005-0000)
    i would like to use an UEFI/GOP compatible BIOS on it.
    Thanks in advance.

    use this one
    https://forum-en.msi.com/index.php?topic=182093.msg1308154#msg1308154

  • UEFI Bios Request for MSI Twin Frozr III HD 7950 O/C Non Boost card, has 7970pcb

    Its this one       Version:    015.020.000.000.001083    You make this forum far to complicated to navigate for old people  , could not figure out how to insert an image, and you can't post external links either. So i linked the bios version, great cards by the way i have two of them, purchased a new motherboard that supports UEFI so I wanted to try. Thanks. More info:
    GPU Device Id: 0x1002 0x679A
    113-C3861300-X01 113-MSITV277MS.202 TAHITI B0 PROH C38613 GDDR5
    3GB 500E/150M
     (C) 1988-2010, Advanced Micro Devices, Inc.
     ATOMBIOSBK-AMD VER015.020.000.000.001083
    C3861300.101 PowerTune Limit: 175 to 260
     CCC Overdrive Limits
    GPU Clock: 1100.00 MHz
    Memory Clock: 1575.00 MHz
     Clock State 0 Core Clk: 880.00 MHz
    Memory Clk: 1250.00 MHz
    Flags: Boot Clock State 1
     Core Clk: 880.00 MHz
    Memory Clk: 1250.00 MHz
     Flags: Optimal Perf Clock State 2
     Core Clk: 880.00 MHz
    Memory Clk: 1250.00 MHz
    Flags: UVD Clock State 3
    Core Clk: 300.00 MHz
    Memory Clk: 150.00 MHz Flags:

    S/n : 602-v277-05sb1205073711   first card      S/n 602-v277-05sb1206017147  for Msi Twin Frozr III Hd 7950 o/c regarding UEFI bios request.

  • MSI Twin frozr 4gb OC Gaming 770 Overclocking?

    Is there a way to unlock the voltage on this card? MSI Twin frozr 4gb OC Gaming 770? I clicked unlock voltage in afterburner but it did nothing? Just trying to find if there is a way.

    What do you mean by unlocking? For the GTX770 (except for Lightning) 1.2/1.212 V is the absolut limit (without hardware and eventually bios modding). Anthing else is not possible. If you can't apply any overvoltage use the latest bet aAfterburner: https://forum-en.msi.com/index.php?topic=161235.msg1257833#msg1257833

Maybe you are looking for

  • A Troubleshooting Guide for Windows Vista and iTunes 8 - user supported

    ITunes 8 and Windows Vista can be an explosive combination. Having helped to troubleshoot some problems for people, I decide to consolidate my information all down to one post. The information comes from various sources, and I will try to annotate wh

  • Error 1611

    I have been trying to get the new update since early today. I spent over 2 hours on the phone with Apple Care and they told me there is nothing more then can do. When I try to restore when downloading the new 2.0 it just comes up with Error: The ipod

  • SUP and SQL login failed

    Hi, Been racking my brain about this one, searched online (including here) but haven't found a solution yet. My scenario is: SCCM 2012 R2 and SQL 2012 (with databases CM_SCM and SUSDB, instance name is MSSQLSERVER) installed on the same server. SCCM

  • Flex Drag And drop

    Hello All, I'm having problems suspending a drag and drop operation based on User input from an Alert prompt. i have a flex tree that acts as a drag initiator and a drop target as well (Dragging items of the tree within the tree itself) I'm trying to

  • Can't Get Good Service - HELP!

    I waited in line for over an hour at the AT&T store because my iphone keeps freezing and will not hold a charge. After finally bering "served", I was told to call Apple. I have called Apple three times, waited on hold and listened to their music once