MSI Twin Frozr GTX 760 Graphics Card Not being Recognised as Hardware onComputer

you probably got a DOA (Dead On Arrival) one it happens occasionally for every electronic part (just get it exchanged for another)!

I have had my graphics card for 1 year and 3 months and had no problems yet out of no my monitor no longer displays picture when i connect my HDMI to the graphics card slot. However when i connect the HDMI to the motherboard slot, it displays an image...

Similar Messages

Re: MSI Twin Frozr GTX 760 Graphics Card Not being Recognised as Hardware onComputer

Have you tried the DVI connection? The VGA connection? Do any connections from the graphics card work at all right now?

Has anyone have MSI true color run on MSI GS 60 2QD?
my system information is:
Nvidia GTX 965
Ram 16gb
Haswell 4th gen 4720
I have updated the latest BIOS and Firmware ( the firmware that stated that it support True Color AP); however, I could not have...

Secondary graphics card not being recognised.

I just got my laptop back from being repaired, and it seems that, after freshly installing arch, the secondary GPU is not being recognised. I have used lspci and xrandr --listproviders and have come up with only the integrated card. Currently I am running on a samsung series 7 chronos 15.6 inch with the HD intel integrated chipset and a second Raedon HD6490M. Any ideas? Thank you for any help you can give, and I hope my formatting was alright. I am new to the forum.
[fox@Fox ~]$ lspci
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4)
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4)
00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b4)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
02:00.0 Network controller: Intel Corporation Centrino Wireless-N + WiMAX 6150 (rev 67)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
04:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller
[fox@Fox ~]$ xrandr --listproviders
Providers: number : 1
Provider 0: id: 0x47 cap: 0xb, Source Output, Sink Output, Sink Offload crtcs: 3 outputs: 5 associated providers: 0 name:Intel
[fox@Fox ~]$

I went back earlier today and tryed looking into my BIOS and came up with nothing. There, oddly enough, is no setting to enable or disable, or even set some sort of graphics card. I have; however, looked into the problem a bit more and by luck found that others with the same laptop had a sort of similar problem on windows, and they used the SWupdate tool to fix it. I am going to try sometime soon to make a small partition and install windows, and hopefully update the BIOS.

GEFORCE GTX 570 TWIN FROZR ll/OC GRAPHIC CARD NOT WORKING SERIAL NO::602-V255-01

I'M FRM INDIA I PURCHASED THE CARD ON 25-05-2011 THE CARD COMES WITH THREE YEARS WARRANTY AND FROM YESTERDAY THE CARD STOPS WORKING AND WHEN I CONNECT TO DVI OR HDMI PORT THE IS NO SIGNAL BUT THE FAN IN THE CARD IS RUNNING.SO I CONTACTED DIGICARE CHENNIA INDIA FOR RMA (RMA No.RTI-13215043)THEY ASK TO SEND THE CARD I SEND THE CARD AND THEY TOLD ME THAT THERE IS BURNT PCB SO WARRANTY IS NOT APPLICABLE I HAVE PAID IND 25000-/(USD 461.042) FOR THE CARD AND WITH 1 1/2 YEARS THE CARD FAILS I'M USING A GOOD POWER SUPPLY CORSAIR HX 750 WATT MSI BIG BANG XPOWER MAINBOARD. I'M USING MSI FOR MORE THEN 6 YEARS MY FIRST BOARD MSI X48C PLATINUM AND THE BOARD WORKS WELL UNTIL NOW SINCE 1 1/2 YEARS WARRANTY LEFT FOR THE CARD ANY ME I'M NOT A MILLIONAIRE TO SPEND AGAIN 461 DOLLAR TO BUY NEWCARD

>>Please read and comply with the Forum Rules.<<
>>Posting Guide<<

MSI Twin Frozr Gtx 770 4gb uefi bios

Hey guys.
First time posting here.
Does my graphics card come with a uefi bios? If not, how do I get one and how do I flash it? I'm experiencing black screen hangups on startup, on a new build and people say a bios flash may be the solution.
Thanks.
My current bios: ht tp://ww w.2sh ared.co m/file/qpo5L9 My/GK104.ht ml
please delete spaces (says I'm not allowed to post external links, sorry)

A few weeks ago, I built my own pc and installed Windows 8.1. I've installed just basic drivers from vendors websites and avast, malwarebytes, some benchmarking utilities and games. I'm getting really sluggish startup speeds, and my pc stops at a black screen after the windows logo but before the logo. The way I would describe the black screen is, it happens after the windows logo but before the welcome screen - a black screen from 8-15 seconds. I cannot move my cursor or see anything. Some research from the likes of eightforums etc suggests its my gpu drivers, so I decided to post here.
What I've tried:
Reinstalled video card drivers to see if it stops black screening
Full virus scan
Made startup programs and services minimal
Checked event viewer for anything peculiar - nothing came up, besides a driver related to my asus motherboard - AMDA00 Interface. I have since disabled it, as its not needed. Still no difference.
Reinstalled windows 8.1. Still the same.
When I boot in safe mode, I also get the "hanging" black screen, although it doesn't last as long.
My specs:
CPU: Intel i5 4670K (Stock Speeds)
Motherboard: Asus Maximus VII Ranger
RAM: Corsair Vengeance LP - 2x4GB @ 1866Mhz
GPU: MSI Twin Frozr GTX 770 4GB - CPU Cooler: Be Quiet! Dark Rock Pro 3 CPU Cooler
PSU: EVGA SuperNova G2 750W
Storage: Seagate Barracuda 2TB HDD
Case: Fractal Design Define R4 Windowed (with Red AKASA Led Strips)
Display: Benq GL2460HM 24" Monitor
Keyboard/Mouse: Basic sumvision keyboard and tecknet mouse - both USB. No other peripherals connected.
Any help is appreciated and feel free to ask for any more info.
Thanks

MSI Twin Frozr GTX 560 Ti II kernel driver error

I am using Nvidia 275.33 with the MSI Twin Frozr GTX 560 Ti II & keep getting kernel driver errors, cant run any games the screen goes black & the system locks up
Already tried multiple re installs of the driver & all the tweaks suggested
This is within warranty but I moved to India from the US & bought this on Amazon :(
i5 2500 K
8 GB RAM
Win 7 Home premium
Asus P8P 67
How do I update the bios?
My current version is 70.24.11.00.00

Hey I had similar problem, try installing the MSI drivers http://www.msi.com/product/vga/N560GTX-Ti-Twin-Frozr-II.html#/?div=Driver&os=Win7%2032 , try the 266 ones, if they dont work try the 280, for me personally the 280.26 driver worked. Even when i had already tried the 280.26 driver from the official nvidia website. Hope this works for you too

UEFI BIOS Request for MSI Twin Frozr GTX 770 4GB

Hello,
My S/N is 602-V282-22SB1308028712
I have a Twin Frozr GTX 770 with 4GB of memory.
Thank You!

Use the attached.
Decompress the provided .rar archive with Winrar: http://www.rarlab.com/download.htm
Then flash the included file with Nvflash for dos: http://www.guru3d.com/files_details/nvflash_download.html
To do so rename the included file to .rom and create a dos bootstick (https://forum-en.msi.com/index.php?topic=165175.0)
Put nvflash and the vbios file on it and boot from the stick. Then type nvflash -4 -5 -6 gop.rom (if renamed vbios that way) and hit enter. Confirm the questions and let the tool flash.

MSI Twin Frozr GTX 770, "Non-windows Logo Graphics Card" No GOP detected?

Hi,
I'm wondering what to do, I have just recently built a brand new computer, everything put together correctly, once I load the system to put the operating system on I'm getting this error ""Non-windows 8 Logo Graphics Card, No GOP detected"?
anybody have any idea what I can do to get around this?

Either switch to legacy mode instead of UEFI booting or update vga with a GOP vbios. To find the correct one add the card's S/N and a copy of your current vbios by saving it to file with gpu-z, uploading it to some file hoster and adding the link here.

MSI Twin Forzer GTX 760 no longer recognised in Windows or showing in BIOS

This evening when I switched on my PC, I got no signal to my monitor.
* I checked all the connections from my DVI -> VGA connector
* I Tried with an HDMI cable
Both would no produce a signal. I then checked in the BIOS (MSI z87-g65) and the PCIe 16x slot it was in is showing as empty. So I took it out and switched slots and it's still showing as empty.
It is getting power as far as I can see, the fans start up - and I've checked the PCIe power connections.
The card is < 1 year old - has anyone experienced anything similar that I can fix, or is the card RMA?

Quote from: flobelix on 19-January-14, 21:02:10
>>Clear CMOS<< of the board and retry. If possible try card in another machine.
While I originally hadn't tried this, I do have multi-bios and switched to the second one - still had the same problem. I have tried this now, still the same issue.
Here is screenshots showing it in place, you may be able to see fans are working - and screenshot of the BIOS board explorer showing empty slot: h ttp://imgur.com/qgWTyp1,2garjoU
This is the overall parts list: h ttp://uk.pcpartpicker.com/b/DT7

MSI N560GTX-Ti Twin Frozr II/OC: Graphical Glitches/Corruption

Hello, I bought and installed an MSI N560GTX-Ti Twin Frozr II/OC video card one week ago. For the last week, it has been running perfectly, but today when I started up a game the 3D graphics began glitching and showing random stretched triangles and distorted models. While the 3D graphics are running, the monitor randomly loses signal from the video card and occasionally the program will crash with a popup bubble stating that the NVIDIA driver has recovered from a problem.
After reading through some posts here, I downloaded the MSI Afterburner program, enabled voltage monitoring, and set everything to defaults.
The defaults are:
Core Voltage: 1000 mV
Core Clock : 880 MHz
Shader Clock : 1760 MHz
Memory Clock : 2100 MHz
When I click the button to run a Kombuster stability test, the 3D has the same graphical glitches that I saw in my games. Here is a screenshot:
http://i733.photobucket.com/albums/ww333/MP64x2/corrupted_880.jpg
I tried lowering the Core Clock speed and retrying the test. It appears that the level of corruption is proportional to the clock speed. At the minimum clock speed of 440 MHz, the graphics are almost perfect, however a glitch or two will still occasionally show up.
Here is the test at Core Clock = 705 MHz: http://i733.photobucket.com/albums/ww333/MP64x2/corrupted_705.jpg
and at 440 MHz: http://i733.photobucket.com/albums/ww333/MP64x2/corrupted_440.jpg
- I've tried bumping up the Core Voltage a little to around 1020 mV, but it doesn't seem to have any effect.
- Lowering the Memory Clock also reduces glitches, but they never go away completely.
- Even at the absolute minimum clock settings, my games still glitch and crash.
- I do not have access to another system that I can try the video card in.
System Info
CPU: Intel Core 2 Quad Q9450 2.66GHz
MoBo: Abit IP35 Pro - LGA775, Intel P35, FSB1333
RAM: G.Skill 4x2GB DDR2 800 (PC2 6400) Dual Channel (Total: 8GB)
Video Card: MSI N560GTX-Ti Twin Frozr II/OC
Video S/N: 602-V238-130B1103126135
Video BIOS: 70.24.11.00.00
NVIDIA Driver: 266.66
Hard Disks: 2x 640GB Western Digital WD6401AALS
OS: Windows 7 Ultimate 64-bit
Power Supply:
OCZ GameXStream OCZ700GXSSLI 700W
+3.3@36A,+5V@30A,+12V1@18A,+12V2@18A,+12V3@18A,+12V4@18A,[email protected],[email protected]
As I type this I'm starting to get corruption right on my desktop too, with random pixels changing color and black rectangles appearing on applications.
From what I've read in other threads, it seems like my power supply may not be sufficient since it has multiple 12V rails, but before I spend ~$100 on a new one I thought I'd see if anyone had any other thoughts.

Quote from: MP64 on 22-April-11, 03:46:20
I have an interesting update on my original problem.
A week after I reseated the card, the graphical glitches returned. I turned the computer off, reseated the card again, turned it on, and it began working fine.
Another week goes by with no problems, and then a couple days ago the glitches came back. Thinking it strange that the card could somehow take approximately the same amount of time to cause the same kind of bad connection, I wondered if there was something else that was causing the glitches to temporarily disappear.
I tried rebooting my computer, but the glitches remained.
I then completely turned off my computer and pulled out the power cord and left it for a couple minutes. I didn't open the case at all and made sure not to do anything that would bump any components. I turned the computer back on - glitches are gone once again.
So, it would seem that it may in fact have something to do with the power supply and not any bad connections with the card itself - at least, that's the best guess I have at the moment. I leave my computer on 24/7 so it seems like it doesn't like being left on for an entire week with this new video card installed.
Does this sound sensible? Is it possible for a power supply to slowly fail over several days, only to start working again after being powered down for a couple minutes?
Did you ever figure your issue out? I have the exact same issue. My system runs fine for almost a week...and then my desktop starts artifacting. The only way it goes away is to unplug my pc (or flip the switch on PSU). Then it runs again perfectly for nearly a week again and I start getting artifacts and the message stating that the graphics driver has stopped working and then recovered.
I also run my pc 24/7 and this problem is getting very annoying! My PSU shouldn't be a problem as I have the PC & Cooling 750W...
Oh...almost forgot. I've seen the same issue on 2 video cards now. RMA'd the first one and the second one does the exact same thing...

MSI twin frozr 4 GTX 670

Hello
Having a slight problem with my gpu, maybe it is not a problem though.
My MSI twin frozr 4 GTX 670 is idling at a great temp of 28 Celsius.
When I play battlefield 3 or future soldier my card temps hit 80 degrees, I also hit 82 degrees in fur mark.
Is this high temps for this card
thanks

Well I guess your card is a GTX 670 Power Edition because that uses Twin Frozr 4. 80 or 82°C is by far no problem especially not in Furmark. Besides the Twin Frozr 4 has more potential and gets my (much overclocked) GTX 680 Lightning to stay at 60°C under load but I have a very decent ventilation in my bigtower case. So with better airflow you'd have better temps but none the less the current temps are still far from problematic.

UEFI Bios Request for MSI Twin Frozr III HD 7950 O/C Non Boost card, has 7970pcb

Its this one Version: 015.020.000.000.001083 You make this forum far to complicated to navigate for old people , could not figure out how to insert an image, and you can't post external links either. So i linked the bios version, great cards by the way i have two of them, purchased a new motherboard that supports UEFI so I wanted to try. Thanks. More info:
GPU Device Id: 0x1002 0x679A
113-C3861300-X01 113-MSITV277MS.202 TAHITI B0 PROH C38613 GDDR5
3GB 500E/150M
(C) 1988-2010, Advanced Micro Devices, Inc.
ATOMBIOSBK-AMD VER015.020.000.000.001083
C3861300.101 PowerTune Limit: 175 to 260
CCC Overdrive Limits
GPU Clock: 1100.00 MHz
Memory Clock: 1575.00 MHz
Clock State 0 Core Clk: 880.00 MHz
Memory Clk: 1250.00 MHz
Flags: Boot Clock State 1
Core Clk: 880.00 MHz
Memory Clk: 1250.00 MHz
Flags: Optimal Perf Clock State 2
Core Clk: 880.00 MHz
Memory Clk: 1250.00 MHz
Flags: UVD Clock State 3
Core Clk: 300.00 MHz
Memory Clk: 150.00 MHz Flags:

S/n : 602-v277-05sb1205073711 first card S/n 602-v277-05sb1206017147 for Msi Twin Frozr III Hd 7950 o/c regarding UEFI bios request.

GTX 560 TI BIOS 70.24.2E.00.6C URGENTLY REQUIRED for my msi twin frozr 2.

GTX 560 TI BIOS 70.24.2E.00.6C URGENTLY REQUIRED for my msi twin frozr 2.

hi,
My seriel no is 602-v328-16sb1102202576. i am on bios 70.24.oa

MSI Twin Frozr II Second card failure

hi guys, got the above card RMA'd replaced 3 months ago and now I have the exact same issues with the screen scattering, lines, blocks etc, just like before.
Have stripped mobo down to bare minimums and still the same.
Have an OCZ600SXS psu with 18A on the +12v rail that supplies the card.
I have heard that some OCZ supplies have issues but, as it worked fine for 3 months, I cannot see it being the PSU
Is this looking like yet another RMA to MSI?
thanks, Gordie

test the card in another computer who has different and more powerfull PSU
Quote
MSI Twin Frozr II Second card failure
what card exactly?

Lighting effects filter not available on PScc - using windows 8.1 with GeForce GTX 680 graphics card

I have Photoshop cc and Lightroom 5.5. My computer runs windows 8.1, 64 bit, with GeForce GTX 680 graphics card.
I am trying to use the lighting effects filter, but it is grayed out so I cannot select it.
Can you tell me what I need to change in order to use the lighting effects filter?

This is the Lightroom forum. I don't use the lighting effects very often in Photoshop. But if I recall correctly, it will only work on 8-bit images.

MSI Twin Frozr GTX 760 Graphics Card Not being Recognised as Hardware onComputer

Similar Messages

Maybe you are looking for