Msi u270 screen resolution only 1024x600?

How to increase screen resolution on netbook msi u270? its only 1024x600, any solution?

Not at all if you have the standard 11.6" screen being at a native resolution of 1024x600. Only the optional 12.1" or 11.6" HD screens feature 1366X768

Similar Messages

  • Satellite Pro A30 - 1024 X 768 screen resolution only

    My Satellite Pro A30 will only run at a screen resolution of 1024 X 768 can I increase this ? I did not see any options in the display settings or the BIOS

    Hi Carl,
    I believe that 1024 X 768 is the maximum availavle screen size for your A30. You can, of course reduce this to a smaller value if you wish but you will not be able to increase it.
    The value is set in the deisplay properties available from the control panel, or by right clicking on the desktop area and selecting 'properties'. The value is set by the slider in the lower left hand corner of the window.
    HTH

  • Msi GE620DX screen resolution

    Hi folks,
    just bought a usedMSI GE620DX and updatede the OS to a Win 7 Pro, and downloaded and updated all the drivers and apps plus all windows updates.
    but the problem that i have that the spec on the net and labels on the notebook says that the screen resolution should be FHD 1920x1080 but windows says that the max is 1366x768 and the screen is a Generic PnP monitor. is there any way to change this so that i can get Full HD?

    Hi again,
    here is a screenshot of AIDA64 with monitor information

  • Satellite Pro U400 - How do I get the native screen resolution for external monitor?

    I have a samsung syncmaster external screen connected to a Satellite Pro U400.
    The screen resolution only goes up to 1280 etc however the samsung minimum is 1440 x 920 (ish I forget).
    How do I get the samsung to display the whole enlarged screen to save my eyes from the realativively small internal screen?

    Hi
    > The screen resolution only goes up to 1280 etc however the Samsung minimum is 1440 x 920 (ish I forget). How do I get the Samsung to display the whole enlarged screen to save my eyes from the realativively small internal
    I??ve got a U400 which was equipped with the Intel graphic card and I??ve got an external LCD which I have connected to the U400 using the DVI-to-HDMI cable.
    My U400 unit supports the HDMI and the LCD the DVI port.
    I have received also the driver disk with my LCD and I have installed the software.
    I have also update the Intel driver and used one from the Intel page.
    Now I have the access to many different external resolutions and can choose it.

  • Problem to change screen resolution in MB Intel DG41 with video on board

    Hi, I need some help as soon as possible because this problem it´s make me difficult my job. I have installed the MAC OS Snow Leopard 10.6.2 in a Motherboard Intel DG41 with micro Core2Duo and video on board of this motherboard and don´t let me change screen resolution. I have a display of 22´ inches and the panel to change the screen resolution only mark 1024x768. I think the more likely it is that the system does not recognize me the drivers to this chipset of video. I searched everywhere on the internet but I have not found the solution.
    Thanks Fernando

    First of all sorry for my English is not very good. My PC is an Intel MotherBoard DG41 with onboard video and a micro Core2Duo. The system is MAC OS Snow Leopard 10.6.2.
    Thanks for replying

  • 2011 MBP having limited screen resolution in Bootcamp

    Hi All,
    Running Bootcamp 4.0 with Win7. Bootcamp software is installed, drivers seem to be in place.
    The screen has a limited resolution though, not the full 1440 x900 that it should have. Clicking on screen resolution only shows the one option for resolution.
    Any thoughts?
    A few other data points, loaded the bootcamp partion up in Parallels and I get the full resolution experience.

    That's odd.  Which model are you running?  13", 15", or 17"?
    It's entirely possible that the Intel (13") or AMD (15"/17") video driver might not have installed properly.  Check the Device Manager (Start > right-click Computer > Manage, then click Device Manager at left of the resulting window).  If under Display Adapters you see "Standard VGA Graphics Adapter", or a "Video Controller" under Other Devices, then this may be your issue.
    Running Boot Camp Setup a second time should fix this, but it's also possible that the driver CD did not burn properly and therefore the folders that contain drivers might be corrupted enough so as not to have been read during Setup.  In this case, your best bet is to burn the CD again--to a known-good CD-R.
    Nate

  • Error msg: your sys doesn't have required screen resolution

    Just downloaded & installed Presenter 9 trial version on my Win 7 system. My screen resolution only has two available settings, and neither one matches the precise resolution setting that the error msg says my system needs. What do I do?

    It is due to the cable that you are using. For DVI, there are 2 main type of cables in the market, DVI-D Single Link & DVI-D Dual Link.
    Extract from Wikipedia
    If you are using a DVI-D Single Link cable, the max resolution natively is 3,840 × 2,400 @ 17 Hz, which is unusable under normal usage. The next best max resolution is 1440 × 900 @ 60 Hz which is usable under normal usage.
    However, if you are using DVI-D Dual Link cable (not referring to Dual Monitor support here), the max resolution natively is 3,840 × 2,400 @ 33 Hz with GTF blanking, which is also unusable under normal usage. The next best max resolution is 2,560 × 1,600 @ 60 Hz with CVT-RB blanking, which is usable under normal usage.
    For full information, please refer to this link at Wiki. http://en.wikipedia.org/wiki/Digital_Visual_Interface

  • MSI R7770 GHZ Edition Screen Resolution Reverts

    My Screen Resolution sometimes reverts to 1024*786, when PC starts. It doesn't happen every time, but once in a day or 2-3 days after. My recommended resolution is 1600*900.
    Using latest version of graphics driver 13.12, downloaded from MSI official website.
    I have tried uninstalling & re installing. Then formatting & fresh install. But no luck. Please help me regarding this matter. 
    Thanks...

    A Radeon 7770 requires 19A on +12v and a 500W psu minimum what makes your psu inadequate. That on the other hand is not the only problem. This old Fujitsu PC lacks an updated bios for supporting new vgas especially as new like the 7770. Also it is an old PCI-E Gen1 board AMD Gen2 or Gen3 cards usually cause trouble with or refuse to work at all. To sum up the possibility to run the card in your old Fujitsu PC is very slim or there's even none. 

  • I cannot enlarge photos on Facebook, I only get a BLACK, BLANK screen when I click on them-someone suggested it might be "Screen Resolution Setting"? I've already uploaded new firefox version. Please help!

    I am not able to ENLARGE photos on Facebook, this means photos that friends post on News Feed & photos that I post in my FB photo albums. I only get a BLANK, BLACK screen when I click on individual photos. A friend suggested that I upload the New Firefox, and I did this today, but it did not resolve problem. Friend also suggested that it could be "Screen Resolution Setting"?? OR "Data Rate" too slow?? I do not know how to check these features? Please help! If it could be something else, please let me know. Thank you for your time & help!

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    You can use these steps to check if images are blocked:
    * Open the web page that has the images missing in a browser tab.
    * Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
    * Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
    * Go to the <i>Media</i> tab of the "Tools > Page Info" window.
    * Select the first image link and scroll down through the list with the Down arrow key.
    * If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
    See also:
    * http://kb.mozillazine.org/Images_or_animations_do_not_load

  • My AT&T Yahoo email gives me an error message saying that my screen resolution is too low, but it is at 1600 x 900. This only happens in Firefox, not in IE.

    When I try to use Firefox to access my ATT.NET account I get an error message about my screen resolution being to low to support the site.My resolution is not low its at the highest available. I also use IE9 and do not have this problem. I am running Windows 7 and Firefox 15.0.1. This has been an ongoing problem. I am using a Toshiba laptop 15.6 screen with 4GB RAM. I see other complaints about this specific problem but have yet to find a solution. Thanks for your help.

    Please see added comments on the question. Its not a zoom issue its all about the new ATT design email and Firefox, I agree with Noah there a bug between the old and the new and firefox only.
    UPDATE:
    I stand corrected. I went back in again and did the reset zoom and it appears to eliminate the error. Problem solved but I am not sure why I never set up zoom and didn't have the problem on any other site. Will it need to be done each and every time I go into that page or is it now corrected?

  • Screen resolution option only 800x600

    I have a G5 Dual 2.3 and an Acer 1917A monitor. I used this monitor with no issue on a G4 Dual. Plugged it into the "new" G5 and the only screen resolution option I have is 800x600 (not high enough). I have not installed any software from acer (can't find it, and frankly don't know if I ever had any). Any ideas as to what I am missing?

    What's the native resolution, 1280x1024?
    (I can't find info on a 1917A)
    Try another user account.
    If you need to, set up another user account with admin privledges.
    See if the problem persists.
    if not, it is a software problem in your account.
    Might also download the ATI Display Panel, and see if resolution adjustment can be made there:
    http://support.amd.com/us/gpudownload/Pages/atidisplays4-5-7.aspx

  • My screen is only show half of the application what resolution should i use

    My screen is only showing half of the application, what resolutions should I use.
    MacBook Air. December 2010

    It depends on which model you have:
    13" - 1440x900
    11" - 1366x768
    This of course assumes you are talking about your internal display.

  • Screen resolution changed only in the browser after update of version 9.0.1 how do I change it back

    Screen resolution changed only in the browser after update of version 9.0.1 how do I change it back?

    http://kb.mozillazine.org/Screen_resolution_changes_when_launching_application ?

  • 18 month old original i-pad switches on but screen resolution not good and can only just see the icons has the screen gone?

    18 month old original i-pad switches on but screen resolution not good and can only just see the icons has the screen gone?

    No could just make this out and it is up full

  • Screen Resolution Problem (Max. Resolution of only 1024x768)

    Hello,
    I just upgraded my T61 laptop from Windows XP to Windows 7, Everything was fine at first. But one day when I turned on my laptop, I found out that the screen resolution was wrong. It was only 1024x768 (not wide screen). As a result, the screen was on the left, leaving a thick black bar on the right. The given resolutions which I could choose are only 800x600 and 1024x768, no wide screen options. Tried nvidia control panel, it was still the same. Tried to connect to an external monitor (16:9 wide screen), the resolution was, however, perfect (fit the external monitor).
    I already have the newest display driver (nvidia Quadro NVS 140m - downloaded from Lenovo). I even reinstalled the driver and installed the monitor driver provided by Lenovo, but the problem still exists.
    By the way, after I encountered this problem, when I turn on the laptop, there is no more screen showing the ThinkVantage and the Intel logo. There is also no screen for "Starting Windows". It will straight away enter windows logon screen. It means, I have no way to enter BIOS or the recovery tools by pressing the ThinkVantage button at startup. (I cannot see anything!)
    Anyone can please help me?
    Thanks!

    ahboy0207, welcome to the forum,
    you need to install the monitot inf file from here. Scroll down the page for installation instructions.
    As you have installed another OS on your system you will have changed the Master Boot Record, (MBR), which contains the information allowing the ThinkVantage button to work at boot. If you left the recovery partition intact, i.e. didn't format it, it may be possible to repair the MBR in order that you can access it. However, the recovery partition will have the original XP image on it and not your W7.
    You can enter BIOS by pressing F1 at boot.
    Hope this helps
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

Maybe you are looking for