Msi usb mp3 player i/o error

i recently connected my megastick usb mp3 player and windows diaplyed a window that says: the request could not be performed because of an i/o device error. Now i can not store files to my usb mp3 player. How do i fix this problem???

An I / O error often indicates a read/write problem to the device, oftern ocours more on Harddisk dri'ves. Upgrading the firmware to the player should sort this out, otherwise there may be someting else wrong with the player. For example the player cannot read/write to a specific cluster on the harddisk. But as the player is PSS (i think), (Portable Solid State) then this is a bit odd, but could possibly be the same problem as above , not read/writeing to a specifc sector/cluster of the memory.

Similar Messages

Mount usb mp3 player

Having some probs mount my mp3 player.
Dmesg gives this:
usb 1-1: new full speed USB device using uhci_hcd and address 6
usb 1-1: device descriptor read/all, error -71
lsmod gives this:
usb_storage 62272 0
usbserial 25576 0
usbcore 100484 5 usb_storage,ndiswrapper,uhci_hcd,usbserial
ide_core 102864 29 usb_storage,ide_floppy,ide_cd,ide_disk,via82cxxx,
trm290,triflex,slc90e66,sis5513,siimage,serverworks,
sc1200,rz1000,piix,pdc202xx_old,pdc202xx_new,ns87415,
it821x,hpt366,hpt34x,generic,cy82c693,cs5535,cs5530,
cmd64x,atiixp,amd74xx,alim15x3,aec62xx
Any ideas. Thanks in advance.

jaboua wrote:
briancurtin wrote:what is in your fstab file?
That doesn't matter if the kernel reports device problems
I didn't think so either but here it is anyway:
# /etc/fstab: static file system information
# <file> <dir> <type> <options> <dump> <pass>
none /dev/pts devpts defaults 0 0
none /dev/shm tmpfs defaults 0 0
/dev/cdrom /mnt/cd iso9660 ro,user,noauto,unhide 0 0
/dev/dvd /mnt/dvd udf ro,user,noauto,unhide 0 0
/dev/fd0 /mnt/fl vfat user,noauto 0 0
/dev/hda3 / ext3 defaults 0 1
/dev/hda1 /boot ext2 defaults 0 1
/dev/hda2 swap swap defaults 0 0

USB MP3 Player

Recently I buyed a MP3 Player and Arch (with KDE SC) not mount or give access to the device.
lsusb shows this ID: 1234:5678 Unknow
I try to mount the device but it's not working...

ouput:
00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)
Subsystem: ASRock Incorporation Device 2570
Flags: bus master, fast devsel, latency 0
Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:01.0 PCI bridge: Intel Corporation 82865G/PE/P PCI to AGP Controller (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, fast devsel, latency 32
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: ff000000-ff0fffff
Prefetchable memory behind bridge: b7f00000-f7efffff
Kernel modules: shpchp
00:06.0 System peripheral: Intel Corporation 82865G/PE/P Processor to I/O Memory Interface (rev 02)
Flags: fast devsel
Memory at fecf0000 (32-bit, non-prefetchable) [size=4K]
00:1d.0 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: ASRock Incorporation Device 24d0
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at e000 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: ASRock Incorporation Device 24d0
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at e400 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: ASRock Incorporation Device 24d0
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at e800 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.3 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
Subsystem: ASRock Incorporation Device 24d0
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at ec00 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
Subsystem: ASRock Incorporation Device 24d0
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at ff27fc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: ff100000-ff1fffff
Kernel modules: shpchp
00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02)
Flags: bus master, medium devsel, latency 0
Kernel modules: intel-rng, iTCO_wdt
00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: ASRock Incorporation Device 24d0
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at fc00 [size=16]
Memory at 40000000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix
Kernel modules: ata_piix
00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASRock Incorporation Device 24d1
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 18
I/O ports at d400 [size=8]
I/O ports at d000 [size=4]
I/O ports at cc00 [size=8]
I/O ports at c800 [size=4]
I/O ports at c400 [size=16]
Kernel driver in use: ata_piix
Kernel modules: ata_piix
00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
Subsystem: ASRock Incorporation Device 24d0
Flags: medium devsel, IRQ 17
I/O ports at 0400 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
Subsystem: ASRock Incorporation Device 9761
Flags: bus master, medium devsel, latency 0, IRQ 17
I/O ports at d800 [size=256]
I/O ports at dc00 [size=64]
Memory at ff27f800 (32-bit, non-prefetchable) [size=512]
Memory at ff27f400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: snd_intel8x0
Kernel modules: snd-intel8x0
01:00.0 VGA compatible controller: ATI Technologies Inc RV350 AS [Radeon 9550] (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. A9550GE/TD
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 16
Memory at e0000000 (32-bit, prefetchable) [size=256M]
I/O ports at a800 [size=256]
Memory at ff0f0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at ff0c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
Kernel modules: radeonfb, radeon
01:00.1 Display controller: ATI Technologies Inc RV350 AS [Radeon 9550] (Secondary)
Subsystem: ASUSTeK Computer Inc. A9550GE/TD (Secondary)
Flags: bus master, 66MHz, medium devsel, latency 32
Memory at d0000000 (32-bit, prefetchable) [size=256M]
Memory at ff0e0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
02:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: ASRock Incorporation Device 8139
Flags: bus master, medium devsel, latency 32, IRQ 22
I/O ports at b800 [size=256]
Memory at ff1ffc00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: 8139too
Kernel modules: 8139too, 8139cp

MP3 Player causes visual error in Polls

Hello,
I have found the problem with MP3 Player (from Connect Pro Exchange). The Polls have a visual error when MP3 Player is displayed on lobby layout for example. Please see an attachment - screen of Connect Pro webinar. Do you have the same problem?
Petr Zahradnik

Hello,
I have found the problem with MP3 Player (from Connect Pro Exchange). The Polls have a visual error when MP3 Player is displayed on lobby layout for example. Please see an attachment - screen of Connect Pro webinar. Do you have the same problem?
Petr Zahradnik

How do I make bootable USB mp3 player/flash disk?

hi
i have a big problem. less than a month ago i have backed up my computer using the latest version of Norton ghost v10.0. i then burned the data on to a DVD and i kept it safe. today i encountered a problem i could not cess the internet on my laptop, nor uninstall/install a program, nor get access to help and support. therefore i got the backup DVD inserted it into the DVD drive i opened Norton ghost clicked recovery and then clicked recover my computer. i told it where to look for the backup and then started restore but i then ran into an error message which says the below:
cannot complete the restore of recovery point d:\Toshiba ghost image001.v2i
-Error EC8F178F: Cannot complete the restore of recovery point: D:\Toshiba ghost image001.v2i.
--Error EC8F03F1: Cannot open recovery point 'D:\Toshiba ghost image001.v2i'.
---Error EBAB03E9: Internal Application Error: Memory Access Violation c0000005: Application tried to read memory at 034bac3c.
i have another way of restoring the data this is by making a mp3 player or flash disk boot the computer but on the flash disk there will be the operating system. is there any way to make the flash disk bootable.
i would like to know this because if it boots up from the flash disk or mp3 i can then delete the contents on the HDD and restore the data.
and also when trying to restore it says a file or program is using the file its trying to restore.
can somebody help,
regards

Hello Samee
The best way to boot the unit in DOS mode is to use external floppy drive. This drive is not expensive and if your data are so important you can invest a few euros to buy it. Using start disk you will be able to boot into DOS mode and do what you want to do.
I also recommend you to contact Norton and see if they have some simply solution how to install created image.
With mp3 player you will not be able to boot up.

Can any usb mp3 player/phone connect to an ipad?

what i really wanna know is if a windows mobile 6.1 phone or windows compatible mp3 player can connect in any way to an ipad directly?

itoikenza wrote:
what i really wanna know is if a windows mobile 6.1 phone or windows compatible mp3 player can connect in any way to an ipad directly?
No.

USB MP3 Player (MPman f50)

Hi all,
I've downloaded a program to upload MP3's to my MpMan f50, called mplinuxman.
However, when I start it up, it says it can't find my USB mpman. Do I have to do something special to get USB working on my system?
This is what dmesg gives my about USB:
[root@evelien bin]# dmesg | grep -i usb
usbcore: registered new driver usbfs
usbcore: registered new driver hub
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
USB Universal Host Controller Interface driver v2.2
uhci_hcd 0000:00:07.2: Intel Corp. 82371AB/EB/MB PIIX4 USB
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[root@evelien bin]#

Aha, I was using 2.6.9 and the USB module wasn't loaded.
Now for another problem, my USB device does not show up in /dev. Altough it's not a problem, I can access my mp3 mplayer fine with mplinuxman, but only as root.

Using plain old mp3 player with iTunes on Mac

Hi all,
I want to use a plain, old USB MP3 player (mass storage-type) with iTunes on my Mac (OS X 10.4.x). I asked this question over on the Windows iTunes forum at
http://discussions.apple.com/thread.jspa?threadID=1264196&tstart=0
and wondered if there's anything that'll work on the Mac.
In Windows, I basically have resorted to drag-n-drop from the iTunes window to a Windows Explorer window showing the USB MP3 player as a removable drive, or to using iTunes Agent (http://ita.sourceforge.net), which is a Windows-only solution.
What's the solution on Mac OS X?
Thanks,
Matthew

I think a universal "none" is probably a bit presumptuous. If you're able to get music onto the player in Windows via drag and drop, I see no reason why that won't work on the Mac as well, provided that your Mac can recognize the drive. I would imagine it can, as I've never come across a PC formatted drive that my Mac didn't recognize.
There is also a freeware application called XNJB that apparently works as an interface between a Mac and a Creative MP3 player. I haven't used either, so can't vouch for them at all.
Just that like I said, a universal "none" is probably a bit presumptuous.

[Solved] Automount Generic MP3 Player with UTF-8 encoding

Hello, everybody!
Ubuntu refugee here.
So far I'm going fine with Arch, I just have a couple of problems related to my Generic USB Mp3 player:
1) I want HAL to mount the player with UTF-8 encoding. Right now, it shows Arabic characters as ??????.
2) In Ubuntu, it used to recognize the player as an MP3 player, give it a nice icon, and add it as a music source in Rhythmbox. In Arch, on the other hand, the player is mounted as a generic USB flash drive. How can I make Arch recognize it as an MP3 player?
Thanks in advance.
Last edited by farghal (2008-05-10 20:17:09)

GOT IT WORKING!! Yay!
I got the solution from here:
http://blog.pcode.nl/2006/08/24/introdu … io-player/
The trick is to make HAL identify your Digital Audio Player (DAP) by adding a rule to /usr/share/hal/fdi/information/10freedesktop/10-usb-music-players.fdi -- and since, in my case, Ubuntu already had a 10-usb-music-players.fdi file that recognized my player, all I had to do was boot up from an Ubuntu live cd and copy Ubuntu's 10-usb-music-players.fdi over Arch's.
Now my issues with Arch are down to only one: http://bbs.archlinux.org/viewtopic.php?pid=360647
Thanks everybody.
Last edited by farghal (2008-05-10 20:16:49)

Not enough space on my mp3 player but it is empty

not enough space on my mp3 player but it is empty hi
I have Muvo 2.0. usb mp3 player. It has 265 mb.the problem is that there is not enough space on my mp3 player but THERE IS 265 MB FREE SPACE.
I have tried use recovery tool but is still not working.can you help me ,please?

Are you attempting to copy a lot of .mp3 files into the Root Folder?
There is a limit's to the number of files in one folder the MuVo can 'see'.
Just create a few new folders by Album, Artist, Genre or whatever you like and copy the appropriate songs to each folder.

How can I fix 2121 sandbox security error, local swf MP3 player test calls MP3's from website?

1st Issue. I am a new user and am fighting #2121, #2044 & #2048 Flash security errors in getting an MP3 player to work as I test the fla file in Flash CS4 on my local computer. The fla in Flash and swf in Dreamweaver calls mp3 files from our host server on the internet.
After reading various sparce posts and Adobe articles on this issue, I have added a crossdomain.xml file at our websites root (see file below) and added the code, flash.system.Security.allowDomain in line 1 of the action script of the flash fla to allow our site access (-see script below). These efforts have helped get the player to work better on our test site.
But, I am still getting the 2121 error within Flash CS4 as I debug the player or play the swf in live view within Dreamweaver. Playing the fla or swf will lock-up the Flash 10 player and crash the program. I am having the mp3 player access the mp3 files from our web site as I test the fla.
Here is the debug message I am getting:
Attemping to launch and connect to Player using URL C:\Web Site Files\Plank Productions afc\Plank Productions 2010\site\MP3_List_Player_AS3.swf [SWF] C:\Web Site Files\Plank Productions afc\Plank Productions 2010\site\MP3_List_Player_AS3.swf - 209827 bytes after decompression SecurityError: Error #2121: Security sandbox violation: Sound.id3: file:///C/Web%20Site%20Files/Plank%20Productions%20afc/Plank%20Productions%202010/site/MP3%5FList %5FPlayer%5FAS3.swf cannot access . This may be worked around by calling Security.allowDomain.
at flash.media::Sound/get id3()
at com.afcomponents.mp3player::MP3Player/get id3()
at com.afcomponents.mp3player::MP3Player/handleBuffe ring()
Here is the crossdomain xml code:
<?xml version="1.0" encoding="utf-8"?>
<?xml version="1.0"?><!DOCTYPE cross-domain-policySYSTEM "http://www.macromedia.com/xml/dtds/cross-domain- policy.dtd">
<cross-domain-policy>
<allow-access-from domain="www.plankproductions.com" secure="false"/>
<allow-access-from domain="plankproductions.com" secure="false"/>
</cross-domain-policy>
Here is the AS3 in line 1 of the Fla file that I added:
flash.system.Security.allowDomain("www.plankproductions.com", "plankproductions.com");
2nd Issue. The online playback of the mp3 player will play about 4-7 mp3’s then lock-up in Internet Explorer 8 on a pc. I think that is related to flash security, not sure, I do not know how to debug the mp3 player on the web site.
http://plankproductions.com/pptemplate_afc_mp3.shtml
Questions.
-How can I resolve the error 2121?
-What as3 code do I need to target the local c drive to have security clearance and work properly, is this the problem?
-Why is the mp3 player locking up on the web page?
Thank you in advance for any help.
Operating System: Windows XP Professional, CS4 Web Premium

Do you have the standard or debug player installed? Such errors should not occur with the standard player.
See http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html#main_Find_Flash_Play er_version_type_and_capabilities__Flash_developers_only_

Usb not seeing mp3 player? brand new s10!

brand new s10, all ok but neither usb port seeing mp3 player.(sandisk clip) mp3 used on other computers, no problem.

USB port does not see MP3 player. I looked at "support & downloads". Nothing there about USB's.
This is crazy, I have never had to download drivers for a NEW computer to make the USB's work.

MP3 player and USB

I just purchased a ZipLinq . USB cable to use with my MuVo Slim, but it will not work. I'm fairly certain the Slim is backward-compatible with USB ., so I don't understand why. Trying to determine if the cable itself is faulty. I can use the Slim just fine with my larger MacCalley adapter, which has a wider cable, and of course with the cable that it came with.
Has anyone successfully used your MP3 player with a compact, retractable USB . cable?

If the cable is cited as USB it might not be good enough quality (really the whole USB or 2 thing for cables is just a quality issue).

Mp3 player MSI - P200-1000 FM Black

Hallo,
I would like to ask about using rechargeable AAA battery in P200.
What about support of using NIMH battery? Will be battery recharged via USB port while mp3 player be connected to the computer?
Thank's for all answers
Jarda

I just looked through the manual for it and I don't see any support for battery charging by any method. Since it is designed for use with alkaline batteries there would be no charging feature for this device anyway.

Error when trying to controll mp3 player with webService

Hi
I have a system to controll some things in my house, and one of them is my soundsystem. I have a tablet that communicates with an server that do the acctual work.
I found an mp3 player online with the source-code, and I want to controll it using webservices from the client. I stript it an added it to my system. I just want to have buttons on the client, and then the server to do the actual work.
If I don't use WS, just make an object of the player, I can add music to it and play them.
If I do the exact same thing, but it's the WS that gives the commands on the server side I get an ex.
Unable to handle format: mpeglayer3, 22050.0 Hz, 16-bit, Stereo, LittleEndian, Signed, 7000.0 frame rate, FrameSize=32768 bits
Failed to realize: com.sun.media.PlaybackEngine@12b51d4
Error: Unable to realize com.sun.media.PlaybackEngine@12b51d4
I have tryed asking google about the format, and i found somethin about that it hade problems finding the codec. I can se the codec in my JMF Regisrty.
I can find the "com.sun.media.PlaybackEngine" in the jmf.jar thats in my lib.
I have installed jmf 2.1.1e.
Server and client are run from the same pc.
I have tryed from diferent pc, but it dident work.
Anyone?

Glypher wrote:
I have tryed to run it without using web service, and it works perfectHuhh. I actually asked that question, positive that you would reply that it also failed in the desktop app. That is very odd.
Maby the best thing is to move it yes. Can you do it, or tell me how I can do i.I am not so sure now, that that is the best move, since it seems the web service is playing some part in the problem.
I'll leave it to your decision though. If you want it moved, surf on over to the [latest Report Abuse thread|http://forums.sun.com/thread.jspa?threadID=5422989&tstart=0] and ask the mods to move the thread to JMF. Typically that thread is for reporting abuse, but it is also good for getting threads moved, since the community moderators keep an eye on it.

Msi usb mp3 player i/o error

Similar Messages

Maybe you are looking for