Msi VGA, R5670-PMD1G -will it work?

Hey,
i have an older PC with PCI-express X16, rev 1.0a, 400w psu, win-xp, ECS-rx480-A-MB. I know this card is pci-ex 2.1, but i have undestood that it should support the older standard, (or not?? ). When i install the card thear is no video signal, system boots up, vga fan works, but only black screen. I have analog monitor with sub-d adapder. All works with other graphics card. Got no other PC to test in.

Since your MB is a 5 year old model I would suggest you check ECS forums/customer support whether the new card is compatible. If you can't test the card on another rig then there's not much we can do to help you. There's a possibility you need a MB BIOS update to use it. Yes the VGA card should be backwards compatible but not always on some MB's. You could clear CMOS and try again.
What brand and model is your PSU? Amps on +12V rail(s)? What is your old VGA card?
Remove VGA drivers >> DriverCleaner << and then do a fresh install of the new cards drivers.

Similar Messages

Mini DisplayPort to DVI + DVI to VGA Display Adapter, will it work?

Hi,
I have a MBP, and I have just purchased an apple Mini DisplayPort to DVI adapter.
I want to connect it to a VGA port.
Can I buy an Apple DVI to VGA Display Adapter and connect it to the connector above.
Will that work? Any one with experience who could advise me on that?
Thanks.

This does not work, because the Mini DisplayPort to DVI adapter has a DVI-D port that transmits only digital signals. VGA uses analog signals.

MSI P35 Neo2-FR - Will this work??

Hi,
I am planning a new system, after my current one is a little dated. Here is an outline of what I am planning to build: -
CPU - Intel Core2 Quad Q6600 2.4GHz SLACR G0
M/B - MSI P35 Neo2-FR
RAM - Ballistix DDR2 PC2-8500 5-5-5-15 Unbuffered NON-ECC (4x 1GB)
G/C - INNO3D GeForce 7300GT 256MB DDR2 PCI-E
I am not needing it for gaming, but more for production work (Graphic design, Illustration and video editing).
I have a few questions if anyone can answer them for me?
Is the RAID facility on board a hardware RAID or software RAID. Since its provided by the Northbridge I am pressuming its software.
How many SATA ports can be used at any one time. For example, does using the 2x eSATA ports, reduce the amount of on board ports you can use? (Like some USB ports?).
If I wanted to use a SATA DVDRW connected to the southbridge SATA port, would I be able to boot from it?
I can see many people have had problems with installing Vista on this board, can anyone see any compatability issues with my proposed setup?
Many thanks!!!
Phil

Quote from: Hans Gruber on 28-November-07, 19:07:02
The only compatability issue would be with your 7300gt card. That's hardly enough power to run a game let alone graphics editing. You would be much better served with an 8800gt to perform video editing.
Hi Hans, the 7300 is the same card used in the Mac G5's used in my place of employment for graphic design / video editing. Although some have the 8800GT as well, this is the card used in the majority of the machines. I am sure it will be ok but you reassured one of my existing concerns. I can always upgrade this if it doesnt cut the grain!
Thankyou!!!
Quote from: Maesus on 28-November-07, 19:33:33
Please spend some time to read the moan guide if you haven't.
Yeah not much on there with regards to my post. Cheers but I did read it before I posted.
Quote from: Maesus on 28-November-07, 19:33:33
0. All of your answers are here: http://global.msi.com.tw/index.php?func=proddesc&prod_no=1261&maincat_no=1&cat2_no=170 you just need to read line by line and you shouldn't miss the answers.
was already a bookmark in my browser as I have been researching it for a while now. Just wanted clarification on a few things hence my post.
Quote from: Maesus on 28-November-07, 19:33:33
1. It's ICH9 RAID. It's southbridge, not northbridge. It's hardware RAID.
ICH9 provides a RAID facility is software RAID using Intel Matrix Storage Manager. The CPU processes the parity for RAID 5.
Quote from: Maesus on 28-November-07, 19:33:33
2. you can max up the SATA ports. How many is on this board? 6 SATA ports? you can use them all.
There are 2x eSATA ports (I am pressuming from the ICH9), and 4x SATA on the ICH9, and 1x SATA on the 88SE6111. What I was trying to ask is do the 2x eSATA ports render 2 of the ICH9 ports unavailable?
Quote from: Maesus on 28-November-07, 19:33:33
2a. USB ports does NOT reduce the total amount of USB ports to use, where did you get that info or having that impression??
I worded this completely wrong. My bad..... I have had motherboards before where if you connect a usb back plane to the USB header on the main board, it simply stops you using some of the USB's on the rear panel. This is simply like a redirect to allow you to plug USB devices in to the front of your PC case instead of reaching around the back for it rather than allowing you to add additional ports. This is what I was trying to ask, If I am to use the 2x eSATA ports does that mean that it renders 2x of my onboard SATA ports obselete.
Quote from: Maesus on 28-November-07, 19:33:33
3. Yes
Thankyou
Quote from: Maesus on 28-November-07, 19:33:33
4. it's not really compatibility issue, but more of Vista's own issue, just that you need to do the right step to get Vista installed. Quad Core + 4GB, well, microsoft acknowledge the Vista installation issues with this config. You will need Vista 64-bit, but start installing with 1GB or 2GB. After completing installation, install microsoft quad core and 4GB patches, then only plug in the remaining 2GB.
Thankyou

Cannot update graphics card BIOS, MSI Live upate 6 will not work.

Live update 6 does not support "MSI Radeon R9 280x Gaming 6G" graphics card.
Live update 6 does not run.
Even tried mass loading Live update 6 to the point it had 800+ "Live Update.exe 32*" processors running in task manager and they soon disappeared 20 seconds later.
No UI.
No Error message.
If the program is not running it is clear it does not support any of the hardware in my system including "MSI Radeon R9 280x Gaming 6G".
As a result I cannot update to latest BIOS for my graphics card.
Operating system: Windows 7 64bit (last update 05/09/2014 6 days ago)
CPU: AMD A8-6600k APU @ 4.60GHz
RAM: 8GB Dual channel Crucial Ballistix Tactical Tracer DDR3 1866MHz CL9
Motherboard: Asrock FM2A88M Extreme4+
GPU: MSI Radeon R9 280x Gaming 6G
GPU details:
Am I required to have an MSI motherboard to be eligible for a graphics card BIOS update?
The reason why I seek this is because the entire line of R9 200 series graphics cards are plagued with screen flickering due to ULPS. BIOS updates for other vendors of the card; "Gigabyte", "Asus" etc have been reported to fix the monitor flicking ULPS causes however since I have an MSI GFX card I cannot use Gigabyte and Asus BIOS updates.
I no longer have the flickering issue due disabling ULPS and overclocking the graphics card however it's causing the card to operate at a constant 48 degrees and chew power.
With the overclock values and stress testing it with Unigine Heaven Benchmark 4.0 (extreme preset) the card reaches a max of 74 degrees over the course of stress testing for 4 hours.
But I would like to be able to have my card at factory clock settings with ULPS without the flickering and I'm wanting to see if the staff at MSI are fully aware of the bug in their product line and if the latest BIOS version for the graphics card would fix the issue.

No but live update is flakey at best and i wouldn't trust it.... (seen far to many problems with it)
if you want a Updated VBIOS if one is available please supply these 2 things and then one of the other mods will be able to get you what is needed!
1: Serial number of your card (leave off the last 3 digits and then there is no unique information about your card as the rest is all just manufacture data to all the cards from that batch)
2: click the little icon to the side of your BIOS version number and save a copy of the VBIOS to a file and uplaod it to somewhere and give us a link to the file... (use somewhere like Dropbox)
once we have those 2 pieces of information someone here will be able to get one if Available for your card

MSI X48C Platinum and DDR3 corsair 2x4 GB @ 1600mhz WILL IT WORK??

Hi , I truly appreciate the mere existence of this forum .
my system is :
PSU : Corsair 650HX
CPU : Intel Core2Duo E6750
GPU : Geforce GTX 260
RAM : (currently 2x1gig DDR2 @ 667 Mhz)
and
i just bought 2x4gb dims of DDR3 ram (corsair vengeance)
it doesn't work ( i believe it's because it maxes out at 8 gigs so it won't support 4gig dims?? just a guess)
my question is this :
if i change the memory for four 2gig dims , at the same frequency (1600 mhz , ddr3 ) will it work without the need for tweaking ,
or at least a minimal quantity of the whole tweaking-ness?
i'm only asking because time is of the essense ( i really need the pc working )
and if there is no chance of this combination working, would 4x2 gigs at 1333 Mhz work ??
also , since i don't believe i have ever updated the mobo's bios , should i do that? ( and which is the safest way to do it??)
and just out of curiosity , what is the fastest memory that this mobo can support at 8 gigs without any stability problems whatsoever ??

Your board and the chipset do support DDR3-1600. The memory you are mentioning is not on the support list.
The board's support states Quote
Supports four unbuffered DIMM of 1.5 Volt DDR3 800/1066/1333/1600 DRAM, 8GB Max
Thus you need 2GB modules to get to 8GB if that is what you need/want.
See here for the supported memory modules http://eu.msi.com/file/test_report/TR10_1393.pdf
You will see that no DDR-1600 2gb module is even on that list. Only 1GB 1600 modules were tested.
If you want to use 2GB modules then get yourself 1333 modules. The performance difference is minimal and you should have good stability with these modules.

Need tech help for MSI VGA Fan controller for gtx 780 SLI

Just curios how to get the VGA Fan controller to work on the 2nd card that's in SLI? I can get the 2 fans to run 100% with afterburner but the middle one wont on the 2nd card? Thanks!

I have the same problem.
On GTX 780 Lightning, Afterburner will control both cards 90mm fans. Afterburner will not control the middle fan (fan 2).
The MSI fan controller will only control one card, not both. I think there was a major oversight here. They either weren't thinking anyone would SLi GTX 780 Lightning when they made the fan controller or its horribly broken. In my case Rakunvar, my bottom card (PCI-E slot 5) is controlled while the top card (PCI-E slot 2) is ignored.
I heard somewhere, they plan to fix Afterburner so it will correctly work with the 780 lightning. It seems to me they put the MSI fan controller in the box with the GTX 780 Lightning because they must've known that the current beta Afterburner wouldn't control the middle fan.

Will it work with Windows NT

Will this work on Windows NT. Judgeing by the JS2E runtime documentation it doesn't look like it will. Is this right?
Is there are way to install this - I tried and it failed on a strange error.

Correct; MSI Taiwan have confirmed that PC54G2 will NOT work with NT

If I buy mini, will it work with my Pioneer 436HD?

I've spent a good deal of time searching through past posts and help databases, but I can't seem to figure out the answer.
Does anyone know if a mini will work with my Pioneer plasma 43 inch TV. model 436HD? It has an HDMI port (which is being used by my dvd player) and a computer plug which I think is described as a VGA plug.
I was hoping to play the tv shows I downloaded from iTunes, surf the web, do web cams and edit photos and movies.
Thanks for any advice.

It will likely work at some level. Whether it works perfectly and meets your expectations is best answered if you can find someone else that has paired the two devices and confirmed they work. But it looks like you have tried this.
There are two problems commonly encountered. One is overscan where the edges of the Mac desktop don't show on the screen. This is a big problem because it affects the menu bar and the dock. The other common problem is non-square pixels on most plasma screens.
Is there any way for you to try this before you purchase? Or will a retailer let you return the mini if it doesn't work?

Help - MSI VGA Monitor Warning Message

Hello Friends,
Sorry by my English. I am a spanish user.
I buy a Geforce 4 Ti 4200 Agp8x.
I installed "MSI VGA Monitor Warning Message" but it give me this error message:
Fan speed is unusual
Now fan speed is : 1670 Rpm
Memory voltage is unusual
Now memory voltage is : 3.34 Volt 8b
I have a mb "Asus tuv4x (bios 1.005beta)" with a PentiumIII 1000. I have not installed the msi drivers. I have installed the 43.45 reference nvidia drives.
¿What is that error? ¿the vga or the mb is bad?.
Thanks by your help.

Thanks by your reply.
Yes. I loaded 4.47 Via 4in1.
I am running "MSI 3D turbo experience". When I run this sift it open a internet explorer window with a error for a file ".ocx" and after it give the error message about speed fan et voltage.
I read some post that say that this soft dont work well in xp. I have xp.
Now I installed the last version of "3D turbe experience" from web of msi (2,13) and y have lowed the security for the "active x" in the security tab of tools of internet explorer.
Now I have not the error message and the "3D turbo experience" internet explorer page load but it dont give the the speed fan.
Thanks friend.

MSI eclipse + corsair 1600 MHz wont work Cant get it running at that normal spe

-Moederboard -MSI eclipse .Bios versie 1.1
-Geheugen : Corsair TWIN3X 1600MHz DDR3, 6GB, 9 9 9 24 ?
-Videokaart :geforce 7600 GT XXX (yes I know oldie didnt have the money for a new GFX CARD )
-Tagan 2-Force II Series 800W, ATX12V
-HD Veliciraptor 300 gb
Made some pics from the Bios
http://members.home.nl/darkreva/pc/Afbeelding416.jpg
Like you can see the adjusted Dram frequen is on 1600 mhz but the current speed is 1066 and after reboot it stays there
The memory I bought its working Voltage is 1.65 Volts but the mainboards says that it can damage the cpu if I set it at 1.65 volts so its still on AUTO (1.5v)
But like this the memory will never work at 1600 Mhz..
http://members.home.nl/darkreva/pc/Afbeelding417.jpg
Thnx.. for replying

Nice sales :
http://global.msi.com.tw/index.php?func=proddesc&prod_no=1695&maincat_no=1&cat2_no=170&cat3_no=645
DD3 1600
I cant download the bios from the site..
http://global.msi.com.tw/index.php?func=downloaddetail&type=bios&maincat_no=1&prod_no=1695
and I dont want to Liveupdate (update bios threw the internet Yeah right) lol
LOL.. and the BIOS hangs when I try to save my "old bios" to my 4 GB scandisc ..this is getn lamer by the second
First time it just reboted when I pushed enter on the option :Save file to the selected device {usb MY DRIVE}
Second time.. lol It just hanged..
third time :Cant find folder to start saving the file when I tried to back it up..
p.s Is it save for me to bios update threw the internet? :P
Stop trying to skirt the language filters
>>Please read and comply with the Forum Rules.<<
-- Frankenputer

MSI Z87 GD65 Mechanical keyboard not working!!

My computer is less than a month old and I've had this problem ever since every few days ill boot up and my mechanical keyboard will get the usb port has failed to reset error in windows, sometimes it will start working on its own but idk what to do about it please help!

okay so its a max keyboard nighthawk x7 and it works perfectly fine on my laptop and my friends desktop/laptop, i use msi fastboot so i cant get into the bios with the keyboard, my logitech wireless mouse keyboard combo work fine but this keyboard doesnt its very frustrating

G4-450 DP with a 22 inch clear Cinema display will not work, please advise

Hello all
I can not seem to get a G4-450 DP to work with a 22 inch clear Cinema display, i even have one of those dr.botts wich i normaly run a 2nd 15" clear display.
What happens is that it starts up and then goes black,
can anyone advise?

Hi-
Could you check your system profiler for graphics, and post the model of the card that you have? The stock card is the Rage 128 with the following specs:
-ATI RAGE 128 Pro graphics card with 16MB of SDRAM graphics memory installed in a dedicated AGP 2X graphics slot
-Support for up to 1920– by 1200–pixel resolution at 32 bits per pixel (millions of colors)
-Apple Display Connector (ADC); carries analog and digital video, USB, and power
-15–pin mini D–Sub VGA connector
You say you have a DVI port (along with ADC) so, I want to clarify the card model.
You also state that the display worked once- in what configuration? Connected alone? Through the Dr. Bott's DVIator? That means from the DVI port to an ADC connector on the screen (but the 22" is a DVI connection)?
I found the following quote on the Dr. Bott's page:
However, the ATI Rage 128 card will not work with the 20", the 22" and the 23" Cinema Displays
To clear up confusion (mine), please carefully check your profiler, compare the ports of your card to the Display compatibility link (in above post), and let me know the results (what you have), along with a description of what connects to what. A model number for the display would also help.
Generally speaking, when a display goes black after the gray screen, the graphics card isn't compatible, or the necessary software/drivers are not installed.
G4AGP(450)Sawtooth, 2ghz PowerLogix, 2gbRAM, 300gbSATA+160gbATA, ATI Radeon 9800 Mac OS X (10.4.8) Pioneer DVR-109, ExtHD 160gb x2, 23"Cinema Display, Ratoc USB2.0, Nikon Coolscan

ADOBE CLOUD ON MY DESKTOP WILL NOT WORK. IT LOADS UP BUT NOTHING FILLS THE WINDOW

ADOBE CLOUD ON MY DESKTOP WILL NOT WORK. IT LOADS UP BUT NOTHING FILLS THE WINDOW

BLANK Cloud Screen http://forums.adobe.com/message/5484303 may help
-and step by step http://forums.adobe.com/thread/1440508?tstart=0
-and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html

Apple DVI to Video Adapter on PC???? WILL IT WORK?

Will the Apple DVI to Video Adapter work on PC's as well as Apple? I own a mac but the computer I need to convert on is an older PC with a DVI port on back. Will it work? It's just an adaptor right? It cn't be built to ONLY work on mac...theres no software in that little thing.
HELP!!! before I buy

No, it won't work with a PC. It requires the video card support the adapter, and since it was made for Apple cards, chances are the PC one won't. You might be lucky, but I doubt it.

YouTube will not work on safari for me on the ipad. Is there anyway to fix this? I can go anywhere else on the internet fine and it works on google chrome, but on safari it shows a blank screen with the bar on top after it loads.

YouTube will not work on safari for me on the ipad. Is there anyway to fix this? I can go anywhere else on the internet fine and it works on google chrome, but on safari it shows a blank screen with the bar on top after it loads, if it's even loading at all.
I do not know if it's relevant or not, but I got a message on my ipad while on safari saying that my iPhone has a virus. I looked it up and it seems it might have just been an ad from the website I was on, but it happened around the same time YouTube stopped working.

You will find that using the YouTube app will provide a better viewing experience for YouTube videos.

Msi VGA, R5670-PMD1G -will it work?

Similar Messages

Maybe you are looking for