Msi video card n240gt and n9800gt problems with output HDMI

Hello to all
I have a problem I just bought a new Video card because I needed HDMI output. The previous card I have is a BFG Ge Force 8800GT 512 DDR2 running @ 1920x1080p 60Hz which works perfectly the only downside is it does not have HDMI out with 5.1. Now i installed the n240GT 512 DDR5 and tried watching BD ripped to the HDD and playing them back all i get now it jerking lagging bad also and have horizontal red and green lines scattered across the screen.Which i did not have with my 8800GT card thinking its a bad card so i bought another card from another dealer this time its a MSI N9800GT 1gig DDR3 and still the same problem.I Checked the resolution and its set to 1920x1080P refresh at 60Hz,i also changed the Hz to 24Hz and it cleaned up the lines but not all and picture still jerky picture. I have a MSI K9N NEO V3 Motherboard and all drivers updated current Bios. l used a DVI cable 40ft long with my Ge Force 8800GT and every thing worked fine, once I installed the new MSI Video cards N240gt and N9800GT I have the above problems and using a 50FT HDMI cable. I have a Samsung PN50A550 with 3 HDMI inputs 1 has my BluRay player hooked up with HDMI running at 1920x1080P at 60Hz and crystal clear picture no problems, input 2 has my HD Bell receiver running at same specs as input 1 no problems I tried the other HDMI inputs from the Samsung TV from the HDMI out from the card same thing. It has to be the cards that can`t support the TV what else can it be if not the MSI cards. Please respond ASAP Thanks Thumpalong

http://www.overclock.net/t/936561/psu-rating
You may want to borrow and test with another PSU.
We always recommend Corsair and Seasonic
I can't find anything on Topower other than that opinion piece of linked... getting frustrated. Most of the time I can find detailed info on most psu's not this time, so best to borrow and test.
Assuming of course that the older VGA's worked fine.

Similar Messages

Pixelated video and upscaling problems with ringing artifacts on Youtube since Flash player 10.3

Pixelated video and upscaling problems with ringing artifacts on Youtube since Flash player 10.3. Flash palyer 10.2 was the last version without the listed problems.
For anyone interested you may see here what 'ringing artifacts' means : http://en.wikipedia.org/wiki/Ringing_artifact
More about Image artifacts/errors related to video scaling here : http://en.wikipedia.org/wiki/Video_scaler
Test configuration :
Windows 7 x64
Intel HD Graphics with lastest available drivers from manufacturer.
Any solution from Adobe?

Could you please open a new bug report on this over at bugbase.adobe.com? Please post back with the URL so that others affected can add their comments and votes.
Thanks,
Chris

MOVED: MSI Video Card

This topic has been moved to VGA products.
MSI Video Card

Please read and comply with the Forum Rules.
this is a user-to-user forum. no-one from MSI visits here.
maybe you will get better help if you give full details of your PC system, and try to explain in more detail your problem
PS you've also posted in the wrong forum, this one is for MSI's TV tuner cards. i'll move it to the right area.

Could not complete the Render Video command because of a problem with Adobe Media Encoder.

So initially, my problem was solved, but it stopped working again. Same issue. I tried installing the media encoder app, but no luck please help!
Here's the original post:
Hello, I'm running a macbook pro retina, and previously I was able to render video with no issue, and now this is popping up. I've tried deleting and reinstalling photoshop, but it was not helpful. I would very much appreciate any help or guidance. Thanks!
Here's the error message I get:
Could not complete the Render Video command because of a problem with Adobe Media Encoder.
Here's the original thread: Could not complete the Render Video command because of a problem with Adobe Media Encoder.

Have you tried re-installing Photoshop?
Benjamin

Mail and iPhoto Problems with sending photos.

Mail and iPhoto Problems with sending photos.
I have this problem that started a while ago and seems to be getting worse.
Here are the different scenarios.
-If I try to share a photo to email within iPhoto, it will insert the image file name in the mail message, but no image icon or opened image. In iPhoto Preferences under General I have chosen to use Email Photos using Mail.
-If I choose to use iPhoto to send the photo, it will compose the message and the photo is viewable. If I send the message i can view the photo within the email I sent to myself. Nothing happens when I double click on the photo in the Mail message. Nothing happens when i control click on the photo in the mail message. Nothing happens when I try to drag the photo to the desktop from the mail message. When I try to save attachments from the email and choose a place to save it, the save button is grayed out and it cannot be saved. When I check the mail message it says there is an attachemnt but there is no file size listed.
-If I use the stationary within Mail app I cannot drag a photo into the placeholder, I get a circle with a line through it symbol when I try. It happens if I try to drag a photo from the desktop or from the media browser within Mail app.
-If I drag the photo to the desktop from iPhoto, I can double click it on the desktop and it will open in Preview.
-If I then control click on the same photo on the desktop and scroll to share/email, the generic photo icon will be inserted in the mail message. If i double click the photo icon in the mail message I get a message it can't be opened because it is empty.
-If I drag that same image to the mail message body the same thing happens.
-If I send that email to someone they cannot open the image file.
What I can do:
- I can drag that same image file on the desktop to my dropbox folder and it will upload. From there I can go on my iPad and download the photo and send it through email just fine.
-I can open the same image file on my desktop in Preview, I can copy and paste it into a mail message and the image will be viewable in the mail message by me and by the recipient.
-I can drag that same image on the desktop to my safari browser window and it will be viewable in the page. i can then copy and paste that image into a mail message and it is viewable in the message. I can then send that email message to myself and i can control click on the image and get all my options. It also shows as an attachment with the size of the image file in the mail message.
I can send that message to someone and they can see the photo and open it fine.
-If I send that same email to me I can see the photo within the mail. If I then drag that photo to the desktop I cannot use it again to put in an email as the same problem happens again.
I have tried all scenarios in my user account, another users account and in a guest account. The same happens in all. I am guessing because of this it is not a corrupt preference file, unless all of the preference files are corrupt. The guest user account I added a new email account so it was brand new and still had the problem.
I am stumped, all and any help is appreciated.

Another problem that may be related….
I have Snapz Pro. I used to be able to save the snaps to my desktop or a folder. Now when I take a screenshot and try to save the file to my desktop or a folder on my desktop I get this message "Files cannot be created in the selected location. You do not have permission to write to the selected location. Please choose a different location." I have found that i can only save the file to the clipboard. I have repaired permissions many times and still I have this problem.

I have bought Adobe Photoshop Elements 10 last August 2013 and having problems with installing it on Windows 8.1?

I have bought Adobe Photoshop Elements 10 last August 2013 and having problems with installing it on Windows 8.1. Why am I having this problem?

You can check you Adobe account online to see if the serial number is registered under your account. If not then your only option will likely be to contact Adobe Support directly thru chat to see if they can provide you with a/the serial number. For them to do so will require you being able to prove ownership.
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

I have Iphoon 4 and ihave problem with speaker what i have to do?

I have Iphoon 4 and ihave problem with speaker what i have to do?My problem is no body can heir me.
I have got my IPhoon from London U.K. Now i'm in Saudia Arabia

If it's happening on all the apps that you've downloaded from the App Store, but not the Apple built-in ones, then try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted.
If it's happening on all apps then try closing them all completely and then see if they work when you re-open them : from the home screen (i.e.not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

I have ipad 2 and facing problem with programs swtching off

I have ipad 2 and facing problem with programs it's swtching off while working and turn to home page. Am using ios 5

If it's happening on all the apps that you've downloaded from the App Store, but not the Apple built-in ones, then try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted.
If it's happening on all apps then try closing them all completely and then see if they work when you re-open them : from the home screen (i.e.not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

What is a video card? And what requirements do you need to have the newest version of iMovie?

What is a video card? And what requirements do you need to have the newest version of iMovie?

http://en.wikipedia.org/wiki/Video_card
http://support.apple.com/kb/ht5842 Maverick requirements.

Need UEFI Bios for my MSI Video Card R9 290 4GD5

Hello Need a UEFI Bios for my MSI Video Card R9 290 4GD5
S/N:912-V803-844B1310000906-249
Thanks you.

its some generic card, don't have info about it
have ask msi here about it: >>How to contact MSI.<<

I have an iMac OS X 10.6.8 and have problems with the backup Disk for Time Machine disconnecting itself with the message that I ejected it improperly.. It ejected itself - why?

I have an iMac OS X 10.6.8 and have problems with the backup drive to Time Machine ejecting itself and so does not automatically backup the way it is meant to do. It is connected with an USB cable to my iMac. What could cause this - malfuntioning drive?

The "iLife" apps are not part of any Mac operating system install and are a separate purchase.
Once you get past 10.6.6 you can purchase and download iPhoto, GarageBand and iMovie. iWeb and iDVD have been discontinued.
Snow Leopard 10.6.6 and higher include the App Store application which is what you use to purchase Lion.

Just purchased Wndows Vista and having problems with the port for Palm 125

I just purchased a Windows Vista computer and having problems with getting my Palm 125 to sync with the desktop. I get an error message saying: "Com1 not available" What do I do?
Thanks,
Frustrated
Post relates to: Palm m125
This question was solved.
View Solution.

Sorry, that didn't work. I get no drop down menu from the Hot Sync Manager for the Serial Port. What comes up often is: "The selected port, COM1, is not available at this time. Hot Sync Manager will open the port when it becomes available."
Could it be the Norton Antivirus Firewall that is preventing the Hot Sync Manager to open the Serial Port? Just a thought. Thanks for your help.
Post relates to: Palm m125

Scanner and fax problems with the Officejet 7410 AIO

Hi
I have Windows 7 SP1 Ultimate 64 bit and I installed the basic drivers for the network of the Officejet 7410 AIO printer and I checked that all its functions worked properly.
Now, the functionality of the scanner and fax do not work more as in the "Devices and Printers" not appear more their relative icons. How come? How do I install them manually?
Thanks
Bye
balubeto

Hi balubeto,
Welcome to the HP Forums!
I see that you are having scanning, and faxing problems with your HP Officejet 7410 on Windows 7 SP1.
I would recommend the following:
Run the HP Print and Scan Doctor, to diagnose the issue.
Uninstall the software. Uninstalling the Printer Software.
Re-install the software using the HP Printer Install Wizard for Windows.
Hope this helps, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

MacBook will not start. I have restarted with original CD. I have used Utilities and "no problem" with hard drive. I have reset PRAM. I have tried safe boot. Nothing is work. Gray screen with Apple logo and rotating wheel. Thanks for any suggestions!

MacBook will not start. I have restarted with original CD. I have used Utilities and "no problem" with hard drive. I have reset PRAM. I have tried safe boot. Nothing is work. Gray screen with Apple logo and rotating wheel. Thanks for any suggestions!

Snow Leopard is a Mac OS X version. You say that it's the version you have in your Mac (10.6.8). Do a back up of your files, format the hard drive (using Disk Utility) and reinstall again

My mac mini only shows a steady power light and fan noise when powered up. No video or sound and no commumication with wired keyboard or optical mouse. Tried replacing internal battery and resetting PMU/SMC but nothing seemed to happen. Any suggestions?

My mac mini only shows a steady power light and fan noise when powered up. No video or sound and no commumication with wired keyboard or optical mouse. Tried replacing internal battery and resetting PMU/SMC but nothing seemed to happen. Any suggestions? Many thanks! Richard

You've already done the two things I would have suggested.
If your Mini has an internal battery then I assume it's a G4. That means you've gotten a lot of good years of service from it, and it's old enough that it's certainly not covered by AppleCare anymore, and it's probably not worth spending money trying to repair it.
You should be able to tear it apart using instructions from ifixit.com to get the hard drive out, and then put the hard drive into a nice USB or FireWire enclosure (I like the ones from Other World Computing, macsales.com) so you can transfer your data to a replacement Mac.
I hope someone has another suggestion for you.

Msi video card n240gt and n9800gt problems with output HDMI

Similar Messages

Maybe you are looking for