MSI VOX TV TUNER USB

Can anybody help me with VOX MSI USB TV tuner CD key. i need it because i have lost my CD and now i have a new laptop so i need to reinstall the drivers
i have the driver from the internet but i need the key that is provided with the CD

at the top of this forum, there are Important Topics, known as 'Sticky Topics' or 'stickies'
if you look in the Read Me First for TV@nywhere Master, and then look in the FAQ link, you will find a whole load of useful help for TV@nywhere Master, and all of the info regarding MSIPVS will also apply to the Vox USB, as the software is the same
Quote
"I've lost my CDs and MSIPVS needs a serial number to install!"
MSI in their wisdom printed the serial key for MSIPVS on the actual CD. This serial key is the same printed on EVERY CD. Which kind of defeats the object in my humble opinion. Anyways, the answer can be found in this post: MSIPVS requires serial number!

Similar Messages

MSI VOX TV Tuner USB 2.0 - POWER ADAPTER WHERE TO BUY!

I purchased a generic power adapter from radioshak.
it works perfect to power the msivox box.
It has selectable volts on it. 3, 4.5, 6, 7.5, 9, and 12
2A
I have it set to 4.5 volts, as 6 is to much and 3 is not enough.
you might be able to find something with more options on it.
The beauty with this thing is that you can purchase ANY
end you want, and it just happens that radioshak
also carries an end that fits the MSI vox.
The end is classified as "A" size.
When you plug the end into the power adapter,
make sure that you align the word TIP (on the p.a. cord) with the (-)negative side of the size "A" end you bought
The cost was around $1.50 for the end
and $20 for the adapter, however, I had it before I bought the msivox. lucky me!
There is a slight humming noise if I push the size A end to far into the msivox, I assume this creates
some sort of interference, so to eleviate the noise, I just slowly remove the end until the noise stops,
but before the unit loses power from loss of contact.
hope this helps.
-cope

A generic adapter should work just fine although you may need to install drivers for it.
Incidentally the new 2nd gen X1 Carbon uses a proprietary connector, not USB. You can buy a replacement for it from Lenovo or less expensively by googling on the FRU number and buying from an independent seller. The advantage of using the proprietary adapter rather than a generic USB adapter is that it saves the USB ports for other uses.
Cheers... Dorian Hausman
X1C2, TPT2, T430s, SL500, X61s, T60p, A21p, 770, 760ED... 5160, 5150... S360/30

[Vox] MSI VOX TV BOX USB 2.0 problem with audio drivers compatibility

Ok,let's go...
I have a DELL Latitude d510 laptop with a centrino 1.73 GHz procesor and a soundcard supported by Sigmatel software Sigmatel C-Major audio.I bought MSI VOX TV BOX USB 2.0 and tried to install it on my lap top.Yes,I had problems with SP2 on my XP and the MSIVPS software from the instalation CD was crashing every time I tried to start it,but I solved those problems by downloading the latest drivers and the 3.xx version of MSIPVS.But...I still have a problem with audio.To be precise it seems that my audio drivers are incompatible with the VOX drivers.So now I have video but I don't have audio.Also I installed the tv card on my desktop machine and it worked like a charm(everything workes:audio,video,the old MSIPVS which I like better than the new one cause it supports my remote,has better way of managing scanned channels,e.t.c ,but I have USB 1.1 on my MB so the image quality is very poor).I did a lot of experimenting,for example i uninstaled my audio drivers(that Sigmatel C-Major thing),and installed the old MSIVPS and guess what...IT WORKED but there is no use from this cause I don't have audio On the other hand if I have everything installed then in the MSIVPS (the 3.xx version not the old one) under audio I get CD Player as an input audio device(what happened with microphone...?).To cut the long story short I tried a bunch of things and still no audio.Is there any other case of DELL audio software-VOX incompatibility?Any ideas,or solutions?

thank you for answering me. y have no pci card working, only usb 2.0 and sata devices. also, the MSI geforce 9600gt PExp 2.0 gpu. the only usb 2.0 devices which work, are the flash (pen) drives, keyboard and mouse. but no way that the WLAn adapter and TVcapture, both usb 2.0 work.i've tested them front side and rear side and is the same failure: if i use a pendrive, works ok. if i insert the wlan or the tv capture stop work as the 2.0 and a advertising window tell me to change to a 2.0 port, means the ports are working slower, at 1.1. i still have the other PC, built on the MSI K9N4-slif mobo, tested them and both devices work at perfection. i have 2 screenshots to show you:
this, is the device manager (sorry, in spanish but you understand that's about the nVIDIA EHCI USB 2.0 controller. the 2nd one seems to be more sensitive (works worth) then the first one. when the tvcapture begin work, then fails, i'm trying to update this controller, does it ok but then the devicemanager-window freeze. i must stroke the "enter" key to "accept" / finish the update. then, fails again:
the other one is from everest corporate edition:
both drivers marked with purple colour!
i think i should update this Win XP drivers, but how? the usbport.inf file (C:\Windows\inf) don't change anything. i don't want to switch xp to vista, i'm happy whit it.
i'm thinking also on another possibility: could be an energy failure? some usb devices, like the big usb flash dives. 250-320gb, fail because the 5v/usb are receiving it's not enough. could be, but that means this mobo has no solution and i'll loose my money.
thank you very much and i'll stay alert of your suggestions. by

MSI VOX TV Tuner

Ok ppl heres the story
Ive just ordered the vox tv tuner and ive then decided to research it, and what ive found out is ive made a big mistake lol, i basicaly was posting to find out if anyone has got this tv tuner working in the uk?
Thanx Baka!

I've had one of these for some time.
I bought it to use with an Acer laptop (AMD 64 3000+, 512mb, dedicated 64meg ATI 9200 graphics, XP Home SP1).
The device does work, but not very well.
Problems:
As recorded by other users this device always defaults to NTSC whatever video format you try to set it to. A pain in the arse. To make it work you need to reset at each restart. For the UK make sure you reset to PAL-I.
Remote function is poor, tends to jump channels or go to unbroadcast channels for no apparent reason. This is probably down to a software problem.
There were some acknowledged problems with the interVideo software and some versions of windows, updates were available last time I looked but that was a while ago.
I also had a problem with the picture jumping occaisionaly. I put this down to incompatibility with the processors/OS's power saving modes. I tried using external power supply via a powered USB hub but this does not solve the problem.
The external power supply as advertised as 'optional' is not available from MSI suppliers in the UK.
As this device was cheap and support non-exsistant, I've consigned it to the corner of a dark cupboard.
Good luck, and let us know if you can work out the answers
Regards
Grumpy One

MSI VOX audio problems

I have window 7 x64 bit and the software is not compatible, however I did find an alternative software program that works perfectly except there is no sound transferance from the audio (RCA) input to the usb out to the computer. The video is excellent however.
I'm using the built in audio of my Asus P6T. Viewing the window 7 mixer shows no audio playback from the unit.
I'm using native drivers that Windows 7 has incorporated but I also tried the drivers from msi using compatibility mode/admin function.
Any other ideas?
Thank you.
MSI VOX TV BOX USB 2.0

Yup, it works.
If anyone wants to use it as a capture device with windows 7 x64, then let windows 7 use default drivers and install a free program called Golden Videos : http://www.nchsoftware.com/goldenvideos/index.html
No tuner though but that's ok;)
BTW, do you really need the transformer for power or is the USB power source adequate?
Thanks again!

[Vox] MSI VOX TV Box doesn't work

Hi,
I hope somebody here can help.
I loaded up the drivers from the CD that came with my MSI VOX TV Box USB 2.0 and nothing is happening. I also tried the drivers and software from MSI's website.
When I load up the hardware driver, I get an error message saying the driver doesn't pass the Windows Logo test. If I continue with the installation, my computer recognizes the card, but I can't do anything with it. The software that came with the VOX (it came with Intervideo MSIPVS 3) doesn't load up. The WINDVR.exe program shows up in the processes when I click on CNTL-ALT-DELETE, but the program doesn't do anything on my computer.
I am running Windows XP Media Center on my laptop.
Please let me know if you can help or if I need to provide any other info.
Thanks.

Hi,
Thanks for replying.
I am running Windows XP MCE version 2002 service pack 2.
Dell Inspiron 6000
Intel Pentium M 1.60GHz
797MHz, 512 RAM
60GB hard drive
I am using the power adapter that came with the Vox. I used it with the power supply as well as just with the USB 2.0 cable.
Please let me know what other information I should provide.
Thanks.

MSI Vox USB TV Tuner - read this first!

MSI Product support page
Welcome to the forum! If you are looking for help with your Vox USB tuner, this is a good place to start before posting. Look through the stickies below, and make good use of the button, as your question may have already been answered before.
Can't find an answer? Then start a new topic of your own, don't just hijack someone elses. Give as much information as you can, look in the Suggestions on posting and getting better answers for advice. Make sure you use the [Vox] subject tag to clearly identify your hardware type
Stickies for this product:
MSI Vox Box USB 2.0 TV Tuner FAQ
MSI Vox Power Supply...awesome!! PLEASE READ
Troubleshooting problems with hardware and MSIPVS

Well, I got MSIVPS3 to recognize my tv box but I can't seem to get a lock down on any channels. All i get is snow from every channel. No audio either. Everything works peachy on my desktop running win2k but my laptop is where I need the video input from a camcorder. Grrrr. I think I wasted my money buying this P.o.S.

Msi Vox Usb2.0 Tv Tuner

CAN YOU HELP ME I'VE BROUGHT A EXTERNAL USB 2.0 TV TUNER CARD AND IT'S MSI VOX.
IT COMES UP WITH A MESSAGE SAYING USB DEVICE NOT RECOGNIZED AND IT IS MALFUNCTIONING..........
HOW DO I SOLVE THIS PROBLEM NOTHING WORKS CAN'T DETECT THE DEVICE AND THE REMOTE DON'T WORK.
CAN YOU HELP
PLEASE ANY ONE

Probabley the item is defective. I had the same problem and the vedor replaced it for me, the new one works, not that good resolution!

Msi vox usb 2.0 remote/sound problems

please help! i just purchased a new MSI VOX USB 2.0 external tv tuner and i'm having lots of problems...
1. the dial on the side of the box that is supposed to turn the tuner on/off or change channels doesn't do a thing.
2. the remote doesn't work at all
3. sound - i'm using this on a notebook computer and i don't have a line in port. i assume i would be able to just go through the microphone port but it is not so. in the options under properties>device, i can only choose the audio input source to line in (which i don't have) or cd audio (?). it doesn't even work if i set my computer recording settings to 'microphone'... even though i CAN record the microphone input in a sound recording program, i can't hear in in real-time... right now the only way i can hear the TV is to connect the audio cable through my desktop's line in! i can't even hook my speakers directly into the box because the pin hole is too small to fit a normal audio jack...
is my only solution to buy some sort of audio pin converter so i can hook my speakers/headphones directly into the box??
i've downloaded the newest drivers and they don't help at all with any of my problems.
i'm using a notebook computer with windows xp...
please help! thanks very very much!!

I had/have the same problem, with a Dell Laptop running windows XP.
my first solution was to buy a male-male audio connector and hook it directly to my speakers, but having to switch from that and my computer wasn't much fun, I found another work around.
I bought snapstream's beyond TV, and everything has worked well, and I like the snapstream software better than the default software, anyway. The only problem is that you can't use the composite or S-video inputs, as far as I can tell. (and having to spend $50 on another piece of software, but use the trial version first to make sure it works)

Play video games with MSI VOX USB?

Hi,
I am interested in getting the MSI VOX USB 2.0 External TV Box and I am just wondering if I can play video games such as Playstation 2 with my laptop using this tv tuner. I heard some tv tuners have the "delay" make them useless to play video games. Does MSI VOX USB have this "dealy", and how is the the picture quality while playing video game with this tv tuner?
Thanks in advance.
Jim

Hiya,
I dont really understand the VoxBox but I've just inadvertadly managed to put the PS2 on my laptop by plugging the video/audio cables into the converter and then into a USB port, and although it did work, and there wasnt a delay or anything, the quality was poor compared to a TV and also it flickered a bit so I'm not sure it would work that well- but that may have just been my computer playing up. Definitely possible though. Sorry I cant offer much more advice!

MSI VOX USB driver problem (XP PRO SP2)

When I plug in the VOX to the USB Windows looks for the MSI MS8609 driver, but does not find it (even if it is installed). Then after a while it finds a driver called USB2800. I've tried to uninstall this an reinstall VOX SW but I can not change it into MS8609 !

Have you tried installing the drivers from the MSI website?
The drivers are available >>here<<.
Also, make sure your motherboard drivers are installed properly and that there are no yellow exclamation marks in device manager as that would also explain why the sound card drivers won't install.

MSI VOX USB

Hell to all
LAST month i buy MSI VOX USB but after runing TWO hour it start white and repeat the same when i close and start againe. i upgades the driver but it still not work.

Check your computer. Maybe you video board doesn't support this. I have mine since last year and is working quite fine.

Is MSI VOX USB PAL compliant?

Crosspost:
Hi all,
If someone can help me out with this. I bought the MSI VOX in the US on assurance by the vendor that the device supports both PAL and NTSC. However, I am tryign to use this device in the UK, and all I get is noise on the channels.
I opened the box and found the LG Innotek TALN-H200T tuner inside.
Can anyone help me with
1) Does the MSI VOX (the US version) support PAL?
2) Can I use a different driver to run PAL?
3) Is there any hardware settign I can change on the TALN to make it recognize PAL?
Thanks a in advance
Zip

Quote
Originally posted by zipzz
I just got a reply from MSI support that the version I have of the MSI VOX is
MS-8609-010 and this version supports only NTSC. The version which supports PAL is MS-8609-030. So basically, what I have been told is that my box will not work in the UK.
Amazingly, and not surprisingly, they would not give me such an enlightened explanation before I made the purchase. Its only after the $$$ is spent, that all the clarifications and qualifications come through. Before the purchase its "Yes sir, it supports PAL. Dont worry about it!"
Sucks!
If any one who reads this has a PAL tuner, can you please let me know which model LG tuner is in the device. You can find out by shining a strong light (a table lamp) into the device casing near the coax TV connector. The box is semi-transparent and you can look inside to see the model number on the largish silver box inside the device connected to the coax connector. Any help is appreciated.
Many thanks
Sandeep
Sandeep,
This is vivek from India, i have exact same problem, mine is MS-8609-010. I need PAL support. Please let me know if you were able to change the tuner from NTSC to PAL, if yes then how.

MSI VOX USB TV BOX problem!

i tried to use MSI vox usb tv box to my laptop (zt3340EA - Hewlet packart) i tried to install driver from CD but,installation fails and says : driver works only with SP1 (i m using SP2) i have downloaded newest driver from msi site ,still problem. Driver getting installed but my Laptop finds this as Uknown device,and MSIPVS says : no msi Device connected.
Is there any Driver for this device working on M$ windows Xp Sp2?
i have switched usb ports but device still unrecognized.
this device was working great on another pc (xp,sp1). Please Help me :(
Nikos.

Well, I got MSIVPS3 to recognize my tv box but I can't seem to get a lock down on any channels. All i get is snow from every channel. No audio either. Everything works peachy on my desktop running win2k but my laptop is where I need the video input from a camcorder. Grrrr. I think I wasted my money buying this P.o.S.

MSI VOX USB 2.0 Don't work

Hello Team.
I have a "MSI VOX USB 2.0 TV TUNNER", the install has been ocurre without problems but when has tried to run the "MSI PVS" this send a error with the next exeption "0xc00000fd the memory cant read in 0x775735a9". I did un-install everything and after I did install the driver and the software again but this dont work.
Then I download the last updated driver from "MSI website" and the last updated version of "MSI PVS" and don't work again.
After this I did buy the "Intervideo's WinDVR 3" and my TV Tunner work with this but I cant choose the channels, always the software will be send me to "list of channels" I am doing click in "automatic exploration" and the software just send "0 Stereo", somebody know how can i solve this problem? Intervideo just said that I need check this problem with the TV tunner' company
I have:
P4 HT 3.2 GHZ
MB Intel
1024 GB DDR2
MSI NX6600 LE PCI Express
2x100GB SATA
1x40GB IDE
Windows 2000 Server SP4
Sincerely Antony Acuna
Sorry my english it's not good

Hi dear Dr Stu.
I can not change my operating system beacuse I need run SQL Server 2000 enterprise edition and some software that just run over system server editions, I thing that will be run beacause in the product features show "Windows 98/Me/2000/XP".
Intervideo said that the MSI VOX USB 2.0 is not listed into the support cards.
Do you have someting idea?, the problem is that the MSI Box has been a price over that this is.
Thanks in advanced.
Sincerely.
Antony Acuña

MSI VOX TV TUNER USB

Similar Messages

Maybe you are looking for