Msi.webprintlist fatal error during installation could not open key: unknown/component/da42bc899bf25

msi.webprintlist fatal error during installation could not open key: unknown/component/da42bc899bf25bdaf18c3b9b1a1ee8\ab4027db46dde994b955a68c2fdf44a. verify that you have sufficient access to that key, or contact your support personnel. please go to http:\\hp.com\support for troubleshooting information about "fatal error" and " msi.webprintlist"

Hi Assennatog, the problem could be in the registry keys that are still present even if you completely uninstalled all the NI SW. So, after having uninstalled every NI apllication, try to execute the keys deleting proccess, by using MSIBlast, in the way it's explained in the attached doc. Ciao!
Attachments:
msi.doc ‏32 KB

Similar Messages

Error 1402: Could not open key UNKNOWN\SliderCtrl.SlideCtrlProxy\CLSID

I have two users. User A wrote an application using LabVIEW 7.1, including an installer, and gave said application and installer to User B. User B has 8.0 and 8.1 LabVIEW RTE's installed properly. When trying to run the application installer, or just the 7.1 RTE installer alone, the following error occurs every time:
Error 1402. Could not open key:
UNKNOWN\SlideCtrl.SlideCtrlProxy\CLSID
I took the registry info from my machine (had 7.1 installed on it at one time; currently has 8.2 and 8.5), exported everything with "SlideCtrl" in it, imported those into User B's registry, double checked the permission in the appropriate places, re-ran ... same problem. Help?
Certified LabVIEW Developer
NI-VLM Administrator

I found the answer on my own, documenting for the next poor soul ... this was under WinXP
* Go into regedt32
* Right-click on HKCR and select "Permissions" -OR- Click on HKCR and choose Edit->Permissions
* Add the current user and set permissions for Full Control and Read.
It is NOT sufficient to give "Everyone" Full Control and Read, it needs that user id. Brilliant ... current user is not part of "Everyone".
Certified LabVIEW Developer
NI-VLM Administrator

Could not open key UNKNOWN

I am having a problem upgrading from iTunes 9.0.07 to 9.0.2. I've been trying to use the 64-bit installer and have tried disabling my anti-virus software.
I had this same problem when I was running Windows Vista Home Premium SP2 64-bit on this same computer.
At first, when I would download, I had to Download Only and then install.
When I tried to install iTunes manually, it would load very slowly at Copying Files and then say it was Rolling Back Action. After that, it would say that, "The installer encountered errors before iTunes could be configured."
I tried everything people suggested on help forums, the discussions here, and the Trouble installing iTunes or QuickTime for Windows help article in Support.
After uninstalling iTunes, making a backup of my iTunes music from Documents and getting rid of anything else iTunes, QuickTime or Apple related, I tried downloading again from the website (using Firefox). I had the problem that iTunes said it couldn't be downloaded without QuickTime. Okay, easy fix, right? I tried downloading and installing QuickTime and these errors came up:
Could not open key:
UNKNOWN\Components\69413F169B198734FA40BC8B73511DB0\108B43C0CEA676640B35306AE7D2 4051.
Verify that you have sufficient access to that key, or contact your support personnel.
and
Could not open key:
UNKNOWN\Components\9C4307835821FFF47864EE6DABC09AA9\EA2C92A1FBE18F42A12C111C5AAD DDA.
Verify that you have sufficient access to that key, or contact your support personnel.
So then I tried doing what jnd73 said in a different discussion: http://discussions.apple.com/thread.jspa?threadID=2151409&tstart=0&messageID=102 87668#10287668
And I found I couldn't do half of what jnd73 said. Either because it already knows I'm the admin, or because I don't have sufficient access to the key. I can't even get another admin user to download iTunes successfully. I don't know if it's a permissions issue.
The "The installer encountered errors before iTunes could be configured." problem started when I moved from Windows XP Home Edition SP3 32-bit to Windows Vista Home Premium SP1 (Had to update to SP2) 64-bit. I moved from a separate computer (Toshiba Satellite L35-S2151) to this one. I had to move all of my files from my last backup and re-download applications. I think what I did was I moved all of my old iTunes Program Files along with everything instead of just the iTunes folder in My Documents. So, when I downloaded the new iTunes, it didn't make new folders and used the old ones. I was able to make iTunes recognize all of the music I didn't buy through iTunes after I manually found the files, but iTunes never updated correctly.
I'd think now that I got rid of all of the old folders that now I'd be able to install without any problems.
Can anyone help?

I was having the same problem, but I found the solution to the problem.
First, click on Start and search "regedit" without the quotations. Open it up, click on "Edit: in the drop down menu. Next, click "Find" and search for your folder components, not the key component, which is in your case: 69413F169B198734FA40BC8B73511DB0
and
9C4307835821FFF47864EE6DABC09AA9
They should be folders, and inside the folders, there should be a key with the name of that 2nd key. Example, inside the 69413F169B198734FA40BC8B73511DB0 folder should be a key named 108B43C0CEA676640B35306AE7D24051, and the same for the other folder.
Now, to gain permissions for these keys, right-click on the folders, and select "Permissions". Where it says "Groups or User Names", click "Add". Then select "Advanced". Next, select "Find Now" and select the "Everyone" user. Click OK, then OK again, and you should be on the permissions window. For "Groups of User Names", select Everyone and select the "Full Control" check box for Everyone. Then click OK.
Do the same for the other folder. Be careful; for me, there was 3 folders with the same key name, and I repeated the steps above for all 3 in order to make it work. Just check the folders under your folder to see if it has the same name, and if it does, repeat the steps on that folder.
This method worked for me after trying a million different solutions. Hopefully, it works for you too. If it doesn't work, feel free to reply back. And if does work, please reply back, just so I know it did work.
Good luck =]

Error 1402 could not open key: unknown\graph3dctrl.graph3dctrlproxy\clsid

Hi,
I've got the following error during the installation of labview 7.0 student edition on my PC that works with XP.
The error is :
"error 1402 could not open key: unknown\graph3dctrl.graph3dctrlproxy\clsid verify that you have sufficient access to that key"
I have the administrator right on my PC and I seek the key on registry and it doesn't exist at all.
I already have installed successfully the Labview 6.i student edition. I tried to uninstall all national application and reinstall the labview 7.0 but same error appear.
My opinion is that the key cannot be opened because it doesn't exist.
What can I do to install the new labview 7.0?
Attachments:
Labview 7 installation error.jpg ‏22 KB

Hi Assennatog, the problem could be in the registry keys that are still present even if you completely uninstalled all the NI SW. So, after having uninstalled every NI apllication, try to execute the keys deleting proccess, by using MSIBlast, in the way it's explained in the attached doc. Ciao!
Attachments:
msi.doc ‏32 KB

Unable to install itunes Win 7, 64 bit. Error: " Could not open key: UNKNOWN\Components\DA42BC89BF25F5BD0AF19C3B9B1A1EE8\C0B7E33AC99B9CE47B20A823B86 1A19F. Verify that you have sufficient access to that key. or contact your support personnel.

Hi,
I'm not able to install itunes in my Win 7 , 64 bit. getting the below mentioned error.. any help would be greatly appriecated.
" Could not open key: UNKNOWN\Components\DA42BC89BF25F5BD0AF19C3B9B1A1EE8\C0B7E33AC99B9CE47B20A823B86 1A19F. Verify that you have sufficient access to that key. or contact your support personnel."

NCPlater to all haveing the error: ***I HAVE THE ANSWER***
iTunes
Could not open key:
UNKNOWN\Components\DA42BC83BF25F5BDOAF18C3B9B1A1EE8\3e43b73803c7c394f8a6b 2f0402e19c2. Verify that you have
sufficient access to that key. or contact your support personnel.
After following instructions for three different solutions that did NOT work; I found the solution that did work
on the support site for Syamntec.
Readers - Please, you must be VERY familiar with pc jargon and windows vernacular to accomplish the reset
of ALL the permissions in your registry.
Follow the ditrections below and pay attention to the notes for those running 64bit Win7.
Step one, back up the registry.
Step two, go to the MS KB: http://www.microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe-4a91-93cf -ed6985e3927b&displaylang=en and download the file that installs subinacl. It is an MSI file, and will do a quick install of a few Microsoft files. Hint: Look in the folder listed below, "subinacle.exe" may already be there.
Step three, create a batch file (subinacle.bat) with the following commands: (Use Notepad - copy & paste, not the red stuff)
cd /d "Program Files\Windows Resource Kits\Tools" (only for 32bit/x86 machines)
subinacl /subkeyreg HKEY_LOCAL_MACHINE /grant=administrators=f /grant=system=f
subinacl /subkeyreg HKEY_CURRENT_USER /grant=administrators=f /grant=system=f
subinacl /subkeyreg HKEY_CLASSES_ROOT /grant=administrators=f /grant=system=f
subinacl /subdirectories %SystemDrive% /grant=administrators=f /grant=system=f
subinacl /subdirectories %windir%\*.* /grant=administrators=f /grant=system=f
secedit /configure /cfg %windir%\inf\defltbase.inf /db defltbase.sdb /verbose
For 64bit machines substitute for first line of bat file:
cd /d "c:\program files (x86)\windows resource kits\tools"
Step four, run the batch file. Let it run until the Command Prompt screen closes, may take 30 minutes or more.
Step five, reboot the machine and run the install again.
Ladies and Gentlemen; this worked for me and allowed immediate installation of two application packages I had been trying for three months! (Including ITunes 10.5)

Error: Could not open key: UNKNOWN\Components in Windows Server 2012 R2

Hi,
I am trying to install an MSI where i am getting the below error
..\MSI\CHIP_MAPS.msi: Could not open key: UNKNOWN\Components\F5C1BE1268054884D9261E148691452A\34DBF3FA04D67B443A8EE069E02E418B. Verify that you have sufficient access to that key, or contact your support personnel.
I was able to fix this in Windows Server 2008 R2 . With ine instructions provided here
http://www.okino.com/conv/changing_windows_registry_permissions.htm
However In Windows Server 2012 or R2 i followed the below steps.
1. Regedit
2.
Navigate to the following parent container:HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Components
3. Replace all child object permissions with inheritable permissions from this object in permissions tab
4. I don't find the owner tab
Please help me asap
Thanks
Sreeram

then add the user name as new owner
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Error 1402.could not open key:UNKNOWN\MPAPI.WAPCON...

im getting this error message when i install pc suite v6.82 on windows XP. any ideas
error 1402.could not open key:UNKNOWN\MPAPI.WAPCONNServerMP.4\CLSID. Verify that you have sufficient access to that key, or contact support personel....
thanks in adv..

It sounds that there is some permission problems in your register.
Anyway, if you ignore that error message, does installation continue?

Error Code 1402 Could not open Key

When I try to run the auto installer I get a message that says.:
Error 1402.Could not open key:
UNKNOWN\Components\2A31EAB9FA7E3C blalhblhablah
BLALBLAHBLAH..............................
Verify that you have sufficient access to that key, or
contact your support personnel.
How do I fix this?

Hi Chardawg,
Please try and use the below kb article for resolution.
Error 1402 | Error 1406 | Acrobat, Reader
Cheers,
Kartikay Sharma

Could not open key: UNKNOWN\Installer\Products\9B00314CD581E574FBCE93FE37F2911B\SourceList\Media. Verify that you have sufficient access to that key, or contact your support personnel.

Hi guys !
My problem is in installation/uninstallation of iTunes:
Could not open key:
UNKNOWN\Installer\Products\9B00314CD581E574FBCE93FE37F2911B\SourceList\Media. Verify that you have sufficient access to that key, or contact your support personnel.
The error appear first time in installation iTunes 10.3.1.55.
The error repeat in QuickTime, Bonjour, Apple Mobile Device Support, Apple Software Update, just changing the green area.
How i fix this ?
Thanks.
PS: Im administrator.

Start>Run put regedit and press Ok.
1. Go to the key: HKEY_CLASSES_ROOT\Installer\Products\9B00314CD581E574FBCE93FE37F2911B\SourceLis t\Media
2. Right click in Media folder, select Permissions from the menu.
3. You will see that is no user, on the "Permissions for..." dialog box which appears next, press the "Add.." button and add in the "All"
4. Back on the first "Permissions for..." dialog box, click on each account in the top-list and make sure each has the "Full Control = Allow" and "Read = Allow" permissions
5. Click the "Advanced" button and the "Advanced Security Settings" dialog box appears
6. On the "Permissions tab" enable the checkmark box named "Replace all child object permissions with inheritable permissions from this object", then press the "Apply" button
7. On the "Owner" tab, highlight the "Administrators" name in the lower listbox, enable the checkmark box called "Replace owner on subcontainers and objects" and press the "Apply Button"
In my case, many errors appear before, but i fixing 1 by 1 and installation completed. Try and tell me later.

I am trying to download iTunes on to my laptap but I keep getting a "Could not open key: UNKNOWN\Components\ with a bunch of numbers and letters following. I have uninstalled all the iTunes programs. I changed the Regedit but I still get the error?

I am trying to download iTunes to my laptop but I keep getting this "Could not open key: UNKNOWN\Components\ followed by a bunch of numbers and letters. I have unistalled iTunes and all the other apple componants. I also used followed this http://discussions.apple.com/docs/DOC-3581. But I am still getting the same "Could not open key:" error and it tells me that iTunes could not download.

On occasion, when changing ownership or permissions has no effect on the UNKNOWN\Components\ error, the fixit from the following Microsoft document sometimes works:
Fix problems with programs that can't be installed or uninstalled

"could not open key, unknown\components" error while reinstalling

I'm getting a "could not open key, unknown\components" error while reinstalling latest Itunes. Tried several time with same results

Try the following user tip:
"Could not open key: UNKNOWN\Components\[LongStringOfLettersAndNumbers]\[LongStringOfLettersAndNumbe rs]" error messages when installing iTunes for Windows

Hi i can not install itune. There are the error show " Could not open key: Unknown\Components\32A7D634EB632D11CABB00087CCFBB48\DAEC106DF4E2BBB458CC2CA9C46 E3A0C.

Hi,
i can not install itune. There are the error show
" Could not open key: Unknown\Components\32A7D634EB632D11CABB00087CCFBB48\DAEC106DF4E2BBB458CC2CA9C46 E3A0C. Verify that you have sufficient access to that key. or contact your support personal.
I have tried some soution from the similar case to uninstall itune and also related components already but finally the probelm still occured.
Please you help to suggest me what can i do? I need to restore my back up data to the new iphone as the previous one got stolen.
BR,
Sirorath A.

Try the following user tip:
"Could not open key: UNKNOWN\Components\[LongStringOfLettersAndNumbers]\[LongStringOfLettersAndNumbe rs]" error messages when installing iTunes for Windows

Could not open key: UNKNOWN\Components\DA42BC89BF255BD0AF18C3B9B1A1EE8\0DC8CB51B56A0D742ADD098A4295 F08A

I am using Windows 7 and I can not install Quicktime 7 on my pc. I am running the installation as Administrator.
This is the error message I receive.
QuickTime 7 Installation Error
Could not open key:
UNKNOWN\Components\DA42BC89BF255BD0AF18C3B9B1A1EE8\0DC8CB51B56A0D742ADD098A4295F 08A.
Verify that you have sufficient access to that key, or contact your support personnel.
I think I'm missing something in the Reg. files? I'm missing something.
Thank you for your help.
Trim49

https://discussions.apple.com/docs/DOC-3581
https://discussions.apple.com/message/25363960#25363960

Please Please help me. I have been trying to install Itunes 11 for 3 months. I deleted my old version and can not for the life of me get Itunes installed . I have Windows 7 Home. The message is " Could not open key: UNKNOWN\Components\DA42BC89BF25F5BDOAF1

Please Please help me. I have been trying to install Itunes 11 for 3 months. I deleted my old version and can not for the life of me get Itunes installed . I have Windows 7 Home. The message is " Could not open key: UNKNOWN\Components\DA42BC89BF25F5BDOAF1

Try the following user tip:
"Could not open key: UNKNOWN\Components\[LongStringOfLettersAndNumbers]\[LongStringOfLettersAndNumbe rs]" error messages when installing iTunes for Windows

Trouble installing updates. "Could Not Open Key: UNKNOWN\Components\DA42BC89BF25F5BD0AF18C3B9B1A1EE8\7E577B2224C65CF4E801A9E5237 5DB49. Verify that you have sufficient access to that key, or contact your support personnel."

I am having trouble installing updates from iTunes. It used to work flawlessly. I am having trouble finding an email address where I can contact Apple or iTunes. I do not want to take the chance that they will charge me for a phone call because I think it is unfair for them to charge me, since I am using THEIR software already. THEY NEED TO PAY ME!!
Here is the error message I receive each time I try to install the updates:
"Could Not Open Key:
UNKNOWN\Components\DA42BC89BF25F5BD0AF18C3B9B1A1EE8\7E577B2224C65CF4E801A9E52375 DB49. Verify that you have sufficient access to that key, or contact your support personnel.”
If someone would be kind enough to help me, I would greatly appreciate it!!
THANKS!!!!!!

I am having trouble installing updates from iTunes. It used to work flawlessly. I am having trouble finding an email address where I can contact Apple or iTunes. I do not want to take the chance that they will charge me for a phone call because I think it is unfair for them to charge me, since I am using THEIR software already. THEY NEED TO PAY ME!!
Here is the error message I receive each time I try to install the updates:
"Could Not Open Key:
UNKNOWN\Components\DA42BC89BF25F5BD0AF18C3B9B1A1EE8\7E577B2224C65CF4E801A9E52375 DB49. Verify that you have sufficient access to that key, or contact your support personnel.”
If someone would be kind enough to help me, I would greatly appreciate it!!
THANKS!!!!!!

Msi.webprintlist fatal error during installation could not open key: unknown/component/da42bc899bf25

Similar Messages

Maybe you are looking for