MSI Wind DC110 not recognising keyboard

Hi, I have a new MSI Wind DC110. I'm trying to set it up but when I attempted to start it up, it stopped on a screen saying "Press F3 to run Recovery Tool". There is no way I can find to get past this screen. I have a wireless keyboard & mouse, and the box does not respond to any key-press. I plugged in a USB keyboard, and no lights come on and no keys work. I am completely stuck and unable to boot the box.
I found that someone listed the same problem but I could not see any answers!

There are multiple users with this problem. Did you in the meantime find an answer to your question? Could you please post it for our benefit? Thanks

Similar Messages

Can't start MSI Wind DC110

Hi, I have an MSI Wind DC110 as a media centre in my living room. Today when I attempted to start it up it stopped on a screen saying "Press F3 to run Recovery Tool". There is no way I can find to get past this screen. I have a wireless keyboard, and the box does not respond to any key-press. I plugged in a USB keyboard, and no lights come on and no keys work. I am completely stuck and unable to boot the box.

Hello,
In my opinion this is a defective product, as without reading a manual you should be able to get ANY video, no matter of cable. Unless you have bought a proper barebone (which I believe are being sold too). However before you RMA, did you have everything connected? i.e. keyboard, mouse, power and video cables. Not sure (didn't have a pleasure to read manual yet) but does it have some reset button anywhere? Also did you try spamming Delete key when trying to boot in order to get to BIOS?
Ahh one more thing: did this come with anything else? Such as USB drive, or drivers on something? Because when I had trouble with my motherboard(had asus before), inserting CD that came with it, restored BIOS settings. Not sure how this one works, but all I see it doesn't have any CD/DVD Rom..

Does not recognise keyboard on boot

I downloaded the USB debug kit from Apple's developer website and installed it. After restart it does not recognise the keyboard and mouse.

solved! i had configured my keyboard in xorg.conf
I commented out the option: "AutoAddDevices" "false" in xorg
and created a hal .fdi file for the keyboard like this:
cp /usr/share/hal/fdi/policy/10osvendor/10-keymap.fdi /etc/hal/fdi/policy/
and edit 10-keymap.fdi accordingly
more info here: http://wiki.archlinux.org/index.php/Xor … figuration
hope this helps
by the way is this a bug? shouldn't both configurations (hotplugging and old school xorg) work?
Last edited by tasos (2009-10-13 18:13:15)

Adobe Reader 10.1.2 not recognising keyboard input

Hi,
I'm having a problem with Adobe Reader X on Windows 7 Ultimate. Adobe Reader is not recognising any keyboard input, so I'm unable to type in a page number to jump to that page, the alt key doesn't bring up the menu, even Alt+F4 doesn't close the application etc. Has anybody experienced this problem, and if so, is there a solution out there?
I've tried both repairing the installation, and doing a new install, both of which have failed to rectify the problem.
Thanks.

Sorry for the confusion. Please try the following steps:
1. Launch Notepad and type in following:
Windows Registry Editor Version 5.00
[-HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.exe]
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.exe]
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.exe\OpenWithList]
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.exe\OpenWithProgids]
"exefile"=hex(0):
2. Click on File > Save As
3. In the new dialog that appears:
Select All Files in the Save as type list, and then type C:\Exe.reg in the File name box.
Select Unicode in the Encoding list. Save it and remember the file location.
4. Open My Computer and double click on the C: icon
5. You will see a file by the name of "Exe.reg". Double click on the same and click Yes on any dialog that appears.
6. Once completed, restart the computer and your problem should be resolved.
Ankit

MSI TI4200 VTP not recognised in K7N2 DELTA

Hi All First Post and very Confused
Spec First
MSI TI4200 VTP Graphics
K7N2 Delta LISR M/B
AMD 2800 CPU
1GB Samsung P2700 DDR Ram
500 w PSU
80gb ATA 133 HD
120gb SATA HD
Windows XP Proff Edition OS
Problem is that I have just built this computer installed windows and all MB drivers and everything is fine I then install th Graphics card drivers and I get a blue screen upon the restart that is to quick to read and the system just reboots to the safe mode selection screen this is an ongoing loop if i select start windows normally. If i select safe mode the system boots up in safe mode.
I also noticed after I had taken windows back to last known good configuration that windows had not recognised my card and just showed VGA adapter with the yellow exclaimation mark. I have tried another graphics card and that worked fine.
windows installed it etc automatically
How can I read the blue screen or what is on it as it flashes up so quickly and what do you fine people think my problem is I have disabled 8x agp in bios
The TI4200 came out of my previous MSI KT400 Ultra
Please help
Longshanks

Doesn't matter if the old PSU ran your old system. That's not the case now. We need the make, model, and specs of your PSU.
We can't help you if you don't give us the info we requested. Obviously, you have a problem and you can't find it, so you're possibly overlooking something. Read my article on PSU's at the top of the forum. Total wattage rating doesn't guarantee a thing, and many PSU manufacturers intentionally deceive their customers.

Steelseries engine not recognising keyboard

Hi.
I've made a post about this before, but to no avail.
Basically, i bought a GE70-2PC laptop ~6months ago. The first few months, the backlight on the keyboard worked fine with the included steelseries software. Now, that same software does not recognize the keyboard anymore and exits automatically. It does not update, and the countless reinstalls i've done do not work. I'm tempted to format my computer just to get the keyboard working again, but i don't want to lose all of my stuff and have to redownload everything i have on here.
Please help.

Quote from: lextendo on 28-April-15, 23:13:46
Don't know if it's the same issue but a few weeks ago I my keyboard just stopped working, just as the track pad. Didn't notice it directly since I have an external keyboard and mouse attached.
Long story short: the problem was a failed windows update (win 8.1pro x64). Did a "check for updates" manually and the update installed fine this time. That fixed it...
I've got win7

MSI E350IA-E45 USB Not recognised after cold boot.

Any one else have the same issue? My asus (Bluetooth) BT211 is not recognised after cold boot.
I also found the front USB's losing power when PC turned off. Connected them up to 5VSB to fix the issue.
MSI tech has not been back to me if this is a fault design, My motherboard issue or bios issue? Which also means to charge via front USB not work when turned off.
And to top it off I cannot find an answer to whether the Wake on Bluetooth USB is supposed to work?

Quote from: mickas on 12-August-11, 20:09:58
I also found the front USB's losing power when PC turned off. Connected them up to 5VSB to fix the issue.
How did you connect up the USB ports to 5VSB?
I have a similar issue with a newer MSI board and my USB mouse; I'd have to remove and re-insert the USB connection to the mouse after each cold boot in order for it to be recognized. I did a kludge fix by looping the mouse through a powered USB hub that supplies power to connected devices even when the PC is off.
This MSI board doesn't have a hardware jumper to enable 5VSB to the USB ports, unlike other motherboards. Also, none of the "green" or wakeup settings in the BIOS would cause the USB ports to have power when the PC is off.
So, how do you connect 5VSB to the USB ports? I've heard that crossing the regular 5V rail with 5VSB is a no-no, so I can't imagine how you did it.

First time starting up iMac, USB keyboard not recognised

i have tried to set-up my imac, however the keyboard is not recognised and says that i have to turn on my bluetooth keyboard when i have a USB keyboard and it will not go on to the next step.

Hi manocchio1994,
Thanks for contacting the Apple Support Communities. I understand your keyboard is not recognized when connecting if for the first time and I know how frustrating that can be. There is a fantastic article available for USB keyboard troubleshooting I would recommend.
None of the keys on my keyboard work
http://support.apple.com/kb/TS1996
Troubleshooting your Apple USB Keyboard Step-by-Step
If your keyboard keys still aren't working after trying the steps in USB Basic Troubleshooting, try these steps, in order, until you've come to a resolution.
▪ Unplug all devices from your computer, including your mouse and keyboard, as well as your printer, scanner, cameras, iPod, external hard drives, and hubs. (Warning: Some devices, like iPods, may require you to perform steps before it is safe to unplug them.) If you have a hub, don't forget to unplug it as well.
▪ Plug your keyboard and mouse back into your computer firmly and securely. Take special care to make sure that the connector is completely in the port. (USB plugs fit into ports one way only, and won't plug in if you try to plug them in upside-down.)
▪ If that still doesn't work, try plugging your keyboard in to the other USB ports. Be sure to try them all. Check to see if the keyboard's Caps Lock light turns on when you press it, and try typing in one of your applications, such as TextEdit.
▪ If your keyboard works in one of your USB ports but not all, your computer may need service to resolve an issue with its USB port or ports.
If your keyboard doesn't work in any of your computer's USB ports, it appears that your keyboard isn't functioning properly and needs to be replaced. You can order this part online. Order a replacement keyboard.
If needed, I suggest resetting the System Management Controller as well. Those steps can be found in the following section of this article.
Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
Thanks for reaching out,
-Joe

Hi can anyone help ...my keyboard is not recognised. I have gone through all the troubleshooting steps. It's not the batteries, although I did keep getting a message for weeks saying the batteries were low when i knew they weren't. Loose connection ?

keyboard not recognised by Mac.

Try:
Troubleshooting wireless mouse and keyboard issues
and maybe:
OS X: Bluetooth devices become unresponsive

Mozilla suddenly does not recognise my keyboard. IE does.

I have to write this on a document and then copy and paste because Mozilla will not recognise the keyboard.
A sdfg hj klçº\ ~zxc vb n m,.--+<1 234 5678 90'« qwe rtyui op+ásdf Ghjklçº \~zx cvb nm,.--+<1 234 890'«qwer
That is what it looks like when I type straight into Mozilla.
Tyui op +ás df ghjkl çº\~zxcv B nm,. --+<1234 5678 )0'«qwer

'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]'''''
<BR>While you are in safe mode;<BR>
'''''Firefox Options > Advanced > General'''''.<BR>
Look for and turn off '''Use Hardware Acceleration'''.<BR>
While you are in safe mode, does the keyboard still have a problem?

After a power outage my usb ports on the back of the tower do not recognise the apple usb keyboard upon start up. How do I fix this issue?

I have a Mac Pro 5.1 and after a power outage my usb ports on the back of the tower do not recognise the apple usb keyboard upon start up. If I leave the plug out and then insert the keyboard after start up it works fine. The same happens with the front usb ports. How do I fix this issue?

System.log says USB related message?
Resetting SMC as well as NVRAM could solve the problem.
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM

HT1492 my wireless keyboard will not recognise Q-O and Z-M

Hi my Wireless Keyboard does not recognise half the keys. I have gone through all the troubleshooting basics but nothing has changed.
It is the top row of letter Q-O (but P works) and the botton row Z-M. any ideas?(I am using a wired keyboard right now!)
Thanks

Moderators can delete this post. (I don't see any option to edit or remove)
...I'm an idiot. My power supply wasn't connected properly. (the light was green, not red to indicate charging)
Once I fixed that, everything is working properly.
0 for 1 for Apple discussion forum topics!

Can not sync centro with MSI Wind

I just purchased a new netbook (MSI Wind) and I want to use my Centro for internet (via PdaNet). I have done this in the past with my MacBook Pro (running Windows XP Pro in boot camp) and with my Latitude D630 (also Windows XP Pro). For some reason, however, I can't even get hotsync to work with the MSI Wind (running Windows XP home).
I started out by installing the latest version of PalmDesktop (downloaded from Palm.com). During the point in time where the installation calls for syncing, I tried to sync and it would not work. There was no error on the PC. No hotsync window opened. Eventually the centro just gave me a generic "can not connect" message:
"The connection between your handheld computer and the desktop could not be established. Please check your setup and try again."
Of course I tried the online support first: http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE?New,Kb=PalmSupportKB,ts=Palm_External2001,Case=obj(2630)
I did everything I could: disconnect Plam device, soft reset, clean the connector, check the ports, etc. I used the developer's back door. I tried rebooting the MSI Wind and trying again. (Yes, the Palm Desktop application is running.) I tried plugging my Centro into the Dell Latitude I have laying around. It synced. I plugged it back into the MSI Wind. No die. I tried multiple ports on the MSI Wind. The only thing I didn't do is check the HotSync configuration because the link from the KB article is broken: http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE?New,Kb=PalmSupportKB,ts=Palm_External2001,Case=obj(28536), but I did check all the settings that I could see from the PalmDesktop installation on the Dell (where it works) and the MSI (where it doesn't) and everything looked identical to me. I also haven't re-installed the PalmDesktop softare (yet) because it doesn't make sense that there would be left-over files from a previous installation given that this is a fresh installation of Windows and the first time I've installed PalmDesktop.
I don't know what the problem is. Any further suggestions? It's really a bummer. The MSI Wind is pretty much useless to me if I can't get internet to it via the cell phone, and I can't do that if I can't even get hotsync to work.
Post relates to: Centro (Sprint)

I managed to get the hotsync to work eventually. I had tried the USB port on the right and the one on the left closest to the battery. Neither worked. I figured if 2 didn't work, the third wouldn't either, but when I plugged it into the USB port on the left farthest from the battery it suddenly started working.
I have no explanation for this.
Now if only I could figure out the darn Bluetooth...
Post relates to: Centro (Sprint)

Rtl8187se (MSI Wind) netcfg wpa_suplicat (eduroam) not working

Hello boys and girls,
I try to connect to wifi on school with my MSI Wind.
I try to connect with this driver http://aur.archlinux.org/packages.php?ID=20673
and then with ndiswrapper this windows drivers http://driverscollection.com/?H=RTL8187SE&By=RealTek (ndiswrapper not working "scan nothing")
and i have this error
sudo netcfg eduroam
:: eduroam up - wpa_supplicant did not start, possible configuration [FAIL]
my /etc/wpa_suplicant.conf (its configuration from wicd "working" http://wicd.net/punbb/viewtopic.php?id=275 )
network={
ssid="eduroam"
scan_ssid=1
proto=WPA
key_mgmt=WPA-EAP
pairwise=TKIP
group=TKIP
eap=PEAP
identity="[email protected]"
password="pass"
phase1="peaplabel=0"
phase2="auth=MSCHAPV2"
my /etc/network.d/eduroam
CONNECTION="wireless"
INTERFACE=wlan0
SCAN="no"
SECURITY="wpa-config"
ESSID="eduroam"
IP="dhcp"
TIMEOUT=10
DHCP_TIMEOUT=20
WPA_CONF="/etc/wpa_supplicant.conf"
I don't know where is mistake.
Last edited by zajca (2008-11-26 10:36:31)

I try manual wpa_suplicant (same configuration)
and this is issue
[zajca@netbook ~]$ sudo wpa_supplicant -Dwext -iwlan0 -c/etc/wpa_supplicant.conf
Line 565: unknown EAP method 'SIM'
You may need to add support for this EAP method during wpa_supplicant
build time configuration.
See README for more information.
Line 565: failed to parse eap 'SIM'.
Line 568: failed to parse network block.
Line 575: unknown EAP method 'PSK'
You may need to add support for this EAP method during wpa_supplicant
build time configuration.
See README for more information.
Line 575: failed to parse eap 'PSK'.
Line 579: failed to parse network block.
Line 611: unknown EAP method 'FAST'
You may need to add support for this EAP method during wpa_supplicant
build time configuration.
See README for more information.
Line 611: failed to parse eap 'FAST'.
Line 617: failed to parse network block.
Line 622: unknown EAP method 'FAST'
You may need to add support for this EAP method during wpa_supplicant
build time configuration.
See README for more information.
Line 622: failed to parse eap 'FAST'.
Line 628: failed to parse network block.
Failed to read or parse configuration '/etc/wpa_supplicant.conf'.

I want to install Logos on an NT4 workstation. When I click on the "Logos.msi" file the "Open with" popup box appear. NT4 does not recognise the "Logoshe Logos software on a .msi" file.

I want to upgrade the Citadel database with the Logos software. I have download the Logos.zip file from NI, unzipped it and install it on a WIN2000 system with no problem. When I tried to install it on a NT4 workstation by clicking on the "Logos.msi" file the "Open with" popup box appear. Thus NT4 does not recognise the ".msi" file.

Karolus,
most likely you did not install any newer software packages on this Windows NT machine. NT does not have the MSI installer engine preinstalled thus the first MSI based software would install this engine. E.g. if you install Lookout 4.5.1 or 5.0 before you try to upgrade Logos this should not be a problem anymore. Or if you install DSC that means LabVIEW 6.1 before this shouldn't be a problem either.
If you really want to install just Logos alone than you would need to install the MSI engine manually before by executing the InstMsiw.exe from your CD. You might get this MSI engine as well from Microsoft.
Hope this helps
Roland

MSI Wind DC110 not recognising keyboard

Similar Messages

Maybe you are looking for