MSI x58 Platinum SLI Bios 7522 v3.5?

Hi all,
Has anyone updates to Bios 7522v3.5 for mobo X58 Platinum SLI yet?
Description:
- Update CPU micro code.
- Update LAN ROM.
- Improved memory compatibility.
Thank you!

Quote from: screwtech02 on 14-July-09, 12:25:33
Just flashed my Platinum with it, seems ok so far, will try and push it a bit the next couple days to see if it clocks any better than 3.4...
Did you flash for any specific reason like to fix a problem, or just because it was the latest?

Similar Messages

MSI X58 Platinum SLI BIOS?

Anyone have this BIOS? :D

Which BIOS Version are you currently using? Can you please check?
Is there any particular BIOS Version you are looking for?

Problem with MSI X58 Platinum SLI - IOH temperature !

Hi guys.
I have this PC configuration:
- MSI X58 Platinum SLI ( Bios Version 3.8 - http://img822.imageshack.us/img822/6707/161020101249.jpg )
- Intel Core i7 930 2.80 GHz box ( with Intel Turbo Boost running sometimes at 3.06 Ghz )
- MSI GeForce GT240 1GB DDR5 128-bit HDMI
- Corsair 6GB DDR3 1333MHz CL9 XMS3 Triple Channel Kit ( sets to AUTO and running at 1066 Mhz )
- Corsair CMPSU-750TXEU
- Ordinary case ( http://img828.imageshack.us/img828/4200/161020101246.jpg & http://img29.imageshack.us/img29/8480/161020101247.jpg ).
- Windows 7 Ultimate 64 bit.
I bought my PC components 2 months ago, so they are new.
Now, guys I think that is a problem with my motherboard. When I turn on the computer in Bios I have this temps: CPU – 30 C (86 F); IOH – 71 C (159 F); System 30 C (86 F) - http://img687.imageshack.us/img687/394/161020101242.jpg. After 2 minutes the temperatures are: CPU – 34 C (93 F); IOH – 82 C (179 F); System 41 C (105 F) and 2 more minutes later the temperatures are: CPU – 34 C (93 F); IOH – 84 C (183 F); System 43 C (109 F). After 30 minutes of doing nothing I have this temps: CPU – 35 C (95 F); IOH – 85 C (185 F); System 42 C (107 F) -
Guys it is normal with IOH temperature ? I am a little worried about it ( to be honest I am more than “a little” … I am worried a lot ).
Ok, I know I don’t have a good case but in 3 weeks I should receive this Thermaltake Spedo Advance Case (http://www.thermaltakeusa.com/Product.aspx?C=1121&ID=1829) and I will buy a new CPU cooler ( I don’t know yet wich one – maybe Corsair CWCH70 or Noctua NH-D14 but I have to see the case first … to be sure there is a plenty of space for those coolers ).
Pls help me with that IOH temperature. It is normal ? What if I intend to make a little OC ( lets say CPU to 3652 Mhz and RAM to 1333 Mhz … but also I will ask for your support ! ) my motherboard will burn ?
If it is necessary I will contact my retailer and send him back the motherboard but … I like MSI a lot.
Thx guys for your support !

Hey guys,
Here is a nice cheap alternative.
Here is my story about the same issue. I found it after looking at why my computer freezes sometimes. Not very often but enough for me to do some investigation. I noticed my IOH temp was a whopping 117 degrees Celsius. lol. Surprised my mobo didn't burn out by now. I wanted to evaluate the situation with the heat sink and decided to take it off. After taking it off I found extremely crusty purple compound on board the chipset and the heatsink. I took me FOREVER to scrape it off. it was almost like a cement which I found odd. After scraping and cleaning the surfaces with alcohol, I placed some silver compound on and proceeded to put it back on.
Well, upon hooking everything back up I was still at 95 to 103 degs. Now I started to really look at the options to replace this. I had SLI config which means I had to do something clever with the southbridge as well. A nice thermaltake chipset solution w/fan and a low profile copper southbridge with shipping was about 45 bucks. Hmm ... This is a sure fix from the threads I have read and its really kid of expensive to fix a simple defect. the problem is not necessarily with the heatsink not being sufficient. Its the combo of the compound used vs the amount of pressure applied between the heatsink and chipset. It was completely unacceptable. I knew this right away when I was watching the temp and then I would press on the top of the IOH heatsink and I would watch it drop another 15 degrees in less then 10 seconds. The springs are extremely weak and not effective at all in transferring the heat from the NB.
Here if my fix. Cost me less than a dollar at the hardware store and it works ideal thus far. Do this at your own risk. Doing this will probably void any warranty too. All my problems are solved and I am running at 57 degrees, YES, 57 degrees with the stock heatsink and no additional cooling.
For one scrape all that old crap off like I did. Apply your new compound. But when you go to replace your heatsink, use the following method. The trick is to use metal screws with a mobo washer, original springs from the plastic studs and a nylon locknut. Use screws that are the same diameter and length (maybe a tad bit longer) as the plastic retainer studs. Also grab a few of those red nylon mobo washers too, were gonna need them as well.
After scraping and applying compound, reassemble as follows. Screw with washer inserted into the back of the mobo so the threads are out front. The plastic/nylon washer is betweeen the screwhead and the back of the mobo as a insulator. Put the heatsink on. With the threads thru the heatsink already, put the springs on and start spinning on the locknut. I torqued the nut down on the spring until the spring almost became fully compressed. The purpose of the spring here is really to prevent you breaking something and at the same time using the max force of the spring since it weak to begin with. Thats why we need to compress it down pretty much all the way. There will be little to no room in the spring at this point. The heatsink at this point should be pretty solid to the board as well. I noticed with the plastic studs before the heatsink would wobble if you gave it a little rocking back and forth before. Not this time. Shouldn't move much if at all. Remember not to torque down too much. You don't want to go beyond the springs compression. Even if you did by accident, its better then not using a spring at all. If you feel that it starts to feel tight when torquing, you torqued too far. Stop an backup a 1/4 turn or so. It is also very important to make sure both torques are equal on both sides as well. Alternate sides when torquing down. I could tell by how much thread I had left on both sides and by looking for any uneven sides.
To summarize, the compound is a problem no doubt. After you resolve the compound issue, its all about the adequate pressure between the heatsink and the IOH. Much like the amount of pressure needed between your CPU and your heatsink give or take. And the pressure that would be as an aftermarket solution like the thermaltake chipset cooler. You dont see cheesy springs on that. Wake up MSI. Simpy using a more effective spring could save MSI some cash in the long run. I envision a leafsprin design like the thermaltake chipset one. The heatsink design could be better, sure, but the design itself is not the problem. Replace the heatsinks if you would like to, if your overclocking and stuff. Funny, this board I have is a refurb too and only had it for a few weeks. Figured they would have done something about it.
Sorry the pics are not the best. Here is about as close as I could get to the finished product

MSI X58 Platinum SLI how get beyond Intel Matrix Storage v 8.5.0.1030 Option Rom

I would like to know if I can get beyond Intel Matrix Storage v 8.5.0.1030 Option Rom
I am also running a X58 Platinum SLI Bios v3.90

The Intel Matrix Storage Manager Option ROM is pretty much a more or less independent BIOS Module. It would be MSI's job (the job of MSI's BIOS Engineers) to provide an official BIOS Version that includes an updated version of the Intel Matrix Storage Manager Option ROM Module.
Alternatively, it is possible to exchange that particular module via a relatively simple BIOS Modification (given, that one has a copy of v8.5.0.1013).
Follow NovJoe's suggestion to contact MSI first. If they (for some reason) have second thoughts regarding an Intel Matrix Storage Manager Option ROM Update, we could consider the option of modding a BIOS for you.

MSI K8N Platinum SLI bios v.3.3

I found this: http://www.msi-computer.co.jp/support/bios/index.php?p=K8N%20SLI%20Platinum
Have anyone tried?

Quote from: syar2003 on 19-May-05, 01:34:23
Venice and san diego cores has no fixed vcore based on their opn numbers as earlier models.
It's variable (new feature) and this is probably causing motherboard vendors some headakes where it
comes to vcore modification and over volting in bios implemetation .
Ref: http://www.xbitlabs.com/articles/cpu/display/athlon64-venice_3.html
That appears to be the case...based on this response I got from MSI today! Looks like a fully compatable BIOS for Venice and San Diego will not arrive until June.....
-M
Dear Customer,
Since the mb has not been certified to support the Venice and San Diego Core processors, please wait until beginning of June, 2005 for the release bios support for the mb.
Sincerely,
Technical Support Division
MSI Computer Corp.
http://www.msicomputer.com
MSI Platinum Series Motherboards -- In Pursuit of Quality Perfection.
1-626-913-0828
1-626-581-7721 Fax
From: M
Sent: Monday, May 16, 2005 8:02 PM
To: User Support
Subject: RE: 3 -- Customer Problem Description Form
Importance: High
Hello,
I tried this BIOS and it only allowed a max of 1.4V on CPU VID which read as 1.31V in the hardware monitor…when I added the 9.9%.... the highest it would show is 1.47V No better than before….
M
From: MSI Technical Support Team USA [mailto:[email protected]]
Sent: Tuesday, May 17, 2005 8:37 PM
To: M
Subject: RE: 3 -- Customer Problem Description Form
Dear Customer,
Please kindly try with the attached beta (3.37) bios for the mb.
Sincerely,
Technical Support Division
MSI Computer Corp.
http://www.msicomputer.com

MSI X58 Platinum SLI RAID Issues

I recently bought another 300GB WD VelociRaptor and I am trying to set up a RAID 0 array through the BIOS using the JMicron controller. (sata7 and 8) I have set it up in the bios through the DriveBooster Manager or whatever and selected RAID 0. Windows setup detects a 600gb stripe but will not let me install due to drivers. I have put the JMicron drivers on my flash drive and they dont seem to work. Any insight on this?
EDIT: strangely enough I unplugged my drives and reseated the connections and in windows setup I didnt get any errors; it didnt even ask for a driver but I installed them anyway. I remember reading somewhere that if a SATA cable is bent in several ways it might cause problems like this.

SATA cables should never be bent sharply. Use rounded bends that don't exert much pressure at the turn.

MSI X58 PLATINUM, the latest bios and how to enable turbo boost

1) Wich motherboard is ? MSI X58 PLATINUM or MSI X58 PLATINUM SLI ?
2) What is the lastest version Bios and where can i get ?
3) How to enable turbo boost in this motherboard ?
4) Thanks so much guys.

My bad. The obvious lack of your self research got the better of me. I do not take helping, if I can, lightly. This is new technology, & a lot of expertise is in short supply. I downloaded the manual on this board & read the bios section, & in CMOS Setup, you should find an "Enable" setting for Turbo Boost. If you don't, please contact MSI Tech Staff @ http://ocss.msi.com.tw Also, (in your manual), is a reference under "Intel Turbo Boost Tech", which clearly states "for further information please refer to Intel's official website". By your original post, CPU-Z says it's an SLI? What did you buy? Does it say on the retail box? At MSI's website, the X58 Platinum (not the SLI), has version 1.0 bios offered in three global region zip files. M7522v1.0 Euro.zip, M7522v1.0 ASIA.zip, & E7522v1.0.zip. J.T.N. is correct, the SLI board takes something else. Are both boards bios's compatable? I have no idea. Recommend step one as to confirm with MSI what board you truly have & go from there.

Doesnt boot Black/Blank screen when a cd-rom is connected - MSI x58 Platinum

i7 920
MSI x58 Platinum *latest bios, updated it after experiencing this issue*
Corsair 3x2gb TR3X6G1600C8
OCZ OCZ700MXSP 700W SLI/CrossFire Active PFC
geforce 280gtx
Windows 7 64bit
This is a build working perfectly for over a year.. well one day my mom turned off the computer when I got home it wouldn't boot I disconnected/reseated everything and was able to figure out if I didn't have my dvd drive hooked up it will boot perfectly fine. I should note that the drive shows up fine in the bios and that with a pata hard drive it will load windows fine.
I've tried 2 pata drives and 1 sata drive all working/tested in other machines .. and it stops at the same exact spot every time right after the bios and before the Windows logo would normally pop up it will just sit on a black/blank screen forever. I have never heard of a issue like this where it wasnt the ide channel going bad or the drive itself but since a harddrive on the ide channel works i assume its good.
I didnt know if i should post this in the windows 7 64bit forum or this but im leaning towards motherboard as the issue because it still freezes at same exact spot even with no hard drives connected , so I couldnt boot anything from the dvd-drive. I'm also thinking its the mobo because i had it repaired a year ago, see my old thread here
https://forum-en.msi.com/index.php?topic=127312.msg958264#msg958264
Any idea's or suggestion please let me know.

A PSU acting up can cause some strange things to happen. Have you confirmed that the DVD drive is working correctly?
Quote
I couldnt boot anything from the dvd-drive.
Is the DVD drive enabled in the boot sequence?

Flashing the bios on an X58 Platinum SLI

I'm just wondering how I can flash the AMI bios on my X58 Platinum SLI because the instructions ask to create a boot floppy, but the mainboard does not support floppy disks.

Why do you start a new topic, when the question was already answered in your other thread?
- TOPIC CLOSED -

Memory not recognized on MSI Neo4 Platinum SLI

I just installed another 512mb of RAM on this system:
MSI Neo4 Platinum SLI
2 x 512mb Corsair XMS XL PRO
1 x 512mb Corsair XMS XL (the one that doesnt work)
IDE HDD
Windows XP PRO
BIOS, and every program i run that can see system specs shows that the infact all 3 Sticks
are recognizable. Though...Windows and a program that shows me my physical memory max both
point out i have only 1 gig of RAM!?
It's there, just not being used?
Now the only difference with the XL version and the XL PRO version is the heatspreader,
everything else is the same....so nothing should be conflicting.
Since the computer somehow knows all my part's details..im thinking just because
the new ram doesnt have PRO that it may not be recognized to work together.
Even so...ram should downclock etc with this motherboard...so this stupid little name
issue shouldnt cause the computer to ignore the ram!
I tried switching DIMM slots, no luck.
Any ideas?

It's a AMD64 dual memory channel system motherboard/CPU.
Valid memory populations are
1.stick in one of the channels .(single mode 64bits)
1.stick in each channel .(dual mode 128bits)
2. sticks in one of the channels.(single mode 64bits)
4.sticks ,2 in each channel.(dual mode 128bits)
3 sticks is n/a.
The population on memory controller , it's initialization and modeselection , single/dual mode is chosen by the A64 cpu.
It's been said that later rev.E cpus can autoselect unmatched population between channels (of e.g 3.sticks) and
set the whole memory pool in single mode.
But i have never seen anyone successfully test/run it .

MSI x58 platinum Problems???

To start off, I am a newb. I have...
msi x58 platinum MB
I7 920
Corsair 6gb ddr3 1333
CoolerMaster Cosmos case
Asetek liquid cpu cooler
800w PSU
ati 4850 GPU
Vista x64
I have read alot of the overclocking threads for this board.
Kinda seems like I chose the wrong one!! LOL!
I cannot get anything over 3.0GHZ
The max base clock the Mobo will let me do is 151???
I have even tried to manually change the switches on the board to 166 instead of 133..
Can somebody please help??
I tried doing everything in the BIOS.
BTW how do you add pictures here??

Images need to be hosted on a website, such as www.photobucket.com or your own webpage.

Various advice needed to overclock cpu using my MSI k8n platinum sli

Hey guys, i recently overclocked my amd 64 3500 cpu to 2.4ghz (from 2.2ghz) i was wondering if any could tell me how high i can get this cpu up to using the msi k8n platinum sli mobo.
At the moment the cpu's temp goes to 40-45 oC.
If i can overclock the cpu some more, can anyone give me detailed instructions on how to overclock it as i'm computer newbie.
i'm using the standard amd heatsink and fan so i know that will comprimise the potentail of the cpu's overclocking capability, as i heard that some people managed to get their cpu up to 3.ghz with a high quality fan, so i was just wondering if anyone can tell me how high i can get my cpu frequency with a standard fan as i really don't want to risk damaging the cpu if i go overboard.
Thnx in advance.
P.S Does anyone come across any green flashing lights while playing their games when the high performance settings mode is set to optimized in bios settings mode??
AMD ATHLON 64 3500@ 2.4GHZ
MSI K8N NFORCE4 SLI PLATINUM MOBO
1024MB DUAL CHANNEL DDR RAM 333MHZ
120GB HDD
2X PNY GEFORCE FX 6600GT PCI-E (SLI MODE)

what HSF for cpu/ cooling for the case do you use? And also, where are the flashing lights?

Msi x58 platinum & vcore

Hi guys,
how to give the DEFAULT voltage to Cpu, Dram and so on?
setting "0.00"? I dont want auto, i need to increase little by little the bclk but having vcore and so on 'frozen' at default, to understand the limit of cpu
If i set "0.00" to vcore, CPUZ shows me that voltage is 1.12 but can change a little bit more or less. Is that normal?
thanks a lot

Ok, here's my complete configuration:
1) Motherboard: MSI X58 Platinum
2) Processor: i7-920
3) BIOS version: 3.80 (latest version)
4) VGA: Inno3D 8800 GT (512 MB DDR3)
5) Memory: 3 x 2 GB (Corsair DDR3 triple channel)
6) Hard drive: 300GB (Western Digital Velociraptor) + 1TB (Western Digital Caviar Black)
7) Optical Drives: DVD-RW (Asus), DVD-ROM (Asus)
8) Operating System: Windows 7 Ultimate (64 bits)
9) Power Supply: Sensonic 650 Watt

MSI X58 Platinum overclocking

I have not been able to find any thread yet dedicated to the overclocking of the MSI X58 Platinum motherboard. I am having a great deal of difficulties using the v1.1 BIOS. If you have successful settings please post the here. I would expect that this will be a popular mobo because of its price. Thank you

I read this on a neoseeker review of the eclipse. Granted it's a different version of the msi x58 but some of the info might be useful.
Quote
To get to the maximum stable overclock, 4.095GHz, all I had to do was:
* Set the memory multiplier to "3" (actually 6)
* Set memory timing to 7-7-7-20-1T
* Fix PCI at 37.3MHz
* disable spread spectrum
* Enable EIST
* disable C-state
* Enable "Turbo" boost
* set base clock to 195MHz
* set QPI to Full-Speed
* leave it at 4.8GT
* use a Noctua NH-U12P with their new Socket 1366 adapter
I did not have to change the voltages at all!
Full review here: http://www.neoseeker.com/Articles/Hardware/Reviews/msi_x58_eclipse/
I have no idea why setting the pci freq to 37 would help... maybe to disable auto clocking? Well, at any rate..
Hope it helps!

MSI X58 Platinum - power button after hibernate not working

Hi,
I have MSI X58 Platinum board that is having a problem recovering from hibernate state.
When I press the power button, it will turn on for about 2 seconds before shutting off again. Nothing is shown on the screen.
After pressing the power button several times more, it will then power up again and wake up from the hibernation. Everything is back to normal after that.
It used to work fine where single press to the power button is all it takes to wake up.
Has anyone experience this problem? It has no problem going to hibernate state (S3).
Thanks.

Ok, here's my complete configuration:
1) Motherboard: MSI X58 Platinum
2) Processor: i7-920
3) BIOS version: 3.80 (latest version)
4) VGA: Inno3D 8800 GT (512 MB DDR3)
5) Memory: 3 x 2 GB (Corsair DDR3 triple channel)
6) Hard drive: 300GB (Western Digital Velociraptor) + 1TB (Western Digital Caviar Black)
7) Optical Drives: DVD-RW (Asus), DVD-ROM (Asus)
8) Operating System: Windows 7 Ultimate (64 bits)
9) Power Supply: Sensonic 650 Watt

MSI x58 Platinum SLI Bios 7522 v3.5?

Similar Messages

Maybe you are looking for