MSI X58 PLATINUM, the latest bios and how to enable turbo boost
1) Wich motherboard is ? MSI X58 PLATINUM or MSI X58 PLATINUM SLI ?
2) What is the lastest version Bios and where can i get ?
3) How to enable turbo boost in this motherboard ?
4) Thanks so much guys.
My bad. The obvious lack of your self research got the better of me. I do not take helping, if I can, lightly. This is new technology, & a lot of expertise is in short supply. I downloaded the manual on this board & read the bios section, & in CMOS Setup, you should find an "Enable" setting for Turbo Boost. If you don't, please contact MSI Tech Staff @ http://ocss.msi.com.tw Also, (in your manual), is a reference under "Intel Turbo Boost Tech", which clearly states "for further information please refer to Intel's official website". By your original post, CPU-Z says it's an SLI? What did you buy? Does it say on the retail box? At MSI's website, the X58 Platinum (not the SLI), has version 1.0 bios offered in three global region zip files. M7522v1.0 Euro.zip, M7522v1.0 ASIA.zip, & E7522v1.0.zip. J.T.N. is correct, the SLI board takes something else. Are both boards bios's compatable? I have no idea. Recommend step one as to confirm with MSI what board you truly have & go from there.
Similar Messages
-
I have been fighting a losing battle with iDVD. What is the latest version and how can I obtain it?
I have been fighting a losing battle with my copy of iDVD. What is the latest version and how do I obtain it?
The latest and last version of iDVD is 7.1.2. iDVD 7 is included in the boxed disc of iLife 08, 08 and 11. You can get copies of them at Amazon.com.
The History of iLife
Version
Intro
Cost
OS
IPhoto
iWeb
iMovie
iDVD
iTunes
Garageband
iLife
01/03/03
$49
10.1
2
3
3
3
iLife 04
01/06/04
$49
10.2.6
4
4
4
4.2
1
iLife 05
01/11/05
$49
10.3.4
5
HD 5
5
4.71
2
iLife 06
01/10/06
$79
10.4.3
6
1
HD 6
6
6.0.2
3
iLife 08
08/07/07
$79
10.4.9
7.0
2.0
7.0
7.0
4.0
iLife 09
01/06/09
$79
10.5.6
8.0
3.0
8.0
7.0.3
5.0
iLife 11
10/20/10
$49
10.6.3
9.0
3.02
9.0
7.1
6.0
No matter what iLife version you purchase you'll need to run the latest updater which is availalbe from the Apple Downloads webpage.
OT -
I have HP Pavillion G6 (core i5 2430M) .. I want to know how to enable turbo boost?
Intel® Turbo Boost Technology is a way to automatically run the processor core faster than the marked frequency if the part is operating under power, temperature, and current specifications limits of the Thermal Design Power (TDP). This results in increased performance of both single and multi-threaded applications. Intel® Turbo Boost Technology 2.0 takes advantage of the power efficiencies introduced with having an integrated die for processor and graphics. It is also optimized for the new micro-architecture that was introduced with the Intel® Core™ i7-2xxx processor series and the Intel® Core™ i5-2xxx processor series.
-
Msi x58 platinum 1.5 bios, have you tried ???
i see that bios version 1.5 for the x58 platinum is officially out now on msi website downloads (not beta).
has anyone tried it and is there any benefits noticible ?? iam still on version 1.1.Quote from: David J on 18-May-09, 03:15:41
You asked Mike, but in layman's terms smart fan is a fan that will automatically adjust its rpms based on the system's temperature. S3 is an industry standard for when the computer goes to "sleep" in order to save energy.
i went in bios for a look on smartfan, i found it, mines is disabled and iam unsure how it should be set, so i left it alone, it has options to change it from 40c up to 70c, but iam unsure what it should be set to, could someone tell me ??
i also noticed that in bios i can set the system fans too, 3 settings, 50%, 75% and 100%, mines are all on 100%, again i left them alone at 100% as iam not sure what they should be set to, can someone please tell me ??
This may help, i have an i7 920 and its clocked to 3500, my tempreatures are not too bad, on running the intel burn test the very very most the cpu temp peaks at for a second now and again is 64c.
And my system sounds like a rocket ship, LOL, fans are LOUD.
hope someone can help ,me. -
How to enable turbo boost in my machine
i have hp( pavilion 15-n240se) .
my operating system is windows 8.1 .
product number:F9U42EA#ABV
i want to know if my processor goes to turbo boost mode automatically or i should enable it in some howHi,
The system itself will handle the process that means automatically.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Anybody any ideas?
Never mind sorted it out lol. Somebody did a system restore of a week or so. I had done the update during that time and it was lost. Just redownloaded itunes from the internet and its working fine now.
-
MSI X58 Eclipse 7520 - Latest BIOS & CPU support List?
Hi...
http://www.msi.com/product/mb/Eclipse-SLI.html#?div=CPUSupport
http://www.msi.com/product/mb/Eclipse-SLI.html#/?div=Download
does Bios v1F support newer Xeon w3690, 990x, 995x ?
CPU support page is outdated..
.txt does not say.Quote
does Bios v1F support newer Xeon w3690, 990x, 995x ?
Recommend to open a ticket with MSI Tech Support & ask them. -
How far is the range of the Airport Extreme and how much does it boost your Internet speed?
We have a D-link wireless router, and it's worked fine for us, and covers the area around our house easily, but we have lots of other property too, though. I was wondering, what is the range of the Airport Extreme? Besides that, I've seen some communities that say the Airport Extreme is much faster than other routers, but since we have 1 MB per second Internet speed, would that affect speed much? I also was thinking about getting it because we have a USB printer that we'd like to use with our macs, but it would have to be integrated to our network. Our current router has a USB port on the back, but to connect, you have to use Shareport utility, and even then, you can only connect 1 device at a time. It would be nice to be able to convert the USB signal to a network signal.
Hi - it is impossible to know what you are asking without knowing the model of the Dlink - this chart might help you compare - http://www.smallnetbuilder.com/lanwan/router-charts/view - as far as the printer is concerned, the USB port on the Extreme is designed for printers and hard drives - they are recognized when plugged in and seen on your computer so they can be installed - there is no extra utility involved - if you use a powered USB hub you can connect more than one device at a time - http://www.apple.com/airportextreme/features/printing.html - and I recommend that if you decide to try the Extreme that you know what the return policy is in case it doesn't work out in your situation.
-
How can I restore the latest BIOS version when it doesn't appear in "Software & Drivers" page ?
When delivered, my brand new Pavilion desktop model 500-282ef was equipped with BIOS version 8014.
On the EFI\HP\Bios partition, only the \Current directory contained another version of the BIOS, an older one, namely version 8013. The \Previous and \New directories were both empty.
Experimenting with my new BIOS, I've unadvertently downgraded my BIOS version 8014 to version 8013.
Now, as you've probably guessed, I would like to restore the latest version
The EFI partition doesn't contain any installer to restore my BIOS to its former up to date version.
Unfortunately, "the drivers and update" page on HP support site does not provide any installer either.
I would be so grateful if some of the nice people here would ask HP to point me to such (probably unreleased) updater which should obviously exist.
I have saved a copy of my second Pavilion desktop BIOS using safawin.exe in the hope I could use it to achieve a restore. But I've been unable to use it to restore the latest BIOS as the restore process also requires a signature file.
Thank you very much for your help!Yes Dave, that's what I meant: during the "downgrade" from BIOS version 8013 to version 8014, no BIOS backup files were created and I couldn't found anything in any directory of the EFI partition.
In an attempt to solve the problem, I have put manually a copy of the BIOS (v 8014) from my second Pavilion Desktop (same model, same age) in the "\New" directory. That BIOS file was created with the safuwin.exe utility.
That has been a nice step forward: Now, from the Boot page, the Firmware Management offers me the update option ("You will update from 8013 to 8014, OK?") but when I try to so, I got a error message saying that a signature file should also be present along with the BIOS file to flash.
In the EFI\HP\BiosUpdate directory I do see some signature files like HpBiosUpdate.s14 and HpBiosUpdate32.s14 which could be the signature files I need, but I have no idea about how to use them (or maybe rename them?) to allow the procedure to complete successfully.
Concerning the warranty, do you suggest I should invoke it ? Could you please clarify ? Actually my PC has no other problem than this BIOS "downgrade".
I trust that HP has in store all the files I need, which have probably been used when configuring my PC in the factory. My problem is to have these files available in the "Software & Drivers" page on HP site...
Thank you very much for your help. I stay tuned
Twain -
Helllo! I have a question:
I have a MSI VIA KT4V MB with the latest BIOS version (04-08-09), and I wonder if this BIOS-version supports Barton XP 3000+ CPU?
Chassi: Chieftec Dragon Midi Tower
PSU: Antec True Power 480P (480W) | +5V/38A | +3,3V/30A | +12V/22A |
MB: MSI KT4 V (VIA KT400 chipset with BIOS v1.9)
Videocard: MSI Geforce 4 ti 4600 128MB
Soundcard: AC97 (integrated on MB)
NIC: Jensen PCI Fast Ethernet
CPU: AMD athlon XP Barton 2500+
RAM: 2 * 512MB Kingston PC-2700 (333 MHz FSB)
HD1: 1 * 120GB, 7200rpm, UATA100, 2 MB cache IBM deskstar
HD2: 1 * 120GB, 7200rpm, UATA100, 8 MB cache Western Digital
CD: 1 LG CD/RW 48x/16x/48x
DVD: 1 LG DVD RAM 8x (4081B)
Floppy: 1 st NoName
Monitor: 17" TFT Fujitsu/Siemens scaleo CTM7010
OS: Windows 2000 Advanced server (SP 4, directX 9.0b)
Keyboard: IBM (PS2)
Mouse: Logitech MX510 (optical)Bios version 1.B adds Sempron support. Your board supports the XP3000+ Barton with 333Mhz FSB only not 400Mhz. Details here.
-
I updated the IPAD with the latest update and now when I turned the IPAD on, I get the itunes logo and then nothing else. How can I fix this to let me use my IPAD?
YOU ARE IN RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
How come although iPads are getting more powerful, the iOS apps from apple are so mediocre and just not that great? We spend all this money for the latest ipad and all we get is these $5 video and music apps from apple. Why create the iOS platform and only offer so so apps like IMovie and GarageBand ? While other developers are offering much better apps like pinnacle studio for video, Cubasis and Auria for music production, apple has not showed much growth in terms of innovation. While there's nothing wrong with making an app like GarageBand where "anyone " can make a song, how about something for real musicians or an app not so basic as it get for video editing? After spending 0ver $700 on an ipad I'd be willing to spend more than $5 for a better video or audio app.
First, try a system reset although I can't give you any confidence. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
Error message when connecting to iTunes says my new iPad 4 can't be connected as it requires version 10.7 or later. Surely a new iPad already has the latest version, and if it doesn't how do I get it?
Not the iPad - your computer must be running iTunes 10.7 in order to sync. It has nothing to do with iTunes on the iPad.
You can download iTunes for your computer here.
http://www.apple.com/itunes/ -
How do I reinstall an older version of the software on my IPod touch? Installed the latest update and now it no longer works in my car.
I'm sorry, but Apple does not provide a downgrade path for iOS. Because downgrading is unsupported by Apple we cannot discuss it on these forums.
You may leave comments at Apple Feedback. -
I updated to the latest iOS and now YouTube and the Ap store are no longer on my phone. Also, not all my music will play and if I play a song it will actually play a different song while displaying the one I chose. Any ideas how to fix this?
You have to download the individual youtube app now. It is no longer a nataive ios app from apple in ios6
Maybe you are looking for
-
Create a Quotation from a Opportunity using the Follow up functionality
Hi! I'm new at the CRM and I'm trying to reproduce the standard scenario "Opportunity Management". Everithing is going well until i've reached the step to mantain the opportunity and create a quotation. I should do this through the Follow up button o
-
This post needs to go across a few forums but I will start here first. I have an 857W router which I want to replace my home ADSL router with. I can setup the ADSL / routing no problem but I am struggling to find a good resource on setting up the wir
-
Plesae Help me (Japanese problem)
Hi, I am developing a vocabulary trainer. The languages I want to support are German and Japanese. When I try to store Japanese characters in my mysql database, I do not get the correct characters. The entry of the field is "???" instead of the Japan
-
403 Error when access Table Storage using SAS token
I have Azure Mobile Service which has a custom API to generate a sas token for accessing Table Storage from Windows Store app. I get following error in Windows Store app while accessing table storage using sas token: Server failed to authenticate the
-
I do not get any error messages it just does not load. The status indicator will just keep going like it is trying to load but I never get anything. This is the only site I have problems with. we are behind a proxy server and I have a static IP addre