Msi x79a-gd45 plus and Dolby Digital Live

I bought a pair of Astro A50's to enjoy surround sound music and gaming. I have surround for music but with gaming you need Dolby Digital Live to get 5.1 or 7.1 surround sound with this headset. I have a msi x79a-gd45 plus, now does anyone know if DDL is compatible with my on-board sound card? Apparently you can download DDL for 5 dollars and I'd love to for the sake of surround gaming, but only if it actually works with my card.

Have you checked with the Realtek website for that application?

Similar Messages

  • MSI X79A-GD45 Plus Odd USB problems...

    I'm having some odd issues with my MSI X79A-GD45 Plus... The system overall works well, and other than these little nagging annoyances the machine works.
    I'm looking for any other suggestions you all might have of this issue.
    Every so often when I plug a device into the USB 3.0 ports the devices are not recognized. This ranges from flash drives to USB headsets. Rebooting the machine does not solve this. I have to shut down completely and cold boot to get the ports back up and running. It matters not if I use the front panel ports or the rear. All the while my keyboard and mouse which are in the rear USB 2.0 ports never fail to work.
    I am going to plug the front panel into the USB 2.0 headers on the mainboard just to test and see if I get the same results, I'm thinking that should tell me weather or not the motherboard or the front panel is the culprit.
    That aside any other suggestions would be very much appreciated. 
    One other thing and I am not sure if this is related to my issue... Most of the time when I boot the machine, the text for the POST messages are very large, like real zoomed in. If I go to the BIOS when this happens the BIOS is also way zoomed in and it is very slow/unresponsive. If I want to use the BIOS I have to restart the machine until I get the text normal looking, even then the BIOS seems kind of slow compared to my last MSI board (990FXA-GD80) which had this same type of click BIOS. This phenomena happened both with the BIOS the board came with and with the updated BIOS I installed to fix a sound issue.
    Again not sure if that has anything to do with the USB thing but I wanted to put that here just in case the issues are related.

    Try updating the NEC firmware:
    Quote
    USB 3.0
    • 1 USB 3.0 onboard connector by NEC® D720202
    • 2 USB 3.0 rear I/O ports by NEC® D720202
    http://www.station-drivers.com/index.php/articles/388-renesas-nec-upd72020x-usb-3-0-controller-firmware-version-2-0-2-4

  • No Sound from MSI X79A-GD45 Plus

    I have the MSI X79A-GD45 Plus. I've uninstalled the Realtek drivers and reinstalled them from the Mother Drivers CD and also downloaded one from the MSI website.
    Realtek Audio Manager shows speakers are plugged in and work but I hear no sound. I've tried working speakers and headphones.

    can you tell your current BIOS version?

  • MSI ramdisk MSI-X79A-GD45 plus motherboard

    I have MSI-X79A-GD45 plus motherboard and i have 64GB of ddr3-1600mhz rams.
    I want to boot windows 7 from ramdisk backup img using msi ramdisk. is it possible?
    when the boot loader of windows loads the ramdisk?
    I am designing a bootloader software for running windows on ramdisk.
    My strategy is
    I install my bootloader/disk enumerator to ssd or usb flash drive. disk enumerator shows old hdd and ssd drives.
    i install 64bits w7 os on ssd
    i install my usefull softwares to work(photoshop, maya etc)
    i create a 36 GB sytem image file without compression. its name is readyos.vhd
    i add an entry to my bootloader/disk enumerator when i power on my computer .
    bootloader> load readyos.vhd,ramdisk(0);
    boot;
    it loads vhd image to ramdisk and sytem goes on.
    when i restrart pc bootloader loads vhd and sytem runs but its frozen because i dont modify readyos.vhd file.
    whats msi thinking about this idea?

    You need to have WWindows running in order to use the RAMDisk application.  You cannot start the RAMDisk first.  You must start Windows first THEN load the RANDisk application. 
    AFAIK, it is not possible to do the opposite.
    Yogi

  • MSI X79A-GD45 PLUS advices for sli , thanks

    Hello I need some advice :
    1) if i buy the MSI X79A-GD45 PLUS that has 3 pci-express can i populate the first and the third slot with graphic card in sli configuration in order to have better air circulation ? the slots are 16,16,8 but the third use the same bus of the second so i don't know if leaving the second solt empty the third will rise to 16x Can you give me some info Thanks
    2) If the option above is not possible than cards that uses 2,5 slots of space like the gainward phantom will have enough space in sli with the first and second slot populated ? thanks in advance

    In the website it says..
    • 3 PCI Express gen3 x16 slots
    - PCI_E1 & PCI_E4 support up to PCIE 3.0 x16 speed
    - PCI_E6 supports up to PCIE 3.0 x 8 speed
    you could populate PCI_E1 and PCI_E6 also according to the manual..  it will be 16/8   

  • Help with X79A-GD45 Plus and missing Drivers

    Gday!
    Had to do a full wipe and I'm struggling to get all the system drivers back installed properly. I have been following a few other post here that had similar problems but their solutions don't seem to do it :(
    X79A-GD45 Plus Intel Core i7 4820K (3...

    Hi all,
    First of all I am new to the forum wheey
    Second of all, I have well a high-end gaming PC, and I just have a simple query?
    I currently have a 2-Way SLI with two MSI GTX 980 Gaming 4G, and I don't know whether or not to wait for the Vulkan API...

  • DTS connect and and Dolby Digital Live Authorization

    Hello forums,
    I recently purchased a X-Fi Titanium Fatal1ty Pro, but i have been unable to use the Dolby Digital Live and The DTS connect, when ever i click to activate them a message comes up in brackets saying "Licence is invalid". I never got a prompt to put in my code, and i don't have the application to do so. Is there anyway to do it online because I believe this is the root of the problem. I have re installed the drivers and all the creative applications but still no luck.
    I need this application to properly work my speakers please help.

    2 months, no reply. Bumping in hopes for one

  • MSI X79A-GD45 Plus no Post w. 4820K

    I have same problem with a x79-gd45 plus with the 4820 cpu. I rma the first one and the replacement board does the same thing. Blue leds on, no post. Current board s/n 601-7760-040b1303219906. Purchased from Fry's who wont touch it??? Also, on jpwr3 plug, is that an in or an out? Not real clear.
    Thanks
    8g patriot viper
    Cooler master 750w
    Evga gtx280
    Should also ask if anyone you know around here in So. O.C. Can do the flash if needed

    Flobelix, enough of this? Don't you dare speak to me like that! The fact your answers made no sense made me think there might be a language issue. It was not meant to be offensive. Nobody ever answered my other questions but keep saying contact MSI. I was looking for insight into the product not just a referral to MSI.  Either way, I have contacted MSI again. They have flashed the bios and it still does not work. So back to square one. Now I have a refurb mb that does not work and cannot be returned to the store where it was purchased.  Thanks for nothing.

  • Re: Need help overclocking X79A-GD45 Plus and i7-3820 - Stuck at 3.8ghz

    MSI selects only the best quality panel and discards unqualified ones.
    Selected panels are then gone through a process called pre-calibration, ensuring the color range is close to 100% sRGB.
    Therefore, on every Prestige series notebook, its panel deli...

    Quote from: badboy2k on Today at 05:31:55usually to change the multiplier use the + and - keys on your number pad to alter the ratio!
    Thanks.... From messing around in the bios everything else ...

  • MSI X79A-GD45 Plus - How to turn on Intel VT-x?

    Hey there guys,
    VMware is telling me that Intel VT-x is disabled but I can't for the life of me find the setting in the BIOS. This is what I get:
    I am looking thru the manual but I have not had any luck... If someone could help me find this setting that would be most awesome. 

    Look in the BIOS OC section, CPU Features sub section. I don't have the Intel datasheet handy for the CPU you have, so I can't confirm what VT features it incorporates.
    Added: With some boards, with a supported CPU of a specific feature, it may be enabled simply be default. If no applicable setting is found, that could be the situation.

  • X79A-GD45 Plus refuses manual voltage overclock?

    Hello everyone, I registered over here to ask this question and see if anyone else is having the same issue.
    I currently have an i7 3930k installed in my GD45 Plus, I bought the board for its reasonable price and 8-DIMM support. I was pretty happy with it until I discovered this "issue".
    Leaving most settings on auto and using the Turbo+Vdroop method (C'mon MSI, would it kill you to add offset overclocking?), 87.5% Vdroop control and +250 on the core override voltage I am able to stress test for 30 minutes to an hour at 4.6ghz before crashing, the CPU is just at the very edge of stability. Load voltage settles around 1.364V with this setup, which is very very low for SB-E chip at that clock speed.
    However, if I disable turbo and run a manual clock of 4600mhz things change. All power savings shut off, SA voltage at 1.300V, basically everything opened up as far as power limit/duration settings. It boots to windows fine, but immediately upon loading the CPU the system shuts off and reboots after a few seconds. I tried 4600 at 1.375V... then 1.400V... then 1.450V, all the way up to 1.550V and it has the same effect.
    Then I wondered what it would do at stock, sure enough even at 3200mhz stock with a manual voltage the board shuts off immediately once the CPU is loaded up with Prime 95 or IBT.
    I am using BIOS revision 17.3, and am about to attempt to downgrade to a previous version to see if that has any effect.
    Does anyone have any idea what might be wrong with this thing? This is incredibly disappointing, as I had a very good experience with the X79MA-GD45 mATX board. What is even more disappointing is my garbage (literally the worst board I have ever owned, bar none) ECS X79R-AX Deluxe that doesn't even have a VRM heatsink and needs the BIOS jumper in the reset position to even boot will run the same exact CPU as I am using in the Plus at 4.8ghz all day every day. Really want to get this board working properly as I like everything else about it.
    System specs, just in case:
    -C2 Stepping i7 3930k w/H100i
    -MSI X79A-GD45 Plus
    -32GB G-skill DDR3 1600 CAS8
    -2x MSI HD7950 TFIII
    -Cooler Master V1000 PSU
    -Samsung 830 128GB SSD
    -Windows 7 Pro 64 bit

    Quote from: PirateDog on 07-September-13, 11:54:22
    MSI X58's had it, and it now has a big time presence in the Z87 lineup.
    I haven't tried the Z87 boards yet from MSI (Used several Gigabytes and Asus though) but I'm glad to hear they listened. That was what prompted me to get rid of my Z77 MPower, I had a 5.2ghz capable chip but I did not want to run it there 24/7.
    Quote
    For an everyday machine, industry recognized suggested limit for Sandy-E CPU is 1.350v's. Use the Turbo OC method on Auto CPU V., EIST and C1E enabled. Enhanced Turbo enabled, and VDroop at 100%. Internal PLL Overvolting set to enable. Might have to increase SA, I/O, and PLL V. some. Are the settings in CPU Features increased? Overspeed Protection disabled? Get what you can out of it and that is about all you can expect. G45's aren't known as good OC'ers like GD65(8D's) or Big Bang XPower II's!
    I've gone through literally everything. This is not my first time doing this, and I know good overclocks are possible on a GD45 board as I've done it before with arguably the worst of the bunch. I'm not bugged about voltage, I prefer to stay under 1.500V if possible and would only push past that for quick bench runs.
    Quote
    Just asked an uncle what his 3930k C2 runs 46X Turbo OC, VDroop 100% at, and his under IBT will hit 1.384v's peak, and it is perfectly stable with 16GB RAM at 2400.
    Don't recommend to go down too far to a UEFI/BIOS with ME 7 FW once ME 8 FW has been installed, or you may create all kinds of HECI mismatch problems. If no crashes or BSOD's, other than when stressing with Prime or IBT, no problems in everyday work, applications, or programs, use it and not sweat the small stuff. 
    I did some more experimenting, and I think the BIOS might be incorrectly reporting the voltage. I found that I can run 4400mhz at only 1.150V and 4600mhz at 1.200V, there is no way a 3930k with a 1.341V VID is overclocking by 1000+ mhz undervolted like that. It would make sense, if it was about 0.200V off then running 1.400V would actually be 1.600V and even with the power settings tweaked it would instantly shut down unless I was sub-zero, probably due to the VRM's hitting the 130* thermal protection. I can't think of any other reason it could be behaving like this.

  • X79A-GD45 Plus (NO POST. NO VIDEO)

    Hello, everyone!
    I have recently purchased a new MSI X79A-GD45 Plus "military class 3" motherboard, and can not seem to get it to post. Everything turns on. Fans spin. Pretty blue LEDs all over.. none of which appear to be warning or error lights. Nice whirring sound, then tick as hard disk powers on. However, there is no beep when I attach a speaker, and no display coming in over the monitor.
    Does anything stand out about my setup that could cause some sort of weird behavior? I've double-tested the CPU and RAM as working in a friends machine running a board from another brand. I've also tried another known-working (450 watts) PSU and another known-working graphics card that doesn't require additional power from the PSU.
    NZXT Source 530 full-size case
    Corsair HX750 PSU
    GSkill Ripjaws Z DDR3-2133 PC3-17000 2048MB x 4
    Intel I7 3820 Sandy Bridge CPU
    Enermax ETS 240 Heatsink/fan
    Nvidia Gforce 450 OC
    Any help would be greatly appreciated.

    OK, I'm finally back with a report and some pictures.
    Quote from: Froggy Gremlin on 22-March-14, 04:03:40
    The CPU 'is' supported with initial release BIOS for that model mainboard. I don't believe BIOS version is the problem.
    If it's a multi +12V rail 450W PSU it can still be problematic. There may not be enough amps on the individual rails. If at all possible, locate a single rail +12V PSU to test with. 500W with around 30 or more +12v AMPS on it's rail.
    Added: Are you sure the CPU ATX/EPS 8-pin power connection from the PSU to the mainboard is fully locking into place?
    2nd Add: Will your Corsair PSU power up your friends or another system?
    The other power supply I ended up trying to use the day of my last post was some random brand 550W that didn't have a proper hookup for the video card and may or may not have worked in the first place. So, that was ruled out.
    Instead, my friend unhooked his even fancier Corsair and we plugged it to my setup with and without the additional molex for the video card slots. Same result. 
    I've attached some pictures of my setup and the state of the LEDs on the board when it is running. My GTS 450 isn't pictured here. It was used that day to test, but then we put in one of his known working cards for further testing.
    Neither him or I are novices at this by any means. We've been building our own setups for years. But this is the strangest situation either of us have ever encountered. I'm now reduced to wondering about the most random of problems. Is this huge heatsink causing a problem? I've never used one this big before. Did I use the wrong motherboard screws? My case came with a huge assortment of black screws and the ones I ended up using fit easily and screwed all the way into the mount risers. Could it be that I have the worst luck in the world and have actually board 3 bad motherboards in a row from two different brands.
    I'm starting to really worry here as I'm running out of ideas and time to return things.
    Quote from: Mummy on 22-March-14, 04:31:19
    There is fan connected to "CPUfan" pins on MB rigth? ..and its the kind that has working RPM pickup. so Mb can see it spins.
    Yes, it is connected. See pictures below.

  • How do I get Dolby digital live or DTS connect to work?

    I have the sound blaster Zx sound card and the logitech z906 5.1 surround speaker system. I am connecting to the speakers via optical cable. I figured Dolby digital live and/or DTS would sound great with this set up, only problem when I turn on either of those my speakers go silent. I set Speakers: Soundblaster Z as my default playback device but other than that I am not sure what I need to do to get it to work.
    Bruce

    I have the z 906 speakers, not the Z-5500 in your link. The manual I already have says the z906 speakers automatically detect the digital signal. I figured the Sound Blaster card would convert an analog signal to digital since it is going into the speakers through the Optical cable, I guess I was wrong.
    I have read the link about digital connections on these forums along with the notice in the cinematic tab in the Sound Blaster control panel. I believe they are both saying that I will not be able to use my music player (windows media player) in conjunction with the Dolby DTS and Dolby Digital Live, is this true?
    If so then is the only way to listen to the DTS or digital Live effects is through a DVD or Blu ray disc encoded for either of those effects?
    If this is true how do I test my dolby digital outputs to make sure they are working correctly?
    Bruce

  • Does MSI 990FXA-GD80 support Dolby Digital Live?

    I need to output DD5.1 to a Turtle Beach Earforce DSS decoder. It know that some realtek-equipped motherboards can encode to DD Live do this but I don't have the option for DD Live in the Realtek Sound Manager under Supported Formats, nor in Windows sound properties under Advanced, although under Supported Formats it does show Dolby Digital (not Live) ticked.
    So is it possible to do this or will I need to buy another soundcard?

    Quote from: debounced on 27-January-13, 10:40:17
    Hello,
    I purchased a mini to TOSLINK optical cable to connect my GT70 0NC to my Logitech Z-5500 5.1 speaker system and I was wondering if the ALC892 supports Dolby Digital Live. I'm able to get DTS and Dolby Digital to work just fine, but I don't see an option to change the default format of the digital output in the Realtek HD Audio Manager to Dolby Digital Live. I'm running Windows 7 64 bit with the latest audio drivers available.
    Thanks
    I hate saying this.
    Do yourself a favor, go buy an Asus Xonar U3, plug it in, and you will be much happier.
    I have a Z680 (precursor to the Z5500, pretty much the same thing though), and I couldn't stand how bad the Realtek HD performed. The Asus Xonar does a much better job. You hook it up, set it to output to the 'speakers', but have your TOSLINK cable connected, and you get upconverted dolby digital live sound output. Couldn't ask for anything better. The U3 only runs about $40, so it's not a huge investment.

  • Digital Connections, SPDIF and Dolby Digital Info

    I have noticed that many people have problems using their digital connections, so I put together this info to try and explain the difference between digital and analogue, and how to use them.
    Digital ConnectionsDigital connections come in two standard forms, optical and coax. They both give you exactly the same result, the only difference is the medium (material) through which the signal travels. The thing to remember about digital is that for ordinary, uncompressed sound, it will only carry a stereo signal. So, if you like to use CMSS with your music, or you try the speaker test function, optical/coax is useless as you only hear the front left/right speakers.
    Movies wth Dolby Digital (AC3) & DTSMovies on DVD often use encoded audio in the form of Dolby Digital (AC3) or DTS. This means that all 6 channels are compressed into a single stream of digital data. A decoder is required to extract the channels and send the sound to the correct speakers. There are three ways to do this.
    ) Pass the AC3/DTS signal to a external decoder. This is where your optical/coax connection is used. To go down this route, you must first have a set of speakers or a decoder that supports Dolby Digital. In your DVD software, select 'SPDIF' as the audio output method and 'SPDIF Pass-through' in your soundcard options. What this does is tells both the software and soundcard to leave the audio from the DVD in compressed form and send it straight through the digital outputs. Your digital speakers/receiver will do all the decoding to give you full surround sound. Please note that this is the only way to get 6 channels through an optical/coax cable.
    2) Decode the AC3/DTS with your Sound Blaster.You should choose this option if you don't have an external decoder. In the DVD software, select 'SPDIF' as the audio output method and make sure that 'SPDIF Pass-through' in the souncard options is off. The DVD software will now pass the compressed audio to your soundcard, which will then decode the data. The soundcard will output the 6 channels using the analogue connections (or digital DIN, more on this later). If you try to use a digital optical/coax connection to your speakers, you will only hear faint sounds from the front left/right speakers.
    3) Decode the AC3/DTS with software.If you have a soundcard that doesn't support Dolby Digital (like the SB Li've! 24-bit) and you don't have digital speakers, the only way for you to get surround sound in movies is to use software to decode the AC3/DTS. The free versions of DVD software you get with hardware often don't support this feature, you will most likely need a full version. First select 'Dolby Digital' or 'DTS' decoding in the DVD software audio options (you must select the right sound format for the movie you are watching). Then make sure that 'SPDIF Pass-through' in the soundcard options is off. As with method (2) you must connect your speakers with the 3 analogue cables, not optical/coax.
    PC GamesPC games usually use technologies like as EAX to create surround sound, not Dolby Digital. So even if your speaker system has a Dolby Digital decoder, it will be of no use when playing games. The EAX processing is done on the soundcard, and the 6-channel sound is output via the analogue (or digital DIN if available). So you still need analogue connections to your digital speakers for games, if you just use an optical/coax cable you will only get the front left/right sound.(N.B. X-Box games do support Dolby Digital, so if you connect your X-Box to your Dolby Digital receiver/speakers with the optical cable, you can get full surround sound.)
    Creative's 4-pole mini-jack & Digital DINYou can only get the full use out of this connection when used between Creative Sound Blasters and compatible Creative speaker systems. It is the digital equivalent of the analogue connections, but instead of using 3 stereo sockets, you use just one digital socket. There are 4 conducting connections in the socket (unlike coax which has two) so there are enough connections to carry 3 different digital stereo signals (front R/L, rear R/L and Sub/Centre). You will probably require a 4-pole mini-jack > DIN converter to connect your Creative speakers to this socket. Using this connection will allow you to get surround from games (unlike SPDIF). However the digital DIN input on some Creative speakers can't receive AC3/DTS data, so you may still require an optical/coax connection.
    N.B. This digital socket on the Sound Blaster cards doubles as the digital coax output. If you don't have digital DIN, you can use a mono or stereo mini-jack > RCA converter to connect to the coax input on your speakers, as the front R/L or AC3/DTS signals are sent through the tip of the plug.
    More InfoCreative's Speaker Conectivity Guide: http://support.creative.com/kb/ShowA....aspx?sid=5035
    Dolby Surround info: http://www.dolby.com
    I hope that clarifies the issue .
    Message Edited by KokChoy-CL on 07-04-2008 :0 AM

    Digital Connections, SPDIF and Dolby Digital (german revision)
    Options
    03-08-2007 01:52 AM
    Digital Connections, SPDIF and Dolby Digital Info
    Übersetzung + Erweiterungen + Revision 03-08-07
    Der Digitale Anschluß
    Ich habe beobachtet, daß viele Leute Fragen zu den Sound-Anschlüssen haben, daher trage ich hier einige Infos zusammen und erkläre die Unterschiede in der Verwendung der digitalen und analogen Anschlüsse.
    Digitale Anschlüsse – S-PDIF & Toslink
    Am PC gibt es zwei häufig verwendete digitale Anschlußformate optisch (Toslink) und koaxial (S-PDIF).
    Im Prinzip erzielen beide Anschlüsse genau das gleiche Audio-Ergebnis.
    Der primäre Unterschied ist das Medium ( das Material ) durch das das Signal übertragen wird. ( Glasfaser oder Kupfer )
    !! Update !!
    Ein wichtiger Aspekt in der Auswahl von digital-optischen Anschlüssen erklärt sich durch das Vermeiden einer sogenannten „Brummschleife“, d.h. eine elektrisch leitende Verbindung zweier Geräte muß vermieden werden.
    ( mit Lichtwellenleiter - LWL- z.B. mit dem Anschluß-System Toslink )
    In der Elektrotechnik ( Niedervolttechnik ) wird oft der „Negative“ Pol der Spannungsversorgung über das elektrisch leitende Gehäuse ( die sogenannte Masse )geführt. Das spart einerseits einen weiteren Kabelweg ( also Kupfer ) ein und ergibt eine mehr oder weniger wirksame (Ab-) Schirmung. Diese Schirmung soll die elektronische Schaltung vor elektromagnetischen, hochfrequenten und niederfrequenten Störeinflüssen je nach Ausführung der Schirmung schützen.
    Üblicherweise besitzt jedes elektronische Gerät eine eigene Spannungsversorgung. Netzteile in elektronischen Geräten unterscheiden sich in der Art der Spannungsumformung, in der Höhe der Spannung, in der zur Verfügung gestellten Leistung, durch verschiedene Bauarten und unterschiedliche Bauteil-Tolleranzen entstehen somit verschiedenste Masse-Potentiale.
    Werden solche Geräte durch elektrisch leitende Kabel verbunden, kommt es zu einem Ausgleich der verschiedenen Masse-Potentiale. Ein negatives Ergebnis der Verbindung von TV-Geräten oder PC-Komponenten mit Audio-Komponenten ist oft eine hörbare Beeinträchtigung von Audio-Signalen - ein tieffrequentes Brummen.( auch Brummschleife oder Masseschleife genannt )
    Hierfür verantwortlich zu machen ist eine elektrisch leitende Verbindung. In der HiFi-Technik ist das in der Regel ein Koaxialkabel und dessen Schirmung.
    Vermeidung u. Reduzierung dieser Störgeräusche Ansätze
    !! Der einfache Weg !!
    Einsatz einer optischen Signal- / Datenübertragung mit Lichtwellenleiter
    - Glasfaser als Trägermaterial
    ( Einsatz einer Datenübertragung ohne elektrisch leitende Verbindungen )
    aufwendige Wege
    Einsatz einer Galvanischen Trennung - mit einem Ground-Isolator
    (Massetrennung )
    + die elektrische Verbindung der Schirmung wird umgangen
    - aber Leistungs- & und Klangverlust(geringere Dynamik)
    - Verwendung von ( hochwertigen ) symmetrischen Verbindungen
    ( „PLUS“ „MINUS“ „Masse“)
    + Trennung der Schirmung an einer „Seite“ des Kabels möglich
    [bei Koaxialkabel unsinnig weil eine Ader zerstört wird und
    anschließend dieses Kabel wertlos ist ]
    - sehr große Anschlüsse
    - Profibereich
    - Einsatz einer zentralen Spannungsversorgung für alle miteinander
    verbundenen Geräte
    Nachtrag
    Bitte nicht verwechseln mit Netzbrummen - die Einstreuung der Netzfrequenz 50 Hz ( EU ) oder 60 Hz ( US ) in den Audio-Signalweg das ist üblicherweise auf eine nicht ausreichende Entstörung oder(Ab-)Schirmung zurückzuführen ist.
    - End - !! Update !!
    Einige Vorbetrachtungen
    Die traditionelle Ton-Übertragung ist ein unkomprimiertes Signal, es wird in Stereo übertragen.
    Wenn du CMSS ( Creative Multi Speaker Surround simulierten Surround Sound ) aus deiner Stereo-Musik erzeugen willst oder der Sprach-Test abgerufen wird ( nur über den Center ) ist der digitale Anschluß ( optisch & koaxial ) unbrauchbar, denn es würden nur die Lautsprecher Front-Rechts und Front-Links angesprochen !! Es wird ein anderer Anschluß benötigt, der die Kanäle einzeln ansteuert.
    Für das Format 5.1 ist das die Verbindung über die drei 3,5 mm Klinken-Stecker ( 3 mal 2 Kanäle ) mit der folgenden
    Kanalzuweisung 5.1
    Front R / Front L + Rear R + Rear L + Subwoofer / Center
    Mehrkanalton in Filmen - DolbyDigital (AC3 / DD) oder DTS
    Filme auf DVD verwenden häufig ein kodiertes Mehrkanal-Audiosignal, in der Form DolbyDigital ( AC3 / DD ) oder DTS. Bei dem gebräuchlichsten Format 5.1 werden 6 Signale ( 3 mal 2 Kanäle ) in einem digitalen Datenstrom zusammengefaßt und komprimiert = das Kodieren.
    Nach der Übertragung des Signals muß aus diesem Datenstrom ein Decoder die entsprechenden Töne trennen und jedem Kanal zuordnen = das Dekodieren.
    Drei Varianten der Decodierung sind möglich.
    (1) - AC3 / DTS Signal wird zu einem externen Decoder geführt
    Genau hier wird der optische / koaxiale Anschluß genutzt. Um diese Variante nutzen zu können, mußt du ein digitales Lautsprecher-Set oder einen Digital-Decoder ( z.B: Digital-Receiver ) besitzen, der die Dekodierung des gewünschten Formats ( DD, AC3, DTS) übernimmt. Für jedes Digital-Format benötigt man einen entsprechenden Decoder – das Handbuch weiß hier oft mehr – welches Format von welchem Gerät dekodiert werden kann !!
    Wähle in deiner DVD-Software den zur digitalen Datenübertragung gewünschten Anschluß "S-PDIF"( Koaxial ) oder "Optisch" als Audio-Ausgang.
    In den Soundkarten-Einstellungen muß die Option "S-PDIF-Durchschleifen" ( "SPDIF Pass-through" ) eingestellt werden.
    Dadurch wird das Audio-Signal von der DVD in digitaler ( komprimierter ) Form direkt an die Digital-Ausgänge der Soundkarte weitergeleitet. Anschließend kann ein angeschlossener externer Decoder z.B. im digitalen Lautsprecher-System oder im Digital-Receiver die Decodierung übernehmen und es entsteht ein „Räumliches Klangbild“.
    Bitte merken:
    Daß ist der einzige Weg 5.1 Signale ( digital ) über ein koaxiales bzw. optisches Kabel zu übertragen.
    (2) - AC3 / DTS mit der Soundkarte decodieren
    Diese Variante ist zu verwenden, wenn du keinen externen Decoder / Receiver verwenden willst.
    In der DVD-Software wird "S-PDIF" als Audio-Ausgang gewählt und es muß zwingend in den Optionen der Soundkarte "S-PDIF-Durchschleifen" ( "SPDIF Pass-through" ) deaktiviert werden.
    Die DVD-Software wird jetzt das ( digitale ) komprimierte Audio-Signal an deine Soundkarte senden und dann werden dort die digitalen Daten decodiert. Die Soundkarte gibt dann die 6 Audio-Kanäle ( bei 5.1 ) über ihre drei analogen Anschlüsse aus ( 3 mal 3,5 mm Klinke ) mit folgender
    Kanalzuweisung 5.1
    Front R / Front L + Rear R + Rear L + Subwoofer / Center
    Es wird in diesem Beispiel also ein 5.1-Lautsprecher-System benötigt, mit der analogen Anschluß-Option von drei Klinken-Steckern.
    ( also 3 x 2 Kanäle = 3 mal 3,5 mm Klinke )
    - die Einspeisung eines digitalen Signals über DigitalDIN, ist mit dem optionalen digitalen E/A-Modulbei möglich ***
    - wird hier ein optisches / koaxiales Kabel verwendest, hörst du nur schwache Töne der Front-Lautsprecher R + L
    *** Bei Karten der SB073X-Serie verfügt diese Buchse nicht über die Digital-In-Funktion !! zur Unterstützung des digitalen E/A-Moduls )
    [ mehr unten ]
    (3) - AC3 / DTS mit einer Software decodieren
    Wenn deine Soundkarte kein DolbyDigital unterstützt
    ( wie die SB Live! 24-bit ) und auch kein digitales Lautsprecher-System vorhanden ist, kannst du Raumklang
    (Surrsound-Sound ) aus DV-Filmen auch über eine AC3 / DTS fähige Software erzeugen.
    Gratis-DVD-Software-Versionen unterstützen diese Funktion häufig nicht, du benötigst dann eine Software-Voll-Version.
    Wähle die gewünschte digitale Audio-Tonspur „DolbyDigital“ oder „DTS“, im Audio-Menü einer DVD.
    Dann stelle sicher, das in den Soundkarten-Optionen "S-PDIF-Durchschleifen"
    ( "SPDIF Pass-through" ) ausgeschaltet ist.
    Wie unter (2) mußt du deine Lautsprecher mit den drei analogen Kabeln anschließen und nicht optisch oder koaxial !! ( 3 mal 3,5 Klinke )
    Kanalzuweisung 5.1
    Front R / Front L + Rear R + Rear L + Subwoofer / Center
    Generell sind bei zuvor genannten Varianten (1) – (3) auch andere mehrkanalige
    Wiedergabeformate möglich.
    In Abhängigkeit von der Ausstattung der Quelle also von der DVD. der CD. der TV-Karte, dem Game usw. sind andere Formate z.B. 2.0 / 2.1 / 4.0 / 4.1 / 5.1 / 7.1-Kanal Wiedergabe möglich.
    PC Spiele
    PC Spiele nutzen normalerweise Technologien wie EAX, die ihren eigenen Surround-Sound, ohne Verwendung von DolbyDigital erzeugen. Selbst wenn dein Lautsprecher-System einen DolbyDigital-Decoder besitzt, ist dieser für Games unbrauchbar. Denn die EAX Verarbeitung findet direkt auf der Soundkarte statt und die Ausgabe der 6 Kanäle ( 5.1 ) erfolgt über die analogen Ausgänge
    ( 3 mal 3,5 mm Klinke ) ( oder über DigitalDIN, wenn vorhanden *** ).
    *** Bei Karten der SB073X-Serie verfügt diese Buchse nicht über die Digital-In-Funktion !! zur Unterstützung des digitalen E/A-Moduls ) [ mehr unten ]
    Kanalzuweisung 5.1
    Front R / Front L + Rear R + Rear L + Subwoofer / Center
    Für Mehrkanalwiedergabe in Spielen benötigst du also Lautsprecher-Systeme mit analogen Anschlüssen oder einen Digital-Receiver mit analogem ( 5.1 ) Eingang.
    Wenn du ein optisches / koaxiales Kabel verwendest, dann kannst du nur die vorderen Kanäle ( links / rechts ) hören.
    !!! Notiz !!!
    X-Box Spiele unterstützen DolbyDigital, wenn du deine X-Box mit einem DolbyDigital-Receiver oder einem digitalen Lautsprecher-System über optische Kabel verbindest, kannst du den vollen Surround Sound nutzen.
    Die Sound Blaster Karten der SB073X-Serie bieten neben dem digitalen ( koaxial / extern ) Anschluß über den Anschluss Flexi-Jack auch noch einen weiteren Anschluß, direkt auf der Karte ( koaxial / intern )
    Flexi-Jack - DigitalDIN
    Wenn du kein digitales E/A-Modul ( Digital I/O-Modul ) benutzen kannst, ist es möglich mit einem Klinke-Chinch Adapter ( RCA-Adapter ), ein digitales Lautsprecher-System oder einen Digital-Receiver digital ( koaxial ) über den Flexi-Jack-Ausgang der Soundkarte zu verbinden. Alle MiniDin bzw. 3,5 mm Klinken-Stecker können in der Mono- oder auch in der Stereo-Ausführung verwendet werden, denn der mittlere / vordere Pin des 3,5 mm Klinken-Steckers überträgt das AC3 / DTS Signal. Dazu benötigt man eine der folgenden Verbindungen
    3,5 mm Klinke ( Mini DIN ) auf Chinch - Adapter ( RCA-Adapter )
    für den S-PDIF-Anschluß( koaxial ) an Lautsprecher-Systeme mit digitalem Eingang bzw. Digital-Receiver kann man folgende Varianten verwenden
    - Klinke-Mono - Chinch-Stecker ( Stecker –Stecker ) ( Favorit !! )
    - Klinke-Mono auf Chinch-Mono ( Stecker - Kupplung ) + Chinch-Verbindungkabel
    ( Stecker - Stecker )
    - Klinke-Stereo auf Chinch-Mono ( Stecker - Kupplung ) + Chinch-Verbindungkabel
    ( Stecker - Stecker )
    Das digitale E/A-Modul ( Digital I/O – Modul )
    Die Verwendung von optionalem Zubehör Digitales E/A-Modul ( Digital I/O-Modul ) bietet die Möglichkeit der direkten Verwendung eines S-PDIF Verbindungskabels und stellt zusätzlich zum koaxialen Anschluß einen optischen Anschluß ( Toslink ) bereit. Die optische Verbindung kann wie oben beschrieben zur Vermeidung einer Brummschleife hilfreich sein.
    Des weiteren wird ( abhängig von der Ausstattung der Soundkarte *** ) ein digitaler Eingang über das E/A-Modul bereitgestellt, der Eingang ist ebenso wie der Ausgang in optischer ( Toslink ) und koaxialer ( S-PDIF ) Bauform ausgeführt.
    Achtung !!
    ( *** Bei Karten der SB073X-Serie verfügt diese Buchse nicht über die Digital-In-Funktion !! zur Unterstützung des digitalen E/A-Moduls )
    interner S-PDIF E/A-Anschluss ( für Geräte der SB073X-Serie )
    zum Anschluß einer Decoderkarte oder externer Decoder bzw. Lautsprechersysteme mit digitalem Eingang ist ein entsprechender Adapter erforderlich
    Bei einigen Modellen ist eine Dekoderkarte im Lieferumfang enthalten bzw. in einigen Regionen als Zubehör erhältlich
    Front Panel-Sockel (für Geräte der SB073X-Serie)
    2 x 5-poliger Front Panel-Sockel nur für Verbindungen mit einem Intel HD Front Panel Audio-Standardsockel (nur Geräte der SB073X-Serie) Intel Front Panel Audio-Kabels (separat erhältlich)
    Anschlusskompatibilität
    Ausschließlich Intel HD Front Panel Audio-Standard
    Nicht kompatibel mit AC97 oder Intel-kompatiblem HD Front Panel Audio
    Einschränkungen
    Wenn neben den hinteren Mikrofonen auch Frontmikrofone angeschlossen sind, werden die hinteren Mikrofone automatisch deaktiviert.
    Sound Blaster X-Fi E/A-Konsole
    Auf der Rückseite Ihrer X-Fi-E/A-Konsole* befindet sich eine sogenannte DIN-Buchse. Um die Funktionen für eine integrierte Lautsprechersteuerung zu nutzen, können Sie an diese Buchse ausgewählte analoge Creative-Lautsprechersysteme anschließen, die über eine Kabelfernbedienung oder eine Audiokonsole verfügen.
    So können Sie beispielsweise über den Master-Lautstärkeregler Ihrer X-Fi-E/A-Konsole die Lautstärke der Lautsprecher regeln oder die Lautsprecher stummschalten.
    -eof-

Maybe you are looking for