Msi x99s gaming 9 ack problem

hello I have just updated my bios form 2.20 to 2.40 went smooth ish bios flash went fine cleared cmos after and re did bios settings not to the problem I cant get my Bluetooth or wireless to show up in the device manager. I have uninstalled all the killer network stuff/quailcom. and reinstalled killer the software but still nothing. no device in device manager apart from one showing as unknow usb device(device description request failed) could this be my wireless would this show up under usb and if it is how do I get it back. thanks in advance

Hello svet I have figured out the problem just came to me. But think it needs posting some where just in case anyone else has this issue when installing drivers make sure you install the killer wireless and Bluetooth first before the asmedia usb host controller driver. Or the asmedia will put it down as a usb device

Similar Messages

  • Msi x99 gaming 9 ack problems

    ok got my new msi x99 gaming 9 ack with i7 5930k and g.skill 2400 ram
    got my corsair ax1200i
    so my problems i have been working on this all night near enough but today we have progress.
    so problem is when i put ram in slot 1 would not post debug 04/55/60 no keyboard or signal to monitor. so i have finally got it working and got into the bios by put just one stick in slot 5. tried all 4 sticks in slot 5 but one failed at 6f so i think now one stick is faulty. but back to main problem with slot one.
    once i had it booting up i switched off system and added 1 stick in slot one.
    and it would not post debug 04/55/60.
    so do i ram it or do you think bios update will fix this problem thanks in advance

    Last night the exact same problem occurred to my Gaming 9 ACK.
    Board worked flawlessly for three months with a 5960X processor, quad channel G.Skill 3.33 memory ( 16gb- 4x4 ) and four msi GTX980 gaming in quad sli mode.
    Turned off the pc last night, and today, upon start the pc did not boot.
    04-55-60-04 and all over again.
    Memory modules are populated in slots 1-3-5-7. After several try and error efforts, slot 7 is blocking the system from booting. All four modules checked and are fine.
    Removed module in slot 7 and booted. No problem there.
    After entering windows 7 environment, a second even bigger surprise surfaced.
    NO SLI. Device manager sees only gtx980 in slot 1 and nothing else.
    New tests.
    Only pci-e slot 1 works. All others are non functional.
    So I am with an 8000$ pc, which works with 12gb triple channel memory and one VGA.
    Obviously motherboard has gone south.
    What now ???

  • Msi x99 gaming 9 ack does not detect capture card when using with xsplit

    msi x99 gaming 9 ack does not detect capture card when using with xsplit
    i install every but still it does not work.

    Hi
    It wasn't hard to find your motherboard version:
    http://www.msi.com/support/mb/Z68AGD80_B3.html#down-bios
    Since your BIOS is v20.1, it couldn't be G3 
    Apart from checking BIOS, you can only check motherboard or moth...

  • MSI Z97 Gaming 9 ACK problem with wifi (lag spike)

    hi all,
    the problem is that all is well connected to the ethernet (killer 2205).
    while on wifi I have many lag spike when i play online game.
    I got a laptop with similar wifi card (killer 1202) and all went good!!
    so why with killer 1525 on desktop i got this lag spike? its very bad.
    the network driver is the newset
    my system:
    windows 7 64bit
    msi z97 gaming 9 ack
    i7 4790k
    16gb ddr3 2133mhz
    msi gtx 970oc
    seasonic 860 platinum

    Quote from: darkhawk on 17-June-15, 18:01:01
    I'd be more for RMA'ing the board.
    But personally, I'm staying away from Killer Network products from now on. They are buggy and do not work very well when they don't work. Sometimes they don't work at all. Check back through these forums, and one of the biggest issues with any of the boards and/or laptops is always the Killer Networks NIC's. And there is no simple and easy fix for many of the issues.
    If it was me, I'd buy a nice wireless card and use that instead. Or do the Intel mod you posted about.
    I won't say that the Killer Networks device SHOULD work, but time and time again they prove to not work. In that case, I'd replace it with something that will and move on. A $40 wireless card to not spend days or weeks trying to fix the problem is money well spent in my opinion.
    now im going with powerlink and all went good, but as all know, powerlink after 2 years will broke and need to replace..... but online game with eth is always better.
    So im tihink to resend to AMAZON and ask for refund and ill rebuy a gaming 7 without wifi this change refund me a good 100 euro......

  • Re: MSI X99S Gaming 9 ACK partial sound problem

    Thank you for answering! Do you know if there is any other way/slot for the audio card? could i run PCI cable(if that exists) from the PCI slot to the audio card so it wouldn't be in the spot between the slots? I don't mind if i have to run the card ou...

    Dealing with static/white noise from speakers during games. Uninstalling and reinstalling all audio related drivers to eliminate that as the culprit but not sure what to DL. There's Sound Blaster Cinema AP and EQ driver here: http://www.msi.com/support...

  • Re: Msi x99s gaming 9 ack wireless problem

    Quote from: abanjosoccer on 19-October-14, 23:03:52I'm also hearing a weird clicking noise every so often. It seems to come from the bottom right hand side of the laptop when facing the keyboard top-down. Like, to the r...

    Quote from: HenryW on Yesterday at 00:09:33 (B3) BIOS update to 20.0/20.1 version is for Ivy, 17.5 and earlier is for Sandy. With the Ivy BIOS it should take the same CPUs as the P67A-GD80 (B3)
    http://us.msi.com/suppo...

  • Msi x99s gaming 9 ack wireless problem

    Ok so this motherboard is working great except for the wireless.
    I had everything working great then the other week I got a m.2 set it up as boot drive.
    Now up till then the wireless worked great but now when I reinstalled got everything in stalled and working. The wireless was working then one day it came up as usb device in device manager and device manager was saying there was a problem. I tried pointing windows to the drivers for it but windows says its up to date. It has done this twice now 1st time I uninstalled usb controller drivers and managed to fix it then reinstalled usb controllers. But now when I remove usb controllers windows just puts its own there. So I am stumped also when this happens the wireless vanishes in bios board explorer. Any one help with this thanks

    Also I know it's not faulty device it's just driver and windows issue. Sorry if this looks messy using my phone

  • Re: MSI X99S GAMING 9 ACK wifi drivers issue

    I had this problem with mine it's real pain I uninstalled all usb hub drivers to get mine to recognise it but it was a case of keep on trying to install till it takes its drivers. I also have had it working then it came up as unknown device done it twi...

    Hi all. Newbie here... I attempted to update my motherboard bios the other day when I noticed there was an udpated version that fixes a little problem that's been annoying me for a while:
    Quote- Fixed memory size can not be identified properly.[/quot...

  • MSI X99S GAMING 9 ACK Power LED Issue

    When I connect a Chassis front Panel connectors to my motherboard JFP1 connecter, all working except power led indicator ( the chassis power led is a separated +\- , not 3 pin )
    no matter what the positions (+\-) all the same results, also I have tried...

    Quote from: flobelix on Today at 20:11:28Fastboot is for UEFI booting. MSI fastboot is an option if using legacy booting for a faster boot. In UEFI booting only choose fastboot (not MSI fastboot)
    But thats the thi...

  • MSI X99S GAMING 9 ACK Strap issue

    Hi,
    Iam not sure how the strap is supposed to work with this mobo, but i cannot find any option to set it. It must be in the bios, due the X99 system cannot handle the high BCLK. From the website: "The next generation OC Engine is offers a dedicated Clock Generator for more flexible BCLK adjustments, from 100 / 125 / 167 MHz straps." I would use my memories on 3000, that is why i ask. I have already checked the all available BIOS, and still look for the strap menu. It should be in the BCLK section, as i used to it before. I somebody know, how it is working, please let me know.

    Quote from: Chike on 30-May-15, 01:05:16
    Using the memory at 3000 require different BCLK?
    Yep, need to use 125 strap, or this case looks like should set the bclk onto 125, and the clock generator handles the other frequencies.

  • Re: msi x99 gaming 9 ack does not detect capture card when using with xsplit

    I concur with all of badboy2k's thoughts. He puts forth a very good explanation, and it makes sense.
    I'd get the power supply out and get a good branded power supply (Seasonic is my preference at this time)....

    I have a MSI z87-GD65 and I cannot get the computer to reboot.
    I am on a fresh windows 7 install.
    Specs
    i5 4690k
    EVGA GTX 670
    EVGA 750w
    G skill 2x8gb 2400
    samsung 250gb ssd
    Did:
    Latest bios update from msi
    CMOS reset
    Latest Intel ME driver from msi

  • Re: MSI X99S GAMING 9 ACK Power LED Issue

    Thanks Chike for the info,BTW can i find replacement power/led switch board also for Thermaltake core v1 ?

    http://www.ebay.com/itm/2ft-PC-ATX-Reset-Off-On-Switch-HDD-Power-LED-Cable-Front-Panel-Replacement-Wire-/261950581937
    But does not ship to usa
    Just Google or search eBay for atx power led replacement.

  • Re: Msi x99s gaming 9 ack CPU power connector

    Quote from: Nichrome on Yesterday at 20:57:53Hi
    What software you use to communicate with others? Did you try something else? Lets say... Skype instead of TS3? Does it happen with any voice comm software?
    Have you ins...

    I'm finding the power supply the most confusing part. I may be just been dumb but but in my search to understand more it seem hard to fine full information for the complete beginner. My psu has a bunch of sockets with 8 pins an 6 pins, are all the 6 pi...

  • Hey i have problem white msi x99s gaming 7 main board led debug cod 04

    hey me is Jacob. and i have thes problem White me msi x99s gaming 7 that i get code 04 in the led debug when i power it up and then it whont boot up as normal and it stands on the code 04 in the led debug on the motherboard and it just came Yesterday. and it have been runing for 7 months White no problem and that is that  i have the time I have had it in. and when the led debug code 04 in the manual it say power on south bridge initiation. me  bios version on me msi x99s gaming 7 is H.90

    Board: MSI x99s gaming 7
    Bios: Version H.90
    VGA: MSI 970GTX gaming 4g, MSI 750TIGTX GAMING 2 GB
    PSU:   Cooler Master G750M, 750W PSU
    Intel Core i7-5820k Intel® Haswell-E 3.3GHz (3.6GHz Turbo Boost) LGA 2011-v3
    MEM: Crucial DDR4 16GB 2133MHz Quad-channel KIT
    HDD: samsung 840 evo 120gb SSD and Seagate® Desktop SSHD 1TB
    COOLER: Intel TS13A Air Cooler
    OS: Windows 8.1 64bit Professional
    i have tried:
    1. Tested power supply with a Thermaltake power supply tester, all voltages are within range, including the CPU power connector, which i did double check to be plugged in.
    2. Tried the video card in another PC, working fine, also tried it in each pci express slot (four of them) on the MSI X99S GAMING 7 board.
    3. Tried resetting the bios and have also tried booting with just one memory stick in Dimm slot 1
    4. Tried powering up the board out of the case with just the power supply, video and memory connected.
    and it still get the samme problem as before and still stand on code 04 and still not boot up.

  • Tom's Hardware released USB 3.1 testing results on MSI X99A GAMING 9 ACK

    Tom’s Hardware released a test result of MSI motherboard and USB 3.1 device. It mentioned that there is an ASMedia ASM1352R controller on X99A GAMING 9 ACK to support two USB 3.1 ports on I/O interface.
    http://www.tomshardware.com/reviews/usb-3.1-performance-benchmark,4037.html
    X99A GAMING 9 ACK, expected to launch in Q1 2015.
    USB ports on MSI X99A GAMING 9 ACK
    Testing Platform
    Results: USB 3.1 VS. USB 3.0
    ASMedia is the only company ready with USB 3.1 and Intel isn’t planning to build the technology into its chipsets any time soon. Neither Broadwell’s nor Skylake platform supports native USB 3.1. Moreover, MSI is the first company to announce its motherboard with USB 3.1 feature. MSI X99A GAMING 9 ACK will undoubtedly be a $400+ motherboard like X99S GAMING 9 ACK before it. Any users who want to enjoy the newest technology can choose MSI X99A motherboard to have the best using experience.

    I dont think the usb 3.1 drives ready now, but it's nice to see msi moterboard get this new feature.
    I think the type-c usb 3.1 will be use on the mobile device for sure!

Maybe you are looking for

  • File Adapter not writing file when processed from one node in a clustered environment

    In our environment, we have 4 server nodes running. We are using a file adapter to write file to a location in the server. the adapter is writing files when its processing data in all nodes except one. Below is the JCA File <connection-factory locati

  • Accept user input in sql *plus 9.2.0.1.0

    Any body budy can get any idea about my sourcr code? I wrote below code in sql *plus accept p_hire_date1 date FORMAT 'DD-MON-YYYY' prompt 'ENTER hire date from:' accept p_hire_date2 date FORMAT 'DD-MON-YYYY' prompt 'ENTER hire date to:' DECLARE v_hd1

  • How to set a favicon in portal

    Hi, could anybody tell me where to set the small icon beside a URL or beside Portal favorites? Where can I set this favicon? In the Theme Editor? Thanks and best regards Markus Armbruster

  • IF and @descendants() functions

    Hi All, I want to use" @idescendants() function" in the " if statemens" area. FIX([YEAR], [PARA],"SV01") "NET_SALES" IF([NET_SATIS_HESAPLA] ==1) @IDESCENDANTS("Stock"); @IDESCENDANTS("Brand"); @IDESCENDANTS("Product"); @IDESCENDANTS("Country"); @IDES

  • WebDeployPackage: Parameters.xml file

    I use the following command to create the web deploy package: msdeploy -verb:sync -source:metakey="Default Website" -dest:package=D:\WT\test2.zip > msdeployarchive.log But this doesn't create a parameters.xml file!!! Can someone tell me how to create