MSI Z68A GD55 G3 INTEL RST ISSUE

Hi, i have been trying to install intel RST software to setup my raid 0 but it wont install, it gives me an error saying "This computer does not meet the minimus system requirements to install this software' need help please.
running i5 2500k, 2x 500gb sata 2's, 8gb ram.

Quote
so thats why its not working?
Yes.

Similar Messages

MSI GeForce GTX 970 with MSI Z68A-GD55 (G3) motherboard

Hi!
I have seen a similar issue here that was resolved with the help of this forum. (https://forum-en.msi.com/index.php?topic=251322.0). I still want to ask my questons however, since I have a slightly different situation.
I recently bought a new Graphics card, a MSI GTX 970, to replace my older EVGA GTX 570. After installing it, the time it takes to startup the computer is quite a bit longer. The very begninning of the startup process is the part that takes longer, I see a black screen and "B2" in the lower right hand corner, with the older GPU this was seen for a few seconds but now it stays that way for about a minute. After that I see some random colors in stead of the MSI logo and then the regular "Starting Windows" image appears, from there the startup is as fast as before.
When the computer has started it seems to work perfectly, and the new graphics card is great, everything on "ultra" in games etc.
I guess the way to resolve this issue is to update BIOS. I am a bit afraid of this however, of the risk of destroying something.
What would be your suggestions? Is it better to update bios or to leave it as it is, since the computer works? Are the any risks with keeping this bios version, that seems to have some issue with the graphics card?
Any help would be greately appreciated!
/Johan
Board: MSI Z68A-GD55 (G3)
Bios: Version 23.7
VGA: MSI GeForce GTX 970 Gaming 4GB
PSU: Corsair TX 750W Modular
MEM: G.Skill Ripjaws X Performance 2x4GB
CPU: Intel Core i5-2500K Sandy Bridge 3.3GHz – not overclocked
System Harddrive: SSD 120GB Corsair SATA 2.5", Force 3 Series
Extra Harddrive: 1TB Samsung SP SATA-2* 7200RPM Spinpoint F3
OS: Windows®7 Home 64-bit
Cooling: Standard fans from the case (Fractal Design Define R3) and for the CPU plus one Scythe Slip Stream 140mm (1200rpm)

Ok, thanks for the advice.
I have started looking at the instructions and have downloaded the installer and the bios file. It seems Norton Internet Security has some problem with the installer. When I start the installer it reaches the point when it shows the current bios version, after that it is interupted by Norton. The reason that Norton gives is that it has found something called "Suspicious.Cloud.9.B" in the file b4.bks. How should I react to this?

Core i7 2600k and msi z68a-gd55 b3 acting up and lagging on me

HI, I just built a new gaming rig and for the life of me, I can't figure out why im getting lag and im not impressed coming from a P4 Dual core.. OK here's my setup
Core 17 2600k with CoolMaster Heat Sink
MSI Z68A-GD55 B3 mobo
4x4gb DDR3 1600 Corsair Vengeance Ram 9-9-9-24 Total 16Gbs
EVGA GTX 560TI 2Gb Video Card
CORSAIR GAMING SERIES 800 Watt 65a on the 12v Rail
(ONLY USING ONE HDD GOT 2 HDD'S TO TROUBLESHOOT TO SEE IF ITS THE HDD)
CURRENTLY IN USE FOR MAIN HDD 1 Seagate Barracuda 7200 rpm 1TB HDD
1 Western Digital Cavier Black 7200 rpm 2TB HDD
Running on Windows 7 Ultimate x64
So i install the OS and updated all my drivers and for all hardware and updated the BIOS and i got everything stock in the BIOS, No overclocking yet and when im just surfing the web or open up an app, I get this annoying lag and my CPU load and Memeory load will be at 0-5% and it will effing lag... Now i changed out everything thinking it was the problems, down to the Ram 3x's, CPU 1x, Motherboard 3x's (I'm even coming from a different board thinking, that was the the problem. Since i read alot of bad reviews on it.. AN INTEL DP67BG Extreme Series board and come over to the MSI im currently using ) and my PSU 1x.. and nothing fixed it.. When i run a CPU Stress test it comes back with no ERRORS... Now when i do a Memory Test in the BIOS of the mobo.. It will PASS, no problem.. but if i run it in MEMTEST86 it will FAIL right away.. Then when i test each stick 1 by 1 in BIOS they PASS, NO PROBLEM, But not in Memtest86... So i bought 2 Pairs of 4 new sticks 2 different times.. the same kind of Ram, "which are compatible with this board" and the same thing happens with the lastest MSI BIOS i'll test them with the Memory Tester From BIOS, all 4 sticks and 1 by 1 and then 2 sticks for dual channel in slot 1 nearest CPU and slot 3 and they will PASS but when i try with Memtest86 they FAIL... So i dont think its the Ram cuz 3 different sets are Failing... i highly doubt it's hardware anymore... Agree?
Can someone PLEASE HELP ME..! I've been working on this build for 2 straight weeks day and night and i have a bad taste in my mouth over this build. this isnt my first one either and i never, never, ever had theses problems before... i'm about to quit and go back to a p4 dual.. But i don't like to quit and want to feel the power of a i7 2600k that everyone swears by...
please lead me to fixing this... if you can email me for one on one support id compensate you for your time.. [email protected]
BTW i brought it by geek squad and they couldnt figure it out either... but he didnt know his from his elbow lol
Thank you, Marco

ok so the WD is still doing it but not as bad as the seagate was! as for UEFI/BIOS im on 22.8 loaded with default setting except for the dram voltage now, and it was set at 1.4 something i changed it to 1.5 like you said and that help some but i still get lag here and there showing up when moving the mouse with is a microsoft wireless 4000
update so after setting it to 1.52v in bios im noticing when typing i get freeze up with the cursor and when i open apps the hour glass is appearing at longer then normal even for a p4 chip
any other ideas why is this becoming a nightmare with my hardware can you give me a run down on what everything should be set to in bios.. cuz it looks like default settings are off and im having video card issues but that's for another forum but im thinking they all tie in together..
thank you so much for helping me looks like no one cares to help a fellow builder out.. but when its them in my shoes there quick to beat dowm the door for answers... sorry im just frustated that over a grand invest and my smartphone feels snappier and responsive then this build.. oh i ya check cpu and the board for mis seated chip and bent pins and correct amount of good paste and heat sink seated and torqued down correctly.. so im not sure anymore im sooo i just want to

MSI Z68A-GD55 (G3) and Corsair 2133Mhz doesnt boot! Please make a BIOS update!

Just bought a new MSI Z68A-GD55 (G3) and flashed to latest official BIOS 23.6. This mobo supports 2133Mhz but my new Corsair 2133Mhz doesnt work no mater what i set it up in bios except 1333Mhz??
MSI please make a BIOS update for Corsair memory CMZ16GX3M4X2133C11R
My new PC works in default state/1333Mhz but not in 2133Mhz. Any tips?
I live in Sweden and bought this quad memory: http://www.webhallen.com/hardvara/147837-corsair_xms3_vengeance_quad_16gb_ddr3_pc3-17066_2133mhz

This is a user-to-user forum, not MSI Technical Support. We don't make BIOS Fixes here, sorry.
Quote
This mobo supports 2133Mhz
Not quite right. The memory controller is inside the processor, not the mainboard. According to Intel specifications, the native supported maximum is DDR3-1333. Everything above that has to be considered overclocking and therefore not necessarely stable.
I am moving this thread to the overclocking section of this forum for further discussion.
Quote
My new PC works in default state/1333Mhz but not in 2133Mhz. Any tips?
Go lower for testing: try DDR3-1600, DDR3-1866 etc, memory voltage 1.65V, command rate = 2T, play around with the other timings to find out what works and what not.
Quote
flashed to latest official BIOS 23.6
FYI: Latest official release is slightly newer: https://forum-en.msi.com/index.php?topic=151148.msg1151874#msg1151874

MSI Z68A-GD55 (G3) Duel Channel Problem

Hi,
Recently i built a new computer using
MSI Z68A-GD55 (G3).
2500k CPU
G.Skill Ripjaws X F3-10666CL9D-8GBXL 8GB (2x4GB) PC3-10666 (1333MHz) DDR3 RAM
Now my computer runs great when i am using 1 stick of ram (either stick) or both sticks single channel (dim 1 & 2) and will easily pass memtest86+, but my computer becomes unstable when in duel channel, crashing and freezing between 1 - 5 times a day in windows and will fail memtest86+ every time.
Now i only know the basics when it comes to ram, but basically I'm wondering what my options are.
The company i bought the ram from says i can return it for a different brand. will this help? i have to pick something from;
http://www.pccasegear.com/index.php?main_page=index&cPath=186_538_913
I was thinking of getting the kingston value ram 2 x 4 gig 1333mhz. Will this solve my problem? is there an easier fix to this issue? what do you recommend?
Kind Regards
Ben.

The Kingston should work fine. If it doesn't, it may be worth taking a look at the CPU socket for any possible bent pins.

Z68A-GD55 (G3) Keyboard+freezing issues

Hi, I've had issues for a long time with my computer locking.
It's a bit random but mostly locks during desktop usage an not during gaming.
It will lock sometimes if I leave the computer on and going away for a couple of hours.
However it wont lock always. Any suggestions would be welcome.
Also I have a Qpad MK-85 keyboard that my BIOS won't recognize.
(It works when I'm in windows but not during boot.)
So I'm wondering if I can make a bios update that will support it. If so which BIOS?
And how do I go about updating it? I read some stuff but I can't understand exactly how to go about it now with ME7 and ME8 and stuff.
Some hardware info:
MB: Z68A-GD55 (G3)
CPU: Intel Core i7-2600k 3.4GHZ
GPU: Nvidia 570 GTX (SLI)
HDD1: Corsair CSSD-F120GB (system partition)
HDD2: SAMSUNG HD205UI (storage)
RAM: 8 Gig (not sure about brand but been doing memtest for several hours without errors)
Im running in AHCI mode, and I've enabled Hotplugging in bios.

Keyboard power management was unchecked.
And here is some info from CPU-Z
MBus address      0x50
   Memory type      DDR3
   Module format      UDIMM
   Manufacturer (ID)   Corsair (7F7F9E0000000000)
   Size         4096 MBytes
   Max bandwidth      PC3-10700H (667 MHz)
   Part number      CMX8GX3M2A1600C9
   Number of banks      8
   Nominal Voltage      1.50 Volts
   EPP         no
   XMP         yes
   XMP revision      1.2
   AMP         no

Slow POST [ MSI Z68A-GD55 (B3) ]

The motherboard Z68A-GD55 (B3), with each start, during Power On Self Test about 20-30 seconds detect the USB device (screen code B4 - USB Hot Plug). By disconnecting all external devices was found that such a large delay occurs only because of a web-camera (Logitech C910 HD Pro). All other peripherals - keyboard, mouse, printer - to be detected immediately, B4 code does not appear on the screen.
All devices are connected to the ports USB2.0
This same a web-camera in the other two motherboards with standard AMI BIOS (not EFI) does not cause any problems with the detection of USB devices.
Updating the BIOS from version 22.3 to 22.5 gave no result.
I have to manually disconnect / connect the camera.
Do you plan to fix this error in new versions of BIOS?
Upd.
POST also runs slowly if at any port plugged USB Flash Disk (manufacturers Samsung, Transcend, Pretec).
Sorry for my english. I am use Google Translate.

Quote from: NovJoe on 05-January-12, 12:37:10
Test with another USB port. Test especially with the USB 2.0 port instead of the USB 3.0 port.
I connected the devices to all available usb-port, 2.0 and 3.0, also tried to disable usb 3.0 in bios - the problem remains.
I sent a message to MSI tech support and waiting for their response.

MOVED: core i7 2600k and msi z68a-gd55 b3 acting up and lagging on me

This topic has been moved to Intel Core-iX boards.
https://forum-en.msi.com/index.php?topic=158189.0

ok so the WD is still doing it but not as bad as the seagate was! as for UEFI/BIOS im on 22.8 loaded with default setting except for the dram voltage now, and it was set at 1.4 something i changed it to 1.5 like you said and that help some but i still get lag here and there showing up when moving the mouse with is a microsoft wireless 4000
update so after setting it to 1.52v in bios im noticing when typing i get freeze up with the cursor and when i open apps the hour glass is appearing at longer then normal even for a p4 chip
any other ideas why is this becoming a nightmare with my hardware can you give me a run down on what everything should be set to in bios.. cuz it looks like default settings are off and im having video card issues but that's for another forum but im thinking they all tie in together..
thank you so much for helping me looks like no one cares to help a fellow builder out.. but when its them in my shoes there quick to beat dowm the door for answers... sorry im just frustated that over a grand invest and my smartphone feels snappier and responsive then this build.. oh i ya check cpu and the board for mis seated chip and bent pins and correct amount of good paste and heat sink seated and torqued down correctly.. so im not sure anymore im sooo i just want to

MSI Z68A-GD65 (G3) + 2500k OC issues

After updating to the latest bios (25.8, planning to drop in a GTX 970, fingers crossed no issues there), I can't seem to hit 4.2ghz any more. Firing up prime95, it'll hit 4.2 for a second then settle down to 3.6-3.8.
Everything is default except for spread spectrum + EuP 2013 disabled. XMP enabled.
Note, OC was smooth for a year until I upgraded. Great temps, great stability.
And are the links to the beta bios + USB flash tool ever coming back?

Quote from: badboy2k on 23-November-14, 03:55:37
the newer BIOS versions are tuned for Ivybridge CPU's and have a side effect of limiting the OC ability on a sandybridge chip like yours and there is no way to fix that
Can I downgrade to ME7 or am I stuck now?
If yes, could you link the MSI Forum USB bios flasher?

MSI Z68A-GD55 (B3): Crashes during boot - USB kboard input on dual boot screen

Hi,
My system has 1 HDD with 3 bootable partitions. When I boot my PC i have the standard OS selection screen where i tell BIOS what operating system to boot. All three operating systems are windows 7 professional.
My issue is that on this screen you have to use a keyboard to select the operation system/partition to boot from. I can get this screen to become completely unresponsive simply by pushing the down arrow too many times. Sometimes if i push it once the screen will become unresponsive, sometimes i have to push a key 10 times, but it happens.
My MSI drivers are 100% up to date as of the 6th of March.
I believe this is a BIOS bug.
BIOS is E7681IMS V22.6
Live update says everything is up to date.
Regards,
Tim

When the system is unresponsive, have you try to press the capslock button or numlock button and see if the lights on the keyboard is responding to your keypress?

MSI Z68A-GD55 G3 Audio Interference

I seem to get a constant buzzing/whining sound on my audio out.
This is exacerbated by moving windows around.
The issue happens on both Ubuntu 11.10 and Windows 7
Should I try and get a refund? I don't really want to dismantle my rig.

Quote from: voy_ on 27-January-12, 17:19:36
It's not about amount of graphics in players, i'm running humble foobar2000 so...
But finally figured out my problem.
It was really about C-States. This "awesome" click bios didn't react when few times i've set C-States to [Disable], but reset button worked, and now i have clean sound from my headphones (with same bios settings).
Didn't check internal yet.
Thanks guys
[edit]
Never mind, it's all back to normal. I have still clicky, poppy sound from sound blaster and noisy from internal. Got to RMA my first and last MSI board
You seem to have a different issue to me. Mine is unrelated to sound output, the noise is the same regardless what is playing

MOVED: MSI Z68A-GD55 (G3) and Corsair 2133Mhz doesnt boot! Please make a BIOS update!

This topic has been moved to Overclockers & Undervolting & Modding Corner.
https://forum-en.msi.com/index.php?topic=156770.0

This is a user-to-user forum, not MSI Technical Support. We don't make BIOS Fixes here, sorry.
Quote
This mobo supports 2133Mhz
Not quite right. The memory controller is inside the processor, not the mainboard. According to Intel specifications, the native supported maximum is DDR3-1333. Everything above that has to be considered overclocking and therefore not necessarely stable.
I am moving this thread to the overclocking section of this forum for further discussion.
Quote
My new PC works in default state/1333Mhz but not in 2133Mhz. Any tips?
Go lower for testing: try DDR3-1600, DDR3-1866 etc, memory voltage 1.65V, command rate = 2T, play around with the other timings to find out what works and what not.
Quote
flashed to latest official BIOS 23.6
FYI: Latest official release is slightly newer: https://forum-en.msi.com/index.php?topic=151148.msg1151874#msg1151874

MSI Z68A-GD65 (B3) - Start-up issue.

Hey there! I just got a new processor, motherboard, case, and power supply for my birthday. Here are my specs:
Z68A-GD65 B3 Mobo
12GB Ram
i5-3570k processor 1155
2TB HDD
Optical Drive
650W Powersupply
I just put it all together, and what do you know, a problem...
I press the power button, and all the sudden it turns on. Then after 3-4 seconds, it turns off. Then after 2 seconds, turns back on again, then 3-4 seconds back off, then on again, you get the point. Its as if the POWER button is always pushed in. Yet, i have since then unplugged the case, tried it a million times, and NOTHING seems to work. Maybe its the power button malfunctioning on the MOBO...?
I need some help! Feel free to ask any questions. I will be on constantly to check this.
Thanks ,
Josh ...

That board is end of Lifetime for a long time. If you bought it now it was resting in the shop for quite a while. No B3 board comes with Ivy Bridge support out of the box. You need a Sandy Bridge cpu to flash it or let it be flashed by a shop or MSI. Else this will not work. It can't boot with an i5-3570k right now.

Restore Ivy Bridge to Sandy Bridge MSI Z68A-GD55 G3

Hi,
I made the mistake that upgrade my BIOS to Ivy Bridge compatible one and I lost my all OC control over my motherboard. When I tried to back to version 23.7 BIOS that in the link http://msi.com/product/mb/Z68AGD55_G3.html#/?div=BIOS , I get the following error "rom file romid is not compatible with existing bios" with MSI Forum HQ USB Flashing Tool. Please help me, how can i go back to Sandy Bridge bios?

Quote from: Svet on 26-April-14, 18:33:22
it will help to flash back to the wanted bios
Sorry but I can't say I understand what you are saying :(

MSI Z68a-GD55-G3 wont post when combined with new RAM

Hi!
I currently have 2x4gb Corsair Vengeance RAM installed and everything was fine. Then I ordered 2x8gb Crucial Ballistix LP (got them cheap).
Both have 9-9-9-24 timings are at 1600MHz, but when installed together PC does not go to even BIOS. Just powers off and then again starts powering up and then powers off (cycle continues)
I have tried the 2 new sticks and they work fine, tried in two different configs (8,x,8,x and x,8,x,8)
With 4 sticks: 8,4,8,4 or 4,8,4,8, no post.
My system specs:
Core i5 2500K
MSI Z68-GD 55 G3
Has anyone had any luck with this combination before. Should I just give up now?
Thanks!

You are not going to have much luck mixing different brands of RAM like that. At the very least if you are going to mix 2 kits of RAM you should buy the exact same models and even then you can't be guaranteed they will work together as the chips may be different from one batch to the next even tho part & model number of the sticks are the same.
Now that 4 channel kits are available you should really go that route.

MSI Z68A GD55 G3 INTEL RST ISSUE

Similar Messages

Maybe you are looking for