MSI Z77A-G45 can't install window 7 by raid 0

I have a rig which:
CPU: Core i7 3770k
HDD: Two Western Digital 1 TB 7200
Main: MSI Z77A-G45
Power supply: 700W
Ram: 32GB DDR3 1333 MHz
*** VGA card: MSI Geforce nVidia GTX 660 Ti 3GBDDR5 TF
After configuring BIOS to setup RAID 0, I was trying to install Window 7 on my 1.8TB ( which was summed of two HDD )
But I got a problem about couldn't install the O.S on.
***And about the VGA, whenever I plug it in my mobo, my monitor shows black screen as it doesn't recognize the VGA card. What happen if I install window then add the VGA card later? Will it affect on my system later?
And what should I do to install RAID 0 with my stuff? I appreciate all supports.
Thank for read and answer my topic!

The 660ti will require a bios update to use most likely.
Is the system stable enough to flash? The forum flash tool included memtest, run this an so long as no errors or crashes, go ahead a flash to the most recent bios.
>>MSI Downloads<< For full release
or
>>Beta BIOSes<<
>>Use the MSI HQ Forum USB flasher<<
Make sure in you next post to include more detail on the raid set up error. What error? When did it fail?

Similar Messages

MOVED: MSI Z77A-G45 Can't maintain overlock

This topic has been moved to Overclocking, Undervolting.
https://forum-en.msi.com/index.php?topic=161516.0

Quote from: xmad on 06-September-12, 02:02:48
http://www.msi.com/product/mb/Z77A-G45.html#/?div=Driver&os=Win7%2064
Have you installed all of the drivers? I linked win 7 64-bit make sure to select the right one.
Could you post ss's of your cpuid spd / memory tab & bios settings please?
Edit: Did you make sure the memory is installed in the right dimms for dual channel operation it is dimms 2 & 4 which sometimes throws people off.
Edit 2: Don't do this with an I5 2500k, use the multiplier only to increase speed. That cpu does not like that.
Windows & drivers are not the problem. As long as it boots I get into windows, but it will fail at the POST state. Memory is installed as decribed in the manual in slot 2 & 4.
I made some screenshots:
Between pic 1 and the last I changed dram timing to link, but on auto it will fail the same way. Everything is stock. It doesn't matter what I change as long as I don't change the cpu freq it will boot just fine. But god forbid I overclock 100mhz it will fail. But only after shutting down. Like said before I can turn it all the way up to 4500mhz just fine, just don't shutdown and try to boot it up again.
I also did a CMOS reset, didn't help either.

MSI Z77A-G45 Can't maintain overlock

I'm having problems overclocking my system. When I enable OC genie it will run 4.2ghz all day np. Now when I reset default values, turn op the vcore and then adjust my CPU frequency I can achieve 4.5ghz quite easily. Run some benchmarks everything is stable no problem.
Now as soon as I shutdown my PC and start it back up it always fails, tries starting about 3-4 times and then decides the OC failed and then restores default settings.
But even when I only up the frequency a little let's say 3500mhz it still won't boot up after powering down. It seems like something is changed after shutting down and powering it up again.
How come manually it can run high speeds but as soon as I power it down and up it fails?
And how come OC genie can run 4200 and power up just fine.
Even when I mimic all values OC genie uses it still wont power up.
update:
I was a little to fast to say it will work with oC genie all the time. At the moment when I load defaults and then enable OC genie it works fine. But shutdown the machine and then start it again it will also fail with OC genie enabled.
So it won't overlock even 100mhz when shutdown, when booted up and resetted there is no problem and I can stabily run 4500mhz with high load np. What is the difference between a reset and a shutdown and start up??? This makes no sense.
I'm running the latest bios version.

Quote from: xmad on 06-September-12, 02:02:48
http://www.msi.com/product/mb/Z77A-G45.html#/?div=Driver&os=Win7%2064
Have you installed all of the drivers? I linked win 7 64-bit make sure to select the right one.
Could you post ss's of your cpuid spd / memory tab & bios settings please?
Edit: Did you make sure the memory is installed in the right dimms for dual channel operation it is dimms 2 & 4 which sometimes throws people off.
Edit 2: Don't do this with an I5 2500k, use the multiplier only to increase speed. That cpu does not like that.
Windows & drivers are not the problem. As long as it boots I get into windows, but it will fail at the POST state. Memory is installed as decribed in the manual in slot 2 & 4.
I made some screenshots:
Between pic 1 and the last I changed dram timing to link, but on auto it will fail the same way. Everything is stock. It doesn't matter what I change as long as I don't change the cpu freq it will boot just fine. But god forbid I overclock 100mhz it will fail. But only after shutting down. Like said before I can turn it all the way up to 4500mhz just fine, just don't shutdown and try to boot it up again.
I also did a CMOS reset, didn't help either.

MSI B85M-G43 can't install Windows 7. Hard disk not detected.

Hi,
I just built a new computer for the first time. I followed the instructions and did everything correctly. but am unable to install Windows 7 Ultimate 64bit. Hard disk isn't always detected during the installation.
But when it appeared in the "Where do you want to install Windows" list along with system, I tried to format the hard disk and got a message "Failed to format the select partition. [Error 0x80070057]."
Then I restarted the computer, the hard disk no longer displayed in the list, so I put motherboard driver disc and clicked on Load Driver and opened Storage\Intel\PCH_12.0\f6flpy-x64. It loaded, then I got a message saying "To continue installation, use the Load Driver option to install 32-bit and signed 64-bit drivers. Installing an unsigned 64-bit device driver is not supported and might result in an unusable Windows installation."
I restarted again and disabled Driver Signature Enforcement, but it didn't help. I still got the same message.
In the computer case I have these devices:
- MSI B85M-G43, Socket-1150
- Intel Core i5-4430 Processor
- Corsair Vengeance DDR3 1600MHz 8GB
- MSI GeForce GTX 650Ti BOOST 1GB
- Cooler Master GX 550W PSU
- WD Desktop Green 1TB
- SuperMulti 16X DVD(+/-)R/RW 12X RAM (+/-)R DL LightScribe SATA drive
Everything is plugged in correctly. Hard disk connector plugged in SATA 1 and DVD -> SATA 2.
The installation is pretty slow, regardless if i install it via USB or x16 DVD. All except DVD and hard disk are disabled. It's also worth to mention that even DVD and USB aren't always detected in the click BIOS.
So I'm wondering if anyone here can help me? Thanks

Hi and
1: What BIOS version you have? .. Have you tryed to downgrade/upgrade it already?
2: Have you tryed it in those SATA 2 ports? ...is it same strory?
- On SATA there aint any master or Slave like on IDE so if you are under same controller it dosent mutter what port you use on what device.
Note: SATA 3 Ports are faster then SATA2 ports, but even SATA 1 can handel your DVD or HDD. So no lose if you need to use SATA 2 ports.
Hope this get you foward! Cheers Mummy

MSI K8N Neo2, can't install Windows

MSI K8N Neo2
Amd 64 3500+
Ocz 3700 EB 512Mb x 2 / Corsair pc4400 512Mb x 2
DDR Booster
Radeon 9600XT / GeForce Ti 4200
Audigy 2
IBM Deskstar 40Gb (My raptor is on rma r&r)
Psu Enermax 460w
The system is watercooled.
My Windows got bad after SP2 was installed so I went to reinstall Windows...
When I try to install Windows XP Pro I get Blue Screen/system freeze/black screen.
This happens soon as the cd starts to read the files/installing files after format.
I haven't been able at all to install Windows successfully (I don't even get to windows).
My system is listed above and as you can see I have tried with 2 different graphic cards, 2 different rams and with/without the booster, with/without the soundcard, 3 different dvdplayers and 3 different Windows XP Pro.
Och and yes I have tried the hardware (except mb & cpu, don't have another Amd 64 mb or cpu) in an another computer and they work fine.
Nothing works.
Could it be that the mb that is bad or?

Quote
Originally posted by kensterman
Is your CDROM drive okay? How about the XP CD itself? Either way, it sounds like it's bombing duing the reading/ copying of the files..
I have tried with 3 different dvdrom drives and 3 different XP cd's, results are the same.

MSI Media Live: can't install Windows 7

Hello,
I'm not able to install win 7 :(
Installation always crash during "unpacking windows files" I try install from DVD, from USB, with monitor connected via HDMI or D-SUB (https://forum-en.msi.com/index.php?topic=127670.0)
with bios version 1.5 or 1.63... it is still the same. What the heck can be the problem???
Anybody any idea?
Thanks!

Topic split. What hardware have you installed in your Media Live?
>>Posting Guide<<
And describe the problem you have a little better please.

MSI Z77A-G45 and Samsung 840 Series weirdness

Ok so here's the thing
about a week ago i decided that it was time to build a new computer with a Z77A-G45 motherboard
put it together, installed windows 7 64-bit and everything was working just fine - for about 5 days -
but then one morning when i turned on my computer it decided not to boot and just sat there with fans running with an A2 code at the bottom left of the screen
i tried taking out the ram leaving just 1 in and moving it to different slots and trying a different ram block boots thinking it might be faulty ram,
when that didn't work i tried removing the graphics card and boot with just the onboard VGA, reset the CMOS jumper, and even replaced that battery on the motherboard thinking the shop might have shipped an almost dead one, took everything apart and booted it outside the case on a glass surface to make sure it wasn't some sort of short
but the only time it actually wanted to get past the A2 code was when i booted with only 1 of my hard drives, so i started changing my drives around using various combinations of SATA cables and ports (luckily had an extra 5 SATA cables lying around)
eventually i narrowed it down to it wanting to boot with 2 of my 3 drives but the 3rd one (a Samsung 840 series 500 GB SSD, that has no system files or anything fancy other then music, movies and a few games at the moment) getting it stuck on the A2 code
so i set it up as an external USB drive with a SATA/USB converter i had sitting around but then it would get stuck on B4 instead if i booted with the drive connected
however everything would work just fine if i connected the drive after the system had booted up (or even just unplugging and replugging it when it got stuck on the B4)
once back in windows with the drive connected i ran all the diagnostics i could think of but nothing showed anything wrong with it
(and the only thing i had done with the drive before it stopped wanting to boot was to defrag it)
eventually i decided to copy all the files from the drive to a different drive and reformat it as sort of a hail-mary
and to my surprise that actually made it boot up just fine
so i moved it back inside the case as a normal drive just to make sure it would still work (which it did) and then moved all the files back to see if any of them were the culprit - that turned out not to be the case however
it booted up without complaint with all the original files on it
so now my question is why?
what the heck is going on?
did defragging cause some sort of data fault that caused the bios to not be able to read the drive properly or did i just buy a haunted computer?
like i said everything is back in the state it was the day before it didn't want to boot and bios and been defaulted so it's not really an issue at the moment but I'd still like to know what's going on so i can hopefully avoid it in the future
any answers or comments will be appreciated
for your reference a full parts list:
Motherboard: MSI Z77A-G45
Bios Version: 2.10
Graphics card: Club3D GeForce GTX 550ti 2GB
PSU: Corsair TX 950W - 100-240V ~ 12A 50/60Hz
CPU: Intel Core i7 3770K / 3.5 GHz Processor (Stock boxed fan)
RAM: Corsair Vengeance - 32 GB (4 x 8 GB) - DIMM 240-pin - DDR3 - 1600 MHz ( PC3-12800 )
HDD: OCZ-Vertex2 128GB SSD (OS)
Hitachi HDS722020ALA330 2TB HDD (Media/Backup)
Samsung 840 Series 500GB SSD (Media/Backup)
OS: Windows 7 64bit Ultimate

This is strange
I have Z77A-G43, and have exactly the same problem with one 1GB sata drive, that works just fine in every other PC.
In my case PC run into restart loop, but with same code A2 as yours.
Strangest part was PC was restarting even if I put HDD into PCI Sata/Raid card !?
So I am guessing here its not a hardware problem, but a software (BIOS) problem.
Now whole pc with Z77A-G43 is at Service because of faulty DVI output (not working).
Will try reformating drive, but need first to buy >1gb hdd to backup that one
Drive is currently working just fine in this 10y old MSI PC =.=
It seams they have stopped making things as they used to, this old mb is one durrable dog.
which was the main reason I went to same company when in question was mb...

MSI Z77A-G45 RAID Issue

Greetings...
Just got a new MSI MoBo and wanted to RAID1 my two WD Caviar Black HDDs. However, everytime I enable RAID and reboot it goes to a black screen with two "Z"s randomly placed in the middle. Once I get to the "black screen", it will only boot to that screen afterwards and needs a CMOS reset to fix. I have tried everything I can think of, but always get the same results. I have successfully installed Windows 7 on one of the drives with AHCI mode enabled, and have also had IDE mode work fine... but as soon as I enable RAID - black screen.
Everything else on the board seems to be fine. Anyone have any ideas?
SYSTEM:
MSI Z77A-G45 mobo
Intel i5-3570 CPU
Coolermaster Hyper 212+ EVO
8GB Crucial DDR3-1600
EVGA 560Ti 448 Core Classified (Primary)
XFX 260GTX XXX Ed. (Physx)
2 x WD Caviar Black Dual-Proc HDDs
LG DVD Super-Multi Burner
Silverstone Decathalon 850W PSU
Windows 7 Home Premium 64-bit

FIXED - Ended up reflashing the BIOS, which restored the RAID utility. BTW, my G15 keyboard would not register the CTRL-I to get into the utility... I had to use a PS/2 keyboard, which required a CMOS reset in order to recognize. Just posting this in case anyone else runs into this.

MSI Z77a-G45 graphics driver issue.

02-june-2013
MSI Z77a-G45 graphics driver issue.
Trying to install the graphics drivers for this board from the MSI site, I but every time I do so on loading windows 7 my monitor just goes to sleep and I have to roll back the driver in safe mode. This is the same for the driver found in the windows 7 updates.
Iv downloaded the files a few times over and reinstalled windows twice and the problem remains. Can anyone suggest anything? Is there something I’m missing or need to set in the UEFI bios for using the onboard graphics?
MSI Z77A-G45, i5-3570K, 2x 8GB Corsair memory, Windows 7 64bit.
Thanks.

My BIOS is E7752IMS V2.10
Iv already downloaded V2.A
However I have to say the guide at uk.msi.com/service/biosupdate/ , appears to be putting v2.2 on top of v2.2.
it also says "Download the BIOS that matches your motherboard and version number to your USB device."
I'm not entirely sure what is meant by 'version number' but it dose suggest i need to download V2.10 not V2.A ... call me picky but i want to be sure! lol.
Can anyone confirm ether way? It dose seam rather odd!
Thanks.
**edit
Update on my graphics issue
With the default driver, just before the windows 7 log in screen appears. I was getting a portion of it appear first on the bottom 1/8 of the screen. Now its appears to be a snowstorm of bad graphics and its the same when I switched to using HDMI instead.
Not sure if that's a good sign!
For reff my screen is a HP LP2475w tho I'm rather sure there is nawt wrong with the screen.

(msi z77a-g45 motherboard) A disk read error occurring

For the msi z77a-g45 Motherboard
I'm getting the "a disk read error occurred press ctrl+alt+del to restart" error when booting in my new build.
I have recently switched out my 4gb stick of g.skill ripjaws ram for 4x2 gb sticks of 1333mhz ram. I have not done anything besides this and i just started getting this error. I tried each ram stick individually and they boot but i get the error. I tried the 2 and 4 dims and still get the error. I tried re-seating the sata and data cables to my optical drive and hd.
The only thing i can think of is that i was installing a windows update just before i left to go change the ram so if that could be an issue please let me know.
Thanks.

>>Posting Guide<<

MSI Z77A - G45 - CPU multiplier problem

Hi,
I recently bought this PC:
Intel Core i5 3570 k
MSI Z77A - G45 - with BIOS V 2.5
Seasonic S12II-620 620W
Corsair Vengeance Low Profile White 8GB (2x4GB) DDR3 1600
Amd HD 7850
My problem is following:
If I change CPU Ratio (multiplier), in standart mode to 40x and leave CPU core voltage auto, it cause instability, even if use Cpu core voltage 1.25 V for ratio 40x.
But that's not all problem. I could understand, why I cant OC my CPU, but this instability is even if I change multiplier to 30x from default 34x and this makes me uncertain.
Now I will describe you that instability...
OK so, when I change ratio to 40x or 30x it doesn't matter, it runs to windows successfully but after using windows something about 3-6 hours pc turns off.
I also discovered second problem by coincidence. If I hit F11 (Boot menu) , when I am starting pc and I have set ratio 40x or 30x, I can choose what I want to boot only for 10 secs and after that PC restarts by itself....
But if I set default 34x ratio I can choose what I want to boot forever and pc doesnt restart.
I know that boot menu is not some test of stability but it is very strange... Why If I change multiplier, it doesnt matter, if it is higher or lower then default settings it just cause instability ? :-/
Thanks for help.

Quote from: xmad on 19-August-12, 07:02:15
I was just saying that the beta caused a vga problem, latest release the f11 problem so try the release prior to that, but if you got it working don't touch it! lol
Are you still using the beta bios?
No clue, we are just users like you are, just keep checking the website. You should report the troubles you had with 2.4 to msi too.>>How to contact MSI.<<
Yeah iťs working now. As I said, I wanted flash older Bios 2.4, so for sure I click on restore defualts in bios (for sure before flashing) in that 2.64 Bios version...
PC restarts and my graphic card started working =)...
So now I am running on that the latest Bios as you refered mi (2.64 beta).
I am running some test of stability on @ 4 GHz with 1.070 V (IBT,Prime,memmaxx,linx,cinebench,occt,super pi, 3d mark) temps are 62 C max...
So I guess it's ok now =)
At the end I have one question :
My Cpu is now running on 40 x ratio all the time, there is no some underoverlocking ratio (16x etc.) when it's in idle. I was thinking the Ivy Bridge overclocking is overclocking of turbo only...
I know It's detail, because I have good temps even in idle with 40x ration (33-39 C) but i want to be assured if it is ok.
EDIT:
And btw I didnť have 2.4 bios flash on, I wanted put them on... But before flashing my 2.64 beta started working right with HD 7850 as is wrote upper.
I had Bios 2.5 before 2.64

MSI Z77A-G45 & Sapphire Radeon HD 7850?

Hi all, I have purchased the MSI Z77A-G45 Mainboard along with a Sapphire Radeon HD 7850. I just finished my build yesterday and got windows 7 professional installed without a hitch. This was using an HDMI cable to connect my monitor directly to the mainboard. For some reason, my computer cannot detect my video card (7850). Under device manager, it shows that the display adapter is a standard VGA. I know the video card is working because I just tested it on a friend's computer and it ran perfectly with drivers installed. I looked on MSI's website for the compatibility table and saw that the 7850 was missing from the list for the G45. Does this board support the sapphire 7850? Or do I have to buy a new board? I really like this board and got it at an awesome price so I would hate to have to return it but changing the board would be a cheaper option than changing the video card (which was purchased on line). Any input is greatly appreciated. Thanks in advance!

Quote from: mmkc on 23-May-12, 05:15:26
Corsair TX750 V2
thats a good psu! have you tryed another pci 16x slot on your motherboard you may just have a dead slot(its worth a try)?

MSI z77a-G45 Gaming 3770k overclocking?

I just recently purchased the z77a-G45 Gaming mobo and a i7 3770k, most of my googling would leave me to believe that the 3770k can easily obtain 4.6Ghz with fairly low voltages like 1.16-1.20 vcore; here comes the question...in order for me to obtain some level of stability @ 4.6Ghz I must crank my vcore to 1.4150 with 100% cpu offset resulting in a 1.39 vcore in windows with a 1.38 vcore under load. I have all power saving technologies disabled, pll overvoltage enabled, cpu vdroop offset set to 100%; my question is am I missing something with MSI boards as this is the first one I've ever owned or did I just get a very power hungry 3770k?
General system specs
MSI z77a-G45 Gaming MOBO
i7 3770k CPU
16Gb of Gskill Trident X 2400mhz memory
Corsair HX850 Gold PSU
MSI GTX 670 PE OC
Cooled by custom water loop

Alrighty, appreciate the info; gonna back down to 4.4Ghz as I can maintain stability with 1.275 vcore in bios = 1.26 in windows = 1.24 under load resulting in hottest core never exceeding 70...was really hoping for 4.7-5.0Ghz overclock when most everyone who reviewed this chip in the early days was claiming such great overclocks with such low voltage. But I'll chalk that up to either misinformation or non stability checked overclocks, I guess I'm old school; cause if it can't hold up to a minimum 24hr pass of Prime 95 small fft's it isn't stable in my book. Might consider delidding it in a year or so once the new wears off, I had my i7 920 for about that long before I lapped it into a mirror shine lol. So based on my new information 3770k's on average overclock between 4.4-4.6Ghz and can require up to 1.4 vcore and higher past 4.6Ghz which is where you start to really become thermally limited on liquid as the Ivy Bridge's 22nm technology puts the cores to closely together in combination with intel's cheap ass thermal compound solution. Maximum recommended voltage for 24/7 shouldn't exceed 1.4 vcore without some kick ass cooling or a combination of delidded processor and kick ass cooling cause ideally you want your cores mid 70's and below...that about sum it all up?

Help with OCing my MSI Z77a-G45 gaming with i7 2600k

Hi there its been awhile since ive done OC since my old intel e8400 and everything looks different now..i just recently bought a brand new Msi Z77a-G45 gaming MB and i7 2600k for good deal and would like to push my limits on this setup
Currently setup:
intel i7-2600k
8gb ddr3-1600 gskill ripjaw X Model F3-12800CL9D-8GBXL
MSI Z77a-G45 gaming motherboard
Antec Hcg-750 PSU
Evga gtx670 single card
my old rig Corsair H50 for now waiting on my custom built water cooling
i know i tried using the OC genie to test out their OC setting which gave me 4.2ghz with 1.336vcore and friend told me thats kind of high for a 4.2ghz?
any help will be good step by step. my goal for now is to reach like 4.4-4.5ghz until i get a better cooling system

Alrighty, appreciate the info; gonna back down to 4.4Ghz as I can maintain stability with 1.275 vcore in bios = 1.26 in windows = 1.24 under load resulting in hottest core never exceeding 70...was really hoping for 4.7-5.0Ghz overclock when most everyone who reviewed this chip in the early days was claiming such great overclocks with such low voltage. But I'll chalk that up to either misinformation or non stability checked overclocks, I guess I'm old school; cause if it can't hold up to a minimum 24hr pass of Prime 95 small fft's it isn't stable in my book. Might consider delidding it in a year or so once the new wears off, I had my i7 920 for about that long before I lapped it into a mirror shine lol. So based on my new information 3770k's on average overclock between 4.4-4.6Ghz and can require up to 1.4 vcore and higher past 4.6Ghz which is where you start to really become thermally limited on liquid as the Ivy Bridge's 22nm technology puts the cores to closely together in combination with intel's cheap ass thermal compound solution. Maximum recommended voltage for 24/7 shouldn't exceed 1.4 vcore without some kick ass cooling or a combination of delidded processor and kick ass cooling cause ideally you want your cores mid 70's and below...that about sum it all up?

Urgent need of assistance, MSI Z77A-G45 Thunderbolt Unknown problems

Recently I have built my first computer, a desktop with the MSI Z77A-G45 Thunderbolt motherboard, an Intel core I5 CPU and a NVIDIA Ge-Force GTX 650 TI Video Card, and a 850W PSU (way more than what is needed). The computer worked perfectly fine for about a week, I did not initially order a Disc Drive because I figured I could install windows with a flash drive (which apparently does not work) so I installed ubuntu for a while (irrelevant to the problem) I ordered the Disc Drive and when it came in I plugged it in and the computer would not turn on, so I spent a while trying to figure out why it did not turn on when the day before it worked fine, eventually after basically disconnecting almost everything and putting it back together it worked. But it had no signal to the monitor. I have no means of telling if it is a UEFI/BIOS problem, a video card problem, or a CPU problem. All 4 LED's for the CPU phase are constantly on, when before when the computer worked fine it would only have the first phase LED blink, so I believe it might possibly be a CPU problem, though the video card is what controls the output for monitors so it equally could be the problem. For the motherboard I tried just about everything to reset it, everything, except flashing the BIOS (which I don't want to try unless it is the only solution left) I tried to clear the CMOS, took the BIOS battery out and put it back in again. Please help!

I do not yet have access to another desktop in which to put my graphics card. I just tried reseating everything and still no signal to the monitor. The VGA port on my motherboard does not work, it never has for some reason, I did not get intel integrated graphics with my CPU, I am not sure if that is why the VGA does not work.

MSI Z77A-G45 can't install window 7 by raid 0

Similar Messages

Maybe you are looking for