MSI Z77A-GD65 Cannot Find Required Map Name

Hello, I am trying to do my first build ever and ran into an error with the MSI 7ZZA-GD65 motherboard. I tried to do a build outside of the case to make sure everything was running and I got an error when booting up my system. It states.
EFI Shell version 2.31 [4.6530
Current running mode 1.1.2
map: cannot find required map name.
Press esc in 1 seconds to skip startup.nsh, any other key to continue.
Shell> _
There isn't much plugged into the board right now I have.
CPU: Intel i5-3570k
RAM: 1 stick Billistix in slot DIMM 1
GPU: Asus Gtx 660ti
PSU: Seasonic M12 II 620w Bronze
I couldn't find anyone else getting the error so I posted here. Please help if you can.

Quote
RAM: 1 stick Billistix in slot DIMM 1
Is that the second slot from the CPU ? If not, then insert it into that second slot. Afterwards do a full CMOS clear, and then retest.
Also remove that GPU card for now and test with only the onboard graphics.

Similar Messages

P67-C43 "cannot find required map name"

Hello
Specs:
P67-C43
RAM: Gskill DDR3 1333 8GB
Video card: 4870 XFX 1GB
PSU: Antec 620W
CPU: i5 2500k @ stock 3.3ghz
DVD drive: Sony (don't know exactly)
HD: 1TB Samsung
& A Hyper 212+
I'm getting this message
EFI Shell version 2.00[4.640]
Current running mode 1.1.2
map: cannot find required map name.
Press ESC in _ seconds to skip startup.nsh, any other key to continue.
Shell>
I don't get that message when I take out or put in a new stick of RAM. Instead, I can go the BIOS and change settings or load default settings. If I choose default settings/boot then I get the message.
Any help please. Please don't tell me it's DOA :(

Quote from: petersonx on 14-May-11, 23:52:55
I don't get that message when I take out or put in a new stick of RAM. Instead, I can go the BIOS and change settings or load default settings. If I choose default settings/boot then I get the message.
Can you further explain on this part?
Do you already have an OS installed to the system? If you do, does the message pops up when you do the OS installation?

Cannot find the maps stored in import manager during port creation

Hi All,
I am unable to find any maps that i saved in import manager during port creation ,the maps are not showing in dropdown list during port creation in console.Do i need to store the maps that i have in import manager in specific place under mdm server,so that i can see them during port creation.
All i need to do is assign my import map during inbound port creation,but i cannot find any maps in console.
Could I know whether i am storing my maps some where other than default location.
Thanks
Aravind

Hi Aravind,
First of all check the remote system assigned to ur Port. After that go to import manager. When u logon to the import manager, u get a window "Connect to source". Mention the same remote system over there.Select the file type.Browse the file and map the fields,values,field matching and save the map. then unload the repo and assign the map to the port.
Second way is, u create the port first and give any particular remote system to it. Put the file (u want to use for mapping) in the ready folder of that port and in connect to source window select the type as port, remote system(ame as used port port) and port.then map and save. unload the repo and assign the map to port. Ready folder will be in ur server at location: C drive or D drive->SAP MDM 5.5 ->server->distributions->repo name->inbound->port code->ready. For this option, Ur port type should be manual. After assigning the map u can change it to automatic or keep it manual as per ur requirement.
Hope this solves ur problem.
Regards,
Dheeraj.
Edited by: Dheeraj Kumar on May 6, 2008 9:16 AM

MSI Z77A-GD65 No Post

When I first started my new system, I did get a display and entered the BIOS. I changed the boot order to put my optical drive first, put in a live CD, restarted, and got a black screen. I ejected the CD, restarted, and got a black screen again. I didn't get a display again until I disconnected all my drives whereupon I got a map error and was able to get back into the BIOS. A web search indicated this is a bug that occurs when no drives are connected so I reconnected the drives, restarted, and got a black screen again. I disconnected the drives again and restarted but I got a black screen again (no map error this time). I tried connecting my monitor to the graphics card instead of the motherboard and that didn't work. I tried removing the graphics card and video capture card and that didn't work. I tried clearing the CMOS by pushing the button and even removing the battery for several minutes and that didn't work.
Here's where things get weird. I tried testing the RAM by pulling out one stick and the system kept restarting itself: it would turn on then power off a few seconds later then, after a few seconds, start up again, etc. I had to wait till it powered off and quickly pull out the power supply's cord to get it to stop. I removed that stick and put the other one in instead and the same endless loop of restarting happened again. When I put both sticks back in it stopped restarting.
Since I couldn't get into BIOS A, I switched to BIOS B and got a display again. There was no option to restore BIOS A so I was forced to continue using BIOS B. Since my graphics card was removed at this point, I changed the BIOS to IGD instead of PEG for graphics and shut down. I reconnected my drives then restarted and got a display again and entered the BIOS. I changed the boot order to put my optical drive first, put in a live CD, restarted, and got a black screen. I ejected the CD, restarted and got a black screen. I disconnected the drives and restarted hoping I would get a map error and could get back into the BIOS but got a black screen again. I've tried switching back to BIOS A but still can't get a display.
I tested the RAM by putting it in my old desktop one stick at a time, and then both sticks at once, and it worked fine. I installed the optical drive and one of the hard drives into my old desktop and successfully installed and booted linux off of it with the no problems. The second hard drive does appear to be borked and my old desktop froze when I tried to boot with that drive installed. However I've tried starting my new system multiple times without that damaged drive connected and I still get a black screen so I don't see how it could be the problem.
The LED on the motherboard mostly alternates between 19 and 72. It will run through a bunch of codes too quickly to read then pause for a second on 19 (Early South Bridge Initialization) then run through a bunch of codes too quickly to read then pause for a second on 72 (Late South Bridge Initialization) then go back to 19, etc. I've sometimes also seen it pause for a second on 55 (Early Memory Initialization) and 4F (which doesn't appear in the manual).
I'm guessing it has to be the motherboard or CPU but I don't know which. I don't have another motherboard to test the CPU on and no other CPU to test on this motherboard (the old desktop is AMD).
Hardware:
MSI Z77A-GD65 motherboard
Intel Core i5-3570K CPU
G.Skill DDR3-1600 CL9 1.5v 4096MB (x2) RAM (tested in old desktop)
Seagate Barracuda 1TB hard drive (tested in old desktop)
Pioneer BDR-208DBK blu-ray drive (tested in old desktop)
Corsair Obsidian 550D case
Seasonic G Series 550W power supply
Samsung S23B550V monitor (tested with old desktop)
Currently disconnected hardware:
HIS Radeon HD 7870 GHz Edition graphics card
Seagate Barracuda 3TB hard drive (believed to be broken)
Black Magic Design Intensity Pro capture card

Quote
Here's where things get weird. I tried testing the RAM by pulling out one stick and the system kept restarting itself: it would turn on then power off a few seconds later then, after a few seconds, start up again, etc. I had to wait till it powered off and quickly pull out the power supply's cord to get it to stop. I removed that stick and put the other one in instead and the same endless loop of restarting happened again. When I put both sticks back in it stopped restarting.
Test each stick in Dimm 2 (2nd from the cpu) Make sure they are installed into DIMMS 2 & 4 (2nd from cpu and last)
Did you try a full cmos clear on Bios A?
If so, you can recover using this guide:
https://forum-en.msi.com/index.php?topic=160450.0
With the z77a-gd65, you will need to flash bios B to version 10.5. In that version in the security section is a multi bios update. Use that and it will recover bios A.
For bios flashing: >>Use the MSI HQ Forum USB flasher<<

SOLUTION for my problems with MSI Z77A-GD65 + MSI N670 PE 2GD5/OC

Lately I had problems with my GTX 670 video card (MSI N670 PE 2GD5/OC) under Windows 7 Pro x64.
I got a lot of "Display driver stopped responding and has recovered" errors.
I had these errors once or twice a day, so I didn't really bother looking for an answer, also I couldn't reproduce the error.
Most games just worked fine, but not always... so I tried if I could reproduce the error.
I tried to stress test with MSI Kombustor and voila no windows error... noo... but the core voltage went to 0 mV within a minute and everything (screen / windows / kombustor) stuttered and I had to restart the system.
The strange thing was that the voltage went to 0 mV, but the GPU load went from 96% - 60% and back to 96%... why and how is this possible??
Now I could reproduce my problem... yes!
First I thought it was a driver problem, because I updated it to the newest version (310.70), so I tried to re-install an older driver and also the original MSI driver... no luck.
Maybe it could be a mainboard driver or some settings in windows, so I installed Windows 8... no luck.
Re-installed Windows 7 Pro x64 (basically because Windows 8 s*cks)... no luck.
I tried to put my video card in another system and there was no problem... so I thought my video card is not broken...
Maybe it's my my power supply... new power supply... no luck again... grrrr...
My solution was downgrading / flashing my mainboard (MSI Z77A-GD65) bios back to 1.5 instead of 1.7, because yes... live update had updated my bios... that was the problem.
I wanted to post this, because I couldn't really find the answer for my problem and maybe I can help a few people with the same configuration and problems.
Live well and... well you get the idea

Quote from: flobelix on 21-August-13, 04:12:05
Don't use TF II/TF III parts as they won't fit. Arctic Accelero Twin Turbo II or Accelero Mono PLUS are good value for money aftermarket solutions.
Thank you for the information and advice. As I was looking into those two, I noticed that Accelero's website claimed the Accelero Xtreme III would also fit, and NewEgg had it on sale, so that is what I wound up purchasing. It works quite well and is MUCH quieter than the Twin Frozr IV, even before the grinding noise started.
For anyone else considering this, please be aware that the Xtreme III is monstrously huge (it adds several inches to the length of the MSI N670 PE). Make sure you have plenty of room in your case for it.

Found Error FRM-13008 Cannot find JaveBean with name oracle.forms.webutil.o

Create new form attached libraies WEBUTIL and Open webutil.old
drag WEBUTILCONFIG and WEBUTIL then create datablock,canvas WEBUTIL_CANVAS I double click canvas alert Found Error FRM-13008 Cannot find JaveBean with name oracle.forms.webutil.o
How to solve problem
Please Urgent
Thank you

formsweb.cfg
ific, named configuration (see below)
[default]
# System parameter: default base HTML file
baseHTML=webutilbase.htm
baseHTML=base.htm
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
workingDirectory=
envFile=default.env
escapeparams=true
# System parameter: base HTML file for use with JInitiator client
baseHTMLjinitiator=basejini.htm
# System parameter: base HTML file for use with Sun's Java Plug-In
baseHTMLjpi=basejpi.htm
# System parameter: delimiter for parameters in the base HTML files
HTMLdelimiter=%
# System parameter: working directory for Forms runtime processes
# WorkingDirectory defaults to <oracle_home>/forms if unset.
# System parameter: file setting environment variables for the Forms runtime processes
envFile=default.env
# Forms runtime argument: whether to escape certain special characters
# in values extracted from the URL for other runtime arguments
# Forms runtime argument: which form module to run
form=test.fmx
# Forms runtime argument: database connection details
userid=
# Forms runtime argument: whether to run in debug mode
debug=no
# Forms runtime argument: host for debugging
host=
# Forms runtime argument: port for debugging
port=
# Other Forms runtime arguments: grouped together as one parameter.
# These settings support running and debugging a form from the Builder:
otherparams=buffer_records=%buffer% debug_messages=%debug_messages% array=%array% obr=%obr% query_only=%query_only% quiet=%quiet% render=%render% record=%record% tracegroup=%tracegroup% log=%log% term=%term%
# Sub argument for otherparams
buffer=no
# Sub argument for otherparams
debug_messages=no
# Sub argument for otherparams
array=no
# Sub argument for otherparams
obr=no
# Sub argument for otherparams
query_only=no
# Sub argument for otherparams
quiet=yes
# Sub argument for otherparams
render=no
# Sub argument for otherparams
record=
# Sub argument for otherparams
tracegroup=
# Sub argument for otherparams
log=
# Sub argument for otherparams
term=
# HTML page title
pageTitle=Oracle Application Server Forms Services
# HTML attributes for the BODY tag
HTMLbodyAttrs=
# HTML to add before the form
HTMLbeforeForm=
# HTML to add after the form
HTMLafterForm=
# Forms applet parameter: URL path to Forms ListenerServlet
serverURL=/forms/lservlet
# Forms applet parameter
codebase=/forms/java
# Forms applet parameter
imageBase=DocumentBase
# Forms applet parameter
width=2000
# Forms applet parameter
height=800
# Forms applet parameter
separateFrame=false
# Forms applet parameter
splashScreen=
# Forms applet parameter
background=
# Forms applet parameter
lookAndFeel=Oracle
# Forms applet parameter
colorScheme=teal
# Forms applet parameter
logo=no
# Forms applet parameter
restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow_debug,allowNewConnections
# Forms applet parameter
formsMessageListener=
# Forms applet parameter
recordFileName=
# Forms applet parameter
serverApp=default
# Forms applet archive setting for JInitiator
archive_jini=frmall_jinit.jar
# Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)
archive=frmall.jar
# Number of times client should retry if a network failure occurs. You should
# only change this after reading the documentation.
networkRetries=0
# Page displayed to Netscape users to allow them to download Oracle JInitiator.
# Oracle JInitiator is used with Windows clients.
# If you create your own page, you should set this parameter to point to it.
jinit_download_page=/forms/jinit/us/jinit_download.htm
# Parameter related to the version of JInitiator
jinit_classid=clsid:CAFECAFE-0013-0001-0022-ABCDEFABCDEF
jinit_exename=jinit.exe#Version=1,3,1,22
# Parameter related to the version of JInitiator
jinit_mimetype=application/x-jinit-applet;version=1.3.1.22
# Page displayed to users to allow them to download Sun's Java Plugin.
jpi_download_page=http://java.sun.com/products/archive/j2se/1.4.2_06/index.html
# Parameter related to the version of the Java Plugin
jpi_classid=clsid:CAFEEFAC-0014-0002-0006-ABCDEFFEDCBA
# Parameter related to the version of the Java Plugin
jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,06
# Parameter related to the version of the Java Plugin
jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_06
# EM config parameter
# Set this to "1" to enable Enterprise Manager to track Forms processes
em_mode=0
# Single Sign-On OID configuration parameter
oid_formsid=%OID_FORMSID%
# Single Sign-On OID configuration parameter
oracle_home=C:\DevSuiteHome_1
# Single Sign-On OID configuration parameter
formsid_group_dn=%GROUP_DN%
# Single Sign-On OID configuration parameter: indicates whether we allow
# dynamic resource creation if the resource is not yet created in the OID.
ssoDynamicResourceCreate=true
# Single Sign-On parameter: URL to redirect to if ssoDynamicResourceCreate=false
ssoErrorUrl=
# Single Sign-On parameter: Cancel URL for the dynamic resource creation DAS page.
ssoCancelUrl=
# Single Sign-On parameter: indicates whether the url is protected in which
# case mod_osso will be given control for authentication or continue in
# the FormsServlet if not. It is false by default. Set it to true in an
# application-specific section to enable Single Sign-On for that application.
ssoMode=false
# The parameter allow_debug determines whether debugging is permitted.
# Administrators should set allow_debug to "true" if servlet
# debugging is required, or to provide access to the Forms Trace Xlate utility.
# Otherwise these activities will not be allowed (for security reasons).
allow_debug=false
# Parameter which determines whether new Forms sessions are allowed.
# This is also read by the Forms EM Overview page to show the
# current Forms status.
allowNewConnections=true
# EndUserMonitoring
# EndUserMonitoringEnabled parameter
# Indicates whether EUM/Chronos integration is enabled
EndUserMonitoringEnabled=
# EndUserMonitoringURL
# indicates where to record EUM/Chronos data
EndUserMonitoringURL=
[sepwin]
separateFrame=True
lookandfeel=Generic
# Example Named Configuration Section
# Example 2: configuration forcing use of the Java Plugin in all cases (even if
# the client browser is on Windows)
[jpi]
baseHTMLJInitiator=basejpi.htm
# Example Named Configuration Section
# Example 3: configuration running the Forms ListenerServlet in debug mode
# (debug messages will be written to the servlet engine's log file).
[debug]
serverURL=/forms/lservlet/debug
# Sample configuration for deploying WebUtil. Note that WebUtil is shipped with
# DS but not AS and is also available for download from OTN.
[webutil]
#WEBUTIL_CONFIG=C:\DevSuiteHome_1\forms\webutil.cfg
#WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilArchive=/forms/java/frmwebutil.jar,/forms/java/jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
archive_jini=frmall_jinit.jar
archive=frmall.jar
lookAndFeel=oracle
[webutilie]
IE=native
webUtilArchive=/forms/java/frmwebutil.jar,/forms/java/jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTML=webutilbase.htm
baseHTMLie=webutilbase.htm
archive=/forms/java/frmall.jar
lookAndFeel=oracle
[webutiljpi]
WebUtilArchive=/forms/java/frmwebutil.jar,/forms/java/jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljpi.htm
baseHTMLjpi=webutiljpi.htm
baseHTMLie=webutiljpi.htm
baseHTML=webutiljpi.htm
archive=/forms/java/frmall.jar
[tutoforms10g]
envFile=tutforms10g.env
archive_jini=frmall_jinit.jar,myIcons.jar,FormsGraph.jar
archive=frmall.jar,myIcons.jar,FormsGraph.jar
pageTitle=Oracle Forms 10g tutorial
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
form=tuto_forms.fmx
separateFrame=True
lookandfeel=Oracle
imagebase=codebase
width=2000
height=800
splashScreen=no
background=no
lookAndFeel=Oracle
colorScheme=blaf
logo=no
2 class path,create db packages,generate plx? how to set where? classpath,create public synonym? Please ask me step to set

Connection drops - MSI Z77A-GD65 Gaming

Hello there.
I've tried to search for a similar issue on the forums, and the interwebs in general, without any luck.
So recently I upgraded almost all the parts in my old computer, including the motherboard which is now a MSI z77A-GD65 gaming motherboard.
So, after my new setup, I'm having troubles with internet connection losses during gameplay.
The connection losses only lasts for around 5-10 seconds before I'm connected to the internet again, and it happens from every half an hour, to not at all, but it is an annoyance when playing games, as you can imagine.
I've been in contact with my internet provider every couple of days for the past week to see if it was a problem at their end. Although I got a new router, there doesn't seem to be a problem with the connection in general. They couldn't see anything on their end at least. And if I plug my laptop to the router via cable, I don't get the dropouts either.
So.. I'm faaairly certain it has something to do with the new hardware, more specifically, the motherboard. But I am not sure.
What I have done, is to check the connection, obviously.
I have also updated all drivers, using the LiveUpdate 5 tool that came with the motherboard (which was pretty intense since it updated the BIOS as well, and after that I couldn't boot until I reset the pins).
Anyways, drivers updated, couldn't find more recent ones.
I've checked if there has been a problem with the servers at the game company of the game I am playing, not the issue either.
Also, the yellow "warning triangle" at the connection icon in the taskbar is also showing for the brief moment of 5-10 seconds (not enough to do a troubleshoot)
I didn't have any problems with connection drops with my old computer, even at 8-9 hour gaming sessions.
Note that there doesn't seem to be any pattern in when the connection drops, as it can be from every half hour, to not at all during an evening of gaming. And there is no connection between what I am currently doing in the games I play, when the connection drops.
I hope you can help me out, because I have no clue at this point.
/thanks

https://forum-en.msi.com/index.php?topic=169393.msg1253379#msg1253379
Just use the forum flash tool w/ a fat 32 formatted usb stick:
>>Use the MSI HQ Forum USB flasher<<
The directions are posted with the bios. It is very easy.

MSI Z77A-GD65 going crazy after Windows 8/8.1 installation.

Hey so I decided to buy a new SSD and update my system to Windows 8.1 (coming from 7), mainly for optimal BF4 gaming experience, (I also intend buying a 290X lightning or two when they come out...) . But during the process I encountered a truckload of problems, my main one is this: I was using bios version 10.7 for almost a year, with a stable 4.8GHz OC (which I managed to get done after each bios flash since I built the rig in early 2012), everything went great - this was on Windows 7.
However when I migrated to Windows 8.1 my PC wouldn't boot anymore and after 5-6 attempts it did boot and it said that all my settings were reset to default, fine. I restarted and from then on it wouldn't boot anymore no matter what. The error code on the mobo is always "19" which in manual says it's Early South Bridge initialization. I have no ideea what to do anymore, I tried plugging out SSD, HDDs, GPUs, RAM sticks, clearing cmos with back panel button. It all boiled down to either not booting or going into a boot loop.
My only solution was to switch to bios B on the multi-bios switch which is running 10.2 an almost 2 years old bios. That beeing said I can boot normally now (and fast), and the system runs great but the bios version is so old that it does not let my 2x680 MSI Lightnings work in PCIE 3.0, only 2.0...
So i'm VERY scared of what to do next, because I don't want this second bios to corrupt as well.
I always flashed my bios with Live update 5, I did this with each new bios release and never had a problem but I read that the latest bios, 10.10 is buggy, and I don't know HOW to flash my bios to an earlier version, maybe even 10.7 or 10.8 in another way. Is there a way to safely flash BOTH bioses and to repair my A bios at the same time?
TL'DR, if there isn't any safe solution to my problem I might as well just press in OC Genie button and have a mild OC until sometimes next year when I'll get a new mb + cpu + ram anyway. But if there is one, please let me know.
Any imput is apreciated, THANKS!
full config:
CPU Model: Intel Core i7 3770K 3.5GHz| Corsair H100 push pull
Motherboard: MSI Z77A-GD65
Ram: 2x 4GB Kingston HyperX T1 Black Series DDR3 2133MHz CL11 Dual Channel Kit
Video Card: 2way SLI MSI GTX 680 Lightning 2GB DDR5 256-bit
Sound Card: Realtek ALC898
Storage: Corsair force GT 120 GB(OS) + 2x WD 1TB SATA-II 7200 RPM 32MB RE3 + WD 2TB SATA-III 7200RPM 64MB Caviar Black + WD 3TB SATA-III 64MB Caviar Green
Power Supply: Nexus RX-1.1K GOLD @ 1100W
Case: Cooler Master Storm Trooper + 8x Cooler Master SickleFlow 120 Red LED + Fan controller Scythe Kaze Master Pro black = negative pressure
Keyboard: Cooler Master Storm Trigger
Mouse: Cooler Master Storm Sentinel Advance II
CD/DVD: Asus DVD drive black
Monitor: Dell U2711 REVA07 IPS
Speakers: Logitech Z-5500
OS: Windows 8.1 Pro 64bit

I just found a post of mine (from another forum) from when the error 19 thing first started, this is what happend:
Quote
I decided to buy a new SSD and update my system to Windows 8.1 (coming from 7). And I encountered a truckload of problems, my main one is this: I was using bios version 10.7 for almost a year, with a nice 4.8GHz OC stable, everything went great - this was on Windows 7.
However when I migrated to Windows 8.1 my PC wouldn't boot anymore and after 5-6 attempts it did boot and it said that all my settings were reset to default, fine. I restarted and from then on it wouldn't boot anymore no matter what. The error code on the mobo is always "19" which in manual says it's Early South Bridge initialization. I have no ideea what to do anymore, I tried plugging out SSD, HDDs, GPUs, RAM sticks, clearing cmos with back panel button. It all bolied down to either not booting or going into a boot loop.
My only solution was to switch to bios B on the multi-bios switch which is running 10.2 that is almost 2 years old. That beeing said I can boot normally now, but the bios version is so old...
As you can see it had nothing to do with me doing a bad BIOS flash, actually not even the OC... isn't there perhaps a way to fix that A BIOS?

Cannot find OSB user name

A former colleague set up OSB on a server several months ago. Now I am trying to sign in the "file system backup and restore" area, and need the user name and password that was created. This must be a different user name than OSB Admin -- and of course it's not in our documentation for this server.
Is there a query or config file that might hold the user name? If not, what recourse do I have? Destroying OSB and rebuilding? It was a pain to get working in the first place. (OSB Express / Win2003 / internal DAT72 )
Thanks ...

Exception: Cannot find bean under name ...
Probable Cause: This is usually seen in association with a problematic Struts HTML SELECT custom tag. The Struts html:select tag behaves differently depending whether one or both of the name and property attributes is specified for its encompassed <html:options> tags. If the name attribute is specified, whether or not if the property attribute is specified, then a bean matching the specified name will be expected in some scope (such as page, request, session, or application). If the matching bean is not found in any available scope, the error above will be seen.
There are two ways to address this. The first approach is to put a bean in one of the scopes so that the html:options might be associated with it. The second approach is to not specify the name attribute and instead use only the property attribute.
Change your Frombean scope from "Request" to "Session", then it works.
Thanks,
Thagelapally

Cannot find Bean under name..

Hello everyone,
I'm new to struts, please be patient with me!!
I have a series of JSP pages with forms, when I submit a form, I store the contents to the database & take the user to the next page, if its an update action, I need to populate the forms on load.
The storing part & populating parts are working fine (using ActionForm) BUT the page transitions are not working. I mean, after storing to the database I send a "success" message & my next page is not getting loaded. I'm geting this error "Cannot find bean under name projectOverviewForm" (2nd form name).
Here's the code snippet...
struts-config.xml:
<form-beans>
<form-bean name="projectIdentificationForm" type="roi.form.ProjectIdentificationForm"></form-bean>
<form-bean name="projectOverviewForm" type="roi.form.ProjectOverviewForm"></form-bean>
</form-beans>
<global-forwards>
<forward name="identification" path="toolBg.identification"></forward>
<forward name="overview" path="toolBg.overview"></forward>
</global-forwards>
<action-mappings>
<action path="/identification" type="roi.action.ProjectIdentificationAction" parameter="method" name="projectIdentificationForm" scope="request" validate="false">
<forward name="success" path="toolBg.identification"></forward>
<forward name="nextSuccess" path="toolBg.overview"></forward>
<forward name="deleteSuccess" path="roi.welcome"></forward>
</action>
<action path="/overview" type="roi.action.ProjectOverviewAction" parameter="method" name="projectOverviewForm" scope="request" validate="false">
<forward name="success" path="toolBg.overview"></forward>
<forward name="nextSuccess" path="toolBg.scd"></forward>
</action>
</action-mappings>On searching on the web, I heard this error mostly occurs due to html:select but I'm not using it in my JSP.
Please let me know if I need to upload any more code? Any help would be greatly appreciated!
Thanks & Regards,
Vidya Shankar

Exception: Cannot find bean under name ...
Probable Cause: This is usually seen in association with a problematic Struts HTML SELECT custom tag. The Struts html:select tag behaves differently depending whether one or both of the name and property attributes is specified for its encompassed <html:options> tags. If the name attribute is specified, whether or not if the property attribute is specified, then a bean matching the specified name will be expected in some scope (such as page, request, session, or application). If the matching bean is not found in any available scope, the error above will be seen.
There are two ways to address this. The first approach is to put a bean in one of the scopes so that the html:options might be associated with it. The second approach is to not specify the name attribute and instead use only the property attribute.
Change your Frombean scope from "Request" to "Session", then it works.
Thanks,
Thagelapally

Syincing error message "Cannot find required disk" - Help!

I have a third gen 4gig nano that I got at Christmas. I added two CD's onto it when I got it. Now, however, I'm having trouble syning anything else - that's all I've been able to put on it are the two CD's even though I've added more into my library. I keep getting the error message "Cannot find required disk". Can anyone help me or tell me what I need to do?
Thanks in advance!

Even though you're not getting a -50, I'd check on the following document. (Your message is one of the possible symptoms of the problem outlined in the document.)
iTunes displays -50 error message when syncing iPod on Windows XP

JDK7 INSTALLATION FAILS WITH ERROR CANNOT FIND REQUIRED JAVA RUNTIME ENVIRONMENT

Hi
I am trying to install jdk7 on windows7 through command line with command java_ee_sdk-6u4-jdk7-windows-x64 -j "C:\Program Files\Java\jre7\bin". But it fails with error cannot find required java runtime environment in C:\Program Files\Java\jre7\bin. I have set the java_home and path environment variables to above path. Also I tried instaling through installer but it gave same error with null in path. Can anyone help?

Hi
I am trying to install jdk7 on windows7 through command line with command java_ee_sdk-6u4-jdk7-windows-x64 -j "C:\Program Files\Java\jre7\bin". But it fails with error cannot find required java runtime environment in C:\Program Files\Java\jre7\bin. I have set the java_home and path environment variables to above path. Also I tried instaling through installer but it gave same error with null in path. Can anyone help?

Msi Z77A-GD65 Does't start at all

hello !
I got my msi Z77a-GD65 yesterday and a I5 2500k;I tried to see if they work.
1- i Discharged my self.
2-got the MB out of the box put it on the electrostatique bag and on the box.
3- i installed the cpu carefully and successfully.
4-installed the RAM (1 stick of g skill ripjaws x 1600mhz 2 gb) on DIMM1.
5-installed the intel heatsink
6-and an old power supply that used to perfectly power my old pc(PENTiUM4)
After that i turned on the power supply.Waited a few second and pressed the power onboard button.
the motherboard did not start the fan start to spin for1-2 seconds and turned off,the cpu phase led 1 was luminated for 1 second and then all 8 phases have just flashed and the motherboards retarted and heve been like thet ever since.also the LED debug just flashed and didn't write anything.
please help.
Also there is a julper named JSVID1 right by the VRM heatsink it is not mentionned on the manual what does it do?

Quote from: HU16E on 30-April-12, 06:17:28
Also recommend to get a quality +12V single rail PSU.
Get at least a 80 plus certificated power supply, that is for energy efficiency certification but also means quality (not always by some unreliable brands).
Dint knew that i could advice brands, some support forums are quite picky even if that isn't write in the rules. So here it goes, Corsair, Antec, CoolerMaster, Silverstone, Enermax, Seasonic, NZXT, XFX, Super Flower, FSP. All these are good and reliable Power Supply brands.
Now you only need to see how much watts you need for your system, this one is simpler to use http://www.corsair.com/learn_n_explore/?psu=yes, next one more accurate but a little more complex http://extreme.outervision.com/psucalculatorlite.jsp

Error 55 Msi Z77A-GD65 Gaming

Hi guys,
I'm new in this forum..
I bought a new mainboard this is: MSI Z77A-GD65 Gaming.
My components are:
Intel i5 3570K
Asus Geforce 660 2GB
Ram Kingston Hyperx 2x4GB 1866Hz
The problem is, when i started for the first time the PC i read in the display "Error 55", I tried with the RAM in dual channel (1:2)(1:3)(2:4)(3:4) and in single channel with only 1 ram.
What I can do now?Have you already reported this problem? I can't even get into the bios, in practice, I was not able to turn it on the PC.
For more info you can contact me. Thanks and let me know as soon as possible pls.

Do >>Clear CMOS Guide<< with power cord removed, if no change, try with another and different type of RAM.
consult with memory support test list from msi web page

MSI Z77A-GD65 Intel 7 Series Motherboard Integrated Graphics

Hi i'm a newbie to computer parts and the computer world in general on what does what. I'm only 15 but i'm looking to upgrade my Mobo and CPU I have found a bundle (MSI Z77A-GD65 Intel 7 Series Z77 Motherboard and Intel Core i5-3570K 3.40 GHz Quad Core Unlocked Bundle) on tiger direct and it looks like a good deal. But before I buy it I WAS going to upgrade my GPU before I were to get a new Mobo and CPU. I've done some research on the MSI Z77A-GD65 and I saw it has integrated graphics, but I don't entirely know what that is. I was curious if that's a graphics card and if so what it compares to. I have a Nvidia GTX 9800 graphics card that's fairly old now and I was wondering if a Mobo with integrated graphics acted as a graphics card and if so what it would compare to. If you want to know anymore specs about my computer let me know and i'll be happy to give them out.

It's not the mainboard to have integrated graphics, it's the cpu. The Core i5-3570K has Intel HD Graphics 4000 integrated. The mainboard only offers the output connectors to use it. All current generation Intel cpus have integrated graphics which can be used or not. The HD Graphics 4000 is not meant for gaming of course and would perform worse than your GTX9800 in a 3d game. With a supported mainboard (like the Z77A-GD65) the integrated graphics can be used along the discrete vga for Lucid MVP to better performance and gaming experience (see for more details: https://forum-en.msi.com/index.php?topic=160519.0).

MSI Z77A-GD65 Cannot Find Required Map Name

Similar Messages

Maybe you are looking for