MSI Z77MA-G45 LGA 1155 Intel Motherboard z77 please help me

So i just got my MSI Z77MA-G45 LGA 1155 Intel Motherboard z77 slotted it all together all seemed fine untill it wouldn't recognize my hard drive. I currently dont have a dvd drive at the moment so i put all the files of the win7 and msi drivers on the same 8gb stick. When i search for storage intel and see compatible drivers it sees one in RAID which i install but nothing else seems to happen. Ive been in bios and switched it from ahci raid and ide, that ahci etc one and Raid appear to be the same out come ie no harddrive visable. IDE doesnt even load it gets to starting windows logo then black screen and yes a i checked the harddrive is on the bottom sata1. Is my motherboard just defective or is there anything else to try. Sorry i have no other computer to use other than my laptop hopefully get a dvd drive soon (in the post) and hopefully a ssd to see if its the harddrive but i dont think that will make much difference. Cheers for any advise

So now everything seems to be working fine, but when you are in windows, if you leave the computer at idle it crashes?
For now, go into uefi bios and hit f6 for optimized defaults.
Hit f10 save and exit.
Once you have entered the os, open cpuz and post screen shots of the spd tabs of each memory stick installed and the memory tab. (You can open multiple instances of cpuz and take 1 screen shot.)
*When you do this the bios will default to achi mode remember.

Similar Messages

MSI P67A-G43 (B3) LGA 1155 Intel P67 wont BOOT!

My pc
PSU:Ultra 650w
CPU: Intel Core i7 2600k
MOBO:MSI P67A-G43 (B3) LGA 1155 Intel P67
Video Card:ATI 6950 GIGABYTE 2GB.
HDD:SEAGATE 1TB
RAM: G.SKILL Ripjaws Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9D-4GBRL
Explanation
I recently changed my motherboard from gigabyte+amd 955(worked flawlessly) to an intel core i7 2600k and the current mobo, i kept all the previous components and now i am having trouble booting up my pc. It starts and all the comps seem to work no beep but the monitor LED turns off and on and there is not even a "no signal" notice therefore i dont think its my video card causing the issue.
What could it be? I heard that CPU is the least faulty component.
Is the memory compatible or should i switch? worked fine on previous build.
Or is it the mobo?

Thanks for the help it happens that it was my dumb monitor not working in hdmi or dvi controller. Funny cause the component works fine on my ps3.....
So no problem whatsoever just my monitor worned out and needs to rma because its been only 1 year.
But before you leave i had to remove the cpu to check if i put it right... and maybe some thermal contact worn off a little bit because the motherboard bios in the OC section is displaying 55 degrees celcious is that normal(the bar reaches red section)? Room temp 74 degrees. also hardware monitor displays 40 degrees celcious each core Which one should i believe.

Works: MSI Z77MA-G45 Motherboard

Just dropping a note to say that the MSI Z77MA-G45 motherboard with UEFI works perfectly under Arch. Initial installation was a little bit painful because I was installing from a USB drive that was not booted in UEFI mode. By following this guide and the installation guide, I managed to install refind, which got me into Arch, then I just repeated the GRUB2 installation steps to complete my install.
Systemd is a little weird and will definitely take some time to get used to, but I really like the new 100% manual installation method, along with the improved Arch bootstrapping and chroot'ing scripts. Very happy to see that this is still the same (but better!) distro that I used 6 years ago.

Using it along an AMD card is quite useless and therefor results maybe wrong. Try the 210 alone in the other slot. Also please list system specs: >>Posting Guide<<

MSI N210-512D2 Vid card doesn't display graphics with MSI z77ma-g45 motherboard

New Motherboard: MSI z77ma-g45
New Card: N210-512D2
Does not display graphics.
I stick a HIS Radeon HD 5450 in the MB and its fine. I stick the N210-512D2 in a old dell and it's fine.
Whats making the N210-512D2 Card incompatable with z77ma-g45 motherboard?

Using it along an AMD card is quite useless and therefor results maybe wrong. Try the 210 alone in the other slot. Also please list system specs: >>Posting Guide<<

MSI Z77MA-G45 limited Bios settings

Hi everyone,
I recently got a new motherboard for my 3770K, an MSI Z77MA-G45 and updated the Bios to Version 1.9.
I am a bit frustrated with this board because it doesn't provide some essential settings for overclocking:
- Cannot set the Turbo multipliers, it only allows to change the base frequency ones
- It won't let me specify custom Vcore voltages. It only allows me to select between a few offset values (+0.02, +0.04, +0.06)
Are the above limitations normal for the CPU+Board+BiosVersion combination?
I have seen on the web others with exactly the same board or the Z77A-G45, that provide lots of extra settings.
Is there an option in the Bios that would unlock extra settings ?
FYI, "Adjust CPU ratio in OS" is disabled.
Thank you!

Quote from: Froggy Gremlin on 02-April-13, 13:18:47
As mentioned, use the keyboard arrow keys to highlight the setting, then use the keyboard's 'numbers pad' + or - keys to change the value.
Thanks for adding the numlock and making that clearer Froggy Gremlin

Share memory on MSI Z77MA-G45 an 3570k

Hi all,
I have a MSI Z77MA-G45 mobo and a i5-3570k CPU. I use the integrated graphics.
On the mobo's spec page says that the maximum share memory is 1760MB. I can only set 256MB in the BIOS. Is there something else that I need to change to get more memory available?
On the system I also have installed 2x4GB of Corsair Vengeance memory.

Intel uses DVMT for VGA memory.
You can set a fixed value (up to 256MB) and set the DVMT to maximum if you want.
That should make the system assign up to 1760 MB if needed.
It is dynamic so it only assigns the memory it actually needs.

MSI Z77ma-g45 no powerup

my z77ma-g45 was working fine till i reseated the heatsink now it does not seem to want to power up. I have done a full teardown and rebuild, swapped ram(8G|CRUCIAL BLS8G3D1609ES2LX0) , checked the cpu (I5 3570) in another mobo (another z77ma-g45). swapped psu. removed all addin cards and cables. no beeps no lights.... no signs of damage or burns marks on the mobo, no bent pins (when swapped heat sinks nothing else was removed). any ideas?
edit~~~~~~~
so after working on this for two days i post here, and while waiting i decide to try one more thing, i move the cpu fan to sysfan1, and the disconnected sysfan1 to the cpu header, boom powers up.... turn it back off swap them, works again....
I choose to believe the people in this forum are wizards, and from afar fixed what ever was stopping the power on... thank you

So now everything seems to be working fine, but when you are in windows, if you leave the computer at idle it crashes?
For now, go into uefi bios and hit f6 for optimized defaults.
Hit f10 save and exit.
Once you have entered the os, open cpuz and post screen shots of the spd tabs of each memory stick installed and the memory tab. (You can open multiple instances of cpuz and take 1 screen shot.)
*When you do this the bios will default to achi mode remember.

Graphics driver details for MSI Z77MA-G45 and other motherboards

This is request for MSI to put more details of the on-board graphics capabilities.
My goal is to have four monitors by adding an additional PCIe graphics card.
Recent versions of Windows can only support multiple graphics cards if the drivers are essentially the same.
I would like to see enough information on the spec sheets for the integrated graphics so that I can decide what models of graphics cards I can buy so that Windows will work with my new card as well as the on-board graphics.
The spec sheet says Radeon but I think that there are many options in the Radeon family.
Thanks

Quote
This is request for MSI
Nice, but this is a Users-to-Users Forum so you are wrong here if an official MSI answer is wanted. >>How to contact MSI.<<
Quote
Recent versions of Windows can only support multiple graphics cards if the drivers are essentially the same.
What? Where have you read that. How should different vga adapters have the same driver. Windows 7 can handle different vga drivers

MOVED: MSI Z77MA-G45 and front audio header

This topic has been moved to Intel Core-iX boards.
https://forum-en.msi.com/index.php?topic=172950.0

Quote from: flobelix on 26-September-13, 01:58:46
Do the front USB headers work?
Also try the board out of case and put it on a non-conductive surface. Retry with basic components and see if font audio works if you connect it.

MSI Z77MA-G45 Undervolting

Hello there! I just OC'd my 3570k to 4.00ghz with core voltage set to AUTO. I also using Xigmatek Gaia SD1283. Is there a option to undervolt the cpu? When i change the core voltage its only gives my the options between AUTO, +0.0000v, +0.0020v etc. I want to undervolt so my cpu temp get lower. I am about 38-46o calcius. Thanks in advance.

Is the Vdroop option available on the G45?
(I don't think it is)
If it is however, just lower the vdroop % and the cpuv under load will be lower.

Pairing MSI Z68MA-G45 (B3) with Intel Core i5-2500K Sandy Bridge

I want to know if pairing these two together will allow for use of the HD 3000 graphics.
Meaning I am not buying a discrete video card because I can use the HD3000 graphics on the Intel CPU via this board.
I say the answer is yes but assurances are good
Thanks and apologies for any technical errors in my post

Just to make it clearer for you, on the CPU's with IGP on previous 1st & 2nd generation MB's you could not use the IGP on "P" (add on card only) series MB's, you needed the "H" (IGP or add on card) series for using IGP. The 3rd generation "Z" series added the capabilities for IGP "H" series into the "Z" series thus eliminating the need for a complete separate series of chipsets & MB's.

MSI Z77MA-G45 and front audio header

nice board, nice oc, but the front audio header does not seem to work(rear jacks are fine)
is there a bios setting i am missing?

Quote from: flobelix on 26-September-13, 01:58:46
Do the front USB headers work?
Also try the board out of case and put it on a non-conductive surface. Retry with basic components and see if font audio works if you connect it.

MSI 460GTX hawk problem beep .!! please help .

hi , i am new here, if i ask some stupid please forgive me ,
i just bought the MSI 460 Hawk last week ago, when i plug in to the motherboard , the beep sound is occur frequently, sometimes is 1 beep , sometimes 2 beeps , or 3 or 4 beep but i can starting the window and do anything , just because of the beep sound , make me headache. i have to connect two power connector from power supply to the card proper.
I changed back to my old graphic card , it work proper , no beep sound at all . my power supply should ok . Thermaltake toughpower grand 700W 80plus gold. But the poor thing is my motherboard only asus P7H55-M , will be my motherboard not able to support the card?..
I found out my mini HDMI converter which provided by MSI hawk card is spoil (the head of convertor totally loose ) (yes. i connect with HDMI cable between card and monitor).. that will occur the beep sound ?
and the card have the own speaker? cause i did troubleshooting, i do not connect to the speaker(system warning speaker, 4 pin speaker) at the motherboard , but i still can hear the beep sound. i unplug some of the connector, the hard disk power, dvd rom, the beep sound is occur , so i think is my graphic card problem.
Thx for Helping have a nice day
my pc spec :
intel i7 870
asus P7h55-m
4gb ram 1333MHz
1 TB hard disk
MSI GTX460 Hawk .
Thermaltake Tough Power 700W 80plus gold

see this topic: https://forum-en.msi.com/index.php?topic=142499.0

FX5950 Ultra VTD-256 or my motherboard? Please, help-me.

The problem
When i'm in a game which uses a lot of graphic power, like FarCry/NFS Underground/Ground Control II, with AGP 8x on, after a 30-40 minutes of playing, the game shows some graphics corruptions and, after a couple of minutes, all my system freezes, which forces me to reset my pc.
The problem sometimes occur when I try to play videos here.
What 'ive already done to try to solve the problem
Reinstalled my system
Installed the newest nVidia driver (61.77)
Installed Directx9c (the problem occurs with a and b versions too)
Upgraded my agp driver
Set up the voltage of the AGP slot to 1.5, 1.6 and 1.7
Some observations
This problem do not occurs when i set the agp to 4x
Even if I make my card works hard with a game like FarCry, the temperature stays at 60ºC
My CPU temperature in these conditions is 58ºC
The ambient temperature in these conditions is 38-40ºC
I have three 80mm fans helping with the ambient cooling
Using the system running videos or anything else but 3D applications is ok
My system
Pentium IV 2ghz
Motherboard ASUS P4S8X-X (SiS chipset) w/ lastest BIOS
MSI Geforce FX5950 Ultra VTD256 Card
Soundblaster live! Value
Pixelview PlayTV MPEG2 Card
2x 512mb ddr266 Samsung memory
2 Seagates HD - 40gb + 120gb - 7200rpm
DVD/CD-RW LG Combo
A 450W font
The dilema
Should I take another card from my dealer or should I buy another motherboard for my PC, since everybody says that SiS sucks and i'm really concerned about this chipset?
If I should change my motherboard, which one would you recommend to me? It can't be too expensive.
P.S.: Sorry about my poor English. I'm Brazilian.
Thank you for you advices in advance.

To sticks
Yeah, i've already done this. Those are the first this that i paid attention when I was installing the new PSU. And all motherboard drivers are properly installed.
Now, I'm almost catching a brand new motherboard, as I'm hating this one i have roght now with the SiS chipset. The model i'm buying now is a Asus P4P800 Deluxe.
1- Is it really a good buy?
2- In Asus website they say that this motherboard have support for DDR400. Taking this as a fact, will it support my both 512mb DDR266 memories, or just a DDR400 memory?
3- Thank you for all advices you're giving to me.
C'ya.

MSI (ALL IN ONE) MODEL 22XX CAN SOME PLEASE HELP, RECOVERY DISCS NEEDED

hi i just bought a MSI ea2260 006uk off somebody manual calls it a wind top series,
but it has windows 8 installed instead of the windows 7
so what it looks like has happened is the person who installed the windows 8
firstly not made a set of recovery discs and 2, has formatted the hard drive before hand so recovery sector has been deleted
and i dont seem to have much software on there to work all the AIO to its max
like there is no tv tuner software etc... but i have the tv aerial
there is also no dvd playing software and has blue ray drive etc etc etc.....
is there any body out there with the same or similar machine that is prepared to burn me off a copy of their recovery discs
that way i can get the machine back to how it should be
as i want to use it as a full media station,
i know that while booting up you should press f3 to get into the recovery menu but it just boots to windows
f11 does allow me to change boot up sequence etc...
i do have a disc with it but it only has drivers on it and no software etc....
i also have the manual and the windows COA sticker with number is on the back on the machine
so please please can somebody help me,
i will be willing to pay for any discs and
i have tried eBay but to no avail
even if your model isn't identical they still could work
and if any of you aint backed up your discs, make sure you do cos if you hdd buggers then you buggered too...
any help will be greatly appreciated
there is an small mini Aeriel socket on the back of the all in one touchscreen PC and an Aeriel was also supplied with it
so im assuming there is a tv card in there as it has all the option extras in the manual like sata connection, hdmi, remote control etc....
also if peeps can tell me what softaware is on their 22xx series one that may be a big help too
many thanks scott

Are you able to start in Recovery mode ?. OS X: About OS X Recovery
If so, then after the language choice screen, click Utilities at the top of the screen & choose Terminal.
Once Terminal opens, type resetpassword then press the enter key.
Choose your user from the list & follow the prompts to create a new password. Then restart the computer normally.
This won't allow you to update app store apps which the previous owner bought, but will let you install new software.
Ideally, you'd erase the HD & reinstall OS X yourself : you may be able to do that from Internet Recovery, but may need original install DVDs,
which Apple will usually supply for a small charge, if you call them with the serial number.
Computers that can be upgraded to use OS X Internet Recovery

MSI Z77MA-G45 LGA 1155 Intel Motherboard z77 please help me

Similar Messages

Maybe you are looking for