MSI Z87-G43 USB 3.0 problem - not recognize

Hello. My USB 3.0 device (pendrive Platinet X-Depo 32GB USB 3.0) gets power when plugged into the USB port, but the OS(Windows 8 and 8.1) doesn't recognize it. In the device menager USB device mass storage had a error nr 10 The device cannot start. Worked perfectly in Windows 7 (i'am install to tested) or in the port USB 2.0 (in Windows 8 and 8.1). I have actually BIOS 1.73 (before instaled bios 1.5, 1.6) and drivers for motherboard. On the standard BIOS (ver. 1.0) my pendrive don't recognized any port - 2.0 and 3.0.
I'm trying this method, but not worked for me:
//plugable.com/2012/12/01/windows-8-and-intel-usb-3-0-host-controllers
My configuration:
MSI Z87-G43 S/N: 601-7816-010B1305018448 - actually BIOS v1.73
i7 4770K
Gigabyte GTX 770 2GB
Kingstone SSD 128GB
Patriot 2x 4GB RAM
Chieftec 750W
Pendrive Platinet 32GB USB 3.0
Thank you for help me.
PS. Sorry for my poor English.

Attached is a beta bios sent from MSI.
>>Use the MSI HQ Forum USB flasher<<
They say they cannot duplicate the problem though. Here is the test they did, let me know what they can do to trigger this.
1.   Install System driver and reset
2.   Connect USB HDD to USB 3.0 port. The device can be recognized.
3.   Reboot the system
4.   Check Computer and still can find the USB HDD
5.   Power off the system
6.   Power on and check Computer.
Test System:
Z77A-GD65
BIOS: E7751IMS.A50
WIN7 64 bit
USB 3.0 driver: 1.0.4.225
Seagate FreeAgent Goflex STAA1500301 1.5TB

Similar Messages

MSI z87 G43 OC GENIE ISSUE/Bios UPDATE

Hi Everyone, This is my First time posting to the forums.
Here Are my System Specs Before I post the question
Motherboard: msi z87 g43
CPU: intel core i7 4770k (haswell)
RAM: Corsair Vengeance Ram ddr3 clocked at 1333mhz, 16gb, using 4 4gb sticks.
GPU: evga gtx 770 nvidia
PSU: Bronze certified psu at around 850 watt.
CPU COOLER: is a standard corsair single radiator water cooler
QUESTION/PROBLEM:
Ive had this computer built for about a year (basically right when the gtx 770 released). I have no problems with the device and it works perfectly. The motherboard however is where my problems starts to arise. I tried my hand at overclocking but ended up with a blue screen after some stress testing and just set my values back to default. But since then I really havent tried anything new with it. However, I noticed OC genie and I thought hey maybe Ill try this out for a chance. So I boot up and go into the bios set up (all values are default) and press the oc genie.As soon as the screen flashed back up I get a black screen and can not post. The only way to actaully fix this is to reset my CMOS which luckily I know how to do. But the black screen displayed also had a number letter combo at the bottom. It displayed 9C at the bottom in white. But when I get a successfull boot into the bios right beofre the bios logo I get a black screen with A2. But the A2 appears in every boot. Now heres where things get funky. I have a logitech Camera I use primarily for skype. When I have the device plugged in before the computer is booted. When I try to boot I get the black screen with the 9C, but when I unplug and reboot, I get the A2 and I get into my OS.
Now I tried overclocking again at 46 multiplyer with a 1.2v but When I did I get text saying its not successfull and resets my bios info, (which is cool considering oc genie didnt do this it just corrupts my CMOS).
So you must all be asking what version of the bios I have and the answer is 1.0....
Now I know there is a 1.9 and even a 1.A version which came out this year in 2014
The problem with this however is I know the dangers of flashing my bios and it can really screw up my mobo as in brick the darn thing. But from what I read, Live update form msi does not work and I shouldnt use it. But Is flashing the bios via the bios set up where there is a section specifically for flashing safe to do? With the oc genie not working im scared to try flashing my bios via the bios setup if that makes any sense
To wrap it up, is it a problem with my mobo, do I need to update my bios to fix it? If yes then what is the safest way of doing it since ive never done a bios update before (but i get the concept put the up date on a FAT 32 load it from it in the bios set up option let it do its thing and boom ) .

The method above does NOT apply to your board. Either use MFlash (bios + ME option) or use the below:
>>Use the MSI HQ Forum USB flasher<<
A.) Download the attached archive (E7816IMS_1A0.rar.rar) and place it on your desktop. Do not decompress.
B.) Download and install the Forum flash tool.
C.) Insert your FAT32 formatted usb stick.
D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
F.) Boot to the USB
G.) Now follow the directions and let the tool flash
H.) After flashing reinstall ME drivers in Windows: http://download.msi.com/dvr_exe/intel_amt90_mb.zip

Z87-G43 5.1 sound problems

Almost every day I was refreshing MSI driver site for my mainboard to see did new driver in a hope that my issues will be fixed, and when I saw driver update tonight was like a little child when sees a ice cream, but sadly problems didn't changed at all even after installing new driver :/
The thing is that there is no way I can activate "Speaker Fill" for my 5.1 speakers. I listen music, watch movies and videos only on my Front and Sub speakers, while Center and Rear won't work at all. Whatever I do ( Turn off or on Speaker Fill ) nothing changes
My all 5.1 speakers work only when I press "Auto Test" button in HD Audio Manager. Please, it's annoying to listen music and watch movies and videos with front and sub speaker only, while my Center and Rear Speakers lay there for nothing. My guess is that this is a driver problem. My friend have same speakers and when I enable Speaker fill in his Realtek HD Audio manager, all of his speakers works fine.
I appeal to MSI stuff to try fix this on next update of driver if possible ! Please ! Or maybe could it be my chip fail ?
Rest of my hardware
I5 3570k @ Stock
MSI Z87-G43 ( 1.2 Bios )
MSI GTX 760 Gaming ( 327.23 ) I tried to disable Nvidia High definition Audio to see was there some conflict, but problems still persist ..
SYS: Windows 7 X64 Ultimate

Quote from: sib0 on 11-October-13, 08:16:30
Almost every day I was refreshing MSI driver site for my mainboard to see did new driver in a hope that my issues will be fixed, and when I saw driver update tonight was like a little child when sees a ice cream, but sadly problems didn't changed at all even after installing new driver :/
The thing is that there is no way I can activate "Speaker Fill" for my 5.1 speakers. I listen music, watch movies and videos only on my Front and Sub speakers, while Center and Rear won't work at all. Whatever I do ( Turn off or on Speaker Fill ) nothing changes
My all 5.1 speakers work only when I press "Auto Test" button in HD Audio Manager. Please, it's annoying to listen music and watch movies and videos with front and sub speaker only, while my Center and Rear Speakers lay there for nothing. My guess is that this is a driver problem. My friend have same speakers and when I enable Speaker fill in his Realtek HD Audio manager, all of his speakers works fine.
I appeal to MSI stuff to try fix this on next update of driver if possible ! Please ! Or maybe could it be my chip fail ?
Rest of my hardware
I5 3570k @ Stock
MSI Z87-G43 ( 1.2 Bios )
MSI GTX 760 Gaming ( 327.23 ) I tried to disable Nvidia High definition Audio to see was there some conflict, but problems still persist ..
SYS: Windows 7 X64 Ultimate
Something is wrong here. You list your CPU as the i5 3570K and your MB as the Z87-G43. This cannot be true, as these 2 are not compatible!
Please clarify!
Yogi

MSI 945gz-f USB 2.0 Problem

Good day! I'm facing a problem with my MB MSI 945GZ-f USB 2.0 problem. I try to upgrade and downgrade the BIOS but still no help. Still i can't use the USB 2.0 feature of my MB, Is there anyone here facing same problem and can help me? I'm using windows xp SP2. Thank you very much!

I try to used backside and front usb slot, but still show me that i am not running with 2.0. Even in device manager There is no enhanced host controller. I have 2 MB same model, and I solved my problem with my 1 MB, solution I tried to downgrade the BIOS version but the other one Still no help. Also tried to update my Intel inf software but still cant find the enhanced Host controller. Please kindly help me with this problem. Thank you and more power!

Msi z87-g43 random 1 beep then BSOD then restarts plz help...

Heres the list of mods on my computer Below. everything is less than 6 months old besides the Harddrive witch I used from my 3 year old HP that I used to have. So anyways my Motherboard throws a 1 beep then BSOD then restarts every once and a blue moon like literaly every few weeks weather im gaming hard or not its just so random . I had it happen again today and prier to this time it happened like over 2 weeks ago. Ive tried reseting BIOS and also did Memtest on the memory for 6-7 hours or so and it passed and even made sure the memory was compatable with the Motherboard witch it is. So now im lost and don't know what to do...is it the HardDrive possibly??? SOMEONE PLEASE HELP....... :-(
Cosmos 2 case
msi z87-g43 motherboard
Intel i7-4771 CPU
2x4 GB Patriot Viper 1600 ( memory tested for 6-7 hours with memtested and passed )
Nvidia GTX 760OC edition 2gb card
3 year old sata 1.5TB harddrive
Windows 7 home 64bit
Thermaltake Smart Series 750w PSU

This could be one of many faults. Try here : http://answers.microsoft.com/en-us/windows/forum/windows_7-system/kernel-data-inpage-error-help-pls/94003454-5e1f-459f-89e8-1a555dc5e575
First do a Chkdsk. Choose Admin command prompt and type "CHKDSK /R /F" (without the quotes), press Enter. It will ask for a reboot, press Y, and let it do it's thing. It may take an hour or so depending on how many errors it finds. If you get a cascade of errors it is likely that you have a failing hard drive.
Anyway this is a good start.

MSI Z77A-G43 - extreme memory profile problem

Hello everyone,
I’d really appreciate a piece of help here. I’ve bought the MSI motherboard MSI Z77A-G43 and currently I’m having problems with my memory (slots 1 and 3). My PC has following specs:
-   MSI Z77A-G43
-   Intel Core i5 2500K (not overclocked)
-   RAM Patriot 2x4GB DDR3 1600MHz CL9 (PGD38G1600ELK) G2 Series
Everything is set to default values and works fine. But when I enter the BIOS, I see that the memory is automatically set to 1333 MHz. The memory has the XPM. But when I set the XPM (agressive timing, 1600 MHz) support (no other changes) and reboot the PC, it doesn’t work (endless reboot looping). Is there any way how I can make the XPM modus work? The memory is OK (tried on other MBs, XPM without problems), the CPU too. I tried overclocking, with slightly increased voltage I can easily reach 4,8 GHz on CPU, basically everything else is fine. The PSU is also sufficient (700W, OCZ). I can too set the memory on 1600 MHz manually, but the timing isn’t that good.
It’s actually a failure I can live with, but since it’s a brand new PC, I’d like to get the best out of it.
Many thanks
V.K.

Sometimes manually setting them works when XMP refuses to.
I don't know what the XMP SPD profile for that memory is, and a screenshot of your SPD and memory tabs would help.
However try the following.
Disable XMP and reboot so they are back at 1333.
Manually set it to 1600 and ensure manual setting of the timings to 9.9.9.24 see if that works.
If not set your DRAM voltage to 1,575V and see if that works.
It may be that your memory requires 1,65V, in which case, that is what you have to set. You should be able to see that in CPU-Z SPD tab under the XMP profile column.

Slow power on b4 seeing MSI logo (MSI Z87-G43 GAMING)

My question is, why it takes up to 10 seconds to power on before seeing the MSI logo.
My rig boots in Windows 8.1 Pro UEFI mode with RAID, see summary of rig below.
When booting it sometimes takes up to 10 seconds for the MSI screen to appear, the one with the MSI logo. Once the MSI logo appears the boot is fast, usually between 6 to 8 seconds.
Total boot time around 16 seconds
Please help thanks
System Summary
BIOS version
A.40
Operating System
Windows 8.1 Pro with Media Center 64-bit
CPU
Intel Core i3 4130 @ 3.40GHz 32 °C
Haswell 22nm Technology
RAM
8.00GB Dual-Channel DDR3 @ 800MHz (9-9-9-27) SPD Ext. XMP
Motherboard
MSI Z87-G43 GAMING (MS-7816) (SOCKET 0) 35 °C
Graphics
227ELH (1920x1080@60Hz)
Intel HD Graphics 4400 (MSI)
Storage
119GB M4-CT128M4SSD2 (SSD) OS installed on this drive
465GB Intel Raid 0 Volume (HDD)
465GB Intel Raid 1 Volume (HDD)
Optical Drives
ASUS DRW-24D3ST
Audio
Realtek High Definition Audio
PSU
Thermaltake Smart SE 530W
Other useful info:
BIOS settings
Windows 8 fast boot enabled with GOP, no secureboot
Fast memory boot enabled, I think this just means that it is skipping tests
IGP set to 1024mb dedicated video memory and 800mb shared
All drivers and windows updates are up to date

Yes, nothing suspicious there, everything loads perfectly. See result below.
From the moment this is displayed, it takes just 6 seconds for Windows to be functional. However, it takes around 10 seconds before this appears on the display.
To be clear, or at least for me to be clear, what you see in the screenshot is the BOOT and not the POST, during the actual POST (power on self-test), the user should not see anything on the display.
Is that correct or have I got it wrong.
BOOT
E7816IMS V10.4 02/21/2014
Intel(R) Core(TM) I3-4130 CPU @ 3.40GHz, Speed: 100.00x34=3,4003400.00 MHz
DRAM Frequency for DDR3 1600 MHz(Dual Channel)
DRAM Size is 8192 MB
Use Device total: 1 KBDs, 1 MICE, 0 MASS, 2 HUBs
Detected ATA/ATAPI Devices...
SATA Port1: M4-CT128M4SSD2
SATA Port2: DRW-24D3ST
SATA Port3: Hitachi HTS725032A9A364
SATA Port4: ST9250315AS
SATA Port5: Hitachi HTS721050CLA362
SATA Port6: Hitachi HTS721050CLA362
A2

MSI Z87-G43 gaming + i5 4690K compatibility

hello there
so, i built a new pc a few days ago and i decided to go with these 2 options (msi z87-g43 gaming + i5 4690K)
anyway, i saw that some people have issues and that it's kind of a roll of a dice whether this specific motherboard will boot with the 4690K or not. From what i saw, it depends on the motherboard's manufacture date and if it has a A5/A6 bios version or not.
now, what i'd like to know is; is there a way to check the bios version of the specific motherboard without opening the box? (i'll have my new hardware probably tomorrow)
i'm really thinking about getting another mobo, i'm not sure what i'll do though.. A friend told me, even though it wont have the A5/A6 bios version, it'll probably boot and i'll be able to update it through windows. He also told me there's a really small chance i'll need another cpu to update the bios and then put my cpu on the mobo.. As i said, roll of a dice.
Any advices/tips?

Quote from: Nichrome on 01-May-15, 00:25:19
There is no such A4 or A5.
http://www.msi.com/support/mb/Z87-G43.html#down-bios
Wrong board, he has Z87-G43 Gaming
http://www.msi.com/support/mb/Z87-G43-GAMING.html#down-bios
Quote from: jimas92 on 30-April-15, 21:32:04
but still cant figure out how can i see which bios version i have (i mean A4/A5/A6)
A=10, B=11, C=12 etc.
Interestingly the BIOS is newer than the board.

Z87-G43 gaming HDMI/DVI ports not working

Board: MSI Z87-G43 gaming edition
Bios: American Megatrends Inc. V10.3, 03/12/2013
VGA: AMD Radeon HD 7970/Samsung SyncMaster P2770
PSU: Corsair CS750M
Intel Core i5-4670K
MEM: 8gb
HDD: Plextor 240gb SSD
OS: Windows 7 64bit Professional
Can't figure why they don't work...I checked my CPU and it's supposed to support integrated GPU. HDMI and DVI work on my videocard so I know it's not a monitor issue. I believe my motherboard chipset drivers are up to date. Any ideas?

you could try to set it to IGD in your BIOS to get the Integrated only working (find a option in your BIOS that is set to PEG and change it to IGD and see how it goes)
NOTE: if you find that settings see if it has a both option!

MSI Z87-G43 clear cmos

Hi,
I need some help in figuring out how to clear the cmos on a MSI Z87-G43. I've read https://forum-en.msi.com/index.php?topic=31222.0 but they don't seem to apply on this motherboard.
The manual shows an image of two pairs of squares with a white square inside them (an attempt to depict the image below). The left pair is grey and labeled Keep Data. The right pair is black and labeled Clear Data. They both have the number "1" labeled above.
1 1
[ x ] [ x ] [ x ] [ x ]
Keep Data Clear Data
The manual says you should short this jumper to clear the cmos. So it seems there is just a pair of pins instead of a three-pin jumper that is refered to in the instructions (https://forum-en.msi.com/index.php?topic=31222.0).
Now I found a pair of pins located below the label JBAT1 and to the left of a pair of pins labeled JCI1. Are these the ones?
And how do I short them? I didnt recieve any jumpers with the motherboard. So maybe I have to order a pair?
Thanks!
tester1

Quote
Now I found a pair of pins located below the label JBAT1 and to the left of a pair of pins labeled JCI1. Are these the ones?
And how do I short them? I didnt recieve any jumpers with the motherboard. So maybe I have to order a pair?
Yes and you can short it with anything conductive (e.g. a screwdriver). You just need a temporary contact of the pins. Alternatively remove the battery for some time.

MSI Z87-G43 can't control fan speed

Hi, i just bought an MSI Z87-G43 and i'm using a i5-4670 on it (yeah, 4670 without the K).
I wanted the minimum noise as possible so i bought a Noctua NH-U12P SE2
Like the pictures shows it has 2 fans.
I connected the 2 fans on cpu1 and cpu2 fan and both BIOS and Commander Center can see them correctly, but both of them can't change the rotation speed.
Those fans have a 3 pins connector.
How can i do it? Now my CPU is cool and i like it, but a little more hot for a little less noise is a good deal (and my goal!)
thank you

As alternative you can get a fan controller like Sunbeamtech Rheosmart PCI Fan Controller, it should allow to use 4pin PWM singnal and convert it into voltage control,
Quote
Product Details:
Smart Way Controlling all Fans & Airflow. The Rheosmart PCI Fan Controller is designed to make any existing 3-pin fan automatically regularized by the PWM signal from the Motherboard! With its ability to connect two fans to a single PWM connector at a maximum of 20W/channel, a wide selection of fans can be supported. When a normal fan is connected to the Rheosmart PCI Fan Controller, they become auto adjusting through the PWM signal.
The Rheosmart PCI Fan Controller operates in two different modes; when connected to a PWM-enabled motherboard you can allow the system to auto-adjust fan speed through he motherboard's temperature sensor. When switched onto manual mode by the pushing of the lever-switch to the right, you turn the connected fan onto manual control mode.

My computer has Bitlocker encryption. When I plug in my iPod Shuffle to the USB port, iTunes does not recognize it.

My computer has Bitlocker encryption. When I plug in my iPod Shuffle to the USB port, iTunes does not recognize it. When asked to encrpt the Shuffle I say no, but still not recognized. When I encrypt it, still not recognized (even after it was restored by iTunes). Any suggestions please?

Did you find a solution?
My touch is doing the same thing.

HT5634 I already install bootcamp 5 on my Macbook Pro MD101 (Mid 2012). But when I plug the USB, my Mac can not recognize the USB or any Storage device. Pls help

I already install Bootcamp 5 on my Macbook Pro MD101 (Mid 2012) but when I plug the USB, my Mac can not recognize the USB, also any storage device. Pls help !!! I am using Window 7

I ran an Apple Hardware Test, says ''No trouble found'.

Been trying to use an external memory card reader with my macbook air- connecting via usb port, air does not recognize device nor the microSD card from my gopro - help

Been trying to use an external memory card reader with my macbook air… connecting via usb port, air does not recognize device nor the microSD card from my gopro … help

Some external ones do not work with the Mac's although most do. There are some driver compadibility issues with Mavericks, so I would wait for an update.

MSI Z87-G43 Gaming and R9 290 OC Windforce not playing nice

Hi, already tried search but can find a solution, i have an Z87-G43 Gaming(Bios 10.30) and bought an Gigabyte R9 290 OC ref:GV-R929OC-4GD-GA(BIOS F3L). All is on latest Firmware/BIOS.
The problem is that the motherboard wont recognize my 290 on first PCIE 3. It works on second 16x slot. THe thing is... An Gigabyte 7950,Sapphire 7970, Unknown NVIDIA 7200gs all work in the first slot... now that i got bf4 my 290 doesnt work in the first slot... Latest bios from MSI say's vga compat. improved. The computer boots fine with the integrated vga and in bios it shows the first slot as empty. Anyone?

Like I said best to contact both and see what you can do. When I check VBIOS for MSI cards, there are normally newer versions available, so best to check. On the other hand if it is a bios issue, MSI can get on it.
>>How to contact MSI.<<

MSI Z87-G43 USB 3.0 problem - not recognize

Similar Messages

Maybe you are looking for