MSI Z87-G45 and BSoD all time

Hi,
my configuration:
MSI Z87-G45,
i5 4670k
2x8 GB ddr3 Patriot Viper 3 1600MHz CL9
Radeon HD 6870
PSU Corsair 550W
HDD SATA WD 500GB
SSD Corsair Force 3 128 GB
Windows 7 64bit
...and i have BSOD all time... At first I thought that the problem is SSD, but yesterday unplugget him and put normal HDD. And still got bluescreens. I updated BIOS to version 1.4, restored default settings and I tried to manually set the memory and enable/disable XMP profile. Memtest86 passed without problems. I changed SATA ports and dunno what more to do. Help please.

Quote
no BSOD so far, so this mean that first ram piece is bad?
Have that RAM kit exchanged. Perhaps even consider a Corsair Vengeance or Vengeance Pro. http://www.corsair.com/us/memory-by-product-family/vengeance-pro-series-memory/vengeance-pro-series-16gb-2-x-8gb-ddr3-dram-1600mhz-c9-memory-kit-cmy16gx3m2a1600c9.html
Quote
IRQL_NOT_LES_OR_EQUAL 0x0000000A
This Stop error message usually occurs during installation when there was an attempt in kernel mode to touch pageable memory at too high a process internal request level (IRQL).
Ouch, I just rechecked your screenshot. That XMP profile calls for a CR of 3T. Your setting is 1T. That is one probable cause as per the error explanation above.
I would consider an alternative kit as 3T essentially points to a lesser quality memory chip on those modules. You can of course attempt to manually set your CR to 2T or 3T and see if it works for you.

Similar Messages

Problem with MSI z87-g45 and gigabyte GTX 770

Hello, I just built my new computer useing a Z87-G45 gaming motherboard and a Gigabyte GTX 770 graphic card, reason Im making this post is because I cant get a any video on the monitor useing the Graphic card, only way to get the monitor working is to use the Integraded graphic, I've tried all ports on the Graphic card same problem, i've switched monitor no succes.
Weird thing is, Inside BIOS when Im looking on the overview of the board it tells me that I dont have anything connected in the PCI-E slots, I've tried to switch PCI-E slots and same issue appears.
How do I fix this? or cant my graphic card be DOA? since my old one works in the PCI-E slots as normally

Update the bios to the most recent found here: >>BIOSes<<
Extract the bios file and place it on a fat 32 formatted usb stick and use M-flash w/ ME.
Then re-test.

MSI Z87 G45 and Intel 4670k Turbo Boost Option Missing?

In my BIOS (V1.6):
I go into OC>CPU Features and Turbo Boost is not there, I have seen the bottom setting about using Intel's Turbo Boost, to UNDERCLOCK when needed, but I see no Feature to activate Turbo Boost or for some reason has this feature been taken out of V1.6?
Also note that I accidentally reset my XMP RAM profile and is now back to 2400MHz.

Not quite sure but this should be in just OC. Also you don't have to enable turbo boost but manually increase frequency using + and -, leaving all other settings at auto.
You will find there things like Frequency mode (not quite sure how it's worded) so you can either set it to be e.g. 3.4ghz all the time (idle too) or adaptive so when idling, it goes down to 1.5ghz (around..). Look carefully.

Is MSI Z87-G45 compatible with Be Quiet Dark Rock 3 and TridentX ?

Hello,
I have a MSI Z87-G45 and 2 DDR3 TridentX (from 40 mm tall without heatspreader to 53mm with it) in dual channel mode.
I'd like to mount a Be Quiet Dark Rock 3 with rear air extraction, front heatsink fan, and my DDR3 in dual channel mode (slot 2 and 4). Is it compatible or will I encounter clearance issue with DDR3 ?
Thanks

I bought the Dark Rock 3 from Be Quiet and I confirm that it is perfectly compatible with both TridentX and MSI Z87-G45 but we have to sacrifice the DDR's first slot (2, 3 and 4 still available).

MSI Z87-G45 doesn't boot, doesn't beep

Hi guys,
I just received my new MSI Z87-G45 and put it in my pc with my Intel Core i5-4670K
When I first tried to boot, nothing happened, except the fans and the hard disk. It doesn't beep and I see no screen. I switched the RAM, removed the graphics card, removed the hd, nothing worked.
Just the fans are going on, but nothing else happens.
I had a look at the cpu socket and wasn't sure if it is how it is supposed to look like (my first intel board) so I attached a picture. The pins look kind of weird, not sure about them:
Any ideas what I could try?

Thanks for your replies.
I did a CMOS several times (everytime after removing a component) - didn't change anything.
I just wasn't sure if it's generally normal, that the pins are not straight upwards like on amd cpus. But I already saw on some other pictures that that seems to be normal. The pins are all equally and none of them is at another height level. So that doesn't seem to ba a problem.
Board: MSI Z87-G45 Gaming
Bios: Stock (not sure which one that is)
VGA: HIS AMD Radeon R9 280X IceQ X² Turbo Boost Clock 3GB GDDR5
PSU: Enermax Revolution X't ERX530AWT
CPU: Intel Core i5-4670K Box, LGA1150
MEM: Corsair XMS3 CMX8GX3M2A1333C9 (also checked with Kingston KVR1333D3N9/2G
HDD: none
OC: -
OS: none (old was win7, but I don't even get to the BIOS)
I also noticed that the case fan doesn't seem to get power. It doesn't move.
I have a speaker installed to the motherboard. My old board always beeped.
Thanks again for your help!

Z87-G45 and 7970 problem

Sunday, I got a brand new MSI Z87-G45 and 4770k as a nice upgrade. Ive finally got the things working this evening, and the integrated graphics are running fine. However, when I attempt to utilize my 7970, no video output is available. The card is seated, the card works (last tested 2 hours ago), the card is powered, the fans are spinning up, yet still no video output is provided. Ive attempted to remedy the problem with another graphics card as well, and then with the two in crossfire, but still I have no out put. Help me msi forum , you're my only hope.

Hi and
Plz insert full spec list in next post like Svet asked.
Quote from: ThatSexyBatman on 22-October-13, 09:15:12
Sunday, I got a brand new MSI Z87-G45 and 4770k as a nice upgrade. Ive finally got the things working this evening, and the integrated graphics are running fine. However, when I attempt to utilize my 7970, no video output is available. The card is seated, the card works (last tested 2 hours ago), the card is powered, the fans are spinning up, yet still no video output is provided. Ive attempted to remedy the problem with another graphics card as well, and then with the two in crossfire, but still I have no out put. Help me msi forum , you're my only hope.
Take the pc a part and build it without case and try again.
I hope this helps! Cheers Mummy
Edit: I dont member if that board come with power button, but if not you can use jumper(or other tool) betwean those power button pins (be careful to not jump wrong pins!) a secend to start it up.
Edit 2: Quote
The card is seated, the card works (last tested 2 hours ago), the card is powered, the fans are spinning up, yet still no video output is provided.
Did you use same PSU?
If it dosent work without case, then take your system bear minimum (MB, CPU, PSU and that GPU. Mayby memory too, but you can test it. Should you need it with that on board vga and no memory in) and try again.
If that dosent help, i would ask RMA from shop that sell you that board or straigth from MSI.

MSI Z87 G45 GAMING erratic BSOD/freeze @ 2300, stable @1600. Can't solve.

Hi All,
I would welcome some advice. I am about 4 months into a new machine build:
* MSI Z87 G45 GAMING motherboard
* i7-4770K Haswell 3.5 GHz & aftermarket heatpipe cooler
* 4 x 4Gb G.Skill SNIPER DDR3-2133 PC3-1700 (F3-17000CL11D-8GBSR)
* GeForce GTX 650 Ti w/ 2 Gb Video RAM
* Samsung 840 Pro 256 Gb SSD
* Thermaltake 700W Toughpower
* Win 7 Pro 64-bit SP1
The system seems to run fine at the default 1600 MHz RAM speed, however if I implement either of the X.M.P. profiles (which kick the memory speed up to the RAM's advertised speed of 2133 MHz), the system will occasionally (every 8 to 48 hours) freeze or BSOD. The BSOD stop codes are inconsistent in number (0x00, 0x41, 0x1E, 0xC4) and driver. When the system freezes, there is no consistent behavior. I am not doing any other overclocking besides using the X.M.P. profile in the memory.
RAM timing on the 2133 X.M.P. profile is: 11-11-11-30.
I have updated the BIOS to 1.5, including the ME, and updated all drivers in the system. All irrelevant hardware and drivers are disabled. Also I have done the following:
* MemTest+ 5.01 for over 30 hours, all 4 sticks in. No errors.
* Intel BurnTest on 'Very High', 10 passes, no errors
* Prime95 for over day with 90 C CPU temps constantly being hit. No errors.
* Unigine Valley Benchmark for 30 minutes; no issues
I increased V_DRAM from 1.60V (from the XMP profile) to 1.65V, and I also added +0.10V offset to increase the CPU I/O ANALOG , CPU I/O DIGITAL and SYSTEM AGENT voltages. Didn't seem to help. All other CPU voltages are default from [auto].
I rolled the memory speed back to the default 1600 MHz, and the system seems stable as a rock.
I don't really need to have the memory run at 2133 MHz, but it irks me that the system is not stable with the rated components, and I'm befuddled why the stress tests seem to pass just fine, then the system will randomly hang with arguably a far less demanding load than the stress tests.
Note that I have not yet:
* reset the CMOS when changing to X.M.P. Perhaps I should?
* reseated the graphics card or CPU. The latter will require R/R of the thermal grease, which I will do if needed, but it's a pain. Since the system is stable at 1600 MHz, I assumed that all basic systems are working as they should.
* Tried to work my way up in memory speed step by stem from 1600 to 2133 to see where things fall apart.
* Tested the video memory
I suspect main system memory, despite the clean bill of health from MemTest, and based on many of the comments to others with similar problems from the veterans on this board. I don't want to push the CPU voltages too much above the default/auto values, for fear of damage and reduced lifetime.
Also, the power supply is a nice unit from an older high-end gaming rig. It is rated at 700W. The PS does probably have over 30,000 hours on it (24/7 use for 3-4 years), however. Strange that it would work at 1600 MHz fine, and with only slightly more power load at 2133. I suppose stranger things have happened.
I've read the suggestions to run only 2 sticks, rather than 4, but I can't justify dropping $140 on new memory (I don't really need the extra speed benefit, it's more curiosity and just not knowing at this point).
Anyway, perhaps more seasoned souls than I can share their thoughts. The system is perfectly usable at 1600, but I'd really like to know where the lockups are stemming from. Troubleshooting is maddening because of the inconsistency in the long times before failure and lack of repeatability to reproduce the issue.
Thanks in advance for your time.
-Paul

Thank you both for the prompt replies. I'm learning a lot.
Turns out I also found this from G.SKILL in going over reviews of the memory modules I have. Another user had a similar configuration as mine and was having similar problems. G.SKILL replied:
Quote
We are sorry to hear you were unable to get two kits working in the same system. It is not guaranteed two kits can operate at the rated specifications since they were not pre-matched, tested, and guaranteed at factory. With multi-channel motherboards, perfectly matching memory is necessary to achieve high frequency. This is why we must offer high capacity 32GB, 64GB kits, otherwise we can just sell one module at a time and have you purchase as many as you need. Unfortunately, memory does not work that way. If you purchase a 16GB kit rated at DDR3-2133, you should have absolutely no issues. For any further questions or concerns, please feel free to contact us directly for assistance.
Thank you
GSKILL SUPPORT
Not knowing any better, I simply purchased two "kits" of 2x4 GB each and installed them. Perhaps worse, if the modules were matched, I may well have mixed them up so the matched modules don't even sit in the same channels 1/3 or 2/4. G.SKILL seems to have a pretty responsive board, so I'll ask them what they suggest.
Also in the end, I really just want a stable machine. This is a basically an office/engineering machine. My initial thinking was that if the system was unstable at 2133 then there is something wrong with it that needs to be fixed. It sounds instead like getting to 2133 is not guaranteed, and is much more of an art than simply throwing the modules in and powering up the system.
I'm perfectly happy at 1600 knowing the system is stable. Indeed realizing now that 2133 requires overclocking, I may well have backed off to 1600 even if everything had worked just fine at 2300, just to trade extra stability for the (small) performance improvement that I would likely never notice anyway.
I'll put together a post for the G.SKILL forums, and if I get anything useful I'll post what I learn here for completeness.
Thanks again for the fast and informative replies. It's much appreciated.
Best,
-Paul

MSI Z87-G45 Gaming and Sapphire 290X, cant get it to work!

Hi, MSI Z87-G45 Gaming and Sapphire 290X, gpu fan is spinning, but black screen, only int. graphic is working. Downloaded all updates, bios 1.7 for mobo.... what else.....Any ideas?

Its not verified.
I got Sapphire to work, seems that drivers problem or something is maybe broken(mobo or gpu).
Thanks for link!
Just in the middle of the action, I got this picture.
What can cause that?

MSI z87 g45 Boot up issues

So I built a computer for my sister and her husband and it has been having some boot up issues,Here are the computer parts:
wiindows 7 64bit
MSI Z87 G45 Gaming motherboard
INTEL CORE I-7 4770K 3.5GHZ
RADEON HD 5700 GPU
G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1866
kINGSTON 64 GB SSD ( spare part, not sure the numbers)
Sunbeam PSU-H680-REV-US 680W ATX 12V 2.0 Power Supply - OEM
Seagate Barracuda ST2000DM001 2TB 7200 RPM
ASUS Black 12X BD-ROM 16X DVD-ROM 48X CD-ROM SATA Internal Blu-ray Drive Model BC-12B1ST/BLK/B/AS
I've cleared both the HDD and SSD and now I'm looking to check the msi z87 g45 mobo, The computer starts up and sits on a2 for a while and then sometimes it fails to detect the SSD and says a0 and then I have to go back into the bios after I reset the computer again and maybe it detected the SSD and I can set it to boot from that again because it constantly changes the boot order, and sometimes it gives a blue screen when nearly into windows and then restarts, I had transferred some data from their old computer to this one and the data had virus's in it and I didnt know so I eventually found out and a day later and got rid of them all and the computer started behaving better but not fixed, faster mainly, I don't know if the virus may have altered some files so, I have a few more things to try, any help would be appreciated.
(Something I forgot to mention is that when I unplugg the HDD all the issues go away, the computer seems to work fine, But there are no issues with the hdd, ive tested it with seatools and I plugged it into my computer and restarted mant times as well as used my computer for a while and nothing, the HDD is fine, the start up on their computer sits on a2 for a long time when it isnt going to work and it only happens with the 2tb seagate HDD plugged in)

which storage drive holds the boot files the SSD or the HDD? the ATA mode of the BIOS needs to remain in the same mode it was when Windows was deployed to the storage drive. next the only way a BIOS settings will change with out user input is if the Li cell battery is going dead/the BIOS is getting reset frequently. sounds like you're about at square one, I'd format the Seagate 2TB HDD, install windows onto that either in RAID or AHCI mode whichever your preference, you can use the 64GB SSD as caching later if you use RAID mode, if AHCI the 64GB could be spare. I don't understand the SSD as boot drive method, it doesn't make sense the solid state storage is volatile meaning it degrades over time, the HDD isn't and the performance gain isn't going to change the way you use your PC. AHCI has it's advantages it's up to you. Following those steps is the only way you're going to keep the computer booting on a regular basis. You shouldn't need to manually configure which storage drive to initialize/boot from first, the BIOS automatically goes through your devices to find boot files then boots from the first one with boot files, it won't even try to boot from a device without boot files, because it can't. Just to reiterate the BSOD you speak of sounds similar to the ATA mode changing to something other than what it was when Windows was deployed to the device.

MSI Z87-G45 problems

I'm having issues (again) with the MSI Z87-G45 motherboard. This is a replacement board from having to RMA my initial purchase. Brand new build and I cannot get any display. I have reseated the cpu, ram, and graphics card multiple times. I disconnected everything from the motherboard except for the essential items and I still do not get a display. I tried without a graphics card and was still unable to get a display. When using DVI the monitor goes into standby mode. When using VGA the monitor doesn't recognize it's hooked up to anything. I use this monitor on multiple computers in my house so 10000% sure it is not the monitor. All components are out of the case.
Components I have tested:
cpu: Intel Pentium G3258, Intel Celeron G3220
Motherboard: MSI Z87-G45
gpu: MSI R9 280, MSI R7 260, no gpu
psu: EVGA 750w 80+ Bronze, Corsair CX430w 80+ Bronze
ram: Pny XL9 1600 DDR3 8gb stick, Kingston Fury 1866 DDR3 8gb stick
Is there something I'm missing or is this as simple as I received another bad board?

So...
Quote
ram: Pny XL9 1600 DDR3 8gb stick, Kingston Fury 1866 DDR3 8gb stick
Are you mixing RAM??
Did you try to reser CMOS? >>Clear CMOS Guide<<
When I was very beginner, I had a computer with GPU, and I had similar problem: no display. Well, I was smart enough to plug my HDMI to on board HDMI port even though there was a GPU. So please make sure that you plug the cable to the graphics card.
Can you try different video cable? DVI/VGA/HDMI.
Intel Pentium G3258 will NOT work as your board BIOS is probably earlier than required for this chip to run properly.

MSI Z87 G45

hi, just recently i've bought this board, my USB keyboard not working on the POST there, but in the windows its okay. i tot it would be the bios usb legacy enable/disable. i use the other keyboard and went to enable the usb legacy, but still the previous usb keyboard still not working by the POST time. i just dont want to switch to other keyboard when i wanted to go to the bios.
Any idea what's happening?

"lifting this topic up" !!
First of all my specs;
Intel Core i7-4770K 3.5GHz
MSI Z87-G45 Gaming, Socket-1150
MSI GeForce GTX 760 Gaming 2GB
2x Corsair Vengeance DDR3 1600MHz 4GB CL9
1000w PSU
sata 3 500gb HDD
I recently bought 2 of theese MB:s, one for my computer and also i build a computer for my GF..
im struggling ALOT with my keyboard sometimes not working neither from startup or in windows..
i have been updating BIOS to the latest, and while doin that i noticed in the info that there was some USB issues that had been "corrected".
Well apperently this issue i have is a pain and it wont give in.. i have been tryin 3 other keyboards and at the point its not working, no keyboard is working, EXCEPT, for the one i use for GF computer, wich is a wireless Logitech k850 something keyboard, That one works like a charm, but none of my wired ones..
Strange thing tho, is when it is working, i tapped into BIOS to check if there was some USB setting to change or smth, but nothing.. tho i noticed it said i had 2 keyboards installed o.O, 2 ?! no i only have 1..
Why does it say 2?
One more thing just, while keyboard aint working, my Bluetooth stick works, USB memory works, Mouse works, and External usb3 disc works..
Yet it says this in the USB setting that i have 7 of 8 unused ports, and 1 port with unknown device..
anyone know the solution to this? :3
Please write a line or two so i can fix this!
Best regards // Emil
PS; sorry for bad english, im from sweden.

Overclocking Help .... MSI Z87 G45 with i5 4670k

Hi guys first of all i want to say MSI ROCKS!!!!!....
Purchased my first ever MSI motherboard and very satisfied from it ..... the looks are killer and now i want to see if its killer in OC as well ....
My specs are as follows:
MSI Z87 G45 (bios version 1.7)
Core i5 4670k
GSKILL Rip Jaws 8gb (4x2) 2133 mhz (but running at 1600)
Sapphire R9 290 TRI-X OC 4GB
Corsair GS800 800 watts psu....
Now my goal is to get safest OC around 4.2 - 4.4 ghz with minimal voltage and fully stable ..... its my first time with K series processor and there are just so many settings in the BIOS .... I know how to change the multiplier and CPU voltage and i tried doing 4.4 ghz @ 1.15 but it wasn't stable in AIDA64 stress test .... so help me oh the mighty overclockers :D .... Screenshots of bios settings would be highly appreciated ....

Using Cooler Master Hyper 212+ with it with dual fans .... I did some overclocking on my own today (saw some OC screeshots of bios of Z87 G45 by some people) ...... 4.3 GHZ @ 1.15 voltage (but CPU-Z and AIDA 64 both showing 1.224) ...... Did 2 hours testing of Aida-64 stability and maximum temp i reached was 69c on one core and 65c TJ .... I couldn't boot into windows on the same settings @ 4.4 ghz ..... here are the screenshots of my OC profile .....
still my aim is to get maximum safest OC with lowest possible voltage ...

Msi z87-g45 gaming, no display, no beep.

I am building a gaming computer. When i turn on my computer the cpu fan spins quickly then immediately slows down to a slow spinning state. My Boost audio light is on as well. But i get no display. I have tried the DVI HDMI and VGA outputs. I also accidentally pressed the cmos button while the compute was on. I also removed my mobo battery for 5 mins. Oh and on top of all that i dont have my standoffs. So maybe the board is short circuiting. But if that was the case my is my cpu fan remaining on as well as my boost audio light?
Here are my specs:
Ultra 550w ATX Power Supply
2 DDR3 in slots 2 and 4
Cpu with no bent pins (that i can tell)
Thanks for your help.

Im having exactly the same problem did you manage to get it working in the end?
The board has been tested by aria computing and came back fine they have also replaced the RAM and CPU incase they were the problem. Il list all the things Iv tried so far. Thing that gets me is there is no beep when I turn it on so something is wrong and im banging my head against the wall not being able to figure it out.
Checked both power connections many many times
Check for shorts
Changed power supply
Changed RAM (and tested in all configerations)
Tested 3 monitors on all ports (onboard DVI, VGA and HDMI)
Put 3 GPU's in it as well and tested all ports on them
Tested on a low end CPU
Tried out of case with just power leads and a monitor connected (no HD,USB,frount audio)
Reset COSMOS and checked the battery
Here are the specs
Intel Core i5-4670K 3.40GHz (Haswell) Socket LGA1150 Processor
MSI Z87-G45 GAMING Intel Z87 (Socket 1150)
16GB Mushkin Enhanced Silverline #997018 (2x8GB) 1333 (PC3-10666) 240-Pin DDR3 SDRAM CAS 9-9-9-24 1.5V
XFX Double D FX-785A-CDJ4 Radeon HD 7850 2GB 256-bit GDDR5 PCI Express Graphics Card
Antec TP-750w
WD 500GB sata green Hard drive
240GB Crucial M500 2.5" SATA 6GB/s (SATA-III) Solid State Drive
Please help if you have any ideas :(

Msi z87 g45 power cycling

I recently built a new pc in November and haven't had a problem with it until now. It doesn't post doesn't beep and won't boot as well. No display and it does this very thing with nothing plugged in at all (obviously the psu is plugged in).
My specs:
Msi z87 g45 gaming
I5-4670k (not over clocked yet)
Gtx 660
Corsair vengeance 2x4 gb ram
60 gb Kingston SSD
Evga supernova nex750b psu
The problem started yesterday when I had removed all of my components to route my psu cables.
After getting everything installed correctly I plugged it in and hit the power button and it came on for a second and turned back off I thought I had forgotten to plug the 8 pin cpu power in until it turned on a second later and immediately turn off. I quickly killed the power and had a look inside but nothing appeared to be wrong.
Now every time I turn it on it sits there turning on and off until I unplug it.
I've tried switching the ram the psu and reseating the cpu several times and nothing works.
I did manage to get it to stay on by shorting a jumper labeled "J1" but there's no display or anything other then the fans and LEDs being on.
Anyone know what could cause this? Everything is brand new and has only been running for a month and was running two days ago.

I have tried clearing CMOS by the button the battery and the jumper.
The only bios setting that I changed was to set my ram to run at 1600mhz which is what it's rated for (it was running at 1333 on the auto setting)
The thing that puzzles me is that J1 jumper that is right next to dim 1.
If I hold a screwdriver to it during the power cycling thing it stays on as long as it's being shorted but I don't get a display or anything everything is on and spinning but it doesn't boot. As soon as I take it off it reverts back to the cycle of on and off.
I've searched google for any possible incompatibilities or fixes but I couldn't find any.
Also something I forgot, I accidentally bent one of my usb 3.0 pins to the point where it touched another pin. Could this have caused my problem? If so rma wouldn't work cause I bent a pin. I'm totally fine with buying a new board but I'm not sure if it's the board or some other component.

MSI Z87-G45 + Razer Megalodon

Hi guys n gals of msi, before we get down to it, yes there are topics about this and ive searched trough them but cant find a definitive answer.
So here it goes, im using a MSI Z87-G45 with my lovely razer megalodons, and heres my issue, i can get sound, and my microphone to work, but not at the same time, if i lets say use skype, it will mute my microphone, letting me hear what my partner says, but if i use spotify, i cant then use the voice recorder to record my voice, but if i dont use neither, i can start recording my voice, but then i cant turn music on.
I dont know what has caused this, ive recently upgraded my motherboard, and did a fresh install, worked fine until i went trough and installed all of the latest drivers etc, and now i have this issue, dont know if i shall just kiss my razers goodbye and go back to my old siberia v2.
Anyone ever heard of this issue before, or how to solve it, googling or searching didnt give any answers at all, ask any questions and ill try to answer them asap
tyvm before hand / rob

All you can do is flash the bios to the latest version and update all the drivers to the latest.
>> BIOSes<<
Also update the firmware of the Razer equipment.
If nothing you need to contact MSI and Razer.
>>How to contact MSI.<<
I'll check for any newer releases.
Quote
I can only conclude the USB 2 implementation on this Motherboard is dodgy.
That is a quite an assumption, it would be one thing if it wouldn't work at all or would for instance cut in and out. Perhaps if devices other than Razer products had this many issues I would come to the same. I have used Razer gear on all kinds of equipment and usually have had some quirks. (I love Razer gear btw, BUT THEY CAN BE A PAIN IN THE BUTT) This sounds much more like a driver issue, is this windows 8?

MSI Z87-G45 and BSoD all time

Similar Messages

Maybe you are looking for