MSI Z87-G45 BIOS Temps

I am having an issue with the BIOS displaying 99 degrees Celsius in the BIOS menu. It ramps up rather quick loading into the BIOS from around 50 degrees to 99 which it stays at. Touching the heatsink itself it feels cool to the touch which leads me to believe its not displaying the temps right. Also in windows my idle temps are around 45-55 but under load they can go up to the high 90's.
I am using a MSI Z87-G45 board with a 4670k Haswell which I know run a lot hotter and seems to cap at 100 degrees with just the stock cooler... well until my new cooler ships.
If I were to guess I would say it seems the BIOS is putting some load on the CPU, which would be fine just seems odd. Any insight anyone had on this situation would be great as the little research I have done I have never seen anyone open up the BIOS to temps any higher then 55 degrees on YouTube.
Thanks guys

I just checked that literally after posting that thread. I was certain that it was seated well as I've been playing all types of games on it with no issues but thought I would reapply some paste... only to see that it didn't even make contact. Makes me remember why I'm not a huge fan of the stock Intel cooler hold downs. Now I'm bordering on embarrassed and amazed that the CPU didn't start frying or at least restarting.
Thanks for the help none the less.

Similar Messages

MSI Z87-G45 BIOS

So today I decided to check how my MSI Z87-G45 Gaming, Socket-1150 BIOS looked like so i pressed the enter BIOS option on the GO2BIOS utility app, my PC restarted and the screen stayed black for 10 minutes.... So I booted back to windows and disabled fast boot and tried to enter BIOS manually that didnt work either. So my problem is that my BIOS won't show at all. The PC is functional and there are no problems with it, can still boot into windows and go on about my day. But i would love to be able to enter BIOS.....

Oh great you found the solution Thanks for an update

MSI Z87-G45 bios code

Hello.
I would like to know what the following codes mean: 99, 9C and A2.
I get these on my down right corner when my computer boots up (where it displays the RAM and such). Basically it's code 99, then immediately changes to 9C, then A2, then my memory and details display, before windows starting.

I have the same problem since i have update to bios v1.60
Now i have flash a other bios version with MSIHQ USB Bootable Tool and the problem is gone.
Bios v1.60 troubles started when LiveUpdater5 flash it under windows 8.1
Which is the best Bios File (FULL) to use with MSI flashing tool into Dos mode ?????
Quote from: nielsicq on 03-January-14, 16:01:54
my g45 is stuck on A9 with ide devices.
without the ide devices its stuck on 99
i cleared the cmos.
i have this problem since updating to 1.6.
in the beginning it helped turning the pc on and off now it wont help annymore
sometimes when i hit delete it says entering setup but it wont.
please help

MSI Z87-G45 Bios won't update

Hi,
I am fairly new with DIY PC's and I tried updating my bios to the latest version today. Currently, it is in version 1.5, but the latest is 1.7. I downloaded Live Update 5, considering that it might be the safest way for a newbie to update his motherboard. So I downloaded the update from Live Update 5. I reach into the application and it says to close every program... Ok, done that. Now, when I click next it says in an error message: "Can't load drivers".
I am very confused at what "driver" I could be missing. When I installed windows and everything, I updated my gpu, ethernet and audio drivers. With Live Update 5, prior to updating my bios, I updated my audio and ethernet drivers again (newer versions). I don't really want to use a usb stick to update my bios because if it doesn't work under windows, the result could be even worse if done directly in the BIOS, I guess.
In summary, what could cause this error message "Can't load drivers" to pop up?
Thank you!

Get rid of Live Update from your pc. Use the forum's archive and flash method;
https://forum-en.msi.com/index.php?topic=169943.msg1289658#msg1289658
Install all drivers downloaded from an MSI Website and install them manually.
http://www.msi.com/product/mb/#/?sk=quicksearch-gaming

Overclocking Help .... MSI Z87 G45 with i5 4670k

Hi guys first of all i want to say MSI ROCKS!!!!!....
Purchased my first ever MSI motherboard and very satisfied from it ..... the looks are killer and now i want to see if its killer in OC as well ....
My specs are as follows:
MSI Z87 G45 (bios version 1.7)
Core i5 4670k
GSKILL Rip Jaws 8gb (4x2) 2133 mhz (but running at 1600)
Sapphire R9 290 TRI-X OC 4GB
Corsair GS800 800 watts psu....
Now my goal is to get safest OC around 4.2 - 4.4 ghz with minimal voltage and fully stable ..... its my first time with K series processor and there are just so many settings in the BIOS .... I know how to change the multiplier and CPU voltage and i tried doing 4.4 ghz @ 1.15 but it wasn't stable in AIDA64 stress test .... so help me oh the mighty overclockers :D .... Screenshots of bios settings would be highly appreciated ....

Using Cooler Master Hyper 212+ with it with dual fans .... I did some overclocking on my own today (saw some OC screeshots of bios of Z87 G45 by some people) ...... 4.3 GHZ @ 1.15 voltage (but CPU-Z and AIDA 64 both showing 1.224) ...... Did 2 hours testing of Aida-64 stability and maximum temp i reached was 69c on one core and 65c TJ .... I couldn't boot into windows on the same settings @ 4.4 ghz ..... here are the screenshots of my OC profile .....
still my aim is to get maximum safest OC with lowest possible voltage ...

MSI Z87-G45 Latest beta bios problem?

So i have updated to the latest beta bios but the core jumps to 5600mhz from 4500mhz.
Everything is set like it's alway's set.(4500 core @ 1.285v 4200 uncore/ring @ 1.19v, memory on xmp profile and the inputvoltage is 1.880v)
This only happens when using firefox from what i've seen, but i haven't done testing yet so it could happen with more programs.
Firefox becomes laggy when this happens and doesn't want to load anything unless you wait 25 seconds and then it still not load's the site complete.
IE 11 doesn't do this by the way.
My setup:
MSI Z87-G45 Gaming
Intel I7 4770K
G.Skill Ripjaws X 16gb
Sapphire R9 290
Cooler Master Silent Pro 1000W
Edit: The clock's are just showing up that high in task manager, in XTU they stay @ 4.5.
But i still don't know why firefox is acting up with this bios.

Close this topic as i have found the problem.
It was a usb 2.0 stick in usb 3.0 port that was saving the cache for firefox.
But the stick was working very slowly in that port hence the slowdown.
Sorry for the thread.

MSI Z87 G45 GAMING erratic BSOD/freeze @ 2300, stable @1600. Can't solve.

Hi All,
I would welcome some advice. I am about 4 months into a new machine build:
* MSI Z87 G45 GAMING motherboard
* i7-4770K Haswell 3.5 GHz & aftermarket heatpipe cooler
* 4 x 4Gb G.Skill SNIPER DDR3-2133 PC3-1700 (F3-17000CL11D-8GBSR)
* GeForce GTX 650 Ti w/ 2 Gb Video RAM
* Samsung 840 Pro 256 Gb SSD
* Thermaltake 700W Toughpower
* Win 7 Pro 64-bit SP1
The system seems to run fine at the default 1600 MHz RAM speed, however if I implement either of the X.M.P. profiles (which kick the memory speed up to the RAM's advertised speed of 2133 MHz), the system will occasionally (every 8 to 48 hours) freeze or BSOD. The BSOD stop codes are inconsistent in number (0x00, 0x41, 0x1E, 0xC4) and driver. When the system freezes, there is no consistent behavior. I am not doing any other overclocking besides using the X.M.P. profile in the memory.
RAM timing on the 2133 X.M.P. profile is: 11-11-11-30.
I have updated the BIOS to 1.5, including the ME, and updated all drivers in the system. All irrelevant hardware and drivers are disabled. Also I have done the following:
* MemTest+ 5.01 for over 30 hours, all 4 sticks in. No errors.
* Intel BurnTest on 'Very High', 10 passes, no errors
* Prime95 for over day with 90 C CPU temps constantly being hit. No errors.
* Unigine Valley Benchmark for 30 minutes; no issues
I increased V_DRAM from 1.60V (from the XMP profile) to 1.65V, and I also added +0.10V offset to increase the CPU I/O ANALOG , CPU I/O DIGITAL and SYSTEM AGENT voltages. Didn't seem to help. All other CPU voltages are default from [auto].
I rolled the memory speed back to the default 1600 MHz, and the system seems stable as a rock.
I don't really need to have the memory run at 2133 MHz, but it irks me that the system is not stable with the rated components, and I'm befuddled why the stress tests seem to pass just fine, then the system will randomly hang with arguably a far less demanding load than the stress tests.
Note that I have not yet:
* reset the CMOS when changing to X.M.P. Perhaps I should?
* reseated the graphics card or CPU. The latter will require R/R of the thermal grease, which I will do if needed, but it's a pain. Since the system is stable at 1600 MHz, I assumed that all basic systems are working as they should.
* Tried to work my way up in memory speed step by stem from 1600 to 2133 to see where things fall apart.
* Tested the video memory
I suspect main system memory, despite the clean bill of health from MemTest, and based on many of the comments to others with similar problems from the veterans on this board. I don't want to push the CPU voltages too much above the default/auto values, for fear of damage and reduced lifetime.
Also, the power supply is a nice unit from an older high-end gaming rig. It is rated at 700W. The PS does probably have over 30,000 hours on it (24/7 use for 3-4 years), however. Strange that it would work at 1600 MHz fine, and with only slightly more power load at 2133. I suppose stranger things have happened.
I've read the suggestions to run only 2 sticks, rather than 4, but I can't justify dropping $140 on new memory (I don't really need the extra speed benefit, it's more curiosity and just not knowing at this point).
Anyway, perhaps more seasoned souls than I can share their thoughts. The system is perfectly usable at 1600, but I'd really like to know where the lockups are stemming from. Troubleshooting is maddening because of the inconsistency in the long times before failure and lack of repeatability to reproduce the issue.
Thanks in advance for your time.
-Paul

Thank you both for the prompt replies. I'm learning a lot.
Turns out I also found this from G.SKILL in going over reviews of the memory modules I have. Another user had a similar configuration as mine and was having similar problems. G.SKILL replied:
Quote
We are sorry to hear you were unable to get two kits working in the same system. It is not guaranteed two kits can operate at the rated specifications since they were not pre-matched, tested, and guaranteed at factory. With multi-channel motherboards, perfectly matching memory is necessary to achieve high frequency. This is why we must offer high capacity 32GB, 64GB kits, otherwise we can just sell one module at a time and have you purchase as many as you need. Unfortunately, memory does not work that way. If you purchase a 16GB kit rated at DDR3-2133, you should have absolutely no issues. For any further questions or concerns, please feel free to contact us directly for assistance.
Thank you
GSKILL SUPPORT
Not knowing any better, I simply purchased two "kits" of 2x4 GB each and installed them. Perhaps worse, if the modules were matched, I may well have mixed them up so the matched modules don't even sit in the same channels 1/3 or 2/4. G.SKILL seems to have a pretty responsive board, so I'll ask them what they suggest.
Also in the end, I really just want a stable machine. This is a basically an office/engineering machine. My initial thinking was that if the system was unstable at 2133 then there is something wrong with it that needs to be fixed. It sounds instead like getting to 2133 is not guaranteed, and is much more of an art than simply throwing the modules in and powering up the system.
I'm perfectly happy at 1600 knowing the system is stable. Indeed realizing now that 2133 requires overclocking, I may well have backed off to 1600 even if everything had worked just fine at 2300, just to trade extra stability for the (small) performance improvement that I would likely never notice anyway.
I'll put together a post for the G.SKILL forums, and if I get anything useful I'll post what I learn here for completeness.
Thanks again for the fast and informative replies. It's much appreciated.
Best,
-Paul

MSI Z87-G45 Gaming, sound from USB mouse?

Hi!
I have some issue from my new computer, see spec below.
For the information I have a MSI Z87-G45 motherboard.
I have some sound that occurs sometimes (specially during the first 2-5 minutes) when i move the mouse around.
It occurs as well sometimes when I been using the computer for a while, basically random just more frequently at the start-up.
It's hard to know from where the sound occurs, could be PSU but today I read something on another forum about the motherboard I'm using:
- Higher sound quality using USB, thanks to special adapted current power.
So i wounder if this can be the case? Is that the reason why i get this noise from inside the computer?
Is there some way to disabled this "feature" in BIOS?
Greetings
|Asus 24" LED VG248QE 144HZ (2st) | EVGA GeForce GTX 780 3GB PhysX CUDA | Intel Core i5-4670K | MSI Z87-G45 Gaming, Socket-1150 | Corsair SSD Force Series GS 240GB 2.5" | Fractal Design Define R4 Black Pearl | Crucial DDR3 BallistiX Tactical 16GB | Corsair TX 850W PSU | Noctua NH-U14S CPU Kylare | CM Storm QuickFire TK Keyboard Brown | Ace Laser Gaming Mouse EDGE 3200 | QPAD XXXL |

The sound sounds like the old mechanics hdd kinda.
It comes inside the computer, not the speakers.
My feelings is that it can be the PSU as well, just wanted to check this first, since it most often comes when i move my mouse.

MSI Z87-G45 problems

I'm having issues (again) with the MSI Z87-G45 motherboard. This is a replacement board from having to RMA my initial purchase. Brand new build and I cannot get any display. I have reseated the cpu, ram, and graphics card multiple times. I disconnected everything from the motherboard except for the essential items and I still do not get a display. I tried without a graphics card and was still unable to get a display. When using DVI the monitor goes into standby mode. When using VGA the monitor doesn't recognize it's hooked up to anything. I use this monitor on multiple computers in my house so 10000% sure it is not the monitor. All components are out of the case.
Components I have tested:
cpu: Intel Pentium G3258, Intel Celeron G3220
Motherboard: MSI Z87-G45
gpu: MSI R9 280, MSI R7 260, no gpu
psu: EVGA 750w 80+ Bronze, Corsair CX430w 80+ Bronze
ram: Pny XL9 1600 DDR3 8gb stick, Kingston Fury 1866 DDR3 8gb stick
Is there something I'm missing or is this as simple as I received another bad board?

So...
Quote
ram: Pny XL9 1600 DDR3 8gb stick, Kingston Fury 1866 DDR3 8gb stick
Are you mixing RAM??
Did you try to reser CMOS? >>Clear CMOS Guide<<
When I was very beginner, I had a computer with GPU, and I had similar problem: no display. Well, I was smart enough to plug my HDMI to on board HDMI port even though there was a GPU. So please make sure that you plug the cable to the graphics card.
Can you try different video cable? DVI/VGA/HDMI.
Intel Pentium G3258 will NOT work as your board BIOS is probably earlier than required for this chip to run properly.

MSI Z87 G45

hi, just recently i've bought this board, my USB keyboard not working on the POST there, but in the windows its okay. i tot it would be the bios usb legacy enable/disable. i use the other keyboard and went to enable the usb legacy, but still the previous usb keyboard still not working by the POST time. i just dont want to switch to other keyboard when i wanted to go to the bios.
Any idea what's happening?

"lifting this topic up" !!
First of all my specs;
Intel Core i7-4770K 3.5GHz
MSI Z87-G45 Gaming, Socket-1150
MSI GeForce GTX 760 Gaming 2GB
2x Corsair Vengeance DDR3 1600MHz 4GB CL9
1000w PSU
sata 3 500gb HDD
I recently bought 2 of theese MB:s, one for my computer and also i build a computer for my GF..
im struggling ALOT with my keyboard sometimes not working neither from startup or in windows..
i have been updating BIOS to the latest, and while doin that i noticed in the info that there was some USB issues that had been "corrected".
Well apperently this issue i have is a pain and it wont give in.. i have been tryin 3 other keyboards and at the point its not working, no keyboard is working, EXCEPT, for the one i use for GF computer, wich is a wireless Logitech k850 something keyboard, That one works like a charm, but none of my wired ones..
Strange thing tho, is when it is working, i tapped into BIOS to check if there was some USB setting to change or smth, but nothing.. tho i noticed it said i had 2 keyboards installed o.O, 2 ?! no i only have 1..
Why does it say 2?
One more thing just, while keyboard aint working, my Bluetooth stick works, USB memory works, Mouse works, and External usb3 disc works..
Yet it says this in the USB setting that i have 7 of 8 unused ports, and 1 port with unknown device..
anyone know the solution to this? :3
Please write a line or two so i can fix this!
Best regards // Emil
PS; sorry for bad english, im from sweden.

MSI Z87-G45 and BSoD all time

Hi,
my configuration:
MSI Z87-G45,
i5 4670k
2x8 GB ddr3 Patriot Viper 3 1600MHz CL9
Radeon HD 6870
PSU Corsair 550W
HDD SATA WD 500GB
SSD Corsair Force 3 128 GB
Windows 7 64bit
...and i have BSOD all time... At first I thought that the problem is SSD, but yesterday unplugget him and put normal HDD. And still got bluescreens. I updated BIOS to version 1.4, restored default settings and I tried to manually set the memory and enable/disable XMP profile. Memtest86 passed without problems. I changed SATA ports and dunno what more to do. Help please.

Quote
no BSOD so far, so this mean that first ram piece is bad?
Have that RAM kit exchanged. Perhaps even consider a Corsair Vengeance or Vengeance Pro. http://www.corsair.com/us/memory-by-product-family/vengeance-pro-series-memory/vengeance-pro-series-16gb-2-x-8gb-ddr3-dram-1600mhz-c9-memory-kit-cmy16gx3m2a1600c9.html
Quote
IRQL_NOT_LES_OR_EQUAL 0x0000000A
This Stop error message usually occurs during installation when there was an attempt in kernel mode to touch pageable memory at too high a process internal request level (IRQL).
Ouch, I just rechecked your screenshot. That XMP profile calls for a CR of 3T. Your setting is 1T. That is one probable cause as per the error explanation above.
I would consider an alternative kit as 3T essentially points to a lesser quality memory chip on those modules. You can of course attempt to manually set your CR to 2T or 3T and see if it works for you.

MOVED: ram compatability msi z87 g45

This topic has been moved to Intel Core-iX boards.
https://forum-en.msi.com/index.php?topic=171226.0

I also have a MSI Z87 G45 motherboard.
I tried 1 working RAM module in all 4 sockets while testing and my memory only works in the 2 sockets closest to the CPU. I get no display when putting RAM in the other sockets.
I have 4x4GB DDR3-2400 modules, Kingston HyperX Anniversary (KHX24C11X3K4/16X).
I also tried the flash the BIOS to the latest but no improvements.
I got older Kingston HyperX (DDR3-1866) that do work in the other sockets.
Do I need to configure my BIOS first before inserting the RAM in those sockets?

Default MSI Z87-G45 Lan/Usb Help needed.

Hello,
So yesterday i massively upgraded my pc with the following components:
MSI Z87-G45
Intel Core i5-4670K
GeForce GTX 780 3GB (Classified)
and kept my old Ram (Gskill ripjaw ddr3 3x4gb) ,Hd's PSU. and i am using windows 8.1
The main problems i am having are as follows:
1. I am unable to get the usb ports to recognize most things i plug in. This included a USB flash drive and a wireless network stick.
2. I am unable to install any Lan items from the mobo factory disc. The option to install the LAN drivers are greyed out on the disc menu, and when i search for them they will not install. Now i've found them online and downloaded them to a Usb Drive, but i can't use that because the USB drive won't be recognized by windows.
Any help on these issues would be so greatly appreciated, i am getting terribly frustrated and don't know what to do.
I have checked the Bios and it appears to be current, i have also reset the Mobo battery at the request of MSI.

have you done a new fresh OS installation after mainboard change?

MSI Z87-G45 Gaming not entering setup or boot menu

Please someone help, I am getting no setup or boot menu, case & CPU fans come on, drives come on, led's come on, but blank screen.
I took out the graphic card & ram sticks, pulled the plug for leds & case fans, took all cables off HDD's, now only cpu & one stick of ram in dimm 2 connected + power switch.
plugged vga cable direct in MB, blank screen, then plugged cable in MB HDMI, blank screen.
tested monitor, ram & power supply in my sons computer which is a x58 LGA1366, all worked well.
I have no means of testing motherboard or cpu.
specs:
MB: MSI Z87-G45 Gaming
CPU: i5-4670k
RAM: Crucial Ballistix Tactical 1866MHz 9-9-9-27 1.5v
PSU: Corsair CS650M
I also tried another PSU a Thermaltake AP850W
P.S.
I have reset all i.e. pulled plug, taken battery out, pressed reset & shorted the two reset pins next to battery.

newer board are different they need at least a CPU to even show a code as they use that to activate the BIOS and if they do not have that it will FAIL to post anything as the board is used as a backbone as nearly all the important stuff is on the CPU itself (Processor, IMC, SATA controller, Network Controller, VRM (on Haswell), GPU and many other things) so it will fail to post as before it was only a processor but now there more of a system on chip really and has most of the important stuff that used to be on the Board itself so without that the Motherboard is just an electrical plane with impressively limited connections as all the good stuff is now on the Processor that you do not have!
There is not much that you can tell till you at least get that CPU as the board has nothing to work with as there is nothing to process the signals from the BIOS so its just a useless item so shows nothing.

Msi z87 g45 gaming supports supercharger

I wanted to know if my msi z87 g45 supports supercharger features

So;
It won't let you charge phone/tablet (any USB device) when the PC is off as this board does NOT have red USB 2.0 header like this one:
Quote
http://64.183.18.101/faq/images/sc.jpg
Though with appropriate settings within BIOS you will be able to do this while PC is in sleep mode or simply running (super charger would increase voltage output of USB2.0 header)

MSI Z87-G45 BIOS Temps

Similar Messages

Maybe you are looking for