MSI Z87GD65 motherboard Not supporting Latest GPU CARDS FROM AMD

Hello team , This is a serious issue Horrible story
m' having  MSI Z87GD65 motherboard  & MSI z68A GD80 b3
Since the old motherboard is not supporting my latest R9 290 card I purchased latest rig I7 4770k and added MSI Z87GD65
Both are not displaying anything .. I replaced the r9 290 with service point 3 times and I changed 2 different brands .. all having same issues
I updated the latest motherboard too with latest bios but yet no luck .. I finally came to know I became fool again on choosing MSI board
m' sure the card it working .. why msi is not supporting latest cards ?? why msi is doing to the customers ?? I wasted a lot of money really
Some one reply soon I BEG YOU !!

What old card is working on your board and what PSU do you have installed?
>>Posting Guide<<
What Bios version do you have installed?

Similar Messages

  • Is MSI P965 Neo-F supports DirextX10 video cards...

    Is MSI P965 Neo-F supports DirextX10 video cards?
    what are the video cards supported in this board?
    Thanks in advance for your reply...

    "Any AGP card works in any AGP slot."
    not exactly.. there is an exception with too old AGP slot which use 3.3V and too old AGP VGAs respective.
    @hackfinn
    can you complete rest of your PC specification, e.g. CPU, PSU and so on.. and what VGA you are planning to get?

  • Camcorder video error: "Unable to record. Resolution not supported by memory card."

    We purchased two Samsung Droid Charges the first day they were released and recently they've both been getting this error after 8-15 seconds of recording in HD (1280x720): "Warning: Unable to record. Resolution not supported by memory card."
    Called Verizon tech support, but they referred me to Samsung. Not knowing much about micro SDHC cards, I was alarmed to discover that the factory pre-installed 32gb card is only rated class 2 for speed. Samsung told me you need a minimum of speed class 4 or higher to record at this resolution. The only problem is you need an SD card installed in order to use the camcorder, period. In other words, all of us who payed an arm and a leg for the best phone Verizon sells now have to go buy our own micro sd card that actually supports all of the phone features as advertised?! The lowest prices I've seen for the faster cards are $70. Are we the only two Charge owners experiencing this problem?  I've read somewhere that lower speed class cards may initially support faster speeds than they are rated until they accumulate more files, so the problem may go undetected for some time until you have more files that are stored in different locations on the card (making them difficult to access at the faster speeds). This may explain why are the first ones to get this error since we've had the phones the longest and only 50% free space remaining on the SD card. Oh, Samsung also said they won't be able to replace your card for one that has the proper speed rating. Kind of seems like false advertising to say a feature is available (HD camcorder), and then not mention the fact that the memory card provided isn't sufficient for that feature (separate upgrade required). Anyone else sharing the same frustrations? Ideas?

    Thanks for the response. I've tried everything on that page. It's not an issue with the cable, or firewire port or the cable being connected properly, as the iSight camera works fine with iChat. I've disconnected the only other firewire device on the computer, didn't make any difference. Camera works fine in iChat, so it's not the camera itself. And, as I mentioned in the post, the same camera, if hooked up to my laptop, works just fine recording in QuickTime. So, it appears to be an issue with the QuickTime installation on this computer. I've done a search for the same error I'm getting and found some other occurrences with the same problems, but none that offered a solution.

  • CSM-S "Configuration Sync is not supported by this card"

    This is the message everytime I try to sync the cards.
    NETCSP01#hw-module contentSwitchingModule 5 standby config-sync
    Configuration Sync is not supported by this card
    NETCSP01#
    The are both installed into the same 6513.
    Here are the configs
    module ContentSwitchingModule 4
    ft group 1 vlan 400
    priority 30 alt 20
    vlan 200 client
    description Client Facing CSM Interface
    ip address 192.168.100.6 255.255.254.0 alt 192.168.100.7 255.255.254.0
    alias 192.168.100.8 255.255.254.0
    vlan 100 server
    description Server Facing CSM Interface
    ip address 172.18.10.6 255.255.254.0 alt 172.18.10.7 255.255.254.0
    alias 172.18.10.8 255.255.254.0
    module ContentSwitchingModule 5
    ft group 1 vlan 400
    priority 20 alt 30
    I am running the following version
    Cisco Internetwork Operating System Software
    IOS (tm) s72033_rp Software (s72033_rp-IPSERVICESK9_WAN-M), Version 12.2(18)SXE4, RELEASE SOFTWARE (fc2)
    What am I missing?
    Thank you!!

    The configuration synch feature is supported from CSM-S version 2.1.1. I suggest you upgrade your device for using that feature.

  • MOVED: MSI live update not supported on Win XP 64

    This topic has been moved to Operating Systems.
    MSI live update not supported on Win XP 64

    Yes you are right.  The system drive will always be Drive C, but I am not sure if D will be my storage drive or the other sytem drive.  I could always try and find out but just havn't.
    In the past, I had lots of virtual drives (partitions), and HDD's (as many as 10 total IDE devices).  But when the larger drives became more affordable, I prefer running with just 2, the system and storage for the sake of simplicity.  Since I do beta testing, I have having to reformat and reinstall a lot, so this system has worked great for me.

  • I am a NRI who is staying in UAE. My Apple ID is configured with Indian store. I don't have a credit card in India but having it in UAE. Apple store is not accepting my Debit card from India. What is the legal way to purchase or add credits with itunes?

    I am a NRI who is staying in UAE. My Apple ID is configured with Indian store. I don't have a credit card in India but having it in UAE. Apple store is not accepting my Debit card from India. What is the legal way to purchase or add credits with itunes?

    It won't matter. You are not allowed to use the Indian iTunes Store from the UAE or anywhere else outside of India.
    The Service is available to you only in India. You agree not to use or attempt to use the Service from outside this location. iTunes may use technologies to verify your compliance.
    Since you are in the UAE, you can only use the UAE iTunes Store. You will need either to open up a new account in the UAE iTunes Store, or change the country of your existing account to the UAE.
    Regards.

  • LDAP synch not supported during OIM upgrade from 9.x to 11g

    Hi Experts,
    Following line is mentioned in OIM upgrade guide for 9.x to 11g (http://docs.oracle.com/cd/E21764_01/upgrade.1111/e10129/upgrade_oim.htm)
    “LDAP Sync is not supported when you upgrade from Oracle Identity Management 9.1 to Oracle Identity Management 11g”
    Please help me in understanding the above line.
    I have a pretty simple setup of OIM (version 9.1.0.2) with AD and Exchange connected. I guess I don't have any impact of above line.
    LDAP synch is required when we integrate oracle identity manager with oracle access manager.
    Please suggest.
    Thanks
    M S

    Yes LDAP Sync has most of the features when you have OIM and OAM integrated with each other. You can go ahead with upgrade if LDAP Sync is not part of your requirement.

  • Error:  Current provider does not support returning multiple recordsets from a single execution

    Hello,
    The following piece of code which has been working for the
    past five years suddenly started giving me the following error:
    Current provider does not support returning multiple recordsets
    from a single execution
    We have recenlty moved this site to a new server. Could this
    error be related to their CFAdmin settings? Eveything else on the
    site seems to be working fine. Or am I using an outdated tag or
    something?
    Any light in this direction is appreciated, thanks.
    Here's the code:

    There doesn't seem to be anything that seems wrong with the
    code. It might have something to do with the Max Pooled Statements
    or Number of Connections settings in the CF Administrator, but it
    could just as easily have something to do with a setting on the
    database. I would check with your provider.

  • Elements 11 states that it does not support the camera raw from my new Nikon D600 and that I should

    Elements 11 states that it does not support the camera raw from my new Nikon D600 and that I should go to "the Camera Raw help documentation." When I click on the help menu I get a message from my browser stating that it is a dangerous website. Now what

    Unfortunately it was clicking on Updates that brought the “dangerous website” pop-up, but several hours later I tried again for the umpteenth time, and it worked! I am so glad because I am working on a project with a deadline.
    Thanks for replying. Maybe if someone else has this problem they could be told to wait a few hours and try again.
    The main option on the ‘dangerous’ pop-up is a “Get me out of here!” button, which I always clicked. There are options to go to the website anyway, but I am too leery of the web to do that. Now that I know it’s possible to reach the update center without risk I will never consider it.
    Thanks again,
    Lynn

  • MSI KT4V Motherboard not recognizing my FX5200

    I just started building an old computer for a friend. Im taking parts from two older computers and putting them into one. Im taking my friends processor, hard drive, dvd drive, floppy, and ram. Im putting that into my old PC case with my old geforce fx 5200, my old MSI KT4v Ms-6712 ver:1 AGP 8x motherboard. I used to use that old case with that motherboard and video card and it worked fine. Now all the sudden, possible from moving the motherboard from different PCs and such, when i put everything into the case it all seemed to work fine. Except that I'm not even getting a signal from my video card. I have a 350watt power supply that i know is sufficient enough, but my monitor isn't getting a signal from the video card. I tried using an old geforce 2 from a friends PC to test it and it doesn't work in that PC either, so i've ruled out it being a problem with the video card, because my fx5200 works fine in my other friends PC.  ??? I'm wondering if their is a problem with my motherboards AGP slot not being able to detect my FX 5200. I know that moving a different processor to a new motherboard requires the reinstallation of windows, but i should be getting something on the monitor.  Any suggestions or helpful information would be nice. I've searched the internet and google for quite some time and i havn't found any helpful information about possible broken AGP slots or the motherboard not even getting a signal through the AGP card. Help would be nice-  If i left out any important information please let me know, thanks
    ¤Yan the Samurai Smartie¤

    Well, heres what i tried to do. I tried clearing the cmos. Going by these instructions
    1-touch PSU to clear static
    2-remove the motherboard battery
    3-switch Jbat1 jumper from 1-2 to 2-3
    4- wait atleast 10 minutes
    5-switch jumper back
    6-reinsert the battery
    7-boot up etc.
    I did all that but still no luck. The screen was still blank when i booted it up. I didn't unplug everything before resetting CMOS(by that i mean the harddrive, floppy, and DVD, but i did unplug it from wall and everything), because it didn't say to in a MSI support page. I did try to boot up with the barebones setup though after resetting cmos but still no luck. Just the CPU/heatsink, motherboard, one stick of ram, and video card. Still nothing happening on the screen. I do have an extra power supply and im going to try putting that in next. The one that is currently in there was used in my friends PC and was working fine. Ill give my larger power supply a try though. Ill post back later about if the power supply did anythiing or not. Thanks
    p.s.-Before you mentioned the standoffs and im going to look under the motherboard as well to see if their are too many or too little. The testing continues....

  • Why mac pro 2013 not supporting illustrator GPU rendering

    Here, all nvidia cards supporting this:
    http://helpx.adobe.com/illustrator/kb/gpu-performance-preview-improvements.html
    now I'm thinking, that buying the new mac pro 2013 maybe wasn't the best idea... Apple put in AMD GPu's, that is fine by me, but come on, give us some more support for them! Normal windows PC (for 800€) with nvidia GPU is faster at rendering in Illustrator, than my workstation mac (3500+€)! Really? O.o
    And story doesn't end here. I was reading one article about GPU usage in this new mac pro and then I tested it myself. Only one GPU is used and the other is barely touched! And this goes for Maya, photoshop, illustrator and other adobe programs. I was shocked, that I discovered I have one GPU to warm up my room and only one actually doing all the work.
    Ok I understand, that also software developers needs to support stuff and write their software to actually use GPU's, but adobe creative suite is one of examples, where software is actually capable of using GPU via openCL and in some cases even CUDA from nvidia.
    And there is one more thing: new mac pro, has 2 identical AMD GPU's inside, which can work in crossfire configuration under windows in bootcamp, but not in OS X. Sometimes I even play some games on my mac and sometimes I'm testing them (I'm artist, but I also like to develop and test some games in my free time) and it's kinda a shame, that I can run games with better performance under windows in bootcamp.
    When I bought this computer I thought this is going to rock and sweep up with all my previous machines. Well in practice it is much of unused potential and great room warmer. It's kinda sad, that on my girlfriend's PC I can play games with better frames and details on GF 660GTX than on my mac pro... I know I know, mac's aren't for gaming, but hey, sometimes it is good to get my mind on rest and blow up some enemies!
    I'm not saying mac pro isn't great product, which is (very great). But support to use all computer capabilities is very limited and Apple should kick developers in their back side and push them to start developing things to use GPU's more.
    I'm also not expecting Apple to jump on their feet and fix problems overnight. No, just start thinking of adding more support and things that would make our computers much more used and not only good decoration on desk. First would be a good steep adding crossfire support to OS X. That might even help at rendering some 3D scenes?
    Next step would probably be better cooperation with software developers, like Adobe , Autodesk,... If adobe made good support for GPU rendering in Illustrator, aim that we get that support soon as well. I'm sometimes having a lot of paths and objects and rendering goes pretty slow then.
    I'm also thinking about that AMD choice Apple made wasn't so good when you see that Nvidia puts much more effort into supporting more and more stuff, while AMD is sitting idle not even updating their drivers anymore.
    Oh and one more thing: Can we please, please, please, please, preeeeeetty please get 10-bit output support on OS X? It's kinda sad, having good mac workstation with 10-bit capable monitor (dell UP2414Q) and no support for it, while other PC workstations all support it... Photoshop is working much better on OS X and here I have much better integration and everything and I really love working in Photoshop running on OS X, but some basic things are missing and I'm really asking myself sometimes: was that good decision? Photoshop was first written for macs and in 2014 there is much better support for adobe software on windows than on OS X. Where went wrong?
    Don't take me wrong and think I'm just ranting here without any good reason, but think: buying very expensive computer that is supposed to make creative work easy and painless is actually just on paper. In reality computer potential is pretty much unused and that makes me thinking if I would be much better buying iMac instead of mac pro...
    TL;DR: I wish for some more support from Apple for their new expensive mac pro's 2013. They are great piece of equipment, but equivalent PC's running windows are surpassing them in this department, specially when GPU's are involved. Now I would like to point this out to Apple, so I don't know where to write so they will read so I first wrote that here. I hope someone from Apple reads this and give us some feedback on those missing things or maybe I get direction where to write to Apple so I get maybe some response from them(?):
    -not enough GPU support for creative software (adobe suite, autodesk,...) - nvidia + windows offering much more for less money?
    -no crossfire support on OS X. Any particular reason for that?
    -no 10-bit support for 10-bit displays. Why not? Hardware is capable, why software isn't?
    -lack of openCL software out there. Apple isn't doing much to get more support or developers just too lazy to put more effort into this? GPGPU isn't the future as some companies are trying to convince us?

    Grant Bennet-Alder wrote:
    All displays are supported by one GPU -- the display GPU. The second GPU is reserved for un-interrupted GPU computing and has no Display output Hardware.
    Anandtech has a discussion of this in his review of the late 2013 Mac Pro.
    Under OS X the situation is a bit more complicated. There is no system-wide CrossFire X equivalent that will automatically split up rendering tasks across both GPUs.
    By default, one GPU is setup for display duties while the other is used exclusively for GPU compute workloads. GPUs are notoriously bad at context switching, which can severely limit compute performance if the GPU also has to deal with the rendering workloads associated with display in a modern OS. NVIDIA sought to address a similar problem with their Maximus technology, combining Quadro and Tesla cards into a single system for display and compute.
    from section 9:
    http://www.anandtech.com/show/7603/mac-pro-review-late-2013/9
    Another problem here: on windows bootcamp crossfire IS working, but not in OS X. As I wrote, sometimes it would be better to get more rendering power than computing power (actually at current state of GPU computing software, computing GPU isn't working very much if at all). It would be nice to have an option to switch on and off crossfire so we could use more rendering power when needed.
    Also not all people are doing video rendering on their computers. What about 3D modelling and 2D work in photosohp? And maybe people like me are occasionally wish to play some games on their mac?
    You linked me GPU usage from one program (probably adobe after effects or premiere pro or apple final cut X?), that is probably one of the only pieces of software that actually uses both GPU's under OS X. I made same experiment with software I use and I even tested some software I don't use but it is advertised it is "optimized" for mac pro like pixelmator.
    And guess what? Second GPU is 99% time idle. Even when some stuff is using openCL in Photoshop, stuff is still computed on rendering GPU and not on computing one, which makes computing GPU just a good room warmer as I wrote before. Wouldn't be better to at least use second GPU for something than heating air?

  • Quadro2000 does not support ie9 GPU hardware acceleration.

    Hi
    I’ve tried many time but my w520‘GPU (quardro2000) seemed does not support Internet Explorer 9 GPU hardware acceleration.
    The test website is here.
    http://ie.microsoft.com/testdrive/Performance/PsychedelicBrowsing/Default.html
    Did anybody know how to solve the problem?
    Thanks in advance.

    dxh8497 wrote:
    Yes, I sure that I set BIOS Display as Discrete.
    And chrome Firefox supported GPU hardware acceleration, but ie9 didn't.
    Well first of all, all three support GPU acceleration on the W520 with the 2000M.  So something else is causing problems. I would suggest reviewing the latest BIOS and video driver versions on support.lenovo.com against your machine and updating where needed.
    After that, I would run your BIOS with default settings then retest.  That will be Optimus mode.  I would then change the BIOS Dispplay setting to Discrete with OS auto detect disabled and retest.

  • Facebook does not support latest upgrade to Firefox. Can access Facebook throuogh IE* (ugh!) but not Firefox

    Since upgrading to the l;atest firefox am unable to access facebook. they say they do not support your latest plugin. WHEN are you going to fix so I don't have to use IE8?

    There is nothing to fix in Firefox, if a plugin is not working you need to contact the makers of the plugin.

  • IMac PC does not support latest Adobe FP/can't watch Youtube/Only solution=new computer??

    I can no longer watch You Tube because the latest version of Adobe Flash Player
    will not download to a PPC. I run Tiger 10.4.11 (I know that's ancient but it works
    very well!) Does this mean the only way to view You Tube would be to buy a new
    computer? Everything runs perfectly except You Tube. I've never been a big fan of the site
    I still would like to have access to it but buying a new computer to get one site seems
    like a bridge too far. I have Adobe flash Player and but not the latest version.
    This problem only happened recently which seems strange. I even have a
    couple of videos on the site and have access to my account. I can get the site and my account but
    first the sound stopped playing a month or two ago but the videos still played. Now the videos
    don't play at all. From what I've heard, only a computer with Intel can accept the latest version of
    Adobe. Any thoughts or tips??

    It will work on a PPC Mac running Leopard, but not Tiger:
    I am in the same boat. I run a G5 PPC iMac and I cannot watch flash videos on the BBC website or on BBC iPlayer, and it struggles on YouTube.
    For reasons that passeth all understanding, they all work with the PPC version of Firefox, called TenFourFoxG5.app, once you have enabled plug-ins, as it does not natively support Flash.
    You can download TenFourFoxG5 from here:
    http://www.floodgap.com/software/tenfourfox/
    Now for the interesting bit: TenFourFox, like Firefox, does not support most plug-ins. Unless you are prone to headaches (in which case don't) you can read about that here:
    http://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
    But there is a workaround!
    Open TenFourFox and type in the address bar: about:config (no spaces) and click return. This gives you a warning that it might harm the application. Ignore that and click on 'I'll be careful, I promise' and you get the config file that you can edit - with great care.
    Look/search (scroll down) for: tenfourfox.plugins.enabled
    Set it to true. (Double click it to toggle it)
    Now close TenFourFox, open it again, and Flash will now work, as it now uses the plug-ins that Safari has stored.
    I am using Flash 11.5.502.55 in TenFourFox and it works just fine. Here is how to get a working version of Flash Player:
    You can check here:  http://www.adobe.com/products/flash/about/  to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*.
    * Unhelpfully, if you want the last version for PPC (G4 or G5) Macs, you need to go here:  http://kb2.adobe.com/cps/142/tn_14266.html  and scroll down to 'Archived Versions/Older Archives'. Flash Player 10.1.102.64 is the one you download. More information here:  http://kb2.adobe.com/cps/838/cpsid_83808.html
    You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
    http://kb2.adobe.com/cps/909/cpsid_90906.html
    and also that you follow the instructions closely, such as closing ALL applications (including Safari) first before installing. You must also carry out a permission repair after installing anything from Adobe.
    After installing, reboot your Mac and relaunch Safari, then in Safari Preferences/Security enable ‘Allow Plugins’.
    (If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, try the following solution which fools the site into thinking that you are running the version 11.5.502.55:)
    Download this http://scriptogr.am/nordkril/post/adobe-flash-11.5-for-powerpc to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.

  • MSI MEGA 865 not support Prescott 3.2 & higher

    i have 3.2e Prescott but has vcore problem mega 865
    and then see link
    http://www.msi.com.tw/program/products/slim_pc/slm/pro_slm_cpu_support_detail.php?UID=547&kind=4
    mega 865 not support 3.2e Prescott
    maybe power supply & cooling problem

    Have you checked your XP Eventlog, I had a problem like this also and it turned out BITS (Background Intelligent Transfer Service) gave the problem.  (and booted my PC)
    I had to upgrade to BITS 2.0 and now I'm running like a charm.
    http://www.microsoft.com/downloads/details.aspx?FamilyID=b93356b1-ba43-480f-983d-eb19368f9047&displaylang=en
    Also, before I assembled my PC I had a look at
    http://www.jscustompcs.com/power_supply/ to calculate the wattage needed.
    I'm assuming the configuration in your .sig and I'm getting to 265 watts for your configuration with 3.2 prescott . (Hardly any difference with mine)
    Ray

Maybe you are looking for