MSI Z87MPOWER MAX and 3tb hdd

Hi. How can i set my computer to recognize whole 3tb in windows 7? It can only see 2 tb
Thank you for help

It does see it as 3TB, just yes, convert it and format so you can allocate and create partition
Good you found solution.

Similar Messages

MSI Z87MPOWER MAX and weird warning

I played with my samsung 840 pro and i turned RAPID mode off. Computer needed restart, and when i come back to system i get this warning :
You are not using the first BIOS ROM currently. MSI strongly recommend you to update your BIOS via MSI Live update.
I didnt update bios with live update, i just restarted comp and i didnt get this warning anymore. Even after few restarts.
My current bios version is bios v. 1.7
I updated bios with forum tool few months ago.
So my question is, what do i need to do now?
Thank you for help.

Quote from: pandaz on 05-August-14, 11:32:59
don't need to update anything as long as your system works ok
Quote from: Sea Dog on 05-August-14, 12:10:59
There is much truth in your words.
exactly its the old proverb "if it isn't broke don't fix it"

MSI P6N SLI Platinum + 3TB HDD

Hello, I want to buy a 3TB SATA DRIVE for my old MSI P6N SLI Platinum and i want to know if i will have any problem!
SPECS:
MSI P6N SLI Platinum (nForce 430i) Bios v1.7
Intel Core 2 Quad Q6600@3Ghz
4x1GB Kingston ValueRAM 1Gb DDR2 800
F.A. XION XON-630F12P 630 Watts
Sapphire Radeon HD 5850 Vapor-X 1GB DDR5
Windows 7 Professional x64
HARD DRIVE:
3TB TOSHIBA DT01ACA300
thanks!

As I already said:
Quote from: flobelix on 29-January-13, 23:58:02
No, that won't work as that requires a UEFI bios and GPT format which is both not possible with your old board just supporting classic bios. You won't be able to access the entire drive space which makes a (costly) 3TB HDD quite useless.
Better just get nothing above a 2TB HDD.
Connection won't change that.

MSI GNB MAX and RICOH R5C476II PCI to Cardbus bridge not working! Help

Why my PCMCIA & CARDBUS Card Reader based on RICOH R5C476II Chipset not
working on MSI GNB MAX BOARD (with newer bios 2.3)???
My Card reader is fine and working properly on many ithers motherboards like: ABIT BD7-II based
on Intel 845E Chipset, or ASUS TUSIM, ASUS TUSL, and ASUS PIIIB-F
Why ??
Please help me.

Yes, sure. I'm trying to use all of five PCI slots, and after slot chnge I,m setting Reset Configuration data in BIOS.
result is the same in all Card positions. Card is detected, but not working corectly.
I'm trying to resolve any hardware conflicts by disabling all od internal mothebrord components like IEE1394 Audio, Serial Ata and others - no cahnges, no solutions ....

MSI 648 Max and ipods? Prob's connecting.

Please can anyone help?
I have a MSI 648 Max board with on-board usb2 and have problems connecting to my 4G 20Gb iPod. I'm pretty sure it’s the USB connection that is the problem. Has anyone else had this? Can anyone suggest anything to help? This is my last port of call before I’ll have to folk out for a Firewire card which I really don’t want to do.
Thanks.

Thanks for replying .
I have used USB for a number of devices (Printed/Mouse/DigiCam) and have never had any noticeable problems. I’ve tried the disconnecting thing and it didn’t seem to have any effect.
I thought it might be something to do with iPod’s not liking on-board USB and decided to post a topic here to see if anyone else has had a similar problem. Doesn’t seem to be much talk of iPod’s though. I wondered if MSI knew of any problems.
I have been around a few iPod forums but not many people seem to be using on-board USB.
Keep the suggestions coming though. Thanks.

MSI 845GE MAX and temperature of power spully

Hello !
I have one problem. I have MSI 845 GE MAX mainboard, Creative Geforce Ti 4600 graphic card, 512 DDR 333 memory and power supply from max power 400 W. When I look in Sisoft Sandra 2003 Professional on mainboard information - temperature sensors I see that power/aux temp. is 53-59 celzius. I changed to new power supply and problem isnt gone. What is wrong does enyone now ? Please help me. THANKS ! ! !
Fila

There is no power supply temp sensor installed, the program is just getting random readings from a non used sensor.

MSI Z87MPOWER MAX correct updating bios

Z87 M POWER MAX
i7-4770K
Gigabyte GeForce GTX 760 4GB WindForce 3X OC
Crucial Ballistix Tactical 32GB 1600Mhz cl8 KIT - 1.50V
Noctua NH-D14(modified)
Corsair AX 860
840 Pro Series SSD - 256GB
Hi. I wont to update my bios to version: version 1.7
http://www.msi.com/product/mb/Z87_MPOWER_MAX.html#download
There is a red warning:
You must use the following methods to update this BIOS.
- Use MFlash to update "BIOS + ME"
- Use MSI Live Update
I know that Live Update is not recommended for updating bios.(unless si this something new?)
So my question is: what exactly should i do to update bios correct way?
Best regards and thank you for help.

Use the method and file following file (you MUST use the attached archive) to flash version 1.7
>>Use the MSI HQ Forum USB flasher<<
A.) Download the attached archive and place it on your desktop. Do not decompress.
B.) Download and install the Forum flash tool.
C.) Insert your FAT32 formatted usb stick.
D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.
Once the flash is complete, you must download and install the latest ME drivers.
http://www.msi.com/product/mb/Z87-MPOWER-MAX.html

MSI Mpower Max and Team Group LV 2400 Memory (Samsung)

Bios 1.31b is fine, but afterwards seems to have a problem with my memory modules, even at XMP settings they are difficult to boot. I am pretty sure it is related to a single value called tWR. For some reason the tWR value in the later bios are limited to be adjusted between 0 and 16. My modules need it to be 18 to boot at XMP.
I really want those later bioses, because of the faster PWM and the Legacy optimizing for benching. Please tell me where to post these to get my memory modules working.

If you want to report an issue you found contact MSI: >>How to contact MSI.<<
This is a Users-to-Users Forum. MSI creates the beta versions.

MSI GX60 3BE and SSD/HDD (RAID0, height 7/9,5 mm)

Dear Friends
Please answer the following questions, if you don't mind:
1. Will SSD or HDD with a height of 9.5 mm will fit the MSI GX60 3BE, or only 7 mm?
2. Is it possible to use RAID 0 with 2xHDD? Are the drivers are included on the DVD, so I can install Windows 7? As far as I know during the installation of Windows 7 you need to specify the path to the drivers for RAID?
Thank you in advance for your replies.
Best regards.
Sincerely

Hi, Thanks for your reply.
But it is in fact a 2.5" SSD (no typo in my first post), but has only 7.5mm height. ((There will also be some 1.8" ssd models available in the future but I ordered the now available 2.5") ). So such an adapter will not help. For this mentioned SSD-bracket, I have to wait for my x200t being shipped (hope its coming soon) but I didn't see anything like that on any ibm/lenovo accessory page.
Edit: Kind of solved itself today when I got the SSD. It's in fact 7.5mm in height but there is a small 2mm frame mounted around it (which one could unscrew, if necessary). So in the end it's a "normal" 2.5" 9.5mm device
Regards
Message Edited by Elador on 11-28-2008 02:57 AM

MSI P45 Platinum and 6 HDDs

Hello friends,
i have this strange problem, i have 6 hard disks connected to ICH10R on my mobo. Everything is detected in BIOS on ICH10R. I have created these volumes:
RAID0+RAID1 on first and second disks and other 4 disks are in RAID5,BUT:
when my OS load, storage manager find degraded raid5 volume and missing the last (6th) disk.Someone have any ideas?Thanks in advanvce!
My OS: Windows XP x64 SP2
last version of the matrix driver 8.8.0.1009

I have done some more continuous tests with intelburn test and memtest and i think already, that definitely problem is NOT CPU and RAM.
I have done some tests on hdds and the results on all 4 disks are the same:
[SELF DIAGNOSTIC (ESTOOL v2.11a)]
Model Name : SAMSUNG HD103UJ
Rom Revision : 1AA01113
Serial Number : S13PJ1CQ610012
Drive Size : 953868MB (LBA : 1953523055)
Test Loop Number : 1/1
>> READ DMA : Testing... Pass !
>> CHECK S.M.A.R.T. : Testing... Pass !
>> SPIN DOWN / UP : Testing... Pass !
>> SIMPLE SURFACE SCAN : Testing... Pass !
>> WRITE VERIFY : Testing... Pass !
>> RANDOM SURFACE SCAN : Testing... Pass !
>> READ SURFACE SCAN : Testing... Pass !
>> RAM VERIFY TEST : Testing...
Service Code => AJ29 : RAM Error.
Error : Command timeout
>> MULTIPLE READ TEST : Testing... Pass !
Service Code => AJ29 : RAM Error.
Scan Elapsed Time : 03:24:30
Error Occured Test Loop Number 1
Test was completed.
There are 3 disks with fw 1AA01113 and 1 with 1AA01119. I don't know what that RAM error means (maybe disk cache), but i don't think this is the problem (the 4 disks are buyed from different time period), maybe just estool has some bug.

MSI 648 Max and Radeon 7900 pro

I have big troubles trying to setup my video card ATI Radeon 7900 pro. I try several drivers from ATI, I've tried Radeonator to downclock the video card, but the system is still very instable, hanging in every games (AoM, WC3) after few seconds, and even hanging while doing elementary stuff with the PC.
Anyone know something about this pb ?
Is it specific to the video card (i ca see a lot of pb with this card) ?
Is there a compatibility issue between video card and this mother board ?
Thanks in advance.

You can try going back through the earlier posts. I know there were quite a few dealing with the Radeon9700 and the 648Max. I don't have the Radeon so I can't help much if the problem is really related to that card. One thing you might check right off are the voltage readings in the BIOS. I know you need a pretty good power supply with that combination of motherboard and graphics card. I also know that there were some other issues as well.

MSI GNB Max and P4 3.06 with 56C Idle (Bios)

is that ok or to high, i know about some bugs with the Temp Sensor so there are my 2 cents ! :D
Please give me some feedback thx. !

I had the exact same problem. I bought a Cooler Master IHC-H71 CPU cooler and it brought me down to 40-44 at idle. Ordered it from http://www.phamcomputer.com

MSI blutooth key and USB 2

Dear everybody
I have a p4 with the desktop board d850EMV2, each time i plugged my usb bluetooth key , the system freez and i get a message at the right corner : power surge !
or something like that: Power exceed the maximum ....
i can not use my usb key on usb2 port , i check the bios , the usb is enable .
please reply to me on my email address
[email protected]
Thanks for your Help

I have MSI 850E Max and happy about the board itself. Recently purcased a bluetooth device and wondering what does exactly means that this board support bluetooth ? Do I have to buy an USB/Bluetooth adapter or MSI migth have a bracket that will take bluetooth connection (I do see a jacket on MB).
I have purchase msi mb with 2 optional brackets (2 ports USB, 1 USB + machine stauts). Have I missed something ?

Msi k7t pro and hdd crash

Hi.
I have a problem and i hope some of you can help me.
I have msi k7t pro and maxtor diamond max plus 8. disk crashed before few days after using it 3 months. Before that i had maxtor 540 series and he crached after 18 months of use.
Two disk had spin up and seek time problems. Whell at least siguardian "sad that".
Could this hdd crash be from nonquality disks or the could be caused from some other part of pc.
And now i have option to chance maxtor with seagate.
What do you thing about seagate disks.
thanks

a poor psu is all i can think

Windows XP and MSI 648 Max

Can anybody give me a good tips, whats wrong when Windows XP installation (BSOD) failed on a computer with MSI 648 Max, I can see that is many in the some siuation as me. But no one of the solutions looks like i good one. Is it somebode that have find out the problem, or?

Its a good idea, but the RAM that I use is the same thats worked fine in the computer earlier. Its DDR DIMM 3100 TwinMOS, and thats a good stuff if I know it right?.
I have tried to take out the harddisk and placed it in another computer, and installed Windows XP. After that I placed the harddisk in the computer with the MSI motherboard, and I get I/O error and it couldnt red from the harddrive. I think that its the 250 watts powersupply, as the problem. I have looked i BIOS and under PC Healt, and there I could see that the +12 V and -12 V will only give +/- 11-11,5 V. Now I have purchase I new bigger powersupply, and hope that gonna fix the problem.

MSI Z87MPOWER MAX and 3tb hdd

Similar Messages

Maybe you are looking for