MSI Z97 Gaming 7 (A2 ERROR CODE)

Hi everyone, because I have a problem with my Motherboard MSI Z97 Gaming 7 is that when I turn on my PC after display the code 99 and 9C, remains suspended in A2. From what I've read, this code is for a hard drive failure. The system remains in A2 indefinitely code until the reset button is pressed PC. In the second restart smoothly enters the operating system.
My System Hardware is:
*MSI Z97 Gaming 7 (1.90 BIOS)
*Intel Core I7 4770K (NO Overclock)
*16GB Corsair Vengeance (2x8GB) Memory
*MSI R7970 Lightning X2 CrossfireX
*Crucial M4 128GB SSD
*Seagate Barracuda 1TB Hard Disk
*EK Custom Liquid Cooling System
*Generic All in One Card Reader
*LG DVD/RW Drive
*Corsair AX1200i Power Supply
Then I tell them what I have tried without success this problem.
* Update BIOS to 1.9 Versión (Latest)
* Update SSD Firmware to 070H (Latest)
* Change SATA Cables
* Change SATA Ports
* Reinstall Windows 8.1 in UEFI and Legacy Mode
* Test each Ram Memory Sticks
* Disconect internal USB Card Reader, Front Ports and Corsair Digital Link
* Test try another SSD (Kingston V300 128GB)
After trying all these things, the system is still hanging in A2 Error
Thanks for any help you can give me.

Quote from: pandaz on 24-April-15, 13:03:29
You could try your device 1 by 1 and see which one of it is causing the A2 issue
about this i already suggested the same:
Quote from: Svet on 23-April-15, 21:42:28
connected them one by one, and see which is causing this hang eventually
he said any one of them alone is caused this A2 when its connected:
Quote from: sebastianmancipe on 23-April-15, 21:49:10
Already perform this test with any 3 devices, SSD, HDD or DVD's the same.
Curiously hangs on A2 code when first turned not when restarted.
Quote from: sebastianmancipe on 24-April-15, 04:12:03
¿this version of BIOS where it came from? It is official? because they have not posted on the official website of the Z97 Gaming 7? as had understood the latest BIOS for this motherboard is the 1.90
its official, but beta bios and newer than your current.
try all other things 1st that people suggested you, leave bios flashing as last option

Similar Messages

Z97 gaming 5 error code 26

So im troubleshooting a new build and the computer turns on but not post and I get the LED code 00 then 15 then finally 26 but I cant find any reference of code 26- anyone know what it means?
Cheers

So i found that when I moved 1 stick of ram to dimm slot 4, it works and boots up.
However, if I add a second, paired stick to slow 2, the same "26" code appears and the same is true if I have all four sticks in.
I checked in the BIOS to make sure the RAM was set up with the correct voltage and i also have tried each stick indvidually AND in different slots,to no success aside from one stick in Slot 4.
any ideas? Here is my build:
Board: MSI Z97 gaming 5
VGA: Asus GTX 970 Strix DirectCU II OC 4GB GDDR5
PSU: Be Quiet Pure Power L8 630W Semi Modular 80+ Bronze Power Supply
Intel Core i7 4790K 4GHz Socket 1150 8MB L3 Cache Retail Boxed Processor
MEM: Crucial 16GB kit (8GBx2) DDR3 1600 MT/s (PC3-12800) CL9 @1.5V Ballistix Sport UDIMM 240pin
HDD: Crucial MX100 256GB SATA 6Gbps 2.5inch 7mm
COOLER: Cooler Master Hyper 212 EVO AMD Intel Processor Cooler
OS: Windows 7 64bit home
thanks again

MOVED: MSI Z97 Gaming 5 - Debug code e0

This topic has been moved to GAMING Motherboards.
https://forum-en.msi.com/index.php?topic=254267.0

Hi,
Can you please be more specific on system components you have? See >>Posting Guide<<
With taking battery out.. see >>Clear CMOS Guide<< It should clear BIOS into default values. So once you remove the battery and unplug power cord, it should (after 5~ mins) go back to default settings so you could then replace the battery back and power PC up and see if it helped anything.
Also would be worth if you try without graphics card and any HDD/SSD but with only: CPU, 1 RAM stick, PSU, Motherboard of course and maybe HDD/SSD that has OS on it, and monitor obviously so you can see if anything happens. Disconnect anything else (keyboard, mouse, speakers) etc.

MSI Z97 Gaming 7 not booting up

Hi guys,
I have just purchased new motherboard & new intel core i7 4790K. I've installed everything & when I tried to boot up the system it stuck to 72 error code during post checks in manual which states as "Late South Bridge Initalization" Please help guys as I m not able to boot up the system.. My configuration is as follows:
Intel core i7 4790k
MSI Z97 Gaming 7 MoBo
Corsair XMS 3 4Gb RAM
Corsair H100i CPU cooler
Corsair CS750M PSU
NZXT Source 530 cabinet
Please help guys ....

Hi
What you can do is either:
-Return the board (RMA)
-Try to straighten it yourself using needle, magnifying glass and bright light
-Ask local jeweler if they can straighten it up for you.

Msi z97 gaming motherboard displays debug led D0 (00) .

Hello all.
I urgently need some advice.
I recently bought a msi z97 gaming 5 motherboard and I had it installed into my rig. Everything was working fine. I decided to do some cable management in my case today and afterwards wanted to switch my pc on to find it dead. I switched off the power and made sure that I discharged all electrostatic power.
The psu delivers power to the board as all the case fans spin, the light trail lights up an my fan controller works.
My peripherals (key board, mouse) don't light, as well as my monitor. There is ia also no boot beeps.
The debug led displays a code 00 which is not in the manual. I already tried removing the cmos batery and also cleared the cmos with the cmos jumper en still nothing.
I even removed both my ram modules and still no boot beeps.
If there is someone out there please help...

i got the same issue by chance few days ago 00 error but with dual bios chip board.
and able to fix it,
i narrow it down that somehow the bios chip selection wasn't switched ..
even after power off, and flip the switch i meet 00 error and no LED on bios chip has light
switching to the secondary bios chip worked fine,
then when i flip the bios chip while the system was booted, switching was successfully,
and at next power off and power up was booting with the other bios chip fine and no longer 00 error
however for your board, i see board has 1 bios chip only
im not sure if would have bios chip led indicator or not..
checking high res image of your board at: https://media.msi.com/main.php?g2_itemId=110010&g2_imageViewsIndex=1
think i can see the led indicator side by side to JBAT1
so your board probably also should have bios chip led indicator
and based on your second photo that you provided: https://forum-en.msi.com/index.php?action=dlattach;topic=253991.0;attach=22345;image
i don't see this LED to light... it should be near to 00 debug code
so probably bios chip doesn't kick in for some reason...
and i don't know how this can be fixed since your board don't have dual bios chips..
looks like something become damaged when you tried to re-arrange your cables..
else don't have idea what else you can try, except to rma the board

Z97 Gaming 5 Debug Codes 41, 42, 43, and 44

Just built my first PC and I am having issues with it.
I have it plugged into a monitor and it does not display anything but I am getting codes on debug codes on the motherboard.
My build is below in case it helps.
CPU: Intel Core i7-4790K 4.0GHz Quad-Core Processor
CPU Cooler: Cooler Master Hyper 212 EVO 82.9 CFM Sleeve Bearing CPU Cooler
Motherboard: MSI Z97-GAMING 5 ATX LGA1150 Motherboard
Memory: G.Skill Ripjaws X Series 8GB (2 x 4GB) DDR3-1600 Memory
Storage: Western Digital Caviar Green 1TB 3.5" 5400RPM Internal Hard Drive
Video Card: MSI GeForce GTX 970 4GB Twin Frozr V Video Card
Case: Thermaltake Level 10 GT Snow Edition ATX Full Tower Case
Power Supply: EVGA SuperNOVA 1000G2 1000W 80+ Gold Certified Fully-Modular ATX Power Supply
Optical Drive: *LG UH12NS30 Blu-Ray Reader, DVD/CD Writer
Operating System: Microsoft Windows 8.1 (OEM) (64-bit)
Like the subject said I am getting a few error codes.
It starts at the lower numbers than sticks around for a bit eventually moving to the higher ones and seems to cap at 44.
Any help on this issue would be immensely appreciated.
Also as a side note I have checked the users manual error code listings but it doesn't seem to contain these specific codes. If I am wrong on this could you tell me where on the manual it lists these?
Thank you very much for your time.

Quote from: brettrodie on 22-March-15, 04:26:05
I get visual output when I unplug my video card.
When entering the boot menu and selecting UEFI: Built-In EFI Shell I get the following
EFI: Shell version 2.31 [4.655]
Current running mode 1.1.2
Device mapping table
blk0 :BlockDevice - Alias (null)
PCiRoot(0x0)/PCi(0x1f,0x2)/Sata(0x0,0x0)
blk1 :BlockDevice - Alias (null)
PCiRoot(0x0)/PCi(0x1f,0x2)/Sata(0x0,5x0)
Press ESC in 1 seconds to skip startup.nsh, any other key to continue
Shell>
Doesn't matter what I press it doesn't do anything
Entering setup instead of the EFI shell takes me to MSi's click bios 4
When I enter the board explorer it shows all the components that I have plugged in as running.
I am at a complete loss to what I need to do to install updates, OS, and to get my video card working.
listed above sounds correct
you need to boot from a bootable device who contain your OS installation disk to proceed with OS install.
about your Video card
when you install it, in which slot is placed?
and have you connected your display to it after that? [not to onboard GPU]
and have you attached all power cables for it?

Crash by gaming with MSI z97 Gaming 9 AC/ MSI 980GTX

Dear MSI Form
The last couple of weeks I have a very bad crash,
This is my system:
Windows 8.1 64
Mother board: MSI Z97 Gaming 9 AC
GPU: MSI GTX 980
CPU: Intel core i7 4790K 4 GHz
CPU Cooler: Cooler Master Nepton 240M
Memory: 16GB 4x4 Corsair vengeance pro
Hard disk: 2 X 1TB 1 X 1TB SSD
Power supply: Be quiet! Power Zone 650W
Case: Cooler Master CM Storm Trooper Window
Fans: 9X Be quiet! Shadow wings + Fan controller
I use my pc mostly for gaming,
I bought en build my pc on September 2015 but now and then I get a very bad crash, the crash shuts down my pc (no blue screen / no Error) just a black screen with a pc that won’t respond on anything. The lights are on at my motherboard cpu cooler and GPU, but no respond. To turn my pc on again I have to shut down the main power switch. After 10 seconds I can start up my pc again.
I get the following windows event: id 41 kernel power
Scenario:
This began when I played Dragon age 3 in December, I got the crash twice in like 100 hours. (not a big deal) than I got the same crash once when I played GTA V with 60 hours more or less. But now when I playing the Witcher 3 wild hunt I get it every 5 minutes.
What did I try to fix it but won’t work:
- Memtest run x10 no error
- Drivers up to date
- The temps under full load are great CPU they won’t go over 51 degrease / GPU 68 degrees / the rest won’t go over 45 degrees.
- I got no virus.
- Everything is connected just fine.
I hope you guys can help me out.
Kind regards,
Tijs Dragtsma from the Netherlands

May be your PSU being too weak or going bad (I doubt though). Although you have 9 fans.. maybe try disconnecting case fans and leave only CPU cooler ones to work?

DIMM 1/2 stopped working on MSI Z97 Gaming 5, help!

Hello again!
Today I was trying out a different cooler for my i7 4790K, I mounted it and everything worked fine, but results were bad, so I decided to mount previous cooler again...
And here were the problem starts. After I mounted everything back (exactly following guide like before, thermal paste etc all done) my PC would not start the system nor BIOS.
I wondered what could cause it, so just to check a possibility, I unplugged one RAM module from DIMM 2 (they used to work in dual-channel at 2/4 DIMMs) and it suddenly started BIOS and system up normally.
Following this tip, I unmounted cooler's fan, because it covers DIMM 1 to check if it would work, and doesn't matter what memory I plug in DIMM 1 or 2, it won't work Doesn't work with any combination, so I can't actually use dual-channel right now, as only DIMM 3 and 4 work at the moment (both or alone). Any module plugged in 1/2 slots doesn't work.
All I see is that temperature monitor on my MSI Z97 Gaming 5 shows 10-55, 10-55 all the time, jumpy temps, everything works, but nothing loads. Just black screen, nothing. I work with 3/4 slots in single channel right now.
What the hell could happen? Please help me with this!
Edit: Is that possible I could move a CPU from a proper pin so it doesn't connect properly with DIMM 1 and 2? My cooler moved a bit before I mounted it properly. That's only thing that comes to my mind right now.

Quote
EXTENT OF LIMITED WARRANTY
Intel does not warrant that the Product will be free from design defects or errors known as “errata.” Current characterized errata are
available upon request. Further, this Limited Warranty does NOT cover:
any costs associated with the repair or replacement of the Product including labor, installation or other costs incurred by you, and in
particular, any costs relating to the removal or replacement of any Product that is soldered or otherwise permanently affixed to any
printed circuit board;
OR
damage to the Product due to external causes, including accident, problems with electrical power, abnormal electrical, mechanical or
environmental conditions, usage not in accordance with product instructions, misuse, neglect, alteration, repair, improper installation, or
improper testing;
OR
any Product which has been modified or operated outside of Intel’s publicly available specifications or where the original identification
markings (trademark or serial number) has been removed, altered or obliterated from the Product.
http://download.intel.com/support/processors/sb/warranty_procts_english.pdf
So if you have bent the pins and didn't buy the "care package" or whatever they call for improved warranty, then I believe that it is void. But read whole PDF carefully.
I might be wrong, I'm just a human. Contact Intel about this:
http://www.intel.com/p/en_US/support/warranty

MSI Z97 gaming 7 + intel i7 4790k

Hello. I bought the M/B MSI Z97 gaming 7. While I don't know what version of BIOS firmware installed. And I couldn't check it, because I only bought the motherboard. I want to buy a CPU for this motherboard - intel i7 4790k. Latest firmware version for this motherboard specified on the official website is 1.8
- Updated the VBIOS and GOP driver.
- Updated CPU Micro code to support new Intel CPU.
- Improved Asmedia SATA device compatibility.
When updating the BIOS via M-Flash, please make sure that your USB storage device is recognized as a "Removable Device",
If your USB storage device is not recognized as a "Removable Device", please update the BIOS via MSI Live update under windows.
Maybe this will turn out, that this processor (intel i7 4790k) will not work for this motherboard because of outdated firmware, and flash card is not recognized so I can't flash the BIOS or through a flash card or through Windows ?

Quote from: 964758 on 23-January-15, 22:33:17
Dear friend. Another question. How you understand about version of BIOS firmware by serial number of motherboard ? B - (means BIOS), 14 (means version 1.4) ? Do I understand correctly ? I will be waiting for your reply
NO you have that wrong and I will explain it to you:
its based off DATE! you can work out roughly what it will have shipped with by just cross-referencing the manufacture date and the BIOS release dates and which one was available at the time!
here is how you tell when it was made from MSI: S/N: 601-7916-010B1406030678 that is the date code in RED (Format YY/MM/DD) so that puts your board as made at 14/06/03 so it will have the BIOS version that was available at that time!
Nichrome has made a slight Mistake here your board actually has BIOS version 1.3 installed (>> 7916v13.zip << 2014-05-23 BIOS version) out the factory from the date code as its a early 2014 - June board towards the begging of the month (1.4 was not out till the end of the month)!
your board Will still support the chip (i7-4790k) as its got the minimum BIOS version (1.3) for that CPU for it to work out the box with it!

MSI z97 gaming 7 , the computer hangs tightly

Hello ! MSI z97 gaming 7 , the computer hangs tightly. all USB are switched off, and on the motherboard the mistake 25 is highlighted. The image on the monitor too hangs. In what reason? What the mistake 25 means ? When scanning on errors of RAM by means of memtest86+ the computer also hangs, only reset helps

Quote from: 964758 on 10-April-15, 17:28:43
Evo Labs 750W Quiet Silent PC Power Supply PSU Black with Red Fan (China cheap PSU). All ports were tested by RAM, the problem remains. (I bought a used RAM). M/B a brand new
I doubt this PSU even supports Haswell? Try something from quality range (Corsair, Seasonic, Antec etc.) and see if it works then.
Also... for Xth time, I will also mention this:
>>Posting Guide<<

Msi z97 gaming 5 bios update help

Hello I recently purchased the msi z97 gaming 5 motherboard. It was working fine it came with bios version 1.0 and I wanted to update it. I downloaded the latest 1.5 bios from msi website copied to usb flash drive and flashed it using mflash. Computer powers on but black screen wont do nothing. I cleared cmos and battery and still nothing so I am pretty sure its bricked. I am going to store to exchange it for another one but I want to be able to safely update the bios without bricking again. I usually dont update bios unless needed but i need at least 1.2 bios to fully support the devils canyon cpu. Can someone please point me in the right direction? I read about the usb flashing tool in forum but also read that bios+me need to be flashed and I don't know if that program is up to date and will flash both files? I really appreciate it if someone helped thanks in advance.

Also does anyone know if it is dangerous to update the bios with a 4690k devils canyon cpu since it is not officially supported until 1.2? Is that why my first bios flash was bricked? I would hate to go and borrow another cpu just to update the bios but if I have to I will. Sorry for all the questions but I need to get my bios updated and I will not update it until I am sure of all these things. Thanks to anyone who answers these questions.

MSI GTX980 Gaming sometimes not recognized by MSI Z97 Gaming 9 AC

I have been experiencing a very odd problem with my new hardware.
Hardware
Motherboard: MSI Z97 Gaming 9 AC
CPU: Intel Core i7-4790
CPU-cooler: Scythe Mugen 4
RAM: G.Skill RipjawsZ F3-17000CL9Q-16GBZH
Videocard: MSI GeForce GTX 980 4GB GAMING 4G
PSU: Seasonic X-660 80+ Gold
SSD: Crucial M550 2,5" 1TB
Monitor#1: LG 34UM95-P
Monitor #2: Eizo Foris FG2421
OS: Windows 7 Professional
Issue description
The thing is that with 2 monitors connected the videocard is not recognized on a cold boot, but boots perfectly most of the time after a restart. In some cases a restart doesn't do the trick. I have even seen a couple of times that the monitor shows that windows starts and then the monitor loses the signal from the videocard before I can see the desktop (rare). With just 1 monitor attached the videocard is recognized. Als the IGP works fine, it's just the videocard that doesn't seem to be recognized when 2 monitors are connected (all combinations of DP, HDMI and DVI). When the computer has booted after one or more restarts and the videocard is recognized the computer works flawlessly, no problems whatever I do with it (desktop work, stressing hardware, playing games, etc.). Not a single sign of instability.
It's just the cold boot and sometimes the soft boot or restart that causes the videocard to not being recognized with 2 monitors connected.
What makes it really weird to me is that when the computer goes into sleep mode I can wake it up normally within say 10 minutes. But if I wait for let's say an hour the videocard is not transmitting a signal through the videocard.
When IGP is enabled the computer boots and windows loads normally (I hear the sound of the Windows login), although the monitors stay black when connected to the videocard. Then switching the connectors from the videocard to the motherboard shows me a normal Windows login screen, but the videocard is not visible in the device list. When the IGP is disabled to bootup sequence just hangs until a restart works and the computer boots normally with the videocard getting recognized and working properly.
Click sounds
I noticed the motherboard makes 4 click sounds when booting, like relays flipping. I think it has to to with distributing power to al the components, since it looks like components respond to the click by turning led lights on. But I have to say I've never come across a motherboard before that makes click sounds. Is this normal?
Tried fixes
- Replaced the RAM with 100% working RAM from my other computer (Corsair Vengeance LP CML8GX3M2A1600C9) -> problem persists
- Disabed XMP -> problem persists
- Replaced the PSU with another one (Cooler Master V550 Semi-Modular) -> problem persists
- Reinstalled the videocard physically -> problem persists
- Tried several combinations of connecting the 2 monitors to the videocard (all DP ports, HDMI and DVI) -> problem persists
- Replaced the videocard with a MSI GTX970 Gaming (connected with 1xDP and 1xHDMI) -> problem persists
Conclusions so far
The cause can be found in the videocard or motherboard (probably BIOS issue).
Who can shed some light on this issue?

Quote from: JLio01 on 14-November-14, 17:02:39
Try all PCIE slots no luck? Does the black screen always happen on one certain monitor or both?
I tried both the first and the second PCIe slot. No difference except for the fact that in the second slot the card only works at x8 bandwidth.
Quote from: jotan.va on 24-November-14, 18:05:51
BTW - Did anybody try to remove the wifi module from the board and then test?
I didn't install the wifi module in the first place.
UPDATE
I returned the motherboard to the webshop I bought it from and sent my cpu, ram, psu and videocard (GTX980) with it so they could test it. They found out that the videocard is the problem. So now I have to send the videocard to the webshop it bought that from. However, I am suspecting that it's just a VBIOS problem and not some fault in the hardware itself. On the other hand, it would be very strange that MSI would release a videocard that cannot work with one of their own top motherboards, wouldn't it?

MSI Z97 Gaming 9 AC - Intel Wireless AC 7260 module don't work

Hi,
Please help me, i started my new rig and the wi-fi module (that hard to fit in the mobo) don't even appear in device manager.
I already tried to dismount and remount the module on the motherboard with extreme care, no success.
Here is my rig:
Main Board: MSI Z97 Gaming 9 AC
Bios Version: 1.4
Video Card: R9 290X
Memory: 16 Gb Corsair Vengeance 2400Mhz
Processor Intel 4790K
OC: Not yet
Operating System: Windows 8.1 Pro 64
Please help me

Recheck your WiFi Bluetooth expansion module connection on the board.
Recheck your MB mounting in the case, i.e. errant standoffs. Perhaps test the board outside the case on a non conductive surface to ensure no potential short exists. Then retest with the WiFi plugged in.

MSI Z97 Gaming 7 PWM Fan setting question

Hello, right now I'm using Z87 motherboard from others vendor (as***k), and now I want to change my motherboard to MSI Z97 Gaming 7. But there's something that I want to ask first. When I'm using still using Z77 motherboard which is MSI Z77A-G45, I can set the PWM fan to change it speed automatically by change the CPU fan to auto in the UEFI. But in the Z87 I currently use I have to customize it in the UEFI, so that my PWM CPU fan change its speed as the CPU temperature changes, it can't be set to auto and I don't like it at all. Now that I want to change my motherboard to MSI Z97 Gaming 7, I'm searching the review first. And I'm seeing that it have similar fan setting with the Z87 motherboard that I currently use
I want to ask, is it possible that I can set the CPU fan setting to auto just like the Z77A-G45 I used to have?

Quote from: Abula on 19-May-14, 08:22:10
What you are seeing is mulitple breakpoints of temperature, as you do on your AsRock.
I own a Z87GD65, and in mine i only have 1 true breakpoints, which is the temperature in which you want the fans to speed up, according to the temperature of the cpu. I als did a build for a friend on a Z77GD43 and it was similar just didnt had the graph, as it has on the Z87GD65 nor the new one that you posted on the Z97 Gaming7, but what i see is more customization on the new motherboard, with 4 different breaking points, i see the same restrictions on the PWM %, increments of 12.5% as it is on my GD65, weather its worth it, personally i dont care, one is good enough for me, i usually just spin down my fans to the lowest i can, and set the breakpoints for the temperature i want my fans to spin up, if the temperature is reach they will increase gradually, defined by the max PWM % and max temperature, this two variables (that you can change) will make the graph with more or less inclination. In the new Z97 Gaming 7, seems the same just multiple breakpoints, meaning you can have different inclinations into how the fans react depending on the temperature, weather its worth it or not.... depends on the level of customization you want to the fan control, personally im fine with a single, but i can see people that could like having depending on their needs, personally what i would have loved though, is to give me 10% increments instead of 12.5%, or 5% would been better, but 12.5% just seems odd number imo.
Remember, MSI only has 2 true PWM fan headers, CPU_FAN1 and CPU_FAN2, even though all are 4pin physically the SYS_FAN are not true pwm fan headers, they are voltage controlled and have much higher restrictions than the real PWM fan headers. And remember that if you plug 3pin fans on PWM fan headers they will spin at 12V that its the voltage that its handled by PWM fans, so be careful what fan you plug into where to have control on them.
Hmn, so since Z87 MSI use that breakpoint system to control PWM fan, just like my asrock Z87. So there's no auto setting on your Z87GD65?

Microphone issue with MSI Z97 GAMING 5

Hi there!.
I have just set up my new computer and i have problems with my microphone. My mainboard is a "MSI Z97 GAMING 5" and my box: NOX Coolbay SX.
I have installed the drivers from disk and tryed also searching drivers on the web of MSI. I can hear with my speakers with no problems, same with my headset. But there is no way to use my microphone. I put it in the front panel, then i checked the control panel - sound and Windows tell me that the microphone is connected, but dont work. if i put it in the back panel, the realtek HD administrator tell me that something is connected in the microphone slot but WIndows dont detect it.
in the BIOS, the HD Audio is ENABLED. I dont have any idea about what to do now. I have search on this forum but i havent seen this same issue. Can you help me?
Thanks and sorry about my english.

ill post my specifications
Board: MSI Z97 GAMING 5
Bios: Version 1.0
VGA: MSI GeForce GTX 760 Twin Frozr OC 2GB GDDR5
PSU: Nox Urano VX 750W PFC
Intel Core i5-4670K 3.4Ghz Box 1150
MEM: G.Skill Ripjaws X DDR3 1600 PC3-12800 8GB 2x4GB CL9
HDD: Seagate Barracuda 7200.14 1TB SATA3
COOLER: Katana 4
OS: Windows 7 64bit Professional

MSI Z97 Gaming 7 (A2 ERROR CODE)

Similar Messages

Maybe you are looking for