MSI Z97 Gaming 7-can't use integrated GPU alongside dedicated for quicksync OBS
Hello, I've encountered a problem with my new MSI motherboard (I hope). I can no longer select the option to use the secondary virtual display with the integrated GPU. This was not a problem with my old Gigabyte Z87-D3H motherboard. I have enabled the iGPU in bios with the multi-monitor support turned on, re installed both Intel graphics and nVidia drivers but I still don't get the option. In device manager and Display Driver Uninstaller utility the HD 4600 shows up, which appears normal.
I am running a single monitor, MSI GTX 970, Intel i5 4670k.
EDIT
Quote from: TZBC on 23-December-14, 11:44:17
Initiate graphic adapter - PEG
IGD Mutli-Monitor - Enabled ?
Yes, as I have mentioned above I have enabled it.
Quote from: TZBC on 23-December-14, 11:44:17
What's your driver version?
GeForce 344.75 ?
Yes, it's updated to the latest version.
In OBS the Quicksync option can be enabled, however the CPU usage stays the same while streaming and the iGPU usage always stays at around 15%.
Similar Messages
-
MOVED: MSI Z97 Gaming 7-can't use integrated GPU alongside dedicated for quicksync OBS
This topic has been moved to GAMING Motherboards.
https://forum-en.msi.com/index.php?topic=251692.0Quote from: TZBC on 23-December-14, 11:44:17
Initiate graphic adapter - PEG
IGD Mutli-Monitor - Enabled ?
Yes, as I have mentioned above I have enabled it.
Quote from: TZBC on 23-December-14, 11:44:17
What's your driver version?
GeForce 344.75 ?
Yes, it's updated to the latest version.
In OBS the Quicksync option can be enabled, however the CPU usage stays the same while streaming and the iGPU usage always stays at around 15%. -
Can I control 3-pin fan with MSI Z97 gaming 5?
Hello, I want to know if I can control 3-pin fan plug into 4-pin header with MSI z97 gaming 5 mobo
Thanks
PS: Sorry my poor englishI own an MSI Z87-GD65, im assuming your Z97gaming5 is similar, mine can control 4pin PWM fans on the CPU_FAN1 and CPU_FAN2 headers, and can control 3pin fans on SYS_FAN 1,2,3, all of this on bios fan control (i dont like nor use the Control center). The limitations of my bios is that on 4pin fans on CPU_FAN1 i can go to 12.5% pwm (as long as the fan can reach this low), while on the 3pin con SYS_FAN i can only drop them down to 50% (thats if you fan can start at that voltage, had one that needed 60%), the fan can be ran at a steady % = rpms or can be dynamically ramp up with the CPU temp, thats also selected on the bios.
Here is a run that i did last weekend on a Silverstone AP182 connected on SYS_FAN3 on pure bios, you can see there the different % and rpms, and in the bottom you can see prime95 run where it did ramp the fans with the cpu temp. -
MSI Z97 GAMING 3 Review--Performance Testing
After the previous hardware and software introduction, I believe Z97 GAMING 3 will meet gamers’ expectation.
Z97 GAMING 3 integrated with Killer E2200 LAN, Audio Boost 2, M.2 interface and the normal array of connections,
It is truly a good gaming motherboard. Could all these features offer great performance and a good experience?
Today I will test the performance of Z97 GAMING 3 and how good it is.
MSI Z97 GAMING 3 Testing
My test platform is MSI Z97 GAMING 3, Intel ® Core i7-4770K and MSI GeForce GTX 750 graphics card. The test
consists of two parts:
CPU Performance: Super PI, PC Mark Vantage and Cinebench R11.5.
GAMING Performance: 3DMARK 11, Evil 6 Benchmark and FFXI Benchmark.
Test Part 1
CPU : Intel Core i7-4770K @ 3.5 GHz
CPU Cooler : Thermaltake TT-8085A
Motherboard : MSI Z97 GAMING 3
RAM : Corsair DDR 3-1600 4GB X 2
PSU : Cooler Master 350W
OS : Windows 7 64 bit
Basic performance testing (CPU setting by default)
CPU Mark Score : 679.
Super PI 32M Result – 8m53.897s.
Graphics Performance Testing:3DMark 11
3DMark 11 is designed to measure PC’s performance. It makes extensive use of all the new features in DirectX 11
including Tessellation, Compute Shader and Multi-threading.
Intel ® HD4600 iGPU in 3DMark 11 Basic mode testing, the results is X385 Score.
Performance mode test score is P1511 .
System Performance:PCMark Vantage
PCMark Vantage is a PC analysis and benchmarking tool consisting of a mix of applications such as based and
synthetic tests that measure system performance.
From the test results, the score of Z97 GAMING 3 with Intel ® HD4600 iGPU is 11,946.
MSI GeForce GTX 750 Testing
Test Part 2
CPU : Intel Core i7-4770K @ 3.5 GHz
CPU Cooler : Thermaltake TT-8085A
Motherboard : MSI Z97 GAMING 3
Graphics Card:MSI GeForce GTX 750
RAM : Corsair DDR 3-1600 4GB X 2
PSU : Cooler Master 350W
OS : Windows 7 64 bit
Graphics Performance Testing:3DMark 11
Z97 GAMING 3 with GeForce GTX 750 the test scores is X1653 in 3DMark 11 basic test mode, The performance
mode test score is P5078.
System Performance:PC Mark Vantage
From the test results, Z97 GAMING 3 with GeForce GTX 750 scores 11,518.
System Performance:Cinebench R11.5
Cinebench is the software developed by MAXON Cinema 4D. Cinebench could test CPU and GPU performance with
different processes at the same time. For the CPU part, Cinebench test the CPU performance by displaying a HD 3D
scene. For the GPU part, Cinebench test GPU performance based on OpenGL capacity.
Main Processor Performance (CPU) - The test scenario uses all of your system's processing power to render a photorealistic
3D scene. Graphics Card Performance (OpenGL) - This procedure uses a complex 3D scene depicting a car chase which
measures the performance of your graphics card in OpenGL mode.
In Cinebench R11.5 test, MSI Z97 GAMING 3 with GeForce GTX 750 multi-core test is 6.87pts; OpenGL score is 73.48 fps.
Z97 GAMING 3 with HD 4600 and GeForce GTX 750 in the GAME Benchmark Test
For game performance testing, I will use Resident Evil 6 and FFXI Benchmark with the same platform.
Evil 6 Benchmark
CPU: Core i7-4770K
Game resolution setting: 1920X1080
Other setting: Default
In the Z97 GAMING 3 with Intel® HD4600 iGPU platform, score:1175 (Rank D)
In the Z97 GAMING 3 with GeForce GTX 750 platform, score: 5874 (Rank A)
I use Fraps tool to record FPS status during benchmark testing.The Z97 GAMING 3 with GeForce GTX 750 average
FPS is 202. The Z97 GAMING 3 with Intel® HD4600 iGPU average FPS is 32.
FFXIV Benchmark
CPU: Core i7-4770K
Game resolution setting: 1920X1080
Other setting: Default
The 1920X1080 resolution, Intel® HD4600 iGPU score is only 910.
However, the GeForce GTX 750 testing score is 4167. According to the official classification system, the score
between 3000 to 4499 means high performance.
I use Fraps tool to recorded FPS status during benchmark testing.
the GeForce GTX 750 average FPS is 111. Intel® HD4600 iGPU average FPS is 19.
Test Summary
MSI Z97 GAMING 3 is not very expensive. It has many features which are specially designed for gaming experience
and good performance of benchmarks. Even in 1920x1200 resolution and high quality display setting, Z97 GAMING 3
with Intel Core i7-4770K and MSI GeForce GTX 750 can easily handle any kind of games. The FPS of this system is
higher than 60 and users will enjoy no lag as gaming. It is really a good and afforadable chioce for gamers.Thx for the sharing, since there are not much reviews about Z97 GAMING 3.
-
Msi z97 gaming 5 bios update help
Hello I recently purchased the msi z97 gaming 5 motherboard. It was working fine it came with bios version 1.0 and I wanted to update it. I downloaded the latest 1.5 bios from msi website copied to usb flash drive and flashed it using mflash. Computer powers on but black screen wont do nothing. I cleared cmos and battery and still nothing so I am pretty sure its bricked. I am going to store to exchange it for another one but I want to be able to safely update the bios without bricking again. I usually dont update bios unless needed but i need at least 1.2 bios to fully support the devils canyon cpu. Can someone please point me in the right direction? I read about the usb flashing tool in forum but also read that bios+me need to be flashed and I don't know if that program is up to date and will flash both files? I really appreciate it if someone helped thanks in advance.
Also does anyone know if it is dangerous to update the bios with a 4690k devils canyon cpu since it is not officially supported until 1.2? Is that why my first bios flash was bricked? I would hate to go and borrow another cpu just to update the bios but if I have to I will. Sorry for all the questions but I need to get my bios updated and I will not update it until I am sure of all these things. Thanks to anyone who answers these questions.
-
Crash by gaming with MSI z97 Gaming 9 AC/ MSI 980GTX
Dear MSI Form
The last couple of weeks I have a very bad crash,
This is my system:
Windows 8.1 64
Mother board: MSI Z97 Gaming 9 AC
GPU: MSI GTX 980
CPU: Intel core i7 4790K 4 GHz
CPU Cooler: Cooler Master Nepton 240M
Memory: 16GB 4x4 Corsair vengeance pro
Hard disk: 2 X 1TB 1 X 1TB SSD
Power supply: Be quiet! Power Zone 650W
Case: Cooler Master CM Storm Trooper Window
Fans: 9X Be quiet! Shadow wings + Fan controller
I use my pc mostly for gaming,
I bought en build my pc on September 2015 but now and then I get a very bad crash, the crash shuts down my pc (no blue screen / no Error) just a black screen with a pc that won’t respond on anything. The lights are on at my motherboard cpu cooler and GPU, but no respond. To turn my pc on again I have to shut down the main power switch. After 10 seconds I can start up my pc again.
I get the following windows event: id 41 kernel power
Scenario:
This began when I played Dragon age 3 in December, I got the crash twice in like 100 hours. (not a big deal) than I got the same crash once when I played GTA V with 60 hours more or less. But now when I playing the Witcher 3 wild hunt I get it every 5 minutes.
What did I try to fix it but won’t work:
- Memtest run x10 no error
- Drivers up to date
- The temps under full load are great CPU they won’t go over 51 degrease / GPU 68 degrees / the rest won’t go over 45 degrees.
- I got no virus.
- Everything is connected just fine.
I hope you guys can help me out.
Kind regards,
Tijs Dragtsma from the NetherlandsMay be your PSU being too weak or going bad (I doubt though). Although you have 9 fans.. maybe try disconnecting case fans and leave only CPU cooler ones to work?
-
DIMM 1/2 stopped working on MSI Z97 Gaming 5, help!
Hello again!
Today I was trying out a different cooler for my i7 4790K, I mounted it and everything worked fine, but results were bad, so I decided to mount previous cooler again...
And here were the problem starts. After I mounted everything back (exactly following guide like before, thermal paste etc all done) my PC would not start the system nor BIOS.
I wondered what could cause it, so just to check a possibility, I unplugged one RAM module from DIMM 2 (they used to work in dual-channel at 2/4 DIMMs) and it suddenly started BIOS and system up normally.
Following this tip, I unmounted cooler's fan, because it covers DIMM 1 to check if it would work, and doesn't matter what memory I plug in DIMM 1 or 2, it won't work Doesn't work with any combination, so I can't actually use dual-channel right now, as only DIMM 3 and 4 work at the moment (both or alone). Any module plugged in 1/2 slots doesn't work.
All I see is that temperature monitor on my MSI Z97 Gaming 5 shows 10-55, 10-55 all the time, jumpy temps, everything works, but nothing loads. Just black screen, nothing. I work with 3/4 slots in single channel right now.
What the hell could happen? Please help me with this!
Edit: Is that possible I could move a CPU from a proper pin so it doesn't connect properly with DIMM 1 and 2? My cooler moved a bit before I mounted it properly. That's only thing that comes to my mind right now.Quote
EXTENT OF LIMITED WARRANTY
Intel does not warrant that the Product will be free from design defects or errors known as “errata.” Current characterized errata are
available upon request. Further, this Limited Warranty does NOT cover:
any costs associated with the repair or replacement of the Product including labor, installation or other costs incurred by you, and in
particular, any costs relating to the removal or replacement of any Product that is soldered or otherwise permanently affixed to any
printed circuit board;
OR
damage to the Product due to external causes, including accident, problems with electrical power, abnormal electrical, mechanical or
environmental conditions, usage not in accordance with product instructions, misuse, neglect, alteration, repair, improper installation, or
improper testing;
OR
any Product which has been modified or operated outside of Intel’s publicly available specifications or where the original identification
markings (trademark or serial number) has been removed, altered or obliterated from the Product.
http://download.intel.com/support/processors/sb/warranty_procts_english.pdf
So if you have bent the pins and didn't buy the "care package" or whatever they call for improved warranty, then I believe that it is void. But read whole PDF carefully.
I might be wrong, I'm just a human. Contact Intel about this:
http://www.intel.com/p/en_US/support/warranty -
MSI Z97 Gaming 7 PWM Fan setting question
Hello, right now I'm using Z87 motherboard from others vendor (as***k), and now I want to change my motherboard to MSI Z97 Gaming 7. But there's something that I want to ask first. When I'm using still using Z77 motherboard which is MSI Z77A-G45, I can set the PWM fan to change it speed automatically by change the CPU fan to auto in the UEFI. But in the Z87 I currently use I have to customize it in the UEFI, so that my PWM CPU fan change its speed as the CPU temperature changes, it can't be set to auto and I don't like it at all. Now that I want to change my motherboard to MSI Z97 Gaming 7, I'm searching the review first. And I'm seeing that it have similar fan setting with the Z87 motherboard that I currently use
I want to ask, is it possible that I can set the CPU fan setting to auto just like the Z77A-G45 I used to have?Quote from: Abula on 19-May-14, 08:22:10
What you are seeing is mulitple breakpoints of temperature, as you do on your AsRock.
I own a Z87GD65, and in mine i only have 1 true breakpoints, which is the temperature in which you want the fans to speed up, according to the temperature of the cpu. I als did a build for a friend on a Z77GD43 and it was similar just didnt had the graph, as it has on the Z87GD65 nor the new one that you posted on the Z97 Gaming7, but what i see is more customization on the new motherboard, with 4 different breaking points, i see the same restrictions on the PWM %, increments of 12.5% as it is on my GD65, weather its worth it, personally i dont care, one is good enough for me, i usually just spin down my fans to the lowest i can, and set the breakpoints for the temperature i want my fans to spin up, if the temperature is reach they will increase gradually, defined by the max PWM % and max temperature, this two variables (that you can change) will make the graph with more or less inclination. In the new Z97 Gaming 7, seems the same just multiple breakpoints, meaning you can have different inclinations into how the fans react depending on the temperature, weather its worth it or not.... depends on the level of customization you want to the fan control, personally im fine with a single, but i can see people that could like having depending on their needs, personally what i would have loved though, is to give me 10% increments instead of 12.5%, or 5% would been better, but 12.5% just seems odd number imo.
Remember, MSI only has 2 true PWM fan headers, CPU_FAN1 and CPU_FAN2, even though all are 4pin physically the SYS_FAN are not true pwm fan headers, they are voltage controlled and have much higher restrictions than the real PWM fan headers. And remember that if you plug 3pin fans on PWM fan headers they will spin at 12V that its the voltage that its handled by PWM fans, so be careful what fan you plug into where to have control on them.
Hmn, so since Z87 MSI use that breakpoint system to control PWM fan, just like my asrock Z87. So there's no auto setting on your Z87GD65? -
Microphone issue with MSI Z97 GAMING 5
Hi there!.
I have just set up my new computer and i have problems with my microphone. My mainboard is a "MSI Z97 GAMING 5" and my box: NOX Coolbay SX.
I have installed the drivers from disk and tryed also searching drivers on the web of MSI. I can hear with my speakers with no problems, same with my headset. But there is no way to use my microphone. I put it in the front panel, then i checked the control panel - sound and Windows tell me that the microphone is connected, but dont work. if i put it in the back panel, the realtek HD administrator tell me that something is connected in the microphone slot but WIndows dont detect it.
in the BIOS, the HD Audio is ENABLED. I dont have any idea about what to do now. I have search on this forum but i havent seen this same issue. Can you help me?
Thanks and sorry about my english.ill post my specifications
Board: MSI Z97 GAMING 5
Bios: Version 1.0
VGA: MSI GeForce GTX 760 Twin Frozr OC 2GB GDDR5
PSU: Nox Urano VX 750W PFC
Intel Core i5-4670K 3.4Ghz Box 1150
MEM: G.Skill Ripjaws X DDR3 1600 PC3-12800 8GB 2x4GB CL9
HDD: Seagate Barracuda 7200.14 1TB SATA3
COOLER: Katana 4
OS: Windows 7 64bit Professional -
Msi z97 gaming 9 ac compatibility bios
I wanted to know if the motherboard "MSI Z97 gaming 9 ac" is compatible with vga "N780 tf 3gd5/oc." I have upgraded the motherboard bios to version 1.4 (the latest released 06/30/2014). In case it is not compatible, you may release an update of the motherboard and make it compatible? Thanks in advance
The products to which I refer are the following:
Motherboard: it.msi.com/product/mb/Z97_GAMING_9_AC.html#hero-overview
Vga: it.msi.com/product/vga/N780_TF_3GD5OC.html#hero-overviewQuote from: Damianomsi95 on 15-July-14, 02:17:36
What is it the S/N? how do I upload it and provide it?
Quote from: GOP / UEFI Vbios requests - Read Here First on 29-March-13, 22:47:26
1.) Vbios versions vary with-in models. This is due to different variations and improvements made in time. In order for us to be able to get you the right VBIOS. We need your serial number. The serial number can be found on a sticker on the bottom of your card or on the box in which it came.
Quote from: Damianomsi95 on 15-July-14, 02:17:36
the card now I do not have here, but do not think it's possible given that black screen
Quote from: flobelix on 15-July-14, 00:51:41
a copy of the current vbios saved to file (use a system where card works, save to file, upload to some file hoster and add link here)
Quote from: GOP / UEFI Vbios requests - Read Here First on 29-March-13, 22:47:26
3.) If we need to check if thier is a more recent version. We can check your Vbios in one of two ways.
A.) Upload a copy of your current vbios somewhere and give us a link. You can save a copy of your vbios using >>GPU-Z<<.
B.) You can also just use NVFLASH >>Download NVFLASH for windows<<
Syntax:
nvflash /v >rep.txt [ENTER]
This will copy all of the information we need into a txt file you will fine in the folder in which you placed nvflash. -
MSI Z97 Gaming 7 not booting up
Hi guys,
I have just purchased new motherboard & new intel core i7 4790K. I've installed everything & when I tried to boot up the system it stuck to 72 error code during post checks in manual which states as "Late South Bridge Initalization" Please help guys as I m not able to boot up the system.. My configuration is as follows:
Intel core i7 4790k
MSI Z97 Gaming 7 MoBo
Corsair XMS 3 4Gb RAM
Corsair H100i CPU cooler
Corsair CS750M PSU
NZXT Source 530 cabinet
Please help guys ....Hi
What you can do is either:
-Return the board (RMA)
-Try to straighten it yourself using needle, magnifying glass and bright light
-Ask local jeweler if they can straighten it up for you. -
Overclocking DRAM on MSI Z97 Gaming 5
Hello again
Since I am pretty new to overclocking, I'm having some fun adjusting clocks of my hardwares, this time my Kingston HyperX modules which were reviewed as having a good OC capability. I performed some tests using AIDA64 Extreme software: memory read, memory write and memory waiting time. I tested stock 1866 MHz frequency and then I overclocked it to 2400 MHz. Here are my results:
Kingston HyperX 2x4GB 1866 MHz 10-11-10-30-1T
Memory read: 26.981 MB/s, 26.994 MB/s, 26.966 MB/s
Memory write: 27.234 MB/s, 27.270 MB/s, 27.346 MB/s
Waiting time: 52.9 ns, 53.1 ns, 52.6 ns
Kingston HyperX 2x4GB 2400 MHz 13-15-13-39-2T
Memory read: 32.800 MB/s, 32.899 MB/s, 33.127 MB/s
Memory write: 33.778 MB/s, 34.439 MB/s, 34.124 MB/s
Waiting time: 51.3 ns, 52.0 ns, 51.1 ns
Seems like adjusting memory clock to 2400 MHz frequency indeed improved memory's read, write and waiting times. Voltage increased from 1.5V to 1.68V.
I also tried with 2600 MHz, but the results in AIDA64 were worse then on 2400 MHz and even worse then on 1866 MHz.
-According to this, I believe 2400 MHz memory frequency is a maximum that my kits can be pushed, if higher frequency caused performance drop? Perhaps I could adjust higher voltage manually? Motherboard changed timings and voltages automatically.
-Are these results good? I have never overclocked memory before.
-I guess even though results show higher values of reads and writes, there won't be any difference I can actually feel?
-And last question: how do I check if memory runs stable on adjusted frequency?
MSI Z97 Gaming 5 makes DRAM overclocking totally easy as it seems!
Thanks in advanceI can see the description of my RAMs, on the package, it says 1866 MHz, it already was 1866 MHz out of the box when I firstly plugged them.
Otherwise there wouldn't be 1333/1600/1866 MHz variants right?
Anyway, is that a good overclock? -
MSI Z97 MPOWER MAX AC vs MSI Z97 GAMING 9 AC
I can't decide which motherboard to purchase.
MSI Z97 MPOWER MAX AC = 20 Phase, 1x Intel I218-V Gigabit LAN controller
MSI Z97 GAMING 9 AC = 16 Phase, 1x Killer E2205 Gigabit LAN controller
I'll be gaming, and having a play with overclocking, which is the best do you reckon, they seem practically the same otherwise?
Which one would you choose?Cheers for the replies guys, I appreciate everyones opinions.
Been digging for some more info...
Quote from: Techpowerup | Posted: 6th May 2014
MSI Also Launches its Z97 Gaming Series / Z97 OC Series Motherboards
The Z97 MPower MAX AC is a notch below the Z97 XPower AC. It offers a milder 12-phase VRM to power the CPU, but one that draws power from a combination of 8-pin EPS and 4-pin CPU power connectors, and featuring a coolant channel through the VRM heatsinks. There's no PCIe bridge chip, but the board still offers three PCIe 3.0 x16 slots (x8/x4/x4 when all three are populated). Storage connectivity on this board includes eight SATA 6 Gb/s, and one M.2 slot. The rest of its connectivity includes ten USB 3.0 ports, 802.11 ac WLAN, Bluetooth 4.0, gigabit Ethernet, and AudioBoost audio with headphones amp and ground-layer isolation. The Z97 MPower MAX is the most "affordable" of the lot, at under $200. Its feature-set is more or less identical to that of the Z97 MPower MAX AC, except it lacks 802.11 ac WLAN, Bluetooth 4.0, liquid-cooled VRM heatsinks, and onboard OC fine-tuning buttons.
The Z97 Gaming 9 draws power from a combination of 24-pin ATX, 8-pin EPS connectors, and uses a 16-phase VRM to condition power for the CPU, which is wired to four DDR3 DIMM slots, and three PCI-Express 3.0 x16 slots (x8/x4/x4 when all three are populated, x8/x8/x0 when two are, and x16/x0/x0 when one is. 3-way SLI and CrossFire are supported. An EMI shield covers the rear-panel I/O, while another shields the entire onboard audio circuitry, and the NICs. Audio is care of a 100+ dBA SNR DAC, which an external headphone amp circuit, ground-layer isolation, audio-grade capacitors, and EMI shielding. Wired connectivity is handled by Broadcom's newer Killer E2205 gigabit NIC. Wireless connectivity is handled by an Intel-made chipset that offers 802.11 ac WLAN, and Bluetooth 4.0 connectivity. Storage connectivity is devoid of SATA-Express, but features eight SATA 6 Gb/s, and an M.2 slot. Overclocking features include voltage measurement points, and POST LED display. Expect this one to go for over US $200.
The Z97 Gaming 7 and Z97 Gaming GD65 are two different beasts, although they're in the same price bracket (around $180). The Gaming 7 features an all-PCIe expansion area with modern M.2 slot, while the GD65 features dated mSATA 6 Gb/s. The rest of their feature-sets are identical, even if their PCBs are not. You get a 12-phase CPU VRM, three PCI-Express 3.0 x16 slots (x8/x4/x4 when all are populated), eight SATA 6 Gb/s ports, AudioBoost audio, and Killer E2200 NIC. The story repeats itself with the Z97 Gaming 5 and Z97-G45 Gaming.
Barring the milder 8-phase CPU VRM, both are similar in features to the more expensive Gaming 7 and GD65, with the exception of two fewer SATA 6 Gb/s ports. At the entry level are the Z97 Gaming 3 and Z97-G43 Gaming. The two are designed for gaming builds with no more than two graphics cards, and offer some legacy PCI slots. The two offer AudioBoost and Killer E2200, but skimp out on the CPU VRM, featuring just a 6-phase one. Storage connectivity is consistent with those of the Gaming 5 and G45.
Source / Source
£199.99 - MSI Z97 Gaming 9 AC (Amazon UK)
£168.20 - MSI Z97 MPOWER MAX AC (Amazon UK)
£129.53 - MSI Z97 Gaming 7 (Amazon UK)
£124.99 - MSI Z97 MPOWER - (Amazon UK)
£123.86 - MSI Z97-GD65 (Amazon UK) -
MSI Z97 Gaming 9 + MSI GTX 770 TF 0c + Logitech F710
My PC spec
MSI Z97 Gaming 9 AC
MSI GTX 770 TF 2GD5 OC
RAM Corsair Dominator platinum CMD8GX3M2A1600C8
SSD Samsung 250GB EVO
2 HDD WD Blue 1TB + 1 HDD WD Black 1TB
PSU Seasonic 760w Platinum
Gamepad Logitech F710
Monitor LG D2343P 3D
================================
i try Flashing Bios with 1.1 1.2 1.3 1.4
My Logitech Gamepad F710 on this mobo is not working as it should.
I play fifa 14, and my gamepad, the response was very poor. as analog becomes very hard, and passing the ball in play fifa 14 is very difficult. I compare my gamepad used in asus P8Z68 deluxe.
I use windows 8.1 proThat is most certainly a hardware clash.
Is there any Logitech firmware update or software?
If it remains sluggish or unresponsive then I would contact both Logitech and MSI technical to attend to it to see if there is either a firmware update or BIOS update that can be done to resolve the matter. -
MSI Z97 Gaming 7 - USB Device Over Current
Hi everyone,
I just made my first gaming PC, using an MSI Z97 Gaming 7. Everything went well, all the wires are connected correctly, but when I boot the PC, and try the setup (by typing the F1 button), this message appears:
USB device over current status detected
and the PC shuts down after 15 seconds.
I tried to unplug the USBs ports of the Case, tried to unplug the battery for 15 seconds, tried to boot again but the problem was still there. I also inspected all the USB ports, and I don't see anything strange.
Is it possible that the mainboard is faulty? Is there anything I can do about it?
These are the specs, if they are usefull:
MSI Z97 Gaming 7
Intel i5-4460 @3.20
Gigabyte GTX 970
PSU XFX 650W XXX Edition
RAM 8GB HyperX Predator
1TB WD Black
256GB HyperX SSD
CM Hyper T4
I hope someone can help mesounds like something is shorted,
USB ports damaged?
have you tried rear USB ports and different USB ports?
Quote
I tried to unplug the USBs ports of the Case, tried to unplug the battery for 15 seconds, tried to boot again but the problem was still there. I also inspected all the USB ports, and I don't see anything strange.
have you unpluged mouse and keyboard too? assume they are USB one too
else take out mainboard out of PC case and place it over non conductive surface, like wooden table
then retest
and do you have a different PSU to try too?
Maybe you are looking for
-
Error while running the struts page
Hi , I am trying to access a jsp page written with struts. I am using tomcat4.0.1.My jsp page is in <webapps/strutsapp1/>directory where strutsapp1 is my web application. When i go to that page like - http://localhost:8080/strutsapp1/index.jsp i get
-
Misled about free 1GB promotion, not a happy camper
VZ: Back in early September when the iPhone pre-registration opened, I wanted to take advantage of both the 1) iPhone trade-in program (for the 6/6 plus) as well as the 2) free 1GB promotion for each new smartphone purchased, and so I switched over t
-
Displaying .shp file in a JSP page
hi all, For my application i have to display a map. That one is a .shp file. And it is not a stored one in my system.In that map i have to show a car moving at that particular time, so it will we keep on changing and that one i have to get it from ot
-
EXTERNAL OPTICAL DRIVES FOR G5
I have an internal optical drive failure. Would like to purchase an external drive. Any suggestions on brand??
-
Dear All, The pre requisite checker run for SAP ECC6 installation on Solaris 10/Oracle using zones gives following errors: 1) Environment variable CPIC_MAX_CONV should be set and the value should be at least 200 I've done this on windows. Used "set e