MSI Z97 Gaming 7: Soundblaster Cinema Software, Disable Splash-Screen?

Hi there,
is it possible to disable the splash Screen of the Soundblaster Cinema Software? Its really annoying on Windows Startup.
I've already checked the Options in the Software but didnt find a Thing to disable it.
Thanks in advance

MSconfig is not necessary, you can just tell it not to start with windows.
Obviously avoiding the software avoids the splash screen but it's not a real solution.

Similar Messages

Z97-Gaming 5 Soundblaster cinema 2 Issue

Hello everyone, this is my first htpc build and I ran into a software problem and hope someone here can help.
Hardware:
Intel i7-4970k
16gb crucial 1600
Samsung 250gb
So basically I have a monitor and flat screen connected to the pc. I have two standard speakers connected to the rear audio jack when using the monitor. The flat screen is connected to an Onkyo receiver that has an hdmi coming from the motherboard pc. My issue is with Soundblaster cinema 2 only recognizing the speakers connected to the rear audio jack. I want to use the on board sound card for 5.1 audio and not the windows default HD audio. In sbc2 when choosing change default audio device I get two options - speakers(Realtek audio) & windows default. When testing SBC for audio out of the receiver not works except the windows HD audio. After doing some research before writing on this forum I tried re-installing SBC2 and Realtek driver with no change. Can someone please give me some advise on how to fix this issue.
Thank you

So..you connect the Onkyo to the mobo using HDMI cable, and what cable do you use from Onkyo to the flat screen?
If both are HDMI then I think it should be fine:
You should make sure your Onkyo is right set as HDMI mode, Motherboard on board HDMI port---->Onkyo HDMI in--->another HDMI out from Onkyo---->TV
Remember to restart the system before you can use, then you can see your TV device under Playback, configure the device then select 5.1.

MSI Z97 gaming 9 AC Cmedia audio.

hello i have problem with cmedia audio (i like use cmedia for my headset, beautiful sound )
but cmedia make big latecny.
is felt when I played the game FIFA 15.
then I disable c media from the device manager.
and I use Realtek, but not as good as c media voice.
=====================
i7 4790k
MSI Z97 Gaming 9 AC bios 1.7
corsair 2x4GB cl8
ASUS GTX 780 TI DC 2 OC
windows 8.1

Does this happen only when playing FIFA 15?
Do you have Sound Blaster Cinema installed?
I'm sure you can find a software called "Xear....(sor I forgot)" in your computer if you had installed the cmedia driver. And there's a button shows ASIO, then you can switch audio bit depth there, can try that switch to 16 and see what happens next.

MSI Z97 GAMING 3 Review--Performance Testing

After the previous hardware and software introduction, I believe Z97 GAMING 3 will meet gamers’ expectation.
Z97 GAMING 3 integrated with Killer E2200 LAN, Audio Boost 2, M.2 interface and the normal array of connections,
It is truly a good gaming motherboard. Could all these features offer great performance and a good experience?
Today I will test the performance of Z97 GAMING 3 and how good it is.
MSI Z97 GAMING 3 Testing
My test platform is MSI Z97 GAMING 3, Intel ® Core i7-4770K and MSI GeForce GTX 750 graphics card. The test
consists of two parts:
CPU Performance: Super PI, PC Mark Vantage and Cinebench R11.5.
GAMING Performance: 3DMARK 11, Evil 6 Benchmark and FFXI Benchmark.
Test Part 1
CPU : Intel Core i7-4770K @ 3.5 GHz
CPU Cooler : Thermaltake TT-8085A
Motherboard : MSI Z97 GAMING 3
RAM : Corsair DDR 3-1600 4GB X 2
PSU : Cooler Master 350W
OS : Windows 7 64 bit
Basic performance testing (CPU setting by default)
CPU Mark Score : 679.
Super PI 32M Result – 8m53.897s.
Graphics Performance Testing：3DMark 11
3DMark 11 is designed to measure PC’s performance. It makes extensive use of all the new features in DirectX 11
including Tessellation, Compute Shader and Multi-threading.
Intel ® HD4600 iGPU in 3DMark 11 Basic mode testing, the results is X385 Score.
Performance mode test score is P1511 .
System Performance：PCMark Vantage
PCMark Vantage is a PC analysis and benchmarking tool consisting of a mix of applications such as based and
synthetic tests that measure system performance.
From the test results, the score of Z97 GAMING 3 with Intel ® HD4600 iGPU is 11,946.
MSI GeForce GTX 750 Testing
Test Part 2
CPU : Intel Core i7-4770K @ 3.5 GHz
CPU Cooler : Thermaltake TT-8085A
Motherboard : MSI Z97 GAMING 3
Graphics Card：MSI GeForce GTX 750
RAM : Corsair DDR 3-1600 4GB X 2
PSU : Cooler Master 350W
OS : Windows 7 64 bit
Graphics Performance Testing：3DMark 11
Z97 GAMING 3 with GeForce GTX 750 the test scores is X1653 in 3DMark 11 basic test mode, The performance
mode test score is P5078.
System Performance：PC Mark Vantage
From the test results, Z97 GAMING 3 with GeForce GTX 750 scores 11,518.
System Performance：Cinebench R11.5
Cinebench is the software developed by MAXON Cinema 4D. Cinebench could test CPU and GPU performance with
different processes at the same time. For the CPU part, Cinebench test the CPU performance by displaying a HD 3D
scene. For the GPU part, Cinebench test GPU performance based on OpenGL capacity.
Main Processor Performance (CPU) - The test scenario uses all of your system's processing power to render a photorealistic
3D scene. Graphics Card Performance (OpenGL) - This procedure uses a complex 3D scene depicting a car chase which
measures the performance of your graphics card in OpenGL mode.
In Cinebench R11.5 test, MSI Z97 GAMING 3 with GeForce GTX 750 multi-core test is 6.87pts; OpenGL score is 73.48 fps.
Z97 GAMING 3 with HD 4600 and GeForce GTX 750 in the GAME Benchmark Test
For game performance testing, I will use Resident Evil 6 and FFXI Benchmark with the same platform.
Evil 6 Benchmark
CPU: Core i7-4770K
Game resolution setting: 1920X1080
Other setting: Default
In the Z97 GAMING 3 with Intel® HD4600 iGPU platform, score:1175 (Rank D)
In the Z97 GAMING 3 with GeForce GTX 750 platform, score: 5874 (Rank A)
I use Fraps tool to record FPS status during benchmark testing.The Z97 GAMING 3 with GeForce GTX 750 average
FPS is 202. The Z97 GAMING 3 with Intel® HD4600 iGPU average FPS is 32.
FFXIV Benchmark
CPU: Core i7-4770K
Game resolution setting: 1920X1080
Other setting: Default
The 1920X1080 resolution, Intel® HD4600 iGPU score is only 910.
However, the GeForce GTX 750 testing score is 4167. According to the official classification system, the score
between 3000 to 4499 means high performance.
I use Fraps tool to recorded FPS status during benchmark testing.
the GeForce GTX 750 average FPS is 111. Intel® HD4600 iGPU average FPS is 19.
Test Summary
MSI Z97 GAMING 3 is not very expensive. It has many features which are specially designed for gaming experience
and good performance of benchmarks. Even in 1920x1200 resolution and high quality display setting, Z97 GAMING 3
with Intel Core i7-4770K and MSI GeForce GTX 750 can easily handle any kind of games. The FPS of this system is
higher than 60 and users will enjoy no lag as gaming. It is really a good and afforadable chioce for gamers.

Thx for the sharing, since there are not much reviews about Z97 GAMING 3.

MSI GTX980 Gaming sometimes not recognized by MSI Z97 Gaming 9 AC

I have been experiencing a very odd problem with my new hardware.
Hardware
Motherboard: MSI Z97 Gaming 9 AC
CPU: Intel Core i7-4790
CPU-cooler: Scythe Mugen 4
RAM: G.Skill RipjawsZ F3-17000CL9Q-16GBZH
Videocard: MSI GeForce GTX 980 4GB GAMING 4G
PSU: Seasonic X-660 80+ Gold
SSD: Crucial M550 2,5" 1TB
Monitor#1: LG 34UM95-P
Monitor #2: Eizo Foris FG2421
OS: Windows 7 Professional
Issue description
The thing is that with 2 monitors connected the videocard is not recognized on a cold boot, but boots perfectly most of the time after a restart. In some cases a restart doesn't do the trick. I have even seen a couple of times that the monitor shows that windows starts and then the monitor loses the signal from the videocard before I can see the desktop (rare). With just 1 monitor attached the videocard is recognized. Als the IGP works fine, it's just the videocard that doesn't seem to be recognized when 2 monitors are connected (all combinations of DP, HDMI and DVI). When the computer has booted after one or more restarts and the videocard is recognized the computer works flawlessly, no problems whatever I do with it (desktop work, stressing hardware, playing games, etc.). Not a single sign of instability.
It's just the cold boot and sometimes the soft boot or restart that causes the videocard to not being recognized with 2 monitors connected.
What makes it really weird to me is that when the computer goes into sleep mode I can wake it up normally within say 10 minutes. But if I wait for let's say an hour the videocard is not transmitting a signal through the videocard.
When IGP is enabled the computer boots and windows loads normally (I hear the sound of the Windows login), although the monitors stay black when connected to the videocard. Then switching the connectors from the videocard to the motherboard shows me a normal Windows login screen, but the videocard is not visible in the device list. When the IGP is disabled to bootup sequence just hangs until a restart works and the computer boots normally with the videocard getting recognized and working properly.
Click sounds
I noticed the motherboard makes 4 click sounds when booting, like relays flipping. I think it has to to with distributing power to al the components, since it looks like components respond to the click by turning led lights on. But I have to say I've never come across a motherboard before that makes click sounds. Is this normal?
Tried fixes
- Replaced the RAM with 100% working RAM from my other computer (Corsair Vengeance LP CML8GX3M2A1600C9) -> problem persists
- Disabed XMP -> problem persists
- Replaced the PSU with another one (Cooler Master V550 Semi-Modular) -> problem persists
- Reinstalled the videocard physically -> problem persists
- Tried several combinations of connecting the 2 monitors to the videocard (all DP ports, HDMI and DVI) -> problem persists
- Replaced the videocard with a MSI GTX970 Gaming (connected with 1xDP and 1xHDMI) -> problem persists
Conclusions so far
The cause can be found in the videocard or motherboard (probably BIOS issue).
Who can shed some light on this issue?

Quote from: JLio01 on 14-November-14, 17:02:39
Try all PCIE slots no luck? Does the black screen always happen on one certain monitor or both?
I tried both the first and the second PCIe slot. No difference except for the fact that in the second slot the card only works at x8 bandwidth.
Quote from: jotan.va on 24-November-14, 18:05:51
BTW - Did anybody try to remove the wifi module from the board and then test?
I didn't install the wifi module in the first place.
UPDATE
I returned the motherboard to the webshop I bought it from and sent my cpu, ram, psu and videocard (GTX980) with it so they could test it. They found out that the videocard is the problem. So now I have to send the videocard to the webshop it bought that from. However, I am suspecting that it's just a VBIOS problem and not some fault in the hardware itself. On the other hand, it would be very strange that MSI would release a videocard that cannot work with one of their own top motherboards, wouldn't it?

MOVED: MSI Z97 Gaming 5 and Intel Core i7 4790K

This topic has been moved to GAMING Motherboards.
https://forum-en.msi.com/index.php?topic=181378.0

Quote from: AranelSurion on 03-July-14, 22:02:56
Speancer, what was the BIOS version yours shipped with?
I got a GAMING 5, according to MSI Support it's V1.0, since I don't have a spare LGA1150 chip I'm really curious if 4790K is going to work as it is. My build is from entirely new parts, so if somehow it fails to POST, I can't know for sure if it's because of the outdated BIOS or something else, It would be great to know if it's actually going to work or not on 1.0 .
Anybody tried 4790K with 1.0 BIOS? Does it work?
It was 1.0 Like I said, it works perfectly ouf of the box on MSI Z97 Gaming 5 with i7 4790K CPU. After installing system and most of my softwares like it was before format, I noticed that I could not enter BIOS, but system was working normally. Then I flashed BIOS from 1.0 to 1.3 in Windows and it worked again and has been working ever since.
Good luck with your new rig

Overclocking DRAM on MSI Z97 Gaming 5

Hello again
Since I am pretty new to overclocking, I'm having some fun adjusting clocks of my hardwares, this time my Kingston HyperX modules which were reviewed as having a good OC capability. I performed some tests using AIDA64 Extreme software: memory read, memory write and memory waiting time. I tested stock 1866 MHz frequency and then I overclocked it to 2400 MHz. Here are my results:
Kingston HyperX 2x4GB 1866 MHz 10-11-10-30-1T
Memory read: 26.981 MB/s, 26.994 MB/s, 26.966 MB/s
Memory write: 27.234 MB/s, 27.270 MB/s, 27.346 MB/s
Waiting time: 52.9 ns, 53.1 ns, 52.6 ns
Kingston HyperX 2x4GB 2400 MHz 13-15-13-39-2T
Memory read: 32.800 MB/s, 32.899 MB/s, 33.127 MB/s
Memory write: 33.778 MB/s, 34.439 MB/s, 34.124 MB/s
Waiting time: 51.3 ns, 52.0 ns, 51.1 ns
Seems like adjusting memory clock to 2400 MHz frequency indeed improved memory's read, write and waiting times. Voltage increased from 1.5V to 1.68V.
I also tried with 2600 MHz, but the results in AIDA64 were worse then on 2400 MHz and even worse then on 1866 MHz.
-According to this, I believe 2400 MHz memory frequency is a maximum that my kits can be pushed, if higher frequency caused performance drop? Perhaps I could adjust higher voltage manually? Motherboard changed timings and voltages automatically.
-Are these results good? I have never overclocked memory before.
-I guess even though results show higher values of reads and writes, there won't be any difference I can actually feel?
-And last question: how do I check if memory runs stable on adjusted frequency?
MSI Z97 Gaming 5 makes DRAM overclocking totally easy as it seems!
Thanks in advance

I can see the description of my RAMs, on the package, it says 1866 MHz, it already was 1866 MHz out of the box when I firstly plugged them.
Otherwise there wouldn't be 1333/1600/1866 MHz variants right?
Anyway, is that a good overclock?

MSI Z97 Gaming 9 + MSI GTX 770 TF 0c + Logitech F710

My PC spec
MSI Z97 Gaming 9 AC
MSI GTX 770 TF 2GD5 OC
RAM Corsair Dominator platinum CMD8GX3M2A1600C8
SSD Samsung 250GB EVO
2 HDD WD Blue 1TB + 1 HDD WD Black 1TB
PSU Seasonic 760w Platinum
Gamepad Logitech F710
Monitor LG D2343P 3D
================================
i try Flashing Bios with 1.1 1.2 1.3 1.4
My Logitech Gamepad F710 on this mobo is not working as it should.
I play fifa 14, and my gamepad, the response was very poor. as analog becomes very hard, and passing the ball in play fifa 14 is very difficult. I compare my gamepad used in asus P8Z68 deluxe.
I use windows 8.1 pro

That is most certainly a hardware clash.
Is there any Logitech firmware update or software?
If it remains sluggish or unresponsive then I would contact both Logitech and MSI technical to attend to it to see if there is either a firmware update or BIOS update that can be done to resolve the matter.

New MSI Z97 Gaming 7 and 4690K Overclocking

I have finally received my MSI Z97 Gaming 7 and 4690k earlier this week.
When I did the overclock Genie it took me up to 3.9mhz but believe this can be easily overclocked higher manually. I am fairly new to overclocking. However, can't seem to find the ability to manually overclock this in the BIOS.
Any ideas where/how to do this or if there is an online guide. Also has a Noctua NH-D14 cooling the CPU.

First of all you disable OC Genie, it is useless for people that want MORE oc than it gives you.
Here is forum's OC guide:
https://forum-en.msi.com/index.php?topic=40413.0
And other forum's OC guide:
http://www.neoseeker.com/Articles/Hardware/Guides/OCguide/
I don't overclock (see my spec) so I can't provide you with more details but can guide you to a good link

Msi z97 gaming 5 bios update help

Hello I recently purchased the msi z97 gaming 5 motherboard. It was working fine it came with bios version 1.0 and I wanted to update it. I downloaded the latest 1.5 bios from msi website copied to usb flash drive and flashed it using mflash. Computer powers on but black screen wont do nothing. I cleared cmos and battery and still nothing so I am pretty sure its bricked. I am going to store to exchange it for another one but I want to be able to safely update the bios without bricking again. I usually dont update bios unless needed but i need at least 1.2 bios to fully support the devils canyon cpu. Can someone please point me in the right direction? I read about the usb flashing tool in forum but also read that bios+me need to be flashed and I don't know if that program is up to date and will flash both files? I really appreciate it if someone helped thanks in advance.

Also does anyone know if it is dangerous to update the bios with a 4690k devils canyon cpu since it is not officially supported until 1.2? Is that why my first bios flash was bricked? I would hate to go and borrow another cpu just to update the bios but if I have to I will. Sorry for all the questions but I need to get my bios updated and I will not update it until I am sure of all these things. Thanks to anyone who answers these questions.

Crash by gaming with MSI z97 Gaming 9 AC/ MSI 980GTX

Dear MSI Form
The last couple of weeks I have a very bad crash,
This is my system:
Windows 8.1 64
Mother board: MSI Z97 Gaming 9 AC
GPU: MSI GTX 980
CPU: Intel core i7 4790K 4 GHz
CPU Cooler: Cooler Master Nepton 240M
Memory: 16GB 4x4 Corsair vengeance pro
Hard disk: 2 X 1TB 1 X 1TB SSD
Power supply: Be quiet! Power Zone 650W
Case: Cooler Master CM Storm Trooper Window
Fans: 9X Be quiet! Shadow wings + Fan controller
I use my pc mostly for gaming,
I bought en build my pc on September 2015 but now and then I get a very bad crash, the crash shuts down my pc (no blue screen / no Error) just a black screen with a pc that won’t respond on anything. The lights are on at my motherboard cpu cooler and GPU, but no respond. To turn my pc on again I have to shut down the main power switch. After 10 seconds I can start up my pc again.
I get the following windows event: id 41 kernel power
Scenario:
This began when I played Dragon age 3 in December, I got the crash twice in like 100 hours. (not a big deal) than I got the same crash once when I played GTA V with 60 hours more or less. But now when I playing the Witcher 3 wild hunt I get it every 5 minutes.
What did I try to fix it but won’t work:
- Memtest run x10 no error
- Drivers up to date
- The temps under full load are great CPU they won’t go over 51 degrease / GPU 68 degrees / the rest won’t go over 45 degrees.
- I got no virus.
- Everything is connected just fine.
I hope you guys can help me out.
Kind regards,
Tijs Dragtsma from the Netherlands

May be your PSU being too weak or going bad (I doubt though). Although you have 9 fans.. maybe try disconnecting case fans and leave only CPU cooler ones to work?

MSI Z97 Gaming 9 AC - Intel Wireless AC 7260 module don't work

Hi,
Please help me, i started my new rig and the wi-fi module (that hard to fit in the mobo) don't even appear in device manager.
I already tried to dismount and remount the module on the motherboard with extreme care, no success.
Here is my rig:
Main Board: MSI Z97 Gaming 9 AC
Bios Version: 1.4
Video Card: R9 290X
Memory: 16 Gb Corsair Vengeance 2400Mhz
Processor Intel 4790K
OC: Not yet
Operating System: Windows 8.1 Pro 64
Please help me

Recheck your WiFi Bluetooth expansion module connection on the board.
Recheck your MB mounting in the case, i.e. errant standoffs. Perhaps test the board outside the case on a non conductive surface to ensure no potential short exists. Then retest with the WiFi plugged in.

DIMM 1/2 stopped working on MSI Z97 Gaming 5, help!

Hello again!
Today I was trying out a different cooler for my i7 4790K, I mounted it and everything worked fine, but results were bad, so I decided to mount previous cooler again...
And here were the problem starts. After I mounted everything back (exactly following guide like before, thermal paste etc all done) my PC would not start the system nor BIOS.
I wondered what could cause it, so just to check a possibility, I unplugged one RAM module from DIMM 2 (they used to work in dual-channel at 2/4 DIMMs) and it suddenly started BIOS and system up normally.
Following this tip, I unmounted cooler's fan, because it covers DIMM 1 to check if it would work, and doesn't matter what memory I plug in DIMM 1 or 2, it won't work Doesn't work with any combination, so I can't actually use dual-channel right now, as only DIMM 3 and 4 work at the moment (both or alone). Any module plugged in 1/2 slots doesn't work.
All I see is that temperature monitor on my MSI Z97 Gaming 5 shows 10-55, 10-55 all the time, jumpy temps, everything works, but nothing loads. Just black screen, nothing. I work with 3/4 slots in single channel right now.
What the hell could happen? Please help me with this!
Edit: Is that possible I could move a CPU from a proper pin so it doesn't connect properly with DIMM 1 and 2? My cooler moved a bit before I mounted it properly. That's only thing that comes to my mind right now.

Quote
EXTENT OF LIMITED WARRANTY
Intel does not warrant that the Product will be free from design defects or errors known as “errata.” Current characterized errata are
available upon request. Further, this Limited Warranty does NOT cover:
any costs associated with the repair or replacement of the Product including labor, installation or other costs incurred by you, and in
particular, any costs relating to the removal or replacement of any Product that is soldered or otherwise permanently affixed to any
printed circuit board;
OR
damage to the Product due to external causes, including accident, problems with electrical power, abnormal electrical, mechanical or
environmental conditions, usage not in accordance with product instructions, misuse, neglect, alteration, repair, improper installation, or
improper testing;
OR
any Product which has been modified or operated outside of Intel’s publicly available specifications or where the original identification
markings (trademark or serial number) has been removed, altered or obliterated from the Product.
http://download.intel.com/support/processors/sb/warranty_procts_english.pdf
So if you have bent the pins and didn't buy the "care package" or whatever they call for improved warranty, then I believe that it is void. But read whole PDF carefully.
I might be wrong, I'm just a human. Contact Intel about this:
http://www.intel.com/p/en_US/support/warranty

MSI Z97 Gaming 7 PWM Fan setting question

Hello, right now I'm using Z87 motherboard from others vendor (as***k), and now I want to change my motherboard to MSI Z97 Gaming 7. But there's something that I want to ask first. When I'm using still using Z77 motherboard which is MSI Z77A-G45, I can set the PWM fan to change it speed automatically by change the CPU fan to auto in the UEFI. But in the Z87 I currently use I have to customize it in the UEFI, so that my PWM CPU fan change its speed as the CPU temperature changes, it can't be set to auto and I don't like it at all. Now that I want to change my motherboard to MSI Z97 Gaming 7, I'm searching the review first. And I'm seeing that it have similar fan setting with the Z87 motherboard that I currently use
I want to ask, is it possible that I can set the CPU fan setting to auto just like the Z77A-G45 I used to have?

Quote from: Abula on 19-May-14, 08:22:10
What you are seeing is mulitple breakpoints of temperature, as you do on your AsRock.
I own a Z87GD65, and in mine i only have 1 true breakpoints, which is the temperature in which you want the fans to speed up, according to the temperature of the cpu. I als did a build for a friend on a Z77GD43 and it was similar just didnt had the graph, as it has on the Z87GD65 nor the new one that you posted on the Z97 Gaming7, but what i see is more customization on the new motherboard, with 4 different breaking points, i see the same restrictions on the PWM %, increments of 12.5% as it is on my GD65, weather its worth it, personally i dont care, one is good enough for me, i usually just spin down my fans to the lowest i can, and set the breakpoints for the temperature i want my fans to spin up, if the temperature is reach they will increase gradually, defined by the max PWM % and max temperature, this two variables (that you can change) will make the graph with more or less inclination. In the new Z97 Gaming 7, seems the same just multiple breakpoints, meaning you can have different inclinations into how the fans react depending on the temperature, weather its worth it or not.... depends on the level of customization you want to the fan control, personally im fine with a single, but i can see people that could like having depending on their needs, personally what i would have loved though, is to give me 10% increments instead of 12.5%, or 5% would been better, but 12.5% just seems odd number imo.
Remember, MSI only has 2 true PWM fan headers, CPU_FAN1 and CPU_FAN2, even though all are 4pin physically the SYS_FAN are not true pwm fan headers, they are voltage controlled and have much higher restrictions than the real PWM fan headers. And remember that if you plug 3pin fans on PWM fan headers they will spin at 12V that its the voltage that its handled by PWM fans, so be careful what fan you plug into where to have control on them.
Hmn, so since Z87 MSI use that breakpoint system to control PWM fan, just like my asrock Z87. So there's no auto setting on your Z87GD65?

Microphone issue with MSI Z97 GAMING 5

Hi there!.
I have just set up my new computer and i have problems with my microphone. My mainboard is a "MSI Z97 GAMING 5" and my box: NOX Coolbay SX.
I have installed the drivers from disk and tryed also searching drivers on the web of MSI. I can hear with my speakers with no problems, same with my headset. But there is no way to use my microphone. I put it in the front panel, then i checked the control panel - sound and Windows tell me that the microphone is connected, but dont work. if i put it in the back panel, the realtek HD administrator tell me that something is connected in the microphone slot but WIndows dont detect it.
in the BIOS, the HD Audio is ENABLED. I dont have any idea about what to do now. I have search on this forum but i havent seen this same issue. Can you help me?
Thanks and sorry about my english.

ill post my specifications
Board: MSI Z97 GAMING 5
Bios: Version 1.0
VGA: MSI GeForce GTX 760 Twin Frozr OC 2GB GDDR5
PSU: Nox Urano VX 750W PFC
Intel Core i5-4670K 3.4Ghz Box 1150
MEM: G.Skill Ripjaws X DDR3 1600 PC3-12800 8GB 2x4GB CL9
HDD: Seagate Barracuda 7200.14 1TB SATA3
COOLER: Katana 4
OS: Windows 7 64bit Professional

MSI Z97 Gaming 7: Soundblaster Cinema Software, Disable Splash-Screen?

Similar Messages

Maybe you are looking for