MSIDVBT.EXE Application Error Help plz

Today I bought a Digiitalanywhere Digital TV Card, Fm Stereo with mini Digital Antenna.
DVB-T-PCI
Part No.G57-Cb00799-f45
Digital@nywhere(912-8623-002)
Digital @nywhere DVB-t Tuner,Fm,4 in 1 Av Cble, Remote Control Antenna
I installed it then used the drivers on the disc supplied
I launched the MSI/DigitalAnywhere tool
When I hit the t.v. or video it comes up with a message box
MSIDVBT.EXE Application Error
Stating:
The Instruction at "0x77f52a84" referenced memory at "0x00104001".The memory could not be "written"
Click on OK to terminate the program
Click on CANCEL to debug the program
Well after that, Lovely surprise!
I came here,
Downloaded the drivers,
Downloaded the application
Downloaded the patch
Uninstalled all drivers via Device Manager
Uninstalled software
reset comp
installed all the downloaded stuff
And hey presto the same Message box appeared
MSIDVBT.EXE Application Error
Which also states
The Instruction at "0x77f52a84" referenced memory at "0x00104001".The memory could not be "written"
Click on OK to terminate the program
Click on CANCEL to debug the program
I have repeated the uninstall many times today! and am lost!
I'm thinking about returning it for another make!
so please reply promptly thanx!
My system
3.2 pentium
2 gig DDR2 533mhz ram Chips
2 x 6600 nvidia 256
A bit motherboard NI8 Sli <- lots of cool board lights )!
Sound blaster audigy plat.
Armor case black!
Phillips 19s inch monitor 8 ms Black!
2 X 80 gig harddrives
Xp Pro

Please read and comply with the Forum Rules.
this is a user-to-user forum, no-one from MSI visits here. if you want to contact MSI tech support direct, look here: How to contact MSI.
this forum isn't very busy normally, so its not unusual to get no replies in the 40 minutes between your first post and your second
secondly, there haven't been many postings about the Digital@nywhere card, so either no-one knows much about them, or they are such good cards that no-one has needed to come here for help yet
some suggestions to try, have you tried the card in another PCI slot?
also, i notice your board is a SLI type, with PCI-Express. look at glenns comments in the "TheaterPRO install issues" sticky about lack of resources on PCI-e mobos
finally, if you do go for a competitors brand, i suggest you get an Asus - their forum is very lively and helpful

Similar Messages

Crw32.exe Application Error - Help!

Hi there, i keep getting errors (and crystal then shutsdown) when i try and run certain reports or drag fields onto my report............i at first thought my machine was faulty and have recently since got new motherboard. have format and re-installed - still getting the error you can see screen capture of full error here: <a href="http://img165.imagevenue.com/img.php?image=39445_crystal_error_122_599lo.JPG">http://img165.imagevenue.com/img.php?image=39445_crystal_error_122_599lo.JPG</a> Spec: Win XP Crystal XI SP 2 Fujitsu Siemens Amilo Pro Centrino 2.0 mhz 1gb ram Nvidia GeForce 2 256mbGraphics Any help you can give would be great, Many thanks, Neil 

I have been having a similar problem in a few reports. From what I can tell the problem is caused by a combination of dynamically supressing blank report sections based on lack of data and having "page n of m" in the page footer. It seems like the report designer can't figure out the page count on preview and crystal dies. I took the page n of m out of the report and the behavior seems to have stopped.
When I schedule the report to run in crystal enterprise and then view the report using the DHTML viewer, I do not have any problems. My solution for now is to take out the page n of m from the footer until the report is published to production.
Anyone else have any thoughts?

Iexplore.exe - Application Error. Help!!

This in one of those things that can drive you nuts. All was well, however recently when trying to use BBC iplayer. I was prompted to install Flash Player. Which was there a few days before and working perfectly. Now when I try to start the download I get a box with the following message.
iexplore.exe - Application Error
The installation of "0x10420068" referenced memory at "0x10420068". The memory could not be "written".
Can anyone help. Please

Try the offline ActiveX installer http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe; save it to disk, close all browser windows, then run the downloaded installer.

HELP: "nsAppShell:EventWindow: firefox.exe - Application Error The instruction at 0x0770e1b0 referenced memory at 0x0770e1b0. The memory could not be written."

Whenever I close Firefox, I get this error message: "nsAppShell:EventWindow: firefox.exe - Application Error The instruction at 0x0770e1b0 referenced memory at 0x0770e1b0. The memory could not be written."
Help - How to get rid of this message/error?

In order to be able to find the correct solution to your problem, we require some more non-personal information from you. Please do the following:
*Click the Firefox button at the top left, then click the ''Help'' menu and select ''Troubleshooting Information'' from the submenu. If you don't have a Firefox button, click the Help menu at the top and select ''Troubleshooting Information'' from the menu.
Now, a new tab containing your troubleshooting information should open.
*At the top of the page, you should see a button that says "Copy text to clipboard". Click it.
*Now, go back to your forum post and click inside the reply box. Press Ctrl+V to paste all the information you copied into the forum post.
If you need further information about the Troubleshooting information page, please read the article [[Use the Troubleshooting Information page to help fix Firefox issues]].
Thanks in advance for your help!

WINWORD.EXE -Application Error The application was unable to start correctly (0xc0000142). Click ok to close the application

HI
when i am trying to open MSWord following message pop up and i can't open MSword any more:
WINWORD.EXE -Application Error The application was unable to start correctly (0xc0000142). Click ok to close the application.
Please advise

Hi,
Does Word start in Safe Mode?
Press Win key + R, type "winword.exe /safe" in the blank box, press Enter.
If Word can start in Safe Mode, the issue should be related to 3rd-party add-ins, disable the suspicious add-ins to determine which one caused the problem.
You can also try repairing Office from Control Panel -> Programs and Features, check if this helps.
Regards,
Melon Chen
TechNet Community Support

Win7 /Office Updates April 2015 - userinit.exe - Application Error : The application was unable to start correctly (0xc0000018)

Hi all,
After updating our acceptence Windows 7 SP1 clients (april updates). We are unable to login the machine.
Error: userinit.exe - Application Error : The application was unable to start correctly (0xc0000018)
After rebooting the machine 2times I'm able to login. When I shutdown the machine at the next boot i'm getting the same error again and i'm not able to logon.
I have no idea where to start. One by one uninstalling updates isn't an option because after a reboot it seems ok.
Any idea's? Help is welcome.
The installed updates:
1. Update (Missing): Update for Microsoft OneDrive for Business (KB2956185) 32-Bit Edition (04e403da-693b-4b76-a7ff-7807aaa8e82b, 200) WUAHandler 15-4-2015 10:35:12 5068 (0x13CC)
2. Update (Missing): Update for Microsoft Access 2013 (KB2965276) 32-Bit Edition (1292d1c5-e57a-479c-827a-bd91d26995fc, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
3. Update (Missing): Update for Microsoft OneNote 2013 (KB2965264) 32-Bit Edition (161aacb2-973c-4042-8a08-2d7912f46e62, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
4. Update (Missing): Update for Microsoft Outlook 2013 (KB2965270) 32-Bit Edition (216a01f6-8209-42e2-aefc-95cadf8c95ee, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
5. Update (Missing): Update for Skype for Business 2015 (KB2889853) 32-Bit Edition (2510db79-26bb-447c-b2fb-687cb494b0d8, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
6. Update (Missing): Update for Microsoft Project 2013 (KB2965279) 32-Bit Edition (2c49d156-cea9-432f-82c4-3f6b48c8c0ca, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
7. Update (Missing): Update for Microsoft Office 2013 (KB2965262) 32-Bit Edition (40fe3b7e-3e2d-4c11-bf5e-3139196057e0, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
8. Update (Missing): Security Update for Microsoft Word 2013 (KB2965224) 32-Bit Edition (59d17ded-907b-4162-8121-f1ce0c47023c, 201) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
9. Update (Missing): Definition Update for Microsoft Office 2013 (KB2965273) 32-Bit Edition (5bd24951-9c92-42d7-a17a-6eaa4a918dca, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
10. Update (Missing): Update for Microsoft Office 2013 (KB2965218) 32-Bit Edition (5db38391-2220-412f-83ac-28366ac06dd6, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
11. Update (Missing): Update for Microsoft Office 2013 (KB2965267) 32-Bit Edition (6fb5843a-cb0d-4bcb-9be1-4feb3c740681, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
12. Update (Missing): Update for Microsoft Office 2013 (KB2965255) 32-Bit Edition (91fea44d-b1b2-43a3-a82f-b02e56d3d216, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
13. Update (Missing): Update for Microsoft Office 2013 (KB2965268) 32-Bit Edition (9dd67b4e-59e4-40b0-b5c8-7dcabd770d66, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
14. Update (Missing): Update for Microsoft Office 2013 (KB2825678) 32-Bit Edition (a5bf824c-7e5b-49bf-9d36-145c80221c74, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
15. Update (Missing): Update for Microsoft Outlook Social Connector 2013 (KB2965257) 32-Bit Edition (abab9d22-a65e-444e-8196-fcceba0aa7b3, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
16. Update (Missing): Update for Microsoft Lync 2013 (KB2889923) 32-Bit Edition (c35eb1f8-5ee7-4192-9ad0-1ae72315ac7e, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
17. Update (Missing): Update for Microsoft Excel 2013 (KB2965275) 32-Bit Edition (ca2c6772-706d-4a4a-a68d-78bbeaa3f56c, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
18. Update (Missing): Update for Microsoft Office 2013 (KB2880487) 32-Bit Edition (cf0b67db-b547-489f-a220-4592d68823b2, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
19. Update (Missing): Update for Microsoft PowerPoint 2013 (KB2965256) 32-Bit Edition (d1b0c046-1d5b-4f6b-afe7-68a863fb7fe2, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
1. Update (Missing): Security Update for Windows 7 for x64-based Systems (KB3046306) (05411874-4d1f-44c4-8aad-dc84726878c9, 202) WUAHandler 15-4-2015 10:15:25 2932 (0x0B74)
2. Update (Missing): Security Update for Windows 7 for x64-based Systems (KB3046482) (11ece05f-164c-4a7c-9f02-9379c61e2e23, 203) WUAHandler 15-4-2015 10:15:26 2932 (0x0B74)
3. Update (Missing): Cumulative Security Update for Internet Explorer 10 for Windows 7 for x64-based Systems (KB3038314) (2be48962-5314-484e-a7e8-16f4679dfea3, 202) WUAHandler 15-4-2015 10:15:26 2932 (0x0B74)
4. Update (Missing): Update for Windows 7 for x64-based Systems (KB2990214) (45f40ba9-5687-4415-85c7-68198f223f0f, 202) WUAHandler 15-4-2015 10:15:26 2932 (0x0B74)
5. Update (Missing): Security Update for Microsoft .NET Framework 4.5, 4.5.1 and 4.5.2 on Windows 7, Vista, Server 2008, Server 2008 R2 x64 (KB3037581) (6c8c0ac4-f40b-4e4b-aa83-1694fe0dbec2, 201) WUAHandler 15-4-2015 10:15:26 2932 (0x0B74)
6. Update (Missing): Security Update for Windows 7 for x64-based Systems (KB3045685) (ab4e2d11-37f2-4f64-b7e1-11e5ca25ce2a, 201) WUAHandler 15-4-2015 10:15:26 2932 (0x0B74)
7. Update (Missing): Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB3037574) (b9d30936-8e3b-4728-988e-78cc39aec684, 202) WUAHandler 15-4-2015 10:15:26 2932 (0x0B74)
8. Update (Missing): Security Update for Windows 7 for x64-based Systems (KB3042553) (cf426941-6ec7-41d2-99ce-710d4ddd543b, 203) WUAHandler 15-4-2015 10:15:26 2932 (0x0B74)
9. Update (Missing): Security Update for Windows 7 for x64-based Systems (KB3045999) (e1107158-3e97-4c23-801c-ede494f9df4a, 202) WUAHandler 15-4-2015 10:15:26 2932 (0x0B74)
10. Update (Missing): Security Update for Windows 7 for x64-based Systems (KB3046269) (ed46d995-c9fb-41e2-94df-146d97d47d07, 201) WUAHandler 15-4-2015 10:15:26 2932 (0x0B74)
1. Update (Missing): Windows Malicious Software Removal Tool x64 - April 2015 (KB890830) (1de9e76a-4e0b-4ee3-b2b2-cccd08f4ff59, 200) WUAHandler 15-4-2015 10:12:18 2768 (0x0AD0)

Hi Tim,
Uninstalling
KB3045999 works as a workaround like Wastashi said. We too have this problem.
@Karen Hu: Startup repair didn't find anything here and this is probably because the system boots properly but only after a user logs in the "Error: userinit.exe - Application Error : The application was unable to start correctly (0xc0000018)"
appears. Safe mode works however and after I disabled all the startup items and rebooted I could successfully logon once, but this could be coincidence because sometimes after a reboot you can login as pointed out by Tim NL. However a few seconds
after I successfully logged in and saw the desktop, the pc rebooted spontaneously. Any idea what this could be causing? Virus scanner maybe?

Acrodist.exe application error

I installed Adobe Acrobat 7.0 successfully. But when I convert a word file into PDF file, a error message pop-up as " AcroDist.exe application error --- the instruction at "0x0048C9e5" referenced memory at "0x0190eb6c", The memory could not be "read" Click on OK to terminate the program "
If I click the program Acrobat Distiller, the same message box shows up.
I tried to uninstalled and re-installed. Couldn't solve the problem.
need help.

This problem came up on my laptop today and I have found a solution, at least on mine. I was getting the exact same error as above (with different memory locations) when I tried to start Distiller (Acrobat 7.0). It had worked fine for years. On mine it was limited to my specific user account. I could run Distiller fine from the Administrator account. I also created a new standard user account to test with and it ran fine from that one as well. But it wouldn't run from my personal account. So I knew it was something with that specific account.
To make a long story short, it ended up being a corrupt cache. You can find the cache in the following location:
C:\Documents and Settings\[your user name]\Application Data\Adobe\Acrobat\Distiller 7\
What I did was just rename the old cache folder and let distiller recreate it. That fixed it. Good luck.

Rwrun.exe - Application Error while running Concurrent Requests in R12(Win)

Hi Gurus,
I am getting the Rwrun.exe Application error, whenever i am running a concurrent request. The thing, that i feel is: Probably, The concurrent requests that has the output file associated with them are the one that are running into error.
The following is the description of the error popup:
rwrun.exe - Application Error
The instruction at "0x663ed168" referenced memory at "0x00000004". The memory could not be "read".
Click OK to terminate the program.
Click CANCEL to debug the program.
Due to this, am not able to submit any of the Reports.
Details of My installation:
Apps Version: Release 12
Platform: Windows XP SP2
Installed on: External HDD of 250GB
Addon Patches after install: None.
Has anybody faced this problem earlier?
Please help me out gurus..
Thanks in advance.
Regards,
Ajit

Check the Event Viewer to see if there is more information about the error that can help.

I am receiving a werfault.exe application error in windows 8.1 for design premium cs5.5

Please help
I am receiving a werfault.exe application error in windows 8.1 for design premium cs5.5.
The product was previously installed on this machine and worked fine. Today is did not load and said to re-install and I get the above error.
Laura

Without exact system information and the crash info nobody can tell you anything.
Mylenium

Javaw.exe - Application Error when installing Oracle 10.2.0.1.0

I hope I am in the correct area. Please forgive me if I have wandered into the wrong space, but has anyone seen this particular issue and what did you do to get around it?
v/r
George
javaw.exe - Application Error
The exception unknown software exception (0xc000000d) occurred in the application at location 0x08f2c799.
Click on OK to terminate the program
Click on CANCEL to debug the program.

Hello
no, this is not the right area, you should post into oracle database forum, this one is for Oracle Collaboration Suite.
Your problem seems to be windows-related, if you want some help tou should try this on a standard windows installation, then if it still does not work post your configuration (in the right forum)

Photoshop.exe Application Error

Open image in CS4, after a couple of minutes a dialog box opens, Photoshop.exe - Application Error, how to fix please?

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Firefox.exe +application error +the application failed to initialize properly (0x0150004) +click on OK to terminate the application.

Win XP Home SP2
Installed Firefox, but receive the following error message:
firefox.exe +application error +the application failed to initialize properly (0x0150004) +click on OK to terminate the application.
Have uninstalled and reinstalled several times, but same message. Firefox won't even open.

Usually someone has been down the track before and occasionally they post some useful details which may help others to investigate and/or eliminate factors in their particular case.
This AccessibleMarshal.dll error seems to have a long history --- posts from 2006 with early Firefox versions had issues similar to yours.
There is a link and an excerpt below which could be worth checking in your case,
particularly since it mentions the problem would occur on a clean install (no previous instance of Firefox on the system and Windows before Vista --??)
Have a look here:
https://bugzilla.mozilla.org/show_bug.cgi?id=712960
and the post to read:
'''Mark Banner (:standard8) 2011-12-22 12:55:21 PST'''
"Created attachment 583905 [details] [diff] [review]
Add the Win32 redistributable directory to the mozconfigs"
"Somehow we missed shipping the Win32 Redistributables from Visual C++. We didn't detect this as it would only show on Windows versions less than Vista, and you'd probably only see it if you had a completely clean install, and you didn't have the dlls installed elsewhere (as it appears my XP system does)."
"If you're seeing this then you want to copy the following files from a Firefox installation:
Microsoft.VC80.CRT.manifest
msvcm80.dll
msvcp80.dll
msvcr80.dll
The patch I'm attaching updates our configuration files to specify the Win32 redistribution directory, which will then cause the build system to include the files in the build."
.... ends....
The earlier 2006 instances also had the same issue in some cases:
forums.frontmotion.com/viewtopic.php?f=10&t=393
Hope this progresses the search and resolution.
Cheers

I can't open itunes after installation, says"itunes.exe-application error"

first time, I installed ipod and itunes from the cd, it failed. then I downloaded from the website and reinstalled, it didn't work, either. afterward I have tried many times to delete,restart and reinstall, it just didn't work at all>_<
every time i double-click the itunes.exe, it says
【itunes.exe-application error
the instruction at "0x10001040"referenced memory at "0x10001040". the memory could not be "read"
click on OK to terminate the program
click on CANCEL to debug the program】
I tried to delete quicktime as well, but it showed that it could not be deleted or something like that...
I can't download music from the computer due to the unworked itunes...help~~~~~~~>_< 
Windows XP

"the following file doesn't exist or is not a valid uninstallation log file
C:\WINDOWS\SYSTEM32\QUICKTIME\UNINSTALL.LOG"
ahhhhh ... one of those.
oddly enough, these ones typically respond better to brute force than they do to finesse. rather than uninstalling QuickTime first, try doing a standalone QuickTime 7.1.5 install "over the top" of what you've already got in there:
Quicktime 7.1.5 Installers … get the one that doesn’t mention iTunes
if the standalone install goes through okay, does your iTunes start launching properly again?

Javaw.exe - Application Error while running JWS

Hi!
I have been working to change our application to work with JWS.
I seem to have solved all hurdles and the application runs perfectly as we want it on my computer.
It works perfectly well on my Win NT and another Win 2000 machine, but other people have problems.
On the machines my application does not work, they have JWS installed all right and they can run the demo applications without any problem.
They can also run my application some time at random.
The error they keep getting is a
Javaw.exe - Application Error
The instruction at "xxxx" referenced memory at "xxxx", the memory could not be "read".
Has anybody had this problem? Any help is appreciated.
This error does not happen on my NT no matter how many times I try to break it.
Thanks
-Nawaz

I Found the problem.
I increased the heap size of the JVm and everything is fine.
-Nawaz

Getting Firefox.exe Application Error on closing firefox

Locking duplicate thread. Please continue here: [[/questions/1002236]]
Hi I have Firefox Browser 29.0.1 and on Windows XP - and I am the least tech savvy person ever. Every time I close The Browser / Firefox I get a pop-up screen Firefox.exe - Application Error
The instruction at "0x0301230e" referenced memory at "0x00000004", The memory could not be "read" click on OK to terminate the program. It dosen't appear to be affecting the operation of anything, but is annoying, regardless of whether I click OK or just close the box with "X" nothing happens - but I'd like to get rid of this, if possible

Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
More information about reinstalling Firefox can be found [https://support.mozilla.org/en-US/kb/troubleshoot-and-diagnose-firefox-problems?esab=a&s=troubleshooting&r=3&as=s#w_5-reinstall-firefox here].
WARNING: Do not run Firefox's uninstaller or use a third party remover as part of this process, because that could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. These cannot be recovered unless they have been backed up to an external device!
Please report back to see if this helped you!
Thank you.

MSIDVBT.EXE Application Error Help plz

Similar Messages

Maybe you are looking for