MSIPVS - TV standard setting does not remain permanent

I am an VOX USB2.0 TV BOX owner which is bundled with the MSIPVS (WinDVR) software from Intervideo. I have updated to version 3 of the program. However, the problem I face did also exist with MSIPVS V.2 which came with the accompanying CD-ROM. The problem is that the TV Standard keeps changing to SECAM_B every time I terminate the application or start recording a tv program, resulting in black and white tv image. Note that I live in Greece where the TV standard is PAL_B. I have set the Country/Region to Greece in the MSIPVS settings, which remains unchanged even after closing the program. The only setting affected is the TV Standard.
How can I set the TV Standard to be fixed at PAL_B without the need to change it manually every time I start MSIPVS?

Welcome to the club. There is later software on the MSI site that fixes that problem but introduces a far worse one. The schedule record function will no longer work. No point in a PVR if you can't do timed recording. I went back to the original software and put up with the default to NTSC problem. I suspect that MSI has lost interest in this product long ago.. This is the second MSI product that I have bought and is a bit of a dog and most likely will be my last..

Similar Messages

Mediasource firmware does not remain permanent

Hi.
I recently updated my Zen Micro with the playsforsure firmware, and then downloaded the mediasource expansion for that so that Mediasource would detect my micro. However, mediasource can only recognise my Zen Micro for one usage, so when I quit the program and return to it, it cannot recognise it any more. Can anyone point me in the right direction? Thanks.

Bumped. Please help.

PDF does not remain in the Registered file types list

I've installed Adobe Reader X. The PDF file type was not automatically associated with Adobe Reader. So, I went through the standard process of adding it to the Windows Registered file types. It does not remain in the list. I've checked the box to "Always use the selected program.....", but when I reopen the Registered File types window, PDF is not there. PDFX is there and registered to open with Adobe Reader, but not PDF.

I forgot to mention, I'm running Windows XP SP3.

System setting does not allow changes to be object CLAS /1SEM/CL_FACTORY_30

hi,
Recently we upgraded our BW system from BW 3.0B to BW 3.5.In BW 3.5,we created a planning area to which we
assigned a transactional cube.Now when we are going for creating variables or planning levels for the planning area it
gives the following error:
System setting does not allow changes to be object CLAS /1SEM/CL_FACTORY_300ZPLAN
Our support packages are as following:
SAP_BASIS       640                   0009
SAP_ABA         640                   0009
ST-PI           2005_1_640            0000
PI_BASIS        2004_1_640            0006
SAP_BW          350                   0009
BI_CONT         353                   0000
Could you please suggest or help us in resolving the issue ?
thanks and regards,
Yogesh

Hello,
the above mentioned note is too old. Please check note 781371.
Please also check in transaction SM30 view V_TRNSPACE
the record for /1SEM/:
Namespace:     /1SEM/
Namespace role C
Repair License
SSCR Popup     X
SAP Standard   X
Gen Objs Only X
Regards,
Gregor

Home Page setting does not survive a system re-start

I have recently started to have trouble with my Firefox Home Page. The settings get lost when I close Windows down and re-start.
I run Firefox 7.0.1 on Windows 7 Starter (SP1).
What have I done?
Set home page to iGoogle in Windows, set home page to iGoggle in Firefox
Result: Home Page setting does not survive a re-start.
Set home page to Blank in Windows, set Home Page to iGoogle in Firefox
Result: Home Page setting does not survive a re-start.
Set home page to iGoogle in Windows, set Home Page to Blank in Firefox
Result: Home Page setting does not survive a re-start.
Checked Firefox help, advised to edit User.j(?) file. Following the instructions failed to locate the User. file, a search of the entire C: drive failed to locate the file.
What next?

''' "Set home page to iGoogle in Windows ..." '''
Firefox has its' own setting for the Firefox homepage, it doesn't use "Internet Options" settings in Windows. <br />
http://support.mozilla.com/en-US/kb/How+to+set+the+home+page
As far as not having a '''user.js''' file, it isn't a standard file in Firefox. It is an optional file that the user creates to "lock" certain prefs or it might be added to Firefox via an add-on or by an "exploit" perpetrated on the user by another piece of software that they installed.

Result set does not fit; it contains too many rows

Dear All,
We are in BI7 and running reports on Excel 2007. Even though number of rows limitation in Excel 2007 is more than 1Million, when I try to execute a report with more than 65k records of output, system is generating output only for 65k rows with message "Result set does not fit; it contains too many rows".
Our Patch levels:
GUI - 7.10
Patch level is 11
Is there any way to generate more than 65000 rows in Bex?
Thanks in advance...
regards,
Raju
Dear Gurus,
Could you please shed some light on this issue?
thanks and regards,
Raju
Edited by: VaraPrasadraju Potturi on Apr 14, 2009 3:13 AM

Vara Prasad,
This has been discussed on the forums - for reasons of backward compatibility I do not think BEx supports more that 65000 rows .... I am still not sure about the same since I have not tried out a query with more that 65K rows on excel 2007 but I think this is not possible...

Data roaming setting does not show up on iPhone 4S

My wife got a new iPhone 4S from Verizon a few weeks and and she's been using it with no probolems since then. Yesterday we crossed the board into Canada and I tried to turn "Data Roaming" off on her phone but the "Data Roaming" setting does not exist in Settings->General->Network. On my Verizon iPhoen 4S it has the optios "Voice Roaming" and "Data Roaming" but on hers only "Voice Roaming".
I was able to turn off all cellular data but that's actually inconvenient because we're right on the border and often go in an out of US cell converage areas, so with data roaming off it lets me use data whenever there's a US cell signal and otherwise prevents me from using data on a Canadian signal, but with all cellular data off, you have to constantly be toggling the setting when you think you go from a cell tower in the Canada to one in the US.
Does anybody have any idea why the "Data Roaming" setting does not exist on her phone yet it does on mine? Both phones are running iOS 5.0.1.

On your wife's phone: Dial *228. When prompted, select 2 to update her roaming capabilities. When complete, you will hear a confirmation message. In about a minute, you will also see an alert that your service update is complete. See if doing that fixes things.

The document "PP_CS_Higher Education_USA_V1" is on a volume that does not support permanent version storage.

The document “PP_CS_Higher Education_USA_V1” is on a volume that does not support permanent version storage. Not sure what this means exactly.
Any thoughts out there?

This error is is usually encountered when trying to update a file that has been opened from a CD or DVD disc.
Move the file to the desktop before you open it.
Where is this file stored, a CD or DVD, external hard drive, USB memory ?

The document is on a volume that does not support permanent version storage

Hi All
I am using Mountain Lion version and i am receiving The document is on a volume that does not support permanent version storage when trying to save a text file on to my QNAP ( Netwrok Storage).
I have done littel research and aparently this is to do with MAC OS, how ever i was wondering if anyone know any ways around this ? or will this be fixed ?
Thanks in adavance.

Mate
That is not what i am saying, if you read my post you will see that this USE to work and it stoped working since mac os 10.8
This does seem to be Apple problem if you read this article
http://support.apple.com/kb/TS4218
the issue i am having is this .
if i create a text file in windows with notepad and save it on a nas drive.
inside a text file i will have
this is a test
i go to my mac open the text file with textedit and add following text in new line
this is test 2
now i go back to windows box open same text file you will see that following
this is a testthis is test 2
basicly what it does it puts it on same line as the first line.
and this all use to be fine before 10.8.2
I am sorry if i came across rude i just need some help.

System setting does not allow changes to be made to object LSYS

Hi
Im trying to create the process chain in BW-Production System . Like im trying to delete the PSA data for one datasource in BI7.0 .
Im using the 'Delete requests from the PSA' process type in the process chain . When i try to give the datasource name and source system name in the variant of 'Delete requests from the PSA' process type and save them , then it is saying that
System setting does not allow changes to be made to object LSYS
Why it is saying like that . But i can able to include the other process types in the process chain .
regards
mohammed

Dear Mohammed,
Since you are trying to create process chain in production system.
Normally production system wont be open for development at any time. Why the system settings does not allow changes was, your production is not modifiable state.
Check the settings in SE06. system would be non-modifiable for sure.
in SCC4, settings ->"changes to the cross customizing objects would be not allowed"
These two settings/configurations would not allow any development or changes or edit or create in production.
Please check with your basis folks and proceed further.
Hope this would help you more in understanding

System setting does not allow changes to be made to object

Hi experts,
I implelemt ST-PI/A today and apply note 1300023. There is a information(???) message keep warning
"System setting does not allow changes to be made to object NOTE 0001300023". I think I should SE06 to modify system change option, but I don't know which one. Please help.

Hi,
If you login in German you can see the variable %1 being replaced by "SDF/" in the Help window.
Or you can find the text in the note:
«/SDF/CCMS_READ CCMS_CREATE_COMP_DOWNLOAD»
Go to SE03 and expand Administration node, Set System Change Option and set Namespace prefix /SDF to Modifiable.
Regards,
André Nunes

Load remote images in html mail setting does not get saved. I have to turn it off every time I log in. Is this a bug?

Load remote images in html mail setting does not get saved. I have to turn it off every time I log in. Is this a bug?

Plug your phone into the wall charger for at least 30 minutes...make sure you have a sim card in the phone...then:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
Make sure you have no anti-virus software running or any firewalls...turn all of that stuff off.

ORA-13754: "SQL Tuning Set" "" does not exist for user "SYS"

While calling dbms_stats.seed_col_usage I got the following error. Can someone help me on how to resolve it
sqlplus
SQL*Plus: Release 11.2.0.1.0 Production on Thu Apr 14 14:37:38 2011
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Enter user-name: / as sysdba
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for IBM/AIX RISC System/6000: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL> show user
USER is "SYS"
SQL> begin
2 dbms_stats.seed_col_usage(null,null,400);
3 end;
4 /
begin
ERROR at line 1:
ORA-13754: "SQL Tuning Set" "" does not exist for user "SYS".
ORA-06512: at "SYS.DBMS_SQLTUNE_INTERNAL", line 17379
ORA-06512: at "SYS.DBMS_STATS", line 28451
ORA-06512: at line 2
Thank You
Sarayu

According to the documentation:
SEED_COL_USAGE ProcedureThis procedure iterates over the SQL statements in the specified SQL tuning set, compiles them and seeds column usage information for the columns that appear in these statements.
Syntax
DBMS_STATS.SEED_COL_USAGE (
sqlset_name IN VARCHAR2,
owner_name IN VARCHAR2,
time_limit IN POSITIVE DEFAULT NULL);>
It looks like you need to provide a SQLSET_NAME and OWNER_NAME to use this procedure correctly, to which you've provided NULLs. I don't see any exceptions in the documentation that indicate special processing when NULLs are provided.

GS004 Set does not exist. PCA account groups

I ran transaction KE5B to copy the financial statement version to PCA account groups. I did not use a suffix or prefix.
The result was an account group has been created in profit center accounting (classic G/L). I can see this account group in transaction KDH3 and I can even change and save it in KDH2. Now when I run a list oriented report from the menu tree (report group 8A26) and I select this account group, the system reports the error GS004 Set does not exist.
The funny thing is when I run an interactive report in PCA and I select the same account group, I don't get this error message and the reports just run.
Please help me out, I need to run these list oriented reports.
BR, Edwin

Hi,
How was everything going on? Have you create a run as account and distribute it to specific computers that being monitored?
Please through the below blog to build your runas account:
Configuring Run As Accounts and Profiles in OpsMgr – A SQL Management Pack Example
http://blogs.technet.com/b/kevinholman/archive/2010/09/08/configuring-run-as-accounts-and-profiles-in-r2-a-sql-management-pack-example.aspx
In addtion, here is a similar thread for your reference:
Run As Account does not exist on the target system or does not have enough permissions
http://social.technet.microsoft.com/Forums/en-US/b3c90ac5-c932-4b13-a5a9-e6991f09e60e/run-as-account-does-not-exist-on-the-target-system-or-does-not-have-enough-permissions?forum=operationsmanagergeneral
Regards,
Yan Li
Regards, Yan Li

Your Application Set does not match the applications in your Retrieval Rule

Hi,
While creating the time card iam getting the error:Your Application Set does not match the applications in your Retrieval Rule Group.
Please Suggest the solution.
Thanks

In Our case, we created a new PERSON TYPE in HR and we forgot to add this type to OTL Preferences.
So in the above scenario:
Go to US OTL Application Developer -> Preferences ->
In the Eligibility Tab. add new row
Name of Rule => any unique name
Name of Branch => enter the name of an existing branch which the time card preferences are going to be the same.
Link By => We use Person Type... You can choose PERSON here but i would not know why you would want to do that
Linked To => Person Type you want to have this for
Precedence => Unique Number
From => make sure to enter an earlier date especially when people are required to enter older than todays timecard since this field defaults to today.
If you totally dont have or want to build a new preference, then you will have to go to the Preference Tab and create a new branch.
in ours, we have Timekeeper and TimeStore and Employees
in Timekeeper -> we have timekeeper timecard layout
in TimeStore -> we have approval style, entry level processing rule, time entry rule groups, timestore retrieval rule group
in Employees -> all we have is really those preferences we;d like to see. Date Format, Enter Negative Hours, Enter Override Approver, Number of Empty Rows, Timecard Delete Allowed, Timecard Layout, Number of Recent Timecards displayed, timecard status allowing edits.
Hope the above helps

MSIPVS - TV standard setting does not remain permanent

Similar Messages

Maybe you are looking for