MSN Hotmail send reply etc buttons non-responsive in Safari

when using MSN hotmail within Safari, everything works ok, except the reply and *send, etc buttons above the messaeg window do not work so I cannot deliver emails from hotmail!:s
i have tried resetting Safari and monitoring cookies but still buttons dont work!

Try going to Mail/Preferences/Accounts/Outgoing Mail Server/Edit SMTP Server List and set up a separate server for each account. That should fix the SMTP problem.

Similar Messages

Volume button non-responsive, speaker works with specific processes only (not itunes, pandora, etc), but functions perfectly with headphones

Volume button non-responsive. Speakers only work with specific functions, but all works perfectly with headphones usually.

sounds like old
https://discussions.apple.com/thread/1343532?start=315&tstart=0

Update to iOS 6.1.2 makes my power button non-responsive !

Anyone have this issue now? Update to iOS 6.1.2 makes my power button non-responsive. It wasn't like this before. It seems to lag for a few seconds before using the power button actually shuts off the screen.

The firewall would be in your router.
I would just keep retrying. The update is first downloaded. Then the update is expanded and then the iPod contacts the Apple server to verify the update. For some reason at that time the iPod can't contact the Apple server. That has happened to me and it went through after one or two retries.

Search button is non responsive in Safari and no pop up window appearing

When trying to search for a product in a page on safari, when trying to press the search button is non responsive.
Before the iOS7 update I would press the search button and a pop up window would appear.
This no longer happens, any help with this would be fanatstic - Thank you

Hi Joerg
did you see NWBC Web GRC v10 WSOD
The comments in there imply it's an issue with IE8. Have you been able to try a different browser? There is a reference to specific IE8 note
Regards
Colleen

Canon pixma mg3510, plug in, push ON, green light comes on, ALL buttons non-responsive

non-responsive canon pixma mg3510 wireless print copy scan , costa rica
1, I take printer out of the box
2, I install power cable. [photo paper light comes on]
3, I install paper per instructions
4, I push power switch [ green power light comes on, stays on, never blinking ]
5, All buttons are non-responsive, including STOP, even when held down 15 seconds.

Tanner,
Your Lombard can run a maximum of 512MB of RAM (2x256MB). The memory module for the top slot is standard height which is approximately 2.0"; the module for the lower (bottom) slot is low-profile, meaning 1.5" or less. The standard height module will only work in the top slot; the low-profile will work in either slot. Also, these 256MB modules are unique to the early iMac, Wallstreet, and Lombard; generic 256s will not work properly.
Generally, when a powerbook's sleep light comes on when either a charged main battery and/or a power adapter is connected, and a power manager reset does not resolve the issue, you have some other hardware problem. Since the 'book is not even turned on, bad RAM would not cause this. If memory were bad, you may or may not get the startup chime, but then you would receive a dialog box on the lit display of a problem with RAM or cache memory in 9.x; OSX does not have this dialog box but nonetheless the POST (power on self-test) still runs.
When you get a power adapter, I would try this:
-remove all power;
-remove the optical drive;
-lift off the keyboard and very carefully disconnect the keyboard ribbon cable;
-disconnect the rechargeable backup battery (PRAM battery);
-lift out the microprocessor card, remove both memory modules;
-disconnect the HD ribbon cable from the logic board;
-reinstall the microprocessor card without any memory;
-connect just the power adapter, then press the power button; if no response, press the reset button on the back panel, then try the power button.
In the above, you have stripped down the powerbook to its bare essentials for a power test. If you have no hardware problem, you should have no light steady sleep light and when the power button is pressed, you should hear 1-beep...no RAM detected.
http://docs.info.apple.com/article.html?artnum=58183
If the above produces no positive results, then you have a failed component somewhere.

Button non responsive

The home button has become slow and non responsive in many cases

Use the software Home button for the time being.
Settings>General>Accessibility>AssistiveTouch>On

7945 can't delete ITL as More button non-responsive (maybe CSCti99770)

CSCti99770 What is the fix for this? I have some phones I can't delete the ITL on when I walk up to them.
I have a 7945 SCCP 9.1.1SR1S that I can’t press the More button in the ITL (it shows unlocked) to delete the ITL. Is the above my bug? What is the fix? It shows insufficient permissions in Bug Tooklit.
We hit CSCtn50405 CUCM DRF Backup does not backup certificates with a same version hardware replacement.
This shows that a Factory Reset doesn't delete the ITL.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/7965g_7945g/6_1_3/english/administration/guide/7965_613_AG/7965trb.html#wp1087544
Video Demo of Problem
https://www.youtube.com/watch?v=LRmVNPqLGtw

It appears the button was broken on the phone. Customer is going to RMA phone.

Home Button Non-responsive

The Home Button on my touch does not work. Stopped working same day I upgraded to 2.1, coincidence? Fixes?
The first questions I had when I got it new: Why is there a mechanical button on a touchscreen device? Why can't I just go between modes with an icon on the screen?

if softreset or restore of firmware dont help i'd suspect
it's a hardware issue which would require fixing
about why there is a home button rather then a on screen button
i guess is it's a quick way to exit applications which an area on
the touch screen would not really be would likely be the bane
of air hockey game players :P

Thunderbird . When I forward an e-mail I lose my toolbars in forwarded copy & cannot turn them on . Therefore, there's no send , contacts , etc buttons .

If all toolbars are off, how do I turn them on ?

Open a Write window.
If no menu bar is showing press the alt key to make it appear.
From the Menu Bar select View-Toolbars and click the missing toolbars on.
Send is on the Composition Toolbar.
Press the F9 key to turn on the contact sidebar.
You can also turn on the contact sidebar from the View menu.

4620 all in one control panel non responsive

4620 all in one printer front control panel buttons non-responsive. The panel shows information but nothing happens when pushing buttons. So I can not copy, etc. I can print from the computer which is directly hooked up. The wireless light is on even though I don't use it. I have tried unplugging with no luck.

Hey , Welcome to the HP Support Forums!
I understand that the control panel display on your HP Officejet 4620 e-All-in-One Printer is unresponsive. I would like to assist you today with resolving this issue. There is the chance that either a power issue or Firmware Programming issue is occuring within your product. Therefore, to start troubleshooting I am going to have you perform some standard hardware troubleshooting steps. Please follow the steps below. Step 1: Check Power: Please plug your printer directly into a wall outlet for power. Power strips and surge protectors may cause your printer to lack power and not respond properly. Once your printer is plugged directly into a wall outlet please power it on. Next, please test the control panel buttons and Copy function to confirm that the issue is resolved. Should the issue persist, please proceed to the next step. Step 2: Perform a Power Reset: Turn your printer ONWith the printer ON please disconnect the power cable from the rear of your printerLeave the power cable disconnected for 60 secondsAfter 60 seconds plug the power cable back inYour printer should start back up on its ownOnce your printer returns to the Ready state please test the control panel buttons and Copy function to confirm if the issue has been resolved. Should the issue persist please proceed. Step 3: Update Firmware: The Firmware is the internal Programming within your printer. Essentially, it is the 'brains' of your printer and controls what your printer does and how your printer does it. If the internal Firmware Programming is corrupted, it may cause performance issues within your printer. Therefore, I would like you to run the latest Firmware Update for your printer. However, before I am able to provide you with the correct Firmware Update to run I do need to know what Operating System you're using on your computer. Once I find out what Operating System you're using I will provide the latest Firmware Update for you to download and 'send' to your printer. Please respond to this post with the result of your troubleshooting. Should the issue persist, be sure to include your Operating System in your response. I look forward to hearing from you. Good luck!

After opening an email of photos from my mom, the email app won't open. I've rebooted the iPad, I've closed the app and reopeneded it. When I open it I get the basic frame (reply button, delete, etc) but none of my accts show up.

When I first opened the email, it took forever to open. Then the pics didn't show up as pics, but as a ton of some kind of code. Since then, the app will open with just the frame, no info in the frame, no email accts or anything. Then it closes automatically after a few seconds.
I've closed the app and reopened it, rebooted the iPad, and gone online and deleted the email itself. But the app still won't open. Help, please!!

Thank you. I tried the soft reboot again, and the home button has been working fine this whole time. I have tried deleting the email acct from the settings and the mail app still opens only empty frames. I have a screen shot of it, but don't know how to post it here to be able to show what exactly is happening.
The mail app will open. I can see the area that usually shows the messages themselves. I can also see the area that usually displays all the accts. Both these areas are completely blank. The search bar is showing on the left hand side, and up on the top right, the download button, reply, delete and compose buttons are showing. At the very bottom left the refresh button is showing. The app sits like that for about 20 seconds and then automatically closes. None of the buttons are responsive. I cannot see any of the email accounts I have in the app (3, usually but 2 at the moment since deleting the acct that seemed to have caused this problem).
I have force-stopped the app, shut down and restarted the iPad, and rebooted the iPad. None of these have helped.

New Printer - Install - OK Button for Language Selection Non-Responsive

I just unboxed my work printer at home and was attempting to set it up. The drivers installed properly on to my computer. However, the last portion for me to complete set up is to set up the language which then will I believe ask for time zone, etc. The problem I'm having is when it asks for language the OK button is non responsive. I tried clicking on anything on the keypad and stil nothing. I reset the computer and printer. Unplugged the printer and started it back up... still nothing. Anyone have any idea why this is happening or am I doing something wrong or not doing something that should be done? Any help would be greatly appreciated. Respectfully, Robin

Hi , I read your post and see that the OK button isn't responsive. I would like to help you.
I can send you reset for the printer to try in a private message.
In the forum beside your handle name just click on the envelope to view it. If you appreciate my efforts, please click the 'Thumbs up' button below.If there is anything else I can help you with, just let me know. Thank You.

Mail will not send, forward, reply, etc.

Hello world,
I've researched and read many support threads but nothing comes close to describing (or solving) this problem a friend has got with her MBP - I hope someone can help. Basically revealed as a 'sudden change' in expected results when using the Apple Mail app., as follows:
System: Apple Mail app ver. 5.3 , OS X Lion 10.7.5, used with Google mail only (flawlessly for about a year so far on this machine). No changes or updates were applied (that might be known) so this is a puzzling problem, an nothing else seems to be affected.
In the Mail app, when attempting to Send, Reply, Reply All or Forward a mail message, nothing happens - no message window is presented to allow continuing with the action. This is true whether using the app buttons for these actions, or menu commands or hot-keys. Mail retrieval continues to be OK; message navigation is not affected, notes can be opened, etc.
It's obviously not a POP server problem because mail is retrieved OK. SMTP settings all appear to be proper, verified as
Accounts > SMTP server > Advanced: Use default ports (25,465, 587), Use SSL.
Possible secondary symptoms?
One first step taken was to ensure all apps were up to date by running Software Update. At the end of the update a restart was required, but was interrupted by the message "Other: Application mail cancelled restart." Mail was force-closed to proceed with the restart.
After being minimized, the mail window can be reopened from the doc position at bottom right of the desktop, but not by re-selecting the mail app icon in its normal position. The app bar indicates that Mail has taken focus, but the mail window does not reappear.
After reviewing Mail Preferences and making a minor change, the preferences could not be saved. Instead, the following message appears: "Error saving preferences. Writing your preferences to the disk has failed. Your preferences may not have been saved. The permissions on ~/Library/Preferences may be wrong or your disk may be full." I can confirm that the disk is not full; at least 200GB free.
~/Library/Preferences Sharing & Permissions: are found to be: "You can only read / System: Read & Write / wheel: Read only / everyone: Read only
Any help towards resolution is much appreciated.

Thanks, all, for your input.
@~Bee: Yes, Mail is friendly enough and wll-integrated and probably beats Thunderbird, which is 'Plan B' . I'm sure this can all be corrected - it's perhaps just a case of finding the straightest path instead of trying 'n' different things and creating 10 other problems along the way.
1. What do you mean, "sudden change?" I know you said that no changes were made to the System, but often, changes are made quickly, and forgotten. So this did not occur after an OS update?
Eseentially: close the lid at night: AOK. Open the lid in the morning: Mail br0k3n. There was no OS update applied manually other than the after-the-fact update mentioned - and I don't believe anything is running on autopilot.
2. Please clairify:
the mail window can be reopened from the doc position at bottom right of the desktop, but not by re-selecting the mail app icon in its normal position.
What does "re-selecting the mail app icon in its NORMAL position" mean???
If minimized, the app can be reopened from the minimized app area (stack area) on the right side of the dock. But if you try to reopen by clicking on the original Mail app icon in its original "normal" position in the dock = no action. My experience is that this is abnormal.
3. What happens if Mail is opened from the Applications folder?
After this time I can't recall if we tried this or not - I believe so but can't be sure. The Mac is miles away at this time so I may have to relay some things.
Thanks Bee.
PS. The secret work-around on iOS 6.1.3 battery drain is to turn off Setting > iCloud > Find My <device>

Mavericks won't install, the button in App Store is blank and non-responsive.

This is extremely frustrating, and I have read every website trying to answer this issue. None of their problems match mine.
I tried to download Mavericks yesterday. It appeared to download as normal, with the icon in launch pad, but the progress bar never moved. I cancelled the download, and tried to restart it. The download button is non-responsive. I've tried going to the store tab, clicking unfinished downloads, and it says all downloads are complete.
When I go to purchases, Mavericks is listed under "other downloads," but the button is solid black with no text, e.g. download or install, and is non-responsive. Clicking the button does nothing.
I have tried using CCleaner to clean the app store's cache, restarting the computer with a full shutdown, quitting and restarting App Store, etc. Nothing works.
If I close and reopen App Store after a full shut down, Mavericks will disappear from the purchases menu. If I go to Mavericks, click "free upgrade," then button changes to "install." When I click install, nothing happens. Mavericks reappears under the purchases menu with its button, again, completely black with no text. The button is non-responsive.
Having a $2,500 Mac, I have to say that I am extraordinarily upset with the shoddy work of Apple over the past few years. For $2,500 I expect the product to work.

Actually, it appears to have started downloading, even the the purchases tab still doesn't reflect it.
Try what I did, typing "sudo nvram boot-args="-x"" (include the quotations around the -x), and then entering your account password.
Reboot the system, which will cause it to do a full reboot (you'll find your mac operates very slowly). Log into your account, then try hitting "free upgrade" and "download" from the Mavericks page in app store (not the purchases tab). It will ask you for your Apple ID and password, then it *should* automatically take you to launch pad.
If the download doesn't seem to be progressing, press the icon in launch pad to pause it. Exit launch pad and scroll down in App Store to 'free apps" on the right side. Click to download one of them, enter your password and Apple ID as usual, and see if it downloads. Once finished, hit the Mavericks icon again to unpause it. It should start then. It's clearly a very large install, so over the past thirty minuites the progress bar has moved roughly a milimeter.

TS1382 4th gen iPod nano wheel and buttons still non-responsive after all t-shooting suggestions performed.

Hello all,
My beautiful 1 year old daughter pull my nano off a Bose speaker dock and ever since the wheel and buttons have been non-responsive. I've tried a rest and all troubleshooting steps with no luck. Does anyone out there have any other suggestions? Thanks.
Mike

Mine is no longer responding to anything but when it's connected to the computer, it will restore and sync, but I cannot turn it off, play music or anything else and I would really like to know a solution for this as well!

MSN Hotmail *send* *reply* etc buttons non-responsive in Safari

Similar Messages

Maybe you are looking for

MSN Hotmail send reply etc buttons non-responsive in Safari