MSN webtv and airport extreme basestation issue?

Hello, My mother has an airport extreme M8930LL/A hooked up to a comcast highspeed internet modem by the wan port and a msn-webtv box hooked to the base station by the lan port. The problem(I know msn;)) is that when she uses the webtv is that webtv sometimes flashes off and on as if the webtv box is powering on off, but it seems more like the signal coming through the ethernet connection from the airport extreme basestation is powering on off. It also appears to be in sync with one of the lights flashing on the basestation. I forget which light as I have been sidetracked from this for a few weeks now and have just been able to get back to it. Any help would greatly be appreciated.
Thank you,
Message was edited by: electriczipper

Hi, It appears that it is a comcast thing and nothing to do with airport or msn webtv. Still trying for a permanent solution as comcast came out and replaced a connection that resolved it temporarily.

Similar Messages

PC Used to work with XP and airport Extreme Basestation but not with Vista

Please help, my PC Used to work with XP and airport Extreme Basestation but not now with Vista. I have a MacBook Pro connected and also a Mac Pro connected to the network on it and they still work, i have put the latest software on the PC and the firmware is up to date. The only thing i can see on the network on the PC is the basestation Hard Disk (shared also to the Macs) but i cannot connect with the password, i have tried everything in my knowledge, including formatting the machine and reinsatlling OS and changing security setting to no avail. Any ideas anyone?

With regard to your printer problem - take a look at this discussion:
http://discussions.apple.com/thread.jspa?messageID=6312413&tstart=0

I have FIOS and the latest version of the Airport Extreme Basestation set up in bridge mode.

OK need some technical answers I have FIOS and am forced to use their Router. I have WiFi turned off on the FIOS router and my New version Airport Exteme Basestation set up in Bridge Mode. I have CAD 5 running to all my Mac computers and a CAD 5 up to the second floor. I have an older version Airport Extreme Basestation that I would like to connect to the CAD 5 cable on the second floor where the WiFi signal is weak as the main Airport is in the basement. How would I connect the second Airport to the Airport that is in Bridge Mode? Will this setup mess up my signal strength on either CAD 5 or WiFi? I will also have one Macbook Pro plugged into the upstairs Airport. This is mainly for the WiFi for my iPad and iPhone. Details will help. Thanks.

How would I connect the second Airport to the Airport that is in Bridge Mode?
Connect from a LAN <-> port on the Bridge Mode AirPort to the WAN "O" port on the second floor AirPort and then use AirPort Utility on a Mac or iPad to set things up.
Will this setup mess up my signal strength on either CAD 5 or WiFi?
Nothing will be messed up, and you will have a much stronger WiFi signal upstairs.
If you need more details on setup.....we need to know.....
1) What model number of AirPort Extreme will be upstairs. The model number is usually embedded in the foam base on the bottom of the device. Starts with an "A" followed by four numbers. Example.....A1143.
2) What operating system you are using on your Mac, or whether you want to use the iPad for the setup...assuming that the upstairs AirPort is compatible.

HT3546 So i recently bought an Apple AirPort Extreme BaseStation (the mushroom shaped one) and was wondering if someone could tell me where and how to find a power cord and how to set it up with my Macintosh (2011 edition with 1.7.5) Thankyou! :)

So i recently bought an Apple AirPort Extreme BaseStation (the mushroom shaped one) and was wondering if someone could tell me where and how to find a power cord and how to set it up with my Macintosh (2011 edition with 1.7.5) Thankyou!

Welcome!
Last question first, as we need to know what operating system that the Mac is using.
If you are not sure, click the Apple icon in the upper left corner of the screen, then click About This Mac, and post back with the OS X Version number that you see there.
Two possible solutions on the power cord
ORIGINAL OEM APPLE AIRPORT EXTREME BASE STATION POWER SUPPLY AC ADAPTER A1202 if you want a white power supply and white power cord to match up with the Apple device
AC adapter for Apple AirPort A1034 Extreme B... if you don't care what color the supply and cord might be
If you don't already have a Setup Guide.....look here:
AirPort Extreme Base Station Setup Guide v4.2 (Manual)

Are there any compatibility issues with Sonos and Airport extreme??

are there any compatibility issues with Sonos and Airport extreme??

Sonos uses its own priopietory wireless protocol SonosNet to distribute audio data among all its products, thus it should not affect other network devices which use standard WiFi 802.11a/b/g/n protocol at all though they may share the same radio channel for wirless signaling.
On my dual-band (5 GHz / 2.4 GHz) Airport Extreme staion, I select the option "802.11n Only (5GHz) - 802.11n (2.4GHz)" and turn on "Use wide channels" in Wireless configuration in order to use only 802.11n protocol and more radio channels to achieve maximum wireless bandwidth of 400 Mbps. This bandwidth is necessary for quick Time Machine backup to NAS connected to the Airport Extreme station through Ethernet cable. So my iMac and MacBook Pro always connected to the Airport Extreme through 5 GHz radio channel with 802.11n protocol whereas my iPhone 4S always connected through 2.4 GHz radio channel with the same protocol.
In my living room Sonos ZP-90 (same as new CONNECT model) zone player is connected to Airport Extreme directly through Ethernet cable (recommended by Sonos) and Sonos S5 (same as new PLAY:5 model) zone player in bedroom is connected wirelessly through SonosNet protocol to the ZP-90 zone player in living room.
These devices are in operation simutaneouly most of the time. Music is playing through the Sonos ZP90/S5 zone players througout the day, I am streaming viedo through Internet (fibre broadband 25 Mbps) on my MacBook Pro in bedroom or iMac in living room or reading news on my iPhone. So far so good and have no encounter any interference problem for about three years. Further more bandwidth for 802.11n protocol does not seem to be affected at all.
In fact with a low power Fujitsu USB drive (2.5" / 500 GB, designed for notebook) plug into USB port of Airport Extreme, it can be used as NAS drive for Sonos music distribution system without any problem. Just transfer all files from Music folder in my home directory on iMac into this NAS drive and set it up as music source in "Manage > Music Library Settings" in Sonos Controller for Mac application will do. Though the same drive can be served as Time Machine's backup disk as well, an independent full-fledged NAS drive for Sonos and Time Machine backup is better long-term solution for reliability and performance. With the NAS configured as sole music source, you do not need to keep any computer powered on all the time in order to play music through the Sonos system.

Is the Time Capsule wi-fi router compatible with the Nest thermostat? I've read where there are issues with the Nest and Airport Extreme (AE)? Is AE used in the Time Capsule?

I've read where there are issues with the Nest and Airport Extreme (AE)? Is AE used in the Time Capsule?
If so, i already have a wi-fi router, so can the Time Capsule simply be used for wireless backup instead of as a router if there is conflict?

A TC is fundamentally a AE with a sata chip included to drive the hard disk. Some slightly different bios to include disk functions, although most of those are also on the AE. So as a router it is 99.999% identical.
And yes, if you have another router you can easily bridge the TC and use wireless for backups and internet connection. Once you no longer route through the TC the issues with most NAT problems including port forwarding should disappear.. mostly this is due to all apple routers using NAT-PMP instead of upnp which is the near universal standard for opening ports.. without upnp apple keep their routers more exclusive.

Extending a network with Time Capsule and AirPort Extreme (via Belkin powerline)

Hello -
I've seen many topics about extending wireless networks here, but none seems to resolve the issue I'm having. I currently have a setup where a DSL cable modem is connected to a Time Capsule and I need to extend this network to another room using an AirPort Extreme.
I live in a very old apartment in Brazil and the walls seem to block the signal from one room to another, hence the need to extend it. Since wireless signal is very weak between rooms, I bought a Belkin powerline AV500 so I could connect both Time Capsule and AirPort using the electrical power at home (just installing a regular Ethernet cable between rooms is not an option).
I started with the basics: configure the Time Capsule + DSL as a standalone network, and it works perfectly within it's range. Then I connected the Belking powerline, plugged a MacBook via Ethernet on the other end and still got very good results (actually better speed than expected). Used it for a while with streaming and other network intensive tasks to make sure it could sustain the connection.
Finally, pluggned the AirPort Extreme on the Belking powerline and this is where the problems started. AirPort Utility 6.3.1 only gives me the option of extending a network wirelessly - it doesn't seem to give me the option of extending it via Etherenet (roaming), which is not good in my case. Luckly I had a copy of AirPort Utility 5.6 which seems to do the job (or I thought so), but it's still not working well.
Although I managed to configure both with the same name, it doesn't seem reliable and some devices (the iPhone 5, for example) are unable to connect and end up with a self-asigned IP address. I'm almost sure I'm doing something wrong on the setup, as I've seen a similar setup working before, so if anyone out there has any clue of what can be done, it will be much appreciated.
Attached the screenshots of both Time Capsule and AirPort Extreme configurations.
Thanks a lot,
-TM
AirPort Exteme:
Time Capsule:

Hello JuliaApple. Welcome to the Apple Discussions!
You have several ways to configure both base stations for what you are trying to do.
The simplest would be to configure the Time Capsule (TC) to "join" (AirPort Utility > Manual Setup > Wireless tab > Wireless Mode = Join a wireless network) your existing 802.11n AirPort Extreme Base Station (AEBSn). In this type of configuration the TC would perform as any other wireless client and not perform as a router. It will; however, still allow for both backups and sharing USB devices attached to it.

Reissue: Connection Timed Out and Airport Admin Utility Issues

I put this post last November, but no one seemed to have a solution to it, so I thought I would try again...
Our lab has and Airport Extreme (802.11g). Intermittently (once a week to a couple of times a day) our airport extreme will stop allowing new connections. Here's what appears to happen. The airport still appears in the the list of networks in the airport icon in the menu bar (ie it still broadcasts SSID), but when I try to connect it whirls for a while and then says connection timed out. If I go to the Airport Admin Utility the base station doesn't appear there even though all of the rest of the ones on our network do (I should at this point, mention that we have both ethernet and WiFi layers on our network--the base station operates as an access point in bridge mode). The only solution is to power cycle the base station. A couple of extra tidbits.
* Base station firmware is current at version 5.7.
* We never have more than about 8 users connected to the base station.
* This inability to connect is independent of what computer is trying to connect and even occurs with iPod touches.
* This problem has occurred for a couple of years (multiple firmware versions).
* I also have similar problems on a network at home that has the new Airport express/extreme N arrangement on a cable internet connection.
* Sometimes this seems to fix itself after 30 minutes or so of just ignoring it. Other times it does not.
* The restoration of the ability of the airport to accept connections after the power cycle is always immediate.
* We only have 6-10 connections, less than the max supported.
* The Airport usually continues to work for those computers that are connected to it before it stops allowing connections.
So couple of questions:
1) Do other people see this problem?
2) Is this some problem with the WAN network connection impairing the ability of the base station to establish WiFi connection that eventually resets itself after something times our or resets?
3) Any suggestions as to what to do about it?

Two reasons I don't think that this is likely the issue. Both are based on my assumptions about how noise would affect the working of a WAP. If these assumptions are erroneous, please let me know.
The first is that I have tried both automatic channel selection and manual channel assignment based on an unused channel that was several channels away from other WAPs. Kind of circumstantial since other devices can emit noise in the same region of the spectrum (our phones are 5.8GHz and the microwave is no where near the base station.
The second though, is that I can stand literally a foot away from the base station with my notebook or iPod touch and still have the same problem. It would seem the the noise would have to be enormous to interfere with a device that close the the base station. Also, why would the other connected devices continue to work?
In the interest of providing a complete picture, I would say I have thought quite a lot about whether noise is a problem. This base station is installed in a lab, with lots of electrical equipment whirring away and to make matters worse, the base station itself needed to be installed right next to (Within inches) a circuit breaker box. I winced when I did this.
Interestingly, the thing normally does work and the signal strength & signal to noise (reported by airport utility) and transfer rates are quite good when you can connect.
Thanks,
Michael

Is anyone using NETGEAR Push2TV with a MacBook Pro and AirPort Extreme and does it work well for you?

I am interested in buying a NETGEAR Push2TV display TV streamer to use with my MacBook Pro and AirPort Extreme.
I saw on the Netgear site that a Intel Wireless Display/WIFI driver software is required for PC's; do we have this software installed already on our MacBook Pro's? Is any one using this box and does it work well for you, any problems or setup issues?

trying to find out same thing , store said works with new intel processor, My mini dont finding.....

How to connect my iPad, Brother printer, and AirPort Extreme?

How to connect my iPad, Brother printer, and AirPort Extreme?

I don't believe any of the Brother printers are AirPrint-enabled. Is your Brother printer network-ready? That is, does is support either/both a wired or wireless connection or just uses USB to connect?

Can a time machine usb drive backup the data from an external usb drive connected to and airport extreme*

can a time machine usb drive conected to my mac book backup the data from an external usb drive connected to and airport extreme ?

Hi Adam, if you think yoiur HD may be failing you could do a TM restore onto the new disk. I would rather see you do a clone either SuperDuper or CarbonCopy Cloner.Of your internal drive. That way you have a bootable backup in case it does fail.
btw - what are the symptoms of your failing drive?
-mj
Message was edited by: macjack

Macbook pro and airport extreme don't work

A friend (and all those tv commercials) say everything just works with Macs. Well, not exactly. New Macbook Pro and Airport Extreme can't connect me to the internet. I still have PC connected via ethernet cable to my cable modem and router which is in the basement where the cable enters the house. I've tried the different options in Airport Extreme setup and nothing works. It doesn't help Apple assumes I know everything about DHP PPPOE NAT or whatever all those silly things are.
Can anyone explain in +very simple+ terms how I get this expensive piece of aluminum connected to the internet?
Thanks.

Hello sofarapplesux. Welcome to the Apple Discussions!
I assume that you will continue to use the modem and router in the basement to get your Internet access ... correct? What is the make/model of this router?
If that's the case, I will also assume that you have the 802.11n AirPort Extreme Base Station (AEBSn) connected by Ethernet to this router ... correct?
So your overall network configuration should look something like the following:
Cable modem > (Ethernet cable) > \[Internet port] router \[LAN port] > (Ethernet cable) > \[WAN port] AEBSn ... close?

Connection Timed Out and Airport Admin Utility Issues

Our lab has and Airport Extreme (802.11g). Intermittently (once a week to a couple of times a day) our airport extreme will stop allowing new connections. Here's what appears to happen. The airport still appears in the the list of networks in the airport icon in the menu bar, but when I try to connect it whirls for a while and then says connection timed out. If I go to the Airport Admin Utility the base station doesn't appear there even though all of the rest of the ones on our network do (I should at this point, mention that we both ethernet and WiFi layers on our network--the base station operates as an access point in bridge mode). The only solution is to power cycle the base station. A couple of extra tidbits.
* Base station firmware is current at version 5.7.
* We never have more than about 8 users connected to the base station.
* This inability to connect is independent of what computer is trying to connect and even occurs with iPod touches.
* This problem has occurred for a couple of years (multiple firmware versions).
* I also have similar problems on a network at home that has the new Airport express/extreme N arrangement on a cable internet connection.
* Sometimes this seems to fix itself after 30 minutes or so of just ignoring it.
* The restoration of the ability of the airport to accept connections after the power cycle is always immediate.
So couple of questions:
1) Do other people see this problem?
2) Is this some problem with the WAN network connection impairing the ability of the base station to establish WiFi connection that eventually resets itself after something times our or resets?
3) Any suggestions as to what to do about it?

Yes, I have the exact same problem.
It's intriguing because I share the connection with my landlord who is often away. The base station is connected in his suite and we seem to never have any problem when only my wife and I are connected on it. I use a iMac 21.5" and my wife a 13" White MacBook (5.2). When he is home (about 1 week per month), that's when the connection will randomly disconnect exactly as you described. He uses a iMac 24" and occasionally an old iBook.

Verizon DSL and Airport Extreme

I'm going to add aniBook (oe whatever Apple will call it by then) this spring, as I want to enjoy the wi fi fun like evryone else. My ISP is Verizon DSL, and I was wondering if anyone else here in the discussion board is currently using an Ibook with Verzion DSL and Airport Extreme. I think Verizon has a modem that supports both wired and wireless networking--which is what I'll need since I won't be retiring my iMac G5 anytime soon. So any adive or info would be appreciated.

I currently have the ActionTech Modem (supplied by Verizon) as my wireless router, but would like to replace that with my Airport Extreme. Can this be done?
You will need both. Since both supply NAT, DHCP services and WiFi Access Point, you will have to turn off all three of those in one of them. This is usually called putting the device in "bridge" mode. My recommendation is to turn off those features on the Actiontech modem/router/access point, turning it into a plain DSL modem, and let the AEBSn do all the 3 features (NAT, DHCP, AP).

MacBook pro and airport extreme router. How to print wirelessly to an old HP wireless photosmart all in one printer

With MacBook pro and airport extreme router, how can I print wirelessly to an old HP wireless photosmart all in one printer? What is needed or what process?

You need to make sure that the HP has an updated printer driver that works with 10.6 for that printer. You can check here:
http://www8.hp.com/us/en/support-drivers.html

MSN webtv and airport extreme basestation issue?

Similar Messages

Maybe you are looking for