MSS 1.41 - General Data iView - Content not updated

Hi Gurus,
This is the first time I have this clue and i'm not able to find anything in the forum concerning this topic.
A manager login the portal and selects an employee through Employee Search iView.
General data iview displays his organizational information but not updated.
This employee changed position on 01.01.2014, data are up-to-date in IT1 but still the oldest data are displayed.
Nothing can be customizing in SPRO neither in PCD.
Maybe a parameter to add in the iview config...
Iview used : mss.generalinfo_generaldata
Thank you in advance for your advices.
Matthieu

Did you check the org.unit and his positions relations ships dates are valid as per IT0001 record.
can you place the screen shots for more clear on this issue ...

Similar Messages

  • Trying to personalize the MSS General Data iView

    We want to make personalize the General Data iView, which appears on the General Information page.  We want to hide a couple of fields (contract text and cap. Utilization) and change the text for another field (Contract Data).  We attempted to do this in the standard way, which is to preview the iView and hover the cursor over the area we wish to personalize and use Ctrlright-click.  The general data iView does not work by itself.  It only works in conjunction with the Employee Search iView on the General Information page.  So then we tried to personalize the same fields on the General Information page also using the Ctrlright-click and then clicking Apply and then Ok.  The changes appear to save while still in preview mode.  Once we close and re-open the page the changes are gone.  The system will not allow us to make personalizations to a page and save them.  There is no error message showing, the changes are just not saved when you re-open the page.  Is there a fix that will allow us to personalize (as an administrator) a page and save the changes?

    Hi,
    Try it by doing it from portal content folder and navigate to the folder where the iview exits and then iview right click ->open object and preview here and do the changes and save.
    If we do it from the content area or from the page the changes will not be there for next time.
    Thanks,
    gopal

  • When Firefox opens my MSN homepage is out of date and will not update

    When Firefox (v 4) opens my homepage is out of date and will not update to the current date even when reloaded

    I'd recommend you delete the URL to your homepage which is causing the problem via Tools | Options | General and then go to the MSN homepage again and click the button "Use Current Page".
    MSN may have changed the coding in the URL which is causing Firefox to load an outdated page with your current settings.

  • SQL 2008 R2 - Mirror sys.master_files data file size not updating

    Hi,
    I have an odd issue where the primary server is SQL 2008 R2 SP1 and the secondary is SQL 2008 R2 SP2. I have databases mirroring between these servers. We recently moved the log file on the secondary to a different drive. The file sizes match and are updating
    exactly the same between both servers. The mirror monitor shows the mirroring successful and everything is up to date. When we check the sys.master_files tables on the mirror, the size of the data file has not updated since moving the log file. Tried restarting
    SQL but not joy.
    Anyone have any ideas?
    Thanks
    Rob

    Hi,
    I would say you wait for some time it would get reflected I have seen this with sys.master_files they are updated late. Like when you delete heavy data, data would be gone but space captured by data would be  released slowly due to internal ghost operation
    cleaning and after this operation completes sys.master_files catalog is updated I guess this is what happening here as well , this is pure speculation. I will stick to this thread please look for a day and then update again
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
    My TechNet Wiki Articles

  • MSS General Data iView

    Hi To all,
    I'm implementing MSS 60.1.5 <b>(No WebDynpro)</b>
    I have a problem with GeneraData iView
    (com.sap.pct.hcm.eeprofilegeneraldata.default)
    It's a JSP and it utilize the RFC HRWPC_RFC_EP_READ_GENERALDATA
    The problem is that the iView do not show in a correct way the data. I.E. next to Employee SubArea(description) show the office adress, or next to salary class(description) show the value of the Employee status.
    Someone know how can I reorganize the view?
    Thanks in advance
    Dom

    Hi,
            Can you help me regarding MSS iview customization (based on par and not webDynpro).There is one iview General data in which we have to add one new field.For that a new function Module is created in the Backend R/3 by ABAP persons.The New Function module wraps the old function Module + the new Field.Do you know How this filed can be shown in our iview.
    Regards
    Imran

  • General Data iView under Employee Profile

    Hi All,
    I need to change the General Data file under Employee Profile in MSS.
    The file name is: com.sap.pct.hcm.eeprofilegeneraldata.par
    Right now the display under GEneral data in portal shows positon name but i need to show the position Number also..the concerned JSP file inside the above said PAr file uses Java class method like data.getPosition() to fetch the position name.
    NOw i am not sure how and by which method i can fetch position number too and display it.
    COuld anyone help/advice..
    thanks

    Hi Mate,
    quite new to these things..but i extracted my par file via WINRAR and i have to change my JSP page..i am able to change it but thing is i don know which method i have to use to fetch the posiiton number.
    The JSP code is like this  -
    <%@ page import="java.util.ResourceBundle"%>
    <%@ taglib uri="htmlb" prefix="hbj" %>
    <jsp:useBean id="data" scope="request" class="com.sap.pct.hcm.employeeprofile.generaldata.GeneralDataBean" />
    <jsp:useBean id="cKey" scope="request" class="com.sap.pct.hcm.orgmanagementeventing.CKey" />
    <hbj:content id="myContext" >
    <hbj:page>
        <%= cKey.getJavaScriptForURLCaller() %>
        <% ResourceBundle rb = componentRequest.getResourceBundle(); %>
        <%
            String payType;
            String payArea;
            String payGroup;
            String payLevel;
            if(data.getCompensationType()==data.TYPE_PAY_SCALE){
                payType = rb.getString("pay_type");
                payArea = rb.getString("pay_area");
                payGroup = rb.getString("pay_group");
                payLevel = rb.getString("pay_level");
            } else {
                payType = rb.getString("sal_type");
                payArea = rb.getString("sal_area");
                payGroup = rb.getString("sal_group");
                payLevel = rb.getString("sal_level");
        %>
        <hbj:form>
              <%= cKey.getHiddenFormField() %>
              <%= cKey.getJavaScriptForEventReceiver(componentRequest, myContext.getCurrentFormId()) %>
              <table border="0"><tr><td colspan="7">
                  <hbj:textView text="<%=data.getName()%>" design="HEADER2"/>  <hbj:textView text="<%=\"(\" + data.getPERNR() + \")\"%>" design="HEADER3"/>
              </td></tr>
              <tr><td colspan="7" height="5px"></td>
              <tr>
                <td colspan="3"><hbj:textView text="<%=rb.getString(\"group_contract_data\")%>" design="HEADER3"/></td>
                <td>   </td>
                <td colspan="3"><hbj:textView text="<%=rb.getString(\"group_communication\")%>" design="HEADER3"/></td>
              </tr>
              <tr>
                <td><hbj:label id="la" labelFor="a" text="<%=rb.getString(\"work_contract\")%>"/></td><td> </td><td><hbj:textView id="a" text="<%=data.getWorkContract()%>"/></td>
                <td></td>
                <td><hbj:label id="lb" labelFor="b" text="<%=rb.getString(\"email\")%>"/></td><td> </td><td><hbj:link id="b" reference="<%=\"mailto:\"+data.getEmail()%>" text="<%=data.getEmail()%>"/></a></td>
              </tr>
              <tr>
                <td><hbj:label id="lc" labelFor="c" text="<%=rb.getString(\"hire_date\")%>"/></td><td></td><td><hbj:textView id="c" text="<%=data.getEntryDate()%>"/></td>
                <td></td>
                <td><hbj:label id="ld" labelFor="d" text="<%=rb.getString(\"office\")%>"/></td><td></td><td><hbj:textView id="d" text="<%=data.getOffice()%>"/></td>
              </tr>
    etc etc----
    if you see here they are using method like getEmail() etc for displaying data on front end screen.
    at the top of this file there is a bean file included -
    <jsp:useBean id="data" scope="request" class="com.sap.pct.hcm.employeeprofile.generaldata.GeneralDataBean"
    this must be having all methods..bt i don know where this bean file can be acceessed? i cant see it anywhere in my extracted PAr file.
    The only requrement of mine is to display postion number next to the text(text is already getting displayed)..

  • MSS- Team- EmpInfo- General Info- EMPSearch is not displaying Search Result

    Hello All,
    Currently we are using MSS BP 1.3.1 & SAP_MSS 600 SP16...
    I am going to the navigation MSS->Team->EmpInfo->General Info->Employee Search [Under Employee Selection Dropdown i am selecting Employee Serach Option], here i am getting the view with lastname, fistname, Personal No:, Even i am using any of the Search Critiria like Serach With LName,FName And PerNo:, No Employee Search result is Displaying Simply No Data Found Message is coming.
    To active this EMp search in MSS do i need configure any steps from SPRO. Any Steps from Portal Front.
    To display Team Calender , i configured IGS, what else i need to do to get Team Calender iview in Team Under MSS.
    Please list out the steps and provide some help to fix the issue.
    Thanks & Regards
    Adapag

    Bala,
    Thanks for ur response, Debug in the Sense we need to Maintain any parameters in the Employee Search Parameters w.r.t MSS in the Particular Method or What?
    I checked in the SPRO--> Integration with other mySAP Components -->Business Packages > Manager self Services (mySAPERP)>Object and Data Provider--> Define Object Selection / Group Parameters for OBJ Search / Define Rules for Object Selection..
    Here we need to create any rule and pass those Group Parameters into that???
    I told my ABAPers to debug those two methods, apart from that any HR side SPRO Configuration pending?
    Please reply me and list out the Steps, Where and What exact config need to do from SPRO apart from that Debugging????
    Thanks in Advance
    Adapag

  • E52 Date Display does not update and reflect the c...

    Right from day 1 the display date of my E52 does not update and reflect correct the correct date. Got the phone replaced once still the same issue. Called the customer service and they say there is no such problem with E52. They asked me to go to the repair center...(isnt that ridiculous to ask a customer of a new phone to do so?). I went to the repair center with a hope that they will replace it for me but all in vain. They also gave me a ridiculous answer that Nokia does not have a replacement policy...and I was like so is it Nokia's policy to sell broken and faulty mobiles? I was utterly dejected. The electronic store where I bought also refuse to replace because they think there is a problem and no matter I get it changed it will recur. I still do not have a solution as all my ways of getting this problem resolved are exhausted. Anyone has a solution or came across this issue which can be solved without repairing?

    Ok let me state my problem. There is a date display and at midnight the date should automatically change to the next date. However that does not happen. The dealer makes the following changes Control Panel>Settings>General>Date and time> Automatic time update> On and this does not solve the problem. Then I get the mobile replaced and that too has the same problem. after going through all permutations and combinations the problem persists. To quote the email from the Contact center for Nokia in HK this was what was suggested
    Menu→Ctrl. panel→Settings→General→Date and time→Time zone→please select Hong Kong→Automatic time update→please select Off
    However, if the situation still occurred by following the above settings, please be advised to bring your Nokia E52 along with the valid sales invoice to one of our Hong Kong Nokia Care Centres for the handset checking since we do not have such arrangement of replacing a new phone to you.
    Please help!!!

  • Finder Content not updating with files on SMB mount

    I have Mountain Lion 10.8.2 on a Mac Mini.  I work in Adobe Lightroom 4 and Photshop CS6 with files hosted on a PC running Windows 7 Ultimate, and access these files via an SMB mount on the Mac.  Both machines are up-to-date on their respective updates.
    This worked fine up til recently, when I started noticing Finder contents don't necessarily update when the files change on the SMB-mounted filesystem.  For example, if I create a new file, say, using Photoshop, and save the file, then try to see the file in Finder  (so I can copy it to another location), the file doesn't show up.  Force-quitting Finder & restarting it causes the new file to appear, but this is a temporary fix, as the problem sometimes recurs again when I create more new files.
    It seems like this problem appeared after the 10.8.2 update, as I never noticed it with earlier releases.  Have any of you seen this?  I do my SMB mounts via the "Connect to Server (CMD-K)" dialog.  Would I be better off mounting it from the command line with some specific options?
    Thanks in advance...

    Try deleting this file: com.apple.sidebarlists.plist
    /Users/YourName/Library/Preferences. Drag that file from the Preferences folder to the Trash, empty the Trash and reboot. See if that helps...
    Seems to me that Adobe is very picky about where the files are kept on the hard drive. You might not want them in the Sidebar. Whenever you do an Adobe software update, the installer needs the path to where those files go. If it's missing in action, it can wreak havoc.
    Make sure when you do Adobe updates, if there is a link included or a Read Me file, check that out first before installing anything.
    Run Disk Utility and Repair Disk Permissions BEFORE and AFTER any software updates:
    Launch Disk Utility. Select MacintoshHD in the panel on the left, select FirstAid, then click: Repair Disk Permissions. Quit DU when it's finished and reboot.
    Carolyn

  • HT1688 iPhone 5S, Settings Cellular Use Cellular Data For Apps - Not Updating

    I have iPhone 5S iOS 7.0.4 with AT&T Contractual Plan.
    When I change any settings in Settings > Cellular > Use Cellular Data For to disable or enable apps to use cellular data. And, if I exit and enter again it shows the old settings.
    Also Call Time > Current Period is not updating.
    This is happening for last one week. I have also noticed heavy cellular data usage for last one week.
    I have reset the phone as a new phone this it is solved, but if I restore from my backup, then the problem is returning again. Even I have deleted some apps, but it doesnot help.
    Please help me to solve this.

    Call AT&T - it seems they are forcing their own settings on you.

  • Meta data (song information) not updating in mini player for radio stream

    I notice in the mini player view, the meta data does not update for radio streams.  This is a big deal for me because I listen to radio stations all the time, and I don't want to have to switch between the mini player and full player to see the song information.  This wasn't an issue in iTunes 10 (and previous versions as I recall), where I could just click to toggle between the name of the station and the meta information.

    I understand your concerns, but regarding the headphone jack, this is standard procedure. While you may have checked these things, and know more about the player, a lot of people will not check the basic things before contacting support. The Advisors have to check these things with you first to make sure they've been checked.
    As far as transferring data goes, it is true that unfortunately we cannot transfer data over for you or make a back-up. Doing this for all the returns for different players would require a lot of resources, time and money, making the RMA process a lot longer for everyone. In some cases, it's even necessary to replace the harddri've or the whole player.
    Cat

  • Why are the date and time not updating in backups.backupdb folder?

    I just started using Time Machine on my early 2011 MacBook Pro running 10.7.2. After the initial full back-up and first few updates, the backup folder (on an external 1.5 TB Firewire drive) continues to show the original "date modified" of the very first back-up and lists the size as a ridiculous 2.48 GB. (Using BackupLoupe, I know it actually is 280 GB, reflecting the size of my internal HD). Any idea why this folder's info is not updating in the finder (even using "Get Info")? Are my back-ups really there? (It certainly seems so according to BackupLoupe).

    First, the best way to view or restore from your backups is via the Time Machine display, per Time Machine - Frequently Asked Question #15.  Using the Finder is not recommended.
    Do not worry about the dates.  First, the date modified only applies to the "parent" folder; that's not the Backups.backupdb folder, but the one inside it that's named for your Mac.
    Don't worry about the sizes, either.  On Leopard and Snow Leopard, the size of a backup folder was the total size of all the items that were on your Mac at the time of that backup (less exclusions).  On Lion, however, it's the "unique size" -- the size of items that appear only on that backup.

  • Master data loads Request not updated to any data target using delta

    When checking the PSA the request updated ICON has red triangle and the mouse over says
    "Request not updated to any data target using delta".
    I am doing full loads for text data and both full and delta's loads for Attributes. This is BI 7.0 system but the loads are still from 3.1.  DTP has not been implemented yet. The system was just upgraded in July.  I am unable to schedule deletes from the PSA for successful loads.  However, I think the data is updating to the info objects.  My Info package has the selection to PSA then in the InfoObject package by package.  
    How do I schedule the deletes from PSA and why does the Request updated show red but the monitor for the info package show green?
    Edited by: Joe Mallorey on Jan 27, 2009 5:46 PM

    Hi shikha,
    The load has not failed but I am unable to delete the load from the PSA.
    If you do a manage on the Data Source or go to PSA from RSA1 the first column has the green gear icon instead of a green check mark I have red triangle the mouse over says "request not updated to any data target using delta" The data has loaded to info object. I am trying to schedule deletes from the PSA and using the option to "delete only successfully booked/updated requests" So how do I get the request updated column to show a green check mark so my deletes will Process? This is for master data only. My transactions load fine and delete properly according to my settings.
    Thanks for the reply.
    Regards,
    JoeM

  • Delivery date from PO not updated with inbound delivery (EDI) date

    Dear all,
    The delivery date in the purchase order (as per my understanding) is the purchase order creation date + the planned delivery time.
    We are using EDI and an inbound delivery gets created when the shipping notification is received from the vendor.
    The real inbound delivery (EDI) date is usually different from the planned delivery date of the purchase order. But the problem is that the delivery date from the PO is not getting updated with the EDI delivery date.
    Is it possible to have the delivery date from the PO updated with the real EDI delivery date?
    I need this because I want to calculate planned delivery costs based on the EDI delivery date, and so far when I post the goods receipt (Price Date Category = "Delivery date" in the PO), the system is taking the price valid at the delivery date from the PO instead of taking the price valid at the delivery date of the EDI message.
    Thanks a lot,
    Annabelle R.

    We have applied the note 793478 "Change of the pricing date in EXIT SAPLEINR 003".
    In our process flow, an inbound delivery is created with reference to the PO, then the goods receipt is done with reference to this inbound delivery.
    When the option 5 "Goods receipt date" is selected in the Conditions Control tab of the purchase order, now when the goods receipt is posted, the price is calculated based on the inbound delivery date, which is what we wanted.

  • Date and Timestamp not updating

    Following on from my previous posts, the date and timestamp of updated files are not being updated in RoboSource Control, i.e. the Modified column in the RoboSource Control Explorer. However, it looks like changes are being stored on the server when topics are checked in, as I can right-click a file in source control that I have changed, choose View, and see the amendments in the HTML.
    Basically, this means that source control isn't recognising that files have changed and therefore when someone tries to get the latest version it doesn’t think there is one because the date and time are the same as previous version.
    Has anyone experienced this behaviour before or know why the Modified column has suddenly stopped being updated?
    Thanks
    Jonathan

    After some digging and random Googling the following article seems to have fixed my issue .
    It seems that if you are running RoboSource Control on 64-bit machines, there are problems with checking in files.
    http://helpx.adobe.com/robohelp/kb/cant-check-files-robosource-control.html.

Maybe you are looking for