MSS 60.1 issues

Hi,
I have installed the MSS BP 60.1. I have set up the necessary systems. When i click on any of the iviews , it shows a blank screen, where each of the Iviews is present. Previously i was getting the "Access denied" error, which i corrected by assigning the permissions in Portal.
Can any one suggest why the iviews are coming blank ? Do we need to do customizing in R/3 for even the iviews to get displayed?
Appreciate your help
Regards
PN

please go through the Documentation which is part of business package.
if you business packages is for WebDynpro then you need to have two connection first one for metadata and second one for application data( for application data you must use logon ticket)
in the portal and R/3 side please check the patch level.

Similar Messages

ESS/MSS Leave Request Issue

Hello All Experts
We have implemented ESS/MSS. Everything is working fine except the Leave Request approval. The approval request comes to the approver's inbox.When we try to open the approval request, the webdynpro application is getting but there is no data in the same. I mean the webdynpro application which is launched is blank.
Could anyone please try to help me how to make this webdynpro application up and running ?
We are using EP 7.0 with ECC 5.0
TIA,
Vivek

Hi Chuckie/Ton Groot,
As mentioned in post by Ton Groot,
I navigated to System Administration --> System Configuration --> Detailed Navigation --> Universal Worklist Workflow à Universal Worklist - Administration
I get a list of
Universal Worklist Systems
System Alias       Connector Type                       Action            Activate
AdHocSystem |   AdHocWorkflowConnector |                        | Deactivate
SAP_ITS_XSS |   WebFlowConnector           |   Re-Register    | Deactivate
ActionInbox     |   ActionInboxConnector        |                        | Deactivate
When I click on Re-Register button under Action, I get the following message
Item type registration was successful for the following systems:
- SAP_ITS_XSS (WebFlowConnector)
I have also cleared the cache by navigating to Cache Administration Page
Still the issue remains.
TIA,
Vivek

Salary Development iView in MSS has an issue

Hi,
We are implementing MSS. I found the Salary Development iView is not getting data into the table (Table is empty). But it is showing properly in the Graphics with years and basic salary.( Please Navigate from Top Level Navigation :Manager Self Service->Team->General Information->SalaryDevelopment iView). I checked all possible ares but no useful info. Kindly help.
Regards.
Syam.T
I have gone through the SAP Note 1029576 and still exploring
Edited by: syam thupurani on Jun 22, 2010 8:39 AM

Hi,
The solution provided by SAP in a custom patch. Our SAP installation was 10 years old and the currency we have created was QR. But later the ISO standards are specifying QAR for Qatar Riyal. The WebDynPro is not recognizing the QR and showing the table empty. SAP has included the QR in the custom code patch and we have implemented and resolved the issue.
Hope this is helpful.
Regards.
Syam.T

MSS Work Overview issue "There is no iView available for system "SAP_ERP_HumanResources": object "employee"

Hello Expert ,
I am facing the below error when Manager clicks on the leave link under column 'Type Of Leave' . (please refer the below picture)
There is no iView available for system "SAP_ERP_HumanResources": object "employee". For more information, contact your administrator.
am I missing any configuration ?
Thanks and Regards,
Ravi

Siddharth's response and the SAP Note he mentioned were both very helpful. I received the exact same error message in a different scenario. While the fix was likely different than the one needed in this specific case, it occurs often in custom MSS and HR Admin roles and I hope this helps someone else out. In my case I needed to add the Pages shown below to my Workset and mark them as invisible.
error message:
fix in my case:
Thanks,
Ben Marsh

Employee search in MSS has an issue

Hi,
I' am logging into SAP Portal through a id who is a manager as per the configuration done in ECC and access Personnel change request iview under which I have 2 views 1) Employee search and 2) Direct reports.
When I select Direct reports am able to get the list of employees who reports to the manager but when I go to Employee search option and try to search through personnel number or last-name or first-name (of any employee who is displayed under direct reports) it is giving the message as no data found.
Can anyone help me in getting this resolved.
Regards,
Pradeep

Hi Siddharth,
Actually we assigned SAP_ALL and SAP_NEW profiles too for the user.
We are on SAP NW Portal 7.0 SP15 and SAP ECC Release 700 and SP15
We have this scenario working in dev and prod environments only in Q it is not working

Sensitive information displayed in MSS when processing forms

Hello Gurus -
I have been testing workflow related to forms triggered by Managers in MSS. An issue I have come across is that in the Process Overview screen (from either Team or Organization) it is possible to click on a link to display the "Current Processor." Drilling down through this link takes you to a pop up window including information about the actual person processing the form. This information includes, date of birth including year, marital status and home address. The people processing the form in most cases would be above the initiator in the Org Structure. Is there a way to turn of this functionality without an enhancement? I am told this is standard delivered SAP and it is not configurable.
Thanks for any input into this issue!
Zajebiscie

The standard WD component: HRASR00_PROCESS_BROWSER will fill the processor details.
Usually there is no customisaiton available for it.
You need to modify the WD component to do so
tables involved in this are
T5ASRSTEPS
and
Table T5ASRPROCROLET >>

ABAP Report Program Logical Database PNP

I have a ABAP program using the logical database PNP. The report is config to run on MSS using EP. I have added code to capture the Org Unit when it is pass to the program from MSS. My issue is how do i capture the org unit value that is passed to the program. I have added code to capture field pnporgeh in the START OF SELECTION event. This works great if you are running the program from R3, but none of my edit checking against field pnporgeh works.

Hi John,
I am also having same trouble where in i have added a new custom(Z) report in the MSS ->My Staff -> Reporting under report category -> Time Management (MSS). I am not able to find how the value of org unit which is selected on portal screen is passed to report in R/3 which is using PNP logical db.
I tested in debugging but selection screen parameter PNPORGEH contains nothing.
Many Thanks in advance for the help.
Edited by: Ankit Kashyap on Nov 17, 2010 12:40 PM

Approve Reject button is missing

Hi,
The central portal is integrated with ESS/MSS, SRM.
Issue : We are not getting the Approve and Reject button in the UWl view for the Manager users.
This issue is occuring after adding the 2 new nodes in the existing Central instance of the portal.
The com.sap.pct.srm.core configuration zip file shows error as Unable to read file in the Universal Configuration.
We are able to upload the xml but it shows the technical name sine the properties file is not loaded(properties file will be part of zip file).
Appreciate if anybody help asap to resolve the issue.
Regards,
Senthil

A reason for this behavior might be that the XML configuration file cannot be generated due to the missing RFC destination for the provider connector. As a result of that, the item type information such as available actions, dynamic parameters, visualization parameters, cannot be retrieved from the backend system.
Please Refer to SAP Note 1133821 and create the RFC destination and check if this will solve your issue.
Also look at my responses in this thread:
Workflow decision buttons not displayed on UWL task - why?
Thanks,
Shanti

Issue while accessing two web-dynpro application, ESS/MSS and Payroll

Hi All,
We are facing one Critical Server Issue in our systems. Following is the scenerio:-
Our Portal system was having one Application known as German Payroll application. Before last two week one more application of ESS/MSS i.e. Time Management has been deployed to our system.
Now the user has two application with two different roles in the portal.
When user try to navigate from Time Management Application to German Payroll application or German Payroll Application to Time Management Application then they are facing Critical Server Error issue.
But once the user try to refresh using CTRL+F5 then the problem got resolved.
========================================================================
German Payroll applications back end server details:P95.
Time Management Application back end server details: P23
Steps to reproduce the issue:
1-login to portalgot to Employee self service tab-wait for 3-5mins
& than navigate to german payroll applications----& faced crtical
server errors:
Log from deafult trace:-
=======================================================
1.#0021280FECEE0028000000A400005A4B0004A2FA644F345C#1305096215265#com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent#sap.com/tcwddispwda#com.sap.tc.webdyn
pro.progmodel.generation.DelegatingComponent#km048893#2758##n/a##fa2a61757b9911e08e660021280fecee#SAPEngine_Application_Thread[impl:3]
_9##0#0#Fatal#1#/Applications/Xss#
Java###null
[EXCEPTION]
#1#com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException
at
com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:107)
at com.sap.xss.ser.xssmenu.fc.ModelHandler.onInit
(ModelHandler.java:205)
at com.sap.xss.ser.xssmenu.fc.wdp.InternalModelHandler.onInit
(InternalModelHandler.java:428)
at com.sap.xss.ser.xssmenu.fc.FcXssMenu.setPersonnelNumber
(FcXssMenu.java:570)
at com.sap.xss.ser.xssmenu.fc.FcXssMenu.onInit
(FcXssMenu.java:292)
at com.sap.xss.ser.xssmenu.fc.wdp.InternalFcXssMenu.onInit
(InternalFcXssMenu.java:455)
at com.sap.xss.ser.xssmenu.fc.FcXssMenuInterface.onInit
(FcXssMenuInterface.java:165)
System 'P95' is not possible because RFC Metadata was retrieved using
System 'P23'. Please assure you have configured the RFC Connections
properly. A Server restart may
be necessary!#
==============================================================
here is the catch....When user is trying to navigate from ESS tab(using
custom jcos for Backend system P23) to German payroll(backend system
P95) after 3 mins ---getting crtical error...Still its using the
data/metadat jcos connection information of ESS applications from
cache...that you can see in default trace.
PS: Standards Jcos are configured for P23 systems:
====================================================
SAP_R3_HumanResources----created with P23
SAP_R3_HumanResources_MetaData----been created with P23
SAP_R3_SelfServiceGenerics----been created with P23
SAP_R3_SelfServiceGenerics_MetaData----been created with P23
=====================================================
P95----Germman payroll
P23---ESS/MSS
Name of Cutsomn Jcos created for bakcend P95 i.e. german payroll
A-P95
=======================================================
SAP_R3_HumanResources:D95
SAP_R3_HumanResources_MetaData:D95
SAP_R3_SelfServiceGenerics:D95
SAP_R3_SelfServiceGenerics_MetaData:D95 configured with sap-wd-arfc-
useSys.
Name of cutom jcos created for backend ESS/MSS P23
B-P23
=========================================================
SAP_R3_HumanResources_MetaData:X23
SAP_R3_HumanResources:X23
SAP_R3_SelfServiceGenerics:X23
SAP_R3_SelfServiceGenerics_MetaData:X23 configured with sap-wd-arfc-
useSys.
========================================================
Jcos parameter of P23 backend:
JCo Pool Configuration
Maximum Pool Size: 50
Maximum Connections: 100
Connection Timeout (msec.): 10000
Maximum Waiting Time (msec.): 30000
Jcos parameter of P95 backend:
JCo Pool Configuration :
Maximum Pool Size: 5
Maximum Connections: 10
Connection Timeout (msec.): 10000
Maximum Waiting Time (msec.): 30000
===================================================================
After more analyzing the situation we found that one web dynrpo component i.e. pcui_gp~xssutils is common to both the application and it is configured to standard JCO i.e.
SAP_R3_HumanResources
SAP_R3_HumanResources_MetaData
SAP_R3_SelfServiceGenerics
SAP_R3_SelfServiceGenerics_MetaData
My thinking is that this component is giving us the problem.
Please provide your comments and solution to rectify this issue.
Also, let me know in case you need more information.
Thanks in Advance
Kuldeep Verma

Hi
First try a very simple application with nothing in it just one text saying Hello World
Run it and see what happens.
Also check if your url uses FQDN name. something like https:
company.name.co:50000\.......
If you do not use the FQDN it will always show a script error on the bottom and some functions will not work e.g
dropdowns.
regards
Yuval.

Issue in direct reportees for manager in MSS Team

Hi all,
I have configured my system according to the document Manager Self-Service (MSS) - MSS team view, managers who do not hold chief position prepared by Mohsin Syed .
In MSS-> Team -> Employee information I am getting the direct employees even the manager is not chief.
But my problem is same manager cannot see the direct reportes in other places say : attendance overview , employee course assignments-> manage participants etc..
see the screenshots : In the same page, no direct reporting employee for attendance over view , but there is for Team calendar.
For the same manager, if he try to book for training, there is no direct reportees.
What I have missed ..please guide me what to do..
Thanks,
Namsheed

Dear Mohsin,
In the Table TWPC_DAATAVWGRP, I have created the new entry 'MSS_LAV_EE1. Assigned to group of Data views in "MSS_LAV_EE_DIR1".
Then in Object and Data Provider -> Organizational Structure Views -> Group Organizational Structure Views,
MSS_LAV_EE -> Assign Organizational view , I have added 1 more entry MSS_LAV_EE_DIR1(Direct Reports)
Then In NWBC I have got a new option Direct Reports and under that I have got 1 person as Absent. but 2 person at work is not showing. Actually there are 3 direct reportees to him.
this is 1 concern
Under Working time->Attendance overview->Select Employees, it is like this :
1 more thing.
Under MSS-> Team-> Employee course Assignments-> Manage Participants : For manager who is Chief can see all direct reportees and book training for them.
For manager who is not chief are not getting the direct reportees so that he cannot book training for them.
If I can retrieve the direct reportees here, then all issues are solved.
Kindly help me with what changes I have to make in system.
Thanks a lot,
Namsheed.

Issues with leave application in MSS

Hi Experts,
I have a issue , actually changed teh portal content of MSS applications including remaining activities and leave request in MSS
Properties changed:
Height Type: full_page from automatic
Isolation Method : UAT from embedded
I have observed adverse effects on the application for ex: manger applying leave on behalf of his DR and the leave gets deducted from mangers quota rather than Drs leave quota.
Please suggest as to what should be done as the above mentioned changes were made in order to resolve an issue with portal that was of portal page not loading fullly and to resolve this issue we changed teh config properties of portal content but this is resulting in other issues what should be done in order to come out of both the issues
Regards
Pooja

Pooja,
The issue is "manger applying leave on behalf of his DR and the leave gets deducted from mangers quota rather than Drs leave quota".
We all, with confidence can say; this is an issue NOT at all related to ACTIVITY:
Properties changed:
Height Type: full_page from automatic
Isolation Method : UAT from embedded
I request you to first check how the logic is implemented in above scenario i.e. X applying leave on behalf of Y and leave deduction of Y. This is root cause which needs to be analyzed and fixed.
Regards,
Ganga

CATS Approval in MSS - same error, other issue?

We have upgraded our portal and HR environment to the latest sp and enhancement packs.
In the testing we get a blocking dump in the time approval in MSS.
error: Exception condition "NOT_FOUND" raised., error key: RFC_ERROR_SYSTEM_FAILURE
debug with st22 gives function module DDIF_NAMETAB_GET
Yes, a lot of topics are handling about this error:
CATS Approval in MSS
CATS Approval in MSS
CATS Approval in MSS
I've checked the table TPT_FIELD_SEL_C between development and our testing environment and they are the same.
The only special thing is that we don't use the standard SAP_LINE approval view (see IMG), but our own custom one. The SLIN is not configured ok, but our own "ZLIN" fields are configured ok (into table TPT_FIELD_SEL_C).
Has anybody an idea?
Debug info ST22
     DATA DFIES_wa TYPE DFIES.
     IF ALL_TYPES IS INITIAL AND lfieldname IS INITIAL.
        lfieldname = fieldname.
     ENDIF.
     CALL FUNCTION 'DDIF_NAMETAB_GET'
          EXPORTING
               TABNAME     = tabname
               ALL_TYPES   = all_types
               LFIELDNAME = lfieldname
               GROUP_NAMES = group_names
               uclen       = uclen
          IMPORTING
               X030L_WA    = X030L_wa
               DTELINFO_WA = dtelinfo_wa
               TTYPINFO_WA = ttypinfo_wa
               DDOBJTYPE   = ddobjtype
               DFIES_WA    = DFIES_wa
          TABLES
               DFIES_TAB   = DFIES_tab
          EXCEPTIONS
               OTHERS      = 2.
     IF SY-SUBRC <> 0.
>        RAISE NOT_FOUND.
     ENDIF.
     IF NOT lfieldname IS INITIAL.
        APPEND DFIES_wa TO DFIES_tab.
     ENDIF.
ENDFORM.                    " Get_nametab_info

I think we have got similar issue and raised an OSS message and the reply we got
This happens due to the missing customisation in Mss.
ie Configuration for screen areas CTS and CTD is missing. View
V_PT_FIELD_SEL is meant to hold the relevant information.
Please have a look at the client 000 for the default customisation.
So, What you need to do is write table TPT_FIELD_SEL_C on a transport
and transport it to client . You will then have all the setting
you need for the application to work.
Also,
The solution is to write down all the
technical field-names from view groups CTS and CTD in table TPT_FIELD_S
EL_C, then use the config area to select the fields properly. This overwrites the TPT_FIELD_SEL_C table entries with ones that have the "tabname" populated! The application will now work as expected.
Please try producing a new transport of the entire table TPT_FIELD_SEL_Cas R3TR TABU with appropriate key and transport to yor system, you
should choose to overwrite the destination table. Please let us know
the result after.
Please check the customisation for MSS approval.
SAP_LINE: Model approval view for line managers. It groups recorded data according to the employees assigned to the line manager.
For example the above view has been defined? or you can adapt to your
needs.
Can you try to import the transport again but make sure that "overwrite
orginals" in the OPTIONS tab is selected?
Transactrion SE01
Select create a the workbench request.
then doble click into the request
and push the button Display/Change
Enter here the entry "R3TR TABU TPT_FIELD_SEL_C"
Push enter
Then one icon with a Key appear
Push the key and enter * for all the table entries or select the
each one that you need.
If the changes are correctly available then it will work correctly
Please ensure that the transport is done correctly
Thanks
Bala Duvvuri

ESS/MSS EHP5 role customization issue

Hi,
We have implemented EHP5 roles on Enterprise Portal 7.0, other version details are: EHP6 and SP9.
Following issues are coming:
1. Our portal is having customized theme. However, the lpd_cust ESS/MSS roles created when rendered Portal is taking Standard blue theme, how can we get our custom theme when lpd_cust roles are launched on Portal.
2. The link text is getting vertically splitted in service map area. Eg. If we have "User Manual" as link text of a application created under lpd_cust folder ESS->User Manual, the text is getting splitted. How can we adjust size of this text?
Please check attachment for both issues.
Looking forward for help.
Regards,
Ashvini.

Hello Luke,
Yes, I mean talent management. The appraisal forms are in the flexible template in SAP Portal.
Thanks in advance for your help
Best regards
Joao

Stylesheet issue in MSS page

Hi,
I am getting stylesheet issue with MSS page after Support Pack Upgrade in our SAP system.
Prior to upgrade the button was appearing with yellow background color.This has changed after upgrade and now there is no backgroud color for the button.Please suggest.
Regards,
Mrinalika
Before Support Pack Upgrade
After Support Pack Upgrade

yes its mandatory to upgrade both FRONT END And backend to the compatible levels.
You cant have one at a higher level than other.
You need to read the notes which are regularly updated by SAP.
You can search for these notes by giving Stack level
Service.sap.com

Issue in MSS Report - Team Absence Overview after backend patching

Hi Experts,
We have SAP EP 640 SP23 connected to backend ERP2004 SP23. we have applied SAP_HRCGB patch 60 on backend system and now facing issues in accessing MSS reports from portal - Team Absence Overview, Basic Employee Data,etc.
Exception from defaulttrace is :
com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component
Component : pcd:portal_content/Pearson/com.pearson.Roles/com.pearson.FT-UK2/com.pearson.MSS_UK2/com.pearson.employee_review_2/com.sap.pct.hcm.eeprofilemonitoringoftasks
When we apply patches in backend system (for SAP_HR component), is it mandatory to apply patches for the deployed ESS/MSS business packages in portal also. And where can we find the information which patch of business package is corresponding to backend patches.
Would highly appreciate your help.
Regards
Davinder

yes its mandatory to upgrade both FRONT END And backend to the compatible levels.
You cant have one at a higher level than other.
You need to read the notes which are regularly updated by SAP.
You can search for these notes by giving Stack level
Service.sap.com

MSS 60.1 issues

Similar Messages

Maybe you are looking for