MSS approval application without infotype 0008 ?

The MSS webdynpro application, which is calling functionmodule HRMSS_CAT_WD_APPROVAL, crashed with error "IT0008_NOT_FOUND".
I added the infotype in PA30 to the manager, and now the application is working fine.
However, we are not using SAP as payroll system, and really do not want infotype 0008, Basic pay, in our master data, since we have to put a value 1, into basic pay for all employees.
It does not make sense to store garbage data in the system.
How to solve this issue ?

Hi Henrik,
We are facing similar error message in the MSS team calendar. Wonder if you can let me know how the issue got resolved.
Many thanks,
Terence
P.S: issue resolved by applying SAP note 1131910 hence, no response requested
Edited by: Terence Bosco on Sep 9, 2009 5:54 PM

Similar Messages

Launch Leave Approver Application without using UWL

Hi
Feedback from initial UAT has been that the users find the UWL awkward to use and the leave approval process has too many steps. They would be happier if they could get to their list of leave applications requiring approval directly ie avoiding the UWL.
Is this possible? In portal content it is possible to open the Leave Approver iview directly and previewing the iview appears to be OK. However when I add this link into the Navigation in our custom MSS role and access through MSS the same iview appears to be blank.
Is it possible to access this application directly?
Regards

Just as an update we have managed to do this avoinding the UWL and it appears to work fine. Just created a new page with the leaver request approver iview on it. My initial problems with the link from the portal were down to my home page configuration and nothing to do with the fact that you need to use the UWL.
We do intend to use the UWL in the future when more functionality is incorporated, it just seemed overkill for one wrkflow application.

Adding a column in the MSS Approval view

What are the options for adding a column in the MSS approval view (CATS regular) ?

there are lot of colums available in cats customisation for this
Please check
In the IMG (transaction SPRO), go to
- SAP Customizing Implementation Guide
- Cross-Application Components
    - Time Sheet
      - Specific Setting for CATS regular
        - CATS regular
          - Approve Working Time
            - Define Field Selection for Individual Approval View
            - Define Field Selection for Detail View
Here you can assign lot of columns to your profile
which is easily customisable

MSS approval Working time

Hi gurus,
We are using MSS 1.0 and EP 7 .I have a small problem.For the approval working Time we are using task TS20000460 task and we modified it based on the requirement of the client .Now we have discovered that when manager approves the time in MSS , the infotypes are updated automatically which the client does'nt want that to happen.Is the MSS approval will work the same way or it's because of workflow.Is there any setting to be done so that when the manager approves it the update will go into the CATSDB table but not the infotypes.
Reply is needed very urgently on this.
Thanks in advance.

Hello,
You need to update the CATSWF transaction not to transfer immediately. Also in the approval profile for the iview SAP_Line uncheck the box to transfer immediate.
Hope this helps and maybe by now you have found your answer.
Maritza

MSS Approval Report Links to Busines Workflow Task in UWL

Hello All,
I have a scenario below that I'm hoping you can help.
I copied the standard business workflow task "TS31000007: CATS Approval by Supervisor" to create our own task (general task) and link the 'CatManagerApprove' application and 'sap.com/msscatapproval' package to this task in the Workflow Visualization Configuration.
We then assigned this new task to the time data entry profile for the portal. Once, employee released the working time, the task is created and send to the Universal Worklist.
The manager can then access the UWL and open this approve time workflow task. This task is open to the MSS Approval Report (similar to what appear under the MSS > Tasks > Approve Time by Manager).
However, I have copied the Approve Time by Manager to our own and changed some of the order of the column and header text and assigned to the MSS role.
I would like to have this CATS approval task open to the same approval report view/layout as in the MSS Approval Report.
I've tried to change the layout (column order) through portal contents of the standard MSS Approval Report because I thought it was reading from there, but it's not.
Does anyone know how this can be done or where to point to the MSS Approval Report on the portal.
Any help would be appreciated!
Tam

Hi Karri,
We were able to use the launch iview task to launch our specific iview but I cannot seem to get it to recognize the workitem. In other words, when I click on the task in the UWL, my approve working time iview appears but it does not have the data that is from the workflow task item. Attached is the XML code that I used:
<ItemType name="uwl.task.webflow.TS93000001.SAP_ECC_Financials" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="launchIView" executionMode="default">
 <ItemTypeCriteria systemId="SAP_ECC_Financials" externalType="TS93000001" connector="WebFlowConnector"/>
 <Actions>
 <Action name="launchIView" groupAction="" handler="IViewLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
 <Properties>
 <Property name="newWindowFeatures" value="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no"/>
 <Property name="page" value="pcd:portal_content/net.saccounty.SacCounty/net.saccounty.approve_ts_data"/>
 <Property name="openInNewWindow" value="yes"/>
 <Property name="display_order_priority" value="5"/>
 <Property name="workitemId" value="${item.externalId}"/>
 </Properties>
 <Descriptions default=""/>
 </Action>
 </Actions>
 </ItemType>
I thought the line <Property name="workitemId" value="${item.externalId}"/> would pick up the work item ID, but it is not working. Any suggestions?
TS93000001 is our task. approve_ts_data is our iview. It opens in a new window correctly and goes to the correct iview, just is not the actual task data.
Thank you,
Mark.

How to retrive data from infotype 0008 &0021 and dispaly as alv output

hi all,
i have to read data from infotype 0008 and infotype 0021 and display as alv grid..
can any one help me..
<removed by moderator>
regards,
viswanath
Moderator message: please search for information and try yourself before posting here.
Edited by: Thomas Zloch on Jan 12, 2012

Hello Sourabh,
If I am not wrong, there are two parts two your query...
a) Data or Content Retrieval
b) Displaying Retrieved content
Here is my feedback
a) The Content can be Retrieved using the FM ARCHIV_GET_TABLE.
Pass the Archive Object, SAP Object and the SAP Object ID and based on the Connection table entries (TOA*), the underlying Content Repository (T-code OAC0) is determined and a request for synchronous retrieval is made to the Content Server.
b) Display of Retrieved content is normally done through dedicated viewers (Ex: Livelink Viewer) or front-end applications (Excel, Word) based on the Protocol (OAA3/OAA4) specified in the Content Reository Configuration. Hence, to my knowledge, you cannot display the content directly in the Smartform.
With Regards
Vijay Gajavalli

Not able to modify the data for infotype 0008 using FM

Hi All ,
I have got a requirement for updating the infotype 0008 data using FM : HR_MAINTAIN_MASTER_DATA.
While trying to modify the wagetypes data which is of blank ..unable to upload the amount for that partcular field ..
For this am herewith the link of o/p :
http://i55.tinypic.com/28jfw2c.jpg for this am also posting the code...
Please suggest me furthur in what way i can upload..
      SELECT * FROM pa0008 INTO TABLE itab_pa0008
FOR ALL ENTRIES IN itab
    WHERE pernr = wa_data-pernr
    AND begda = wa_data-begda_out
    AND endda = wa_data-endda_out.
    DESCRIBE TABLE itab_pa0008 LINES lin.
    IF lin EQ 0.
      c_action = 'INS'.
    ELSE.
      c_action = 'MOD'.
    ENDIF.
    LOOP AT itab INTO wa_itab WHERE pernr = wa_data-pernr.
      CLEAR: wa_bapireturn, wa_bapireturn1, wa_hr_return.
      REFRESH: it_pprop[],it_modified_keys[].
      it_pprop-infty = '0008'.
      it_pprop-fname = 'P0008-TRFAR'.                 "1
      it_pprop-fval = wa_itab-trfar.
      APPEND it_pprop.
      CLEAR it_pprop.
      it_pprop-infty = '0008'.
      it_pprop-fname = 'P0008-TRFGB'.                 "2
      it_pprop-fval = wa_itab-trfgb.
      APPEND it_pprop.
      CLEAR it_pprop.
      it_pprop-infty = '0008'.
      it_pprop-fname = 'P0008-TRFGR'.                  "3
      it_pprop-fval = wa_itab-trfgr.
      APPEND it_pprop.
      CLEAR it_pprop.
      it_pprop-infty = '0008'.
      it_pprop-fname = 'P0008-TRFST'.                  "4
      it_pprop-fval = wa_itab-trfst.
      APPEND it_pprop.
      CLEAR it_pprop.
      flag = flag + 1.
*****************************************************************************************************5
      BREAK-POINT.
      IF NOT wa_itab-lga1 IS INITIAL.
        it_pprop-infty = '0008'.
        it_pprop-fname = 'P0008-LGA01'.
        it_pprop-fval = wa_itab-lga1.
        APPEND it_pprop.
        CLEAR it_pprop.
        bet1 = wa_itab-bet1.
      ENDIF.
      IF NOT wa_itab-bet1 IS INITIAL.
        it_pprop-infty = '0008'.
        it_pprop-fname = 'P0008-BET01'.
        it_pprop-fval = wa_itab-bet1.
        APPEND it_pprop.
        CLEAR it_pprop.
      ENDIF.
*******************************************************************************************************6
     IF NOT wa_itab-lga2 IS INITIAL.
       it_pprop-infty = '0008'.
       it_pprop-fname = 'P0008-LGA02'.
       it_pprop-fval = wa_itab-lga2.
       APPEND it_pprop.
       CLEAR it_pprop.
       bet1 = wa_itab-bet2.
     ENDIF.
      IF NOT wa_itab-bet2 IS INITIAL.
        it_pprop-infty = '0008'.
        it_pprop-fname = 'P0008-BET02'.
        it_pprop-fval = wa_itab-bet2.
        APPEND it_pprop.
        CLEAR it_pprop.
      ENDIF.
*******************************************************************************************************7
      IF NOT wa_itab-lga3 IS INITIAL.
        it_pprop-infty = '0008'.
        it_pprop-fname = 'P0008-LGA03'.
        it_pprop-fval = wa_itab-lga3.
        APPEND it_pprop.
        CLEAR it_pprop.
        bet1 = wa_itab-bet2.
      ENDIF.
      IF NOT wa_itab-bet3 IS INITIAL.
        it_pprop-infty = '0008'.
        it_pprop-fname = 'P0008-BET03'.
        it_pprop-fval = wa_itab-bet3.
        APPEND it_pprop.
        CLEAR it_pprop.
      ENDIF.
*******************************************************************************************************8
      IF NOT wa_itab-lga4 IS INITIAL.
        it_pprop-infty = '0008'.
        it_pprop-fname = 'P0008-LGA04'.
        it_pprop-fval = wa_itab-lga4.
        APPEND it_pprop.
        CLEAR it_pprop.
        bet1 = wa_itab-bet2.
      ENDIF.
      IF NOT wa_itab-bet4 IS INITIAL.
        it_pprop-infty = '0008'.
        it_pprop-fname = 'P0008-BET04'.
        it_pprop-fval = wa_itab-bet4.
        APPEND it_pprop.
        CLEAR it_pprop.
      ENDIF.
*******************************************************************************************************9
      IF NOT wa_itab-lga5 IS INITIAL.
        it_pprop-infty = '0008'.
        it_pprop-fname = 'P0008-LGA05'.
        it_pprop-fval = wa_itab-lga5.
        APPEND it_pprop.
        CLEAR it_pprop.
        bet1 = wa_itab-bet2.
      ENDIF.
      IF NOT wa_itab-bet5 IS INITIAL.
        it_pprop-infty = '0008'.
        it_pprop-fname = 'P0008-BET05'.
        it_pprop-fval = wa_itab-bet5.
        APPEND it_pprop.
        CLEAR it_pprop.
      ENDIF.
*******************************************************************************************************10
      IF NOT wa_itab-lga6 IS INITIAL.
        it_pprop-infty = '0008'.
        it_pprop-fname = 'P0008-LGA06'.
        it_pprop-fval = wa_itab-lga6.
        APPEND it_pprop.
        CLEAR it_pprop.
        bet1 = wa_itab-bet2.
      ENDIF.
      IF NOT wa_itab-bet6 IS INITIAL.
        it_pprop-infty = '0008'.
        it_pprop-fname = 'P0008-BET06'.
        it_pprop-fval = wa_itab-bet6.
        APPEND it_pprop.
        CLEAR it_pprop.
      ENDIF.
*******************************************************************************************************11
      IF NOT wa_itab-lga7 IS INITIAL.
        it_pprop-infty = '0008'.
        it_pprop-fname = 'P0008-LGA07'.
        it_pprop-fval = wa_itab-lga7.
        APPEND it_pprop.
        CLEAR it_pprop.
        bet1 = wa_itab-bet2.
      ENDIF.
      IF NOT wa_itab-bet7 IS INITIAL.
        it_pprop-infty = '0008'.
        it_pprop-fname = 'P0008-BET07'.
        it_pprop-fval = wa_itab-bet7.
        APPEND it_pprop.
        CLEAR it_pprop.
      ENDIF.
*******************************************************************************************************12
      IF NOT wa_itab-lga8 IS INITIAL.
        it_pprop-infty = '0008'.
        it_pprop-fname = 'P0008-LGA08'.
        it_pprop-fval = wa_itab-lga8.
        APPEND it_pprop.
        CLEAR it_pprop.
        bet1 = wa_itab-bet2.
      ENDIF.
      IF NOT wa_itab-bet8 IS INITIAL.
        it_pprop-infty = '0008'.
        it_pprop-fname = 'P0008-BET08'.
        it_pprop-fval = wa_itab-bet8.
        APPEND it_pprop.
        CLEAR it_pprop.
      ENDIF.
*******************************************************************************************************13
      IF NOT wa_itab-lga9 IS INITIAL.
        it_pprop-infty = '0008'.
        it_pprop-fname = 'P0008-LGA09'.
        it_pprop-fval = wa_itab-lga9.
        APPEND it_pprop.
        CLEAR it_pprop.
        bet1 = wa_itab-bet2.
      ENDIF.
      IF NOT wa_itab-bet9 IS INITIAL.
        it_pprop-infty = '0008'.
        it_pprop-fname = 'P0008-BET09'.
        it_pprop-fval = wa_itab-bet9.
        APPEND it_pprop.
        CLEAR it_pprop.
      ENDIF.
*******************************************************************************************************14
      IF NOT wa_itab-lga10 IS INITIAL.
        it_pprop-infty = '0008'.
        it_pprop-fname = 'P0008-LGA010'.
        it_pprop-fval = wa_itab-lga10.
        APPEND it_pprop.
        CLEAR it_pprop.
        bet1 = wa_itab-bet2.
      ENDIF.
      IF NOT wa_itab-bet10 IS INITIAL.
        it_pprop-infty = '0008'.
        it_pprop-fname = 'P0008-BET010'.
        it_pprop-fval = wa_itab-bet10.
        APPEND it_pprop.
        CLEAR it_pprop.
      ENDIF.
*******************************************************************************************************15
   it_pprop-infty = '0008'.
   it_pprop-fname = 'P0008-LGA11'.
   it_pprop-fval = wa_itab-lga11.
   APPEND it_pprop.
   CLEAR it_pprop.
   bet1 = wa_itab-bet2.
   it_pprop-infty = '0008'.
   it_pprop-fname = 'P0008-BET11'.
   it_pprop-fval = wa_itab-bet11.
   APPEND it_pprop.
   CLEAR it_pprop.
********************************************************************************************************16
   it_pprop-infty = '0008'.
   it_pprop-fname = 'P0008-LGA12'.
   it_pprop-fval = wa_itab-lga12.
   APPEND it_pprop.
   CLEAR it_pprop.
   bet1 = wa_itab-bet2.
   it_pprop-infty = '0008'.
   it_pprop-fname = 'P0008-BET12'.
   it_pprop-fval = wa_itab-bet12.
   APPEND it_pprop.
   CLEAR it_pprop.
********************************************************************************************************17
   it_pprop-infty = '0008'.
   it_pprop-fname = 'P0008-LGA13'.
   it_pprop-fval = wa_itab-lga13.
   APPEND it_pprop.
   CLEAR it_pprop.
   bet1 = wa_itab-bet2.
   it_pprop-infty = '0008'.
   it_pprop-fname = 'P0008-BET13'.
   it_pprop-fval = wa_itab-bet13.
   APPEND it_pprop.
   CLEAR it_pprop.
********************************************************************************************************18
   it_pprop-infty = '0008'.
   it_pprop-fname = 'P0008-LGA14'.
   it_pprop-fval = wa_itab-lga14.
   APPEND it_pprop.
   CLEAR it_pprop.
   bet1 = wa_itab-bet2.
   it_pprop-infty = '0008'.
   it_pprop-fname = 'P0008-BET14'.
   it_pprop-fval = wa_itab-bet14.
   APPEND it_pprop.
   CLEAR it_pprop.
BREAK-POINT.
      CALL FUNCTION 'BAPI_EMPLOYEE_ENQUEUE'
        EXPORTING
          number = wa_itab-pernr
        IMPORTING
          return = wa_bapireturn1.
      BREAK-POINT.
     IF c_action = 'INS'.
       CALL FUNCTION 'HR_MAINTAIN_MASTERDATA'
         EXPORTING
           pernr           = wa_itab-pernr
           actio           = 'INS'
         tclas           = 'A'
           begda           = wa_data-begda_out             "'20110401'
           endda           = wa_data-endda_out             "'99991231'
           dialog_mode     = '2'
         luw_mode        = '1'
         IMPORTING
           return          = wa_bapireturn
           return1         = wa_bapireturn1
           hr_return       = wa_hr_return
         TABLES
           proposed_values = it_pprop
           modified_keys   = it_modified_keys.
       IF NOT wa_bapireturn IS INITIAL.
         WRITE : / wa_bapireturn.
         CLEAR : wa_itab , wa_bapireturn.
       ENDIF.
     ELSEIF c_action = 'MOD'.
        CALL FUNCTION 'HR_MAINTAIN_MASTERDATA'
          EXPORTING
         infty         = '0008'
            pernr           = wa_itab-pernr
            actio           = 'MOD'
            begda           = wa_data-begda_out             "'20110401'
            endda           = wa_data-endda_out             "'99991231'
      record        = p_record
         recordnumber = wa_itab-SEQNR
         operation     = change
         nocommit      = nocommit
            dialog_mode     = '0'
         IMPORTING
            return          = wa_bapireturn
            return1         = wa_bapireturn1
            hr_return       = wa_hr_return
          TABLES
            proposed_values = it_pprop
            modified_keys   = it_modified_keys.
        IF NOT wa_bapireturn IS INITIAL.
          WRITE : / wa_bapireturn.
          CLEAR : wa_itab , wa_bapireturn.
        ENDIF.
     ENDIF.
      CALL FUNCTION 'BAPI_EMPLOYEE_DEQUEUE'
        EXPORTING
          number = wa_itab-pernr
        IMPORTING
          return = wa_bapireturn1.
    ENDLOOP.
ENDLOOP.

Here is a sampe, and the logic you are using for wages goes in the internal table for wages (you already have the enqueue & dequeue so you don't have to worry about that, so you only have to add the BAPI_TRANSACTION_COMMIT):
CALL FUNCTION 'BAPI_BASICPAY_CHANGE'
EXPORTING
    employeenumber             = pa0008-pernr
    subtype                    = pa0008-subty
    objectid                   = pa0008-objps
    lockindicator              = pa0008-sprps
    validitybegin              = pa0008-begda
    validityend                = pa0008-endda
    recordnumber               = pa0008-seqnr
    payscaletype               = pa0008-trfar
    payscalearea               = pa0008-trfgb
    payscalegroup              = pa0008-trfgr
    payscalelevel              = pa0008-trfst
*   NEXTINCREASE               =
*   LOCALALLOWLEVEL            =
*   PARTNERSHIP                =
*   CURRENCY                   =
*   COMPARISONPAYSCLTYPE       =
*   COMPARISONPAYSCLAREA       =
*   COMPARISONPAYSCLGRP        =
*   COMPARISONPAYSCLLVL        =
*   COMPNEXTINCREASE           =
*   CAPACITYUTILLEVEL          =
*   HOURSWORKEDPERPERIOD       =
*   ANNUALSALARY               =
*   CASEGROUPCATALOG           =
*   CASEGROUP                  =
*   CURRENCYANNUALSALARY       =
*   REASON                     =
*   NOCOMMIT                   =
* importing
*   return                     =
TABLES
   wagetypes                  = wages.
Regards,
Ryan Crosby

Java Web Start 1.6 fails to start application without Java Consol on Vista

Hi All,
I've faced with problem related to starting my application in IE 7 on Vista SP1 using Java Web Start (JRE 1.6.0_12 and 1.6.0_13). I suppose that issue appears after 11th update of JRE 1.6 since it works fine before.
There were set settings to indicate initial and maximal size of the Java heap in the JNLP file.
Application consist of 2 JAR files and they are signed with the same certificate.
When user tried to start application there is no any activity after accepting certificate. After starting application javaw.exe just disappeared from processes list without any message or error.
When I changed default setting in Java Control Panel to show Java Console, I noticed that the application began to start. But it's not a solution of the issue, since all customers cannot be required to turn on Java console.
I believe this is a bug in JRE as the application starts with Java console and doesn't without it.
When I browsed the web looking for the solution or an advice I found Release notes for 1.6.0_014 where it was said that 6u14 Java Web Start failed to launch and notifies that JARs were not signed, if an insecure Java system property was specified in a sandbox JNLP file. In spite of that 14th updated wasn't used and there was no notification I tried to start application without settings for the Java heap and it worked.
Could someone help me with advice, since the application cannot be started with default heap size settings.
Thanks in advance.
Edited by: vovanst on Jul 28, 2009 8:06 AM

Hi,
as the 6u15 just arrived and the above mentioned bug should've been fixed (though I was unable to verify through the release notes), the error is still in there.
We have no timestamped jars, neither ours nor the bouncy castle ones, all certs are valid, ours is self signed.
6u13 runs, 6u14/6u15 won't.
I followed the instructions here: http://bouncycastle.org/devmailarchive/msg10415.html to no avail.
The bcprov.jar is wrapped in its own jnlp and referred as extension from the "main" jnlp.
The interesting parts of the stack trace are these:
Caused by (via getCause): java.lang.SecurityException: JCE cannot authenticate the provider BC
     at javax.crypto.Cipher.getInstance(DashoA13*..)
     at javax.crypto.Cipher.getInstance(DashoA13*..)
Caused by (via getCause): java.util.jar.JarException: Cannot parse https://localhost:8443/deploy/bcprov.jar
     at javax.crypto.SunJCE_c.a(DashoA13*..)
     at javax.crypto.SunJCE_b.b(DashoA13*..)
     at javax.crypto.SunJCE_b.a(DashoA13*..)
     at javax.crypto.Cipher.getInstance(DashoA13*..)
     at javax.crypto.Cipher.getInstance(DashoA13*..)
For me it seems there's a problem with resolving the url of the bcprov.jar, which would explain the lack of a delay which normally occurs when JCE verifies the signature of the bcprov provider classes. The error pops up almost instantly.
I'm clueless what to do now. Did Sun really achieve to completely destroy JCE provider functionality in Javaws, forcing us to use an alternative implementation?
Patric

SSO for SAP and Non-SAP applications without Enterprise Portal

Dear all,
Is it possible to implement SSO for both SAP and non-SAP applications without involvement of EP at all?
I have gone through this link.
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/e5/4344b6d24a05408ca4faa94554e851/frameset.htm">http://help.sap.com/saphelp_nw04s/helpdata/en/e5/4344b6d24a05408ca4faa94554e851/frameset.htm</a>
But I still i am not able to get the precise answer on how to enable SSO for both SAP and non-SAP applications without EP.
We have decided not to implement EP in first phase of SAP implementation. But we need to enable SSO for other SAP and Non-SAP applications.
A detailed description on how to deal this kind of scenarios will be helpful.
Thanks.

A client of our's uses SAP Enterprise Portal, and is using the SAP SSO, which is implemented with tickets, and requires the use of SAPSECULIB. My company provides an application for this client, and our application in hosted in our data center for the client, as a Software as a Service application, obviously across the internet. Our client, which owns a SAP license, has asked that we support the SAP SSO as a non-SAP SSO application. The client user's SSO ticket will be created from SAP EP, and then passed across the internet to our application, and we are to use that SSO ticket as an authentication ticket to our application. I beleive I know how to do this work technically, having reviewed the SAP document named: "Dynamic Library for Verifying SSO Tickets in Third-Party Software" Specification Version 2.00 December 2005.
My question is, does my company have the right to use the SAPSECULIB? Where is the official download and license download, that indicates we can download this library, and use it to support a SAP customer? We do not own a SAP license. Thank you for your help. I have searched many places in SAP support.

Jdev 10.1.3.1 "ADF Security": Application without a custom login page?

Hi,
We are trying to develop an application using "ADF security", which means we can give permissions to certain roles based on "Binding Container", "Iterator Binding", "Method Action Binding" and "Attribute-level Binding".
After reading the document -- "Oracle® Containers for J2EE Security Guide 10g (10.1.3.1.0) B28957-01" that Frank pointed out. We have a question:
Can we develop an ADF application without creating a custom login page? Right now we've followed the security guide and modified the configuration files. But when we run the application, we get the "user null" error message. The reason is clear because we do not have a login page. On the security guide, it says that it is possible to use the oracle default login module. But it does not say how. Does anyone have any idea?
Thanks,
Annie

Brenden,
Thank you so much for the reply. This is our code in the web.xml:
<login-config>
<auth-method>BASIC</auth-method>
<realm-name>default</realm-name>
</login-config>
We are using HTTP basic Authentication. This technique worked for the container-managed security. The browser default login page pops up when the end users try to log into a secured JSP. But here we want to use "ADF security" to set up "Iterator binding" and "Attribute level binding" security. The browser default login page does NOT show up. Instead we get the "user null" error message.
If you have detailed step on how to select HTTP Basic Authentication, it would be very helpful to us. Or if you know any document has the detail.
regards,
Annie

Running ABAP Web Dynpro Application without host entry of web server

Hi All,
I am trying to run a web dynpro application, its working fine when I have done host entry (host nam.domain.extension) of web server.
But when I remove this entry from host file it not runs.
Can you tell me the posibility of running this application without host entry? Based on this possibility I have to proceed my work. Please guide me.
Thanks and Regards
Sudhir Gupta

Hi Sudhir ,
See the below link , its necessary to provide FQDN.
http://help.sap.com/saphelp_nw70/helpdata/en/67/be9442572e1231e10000000a1550b0/frameset.htm
Regards
Yash

HR ABAP infotype 0008

Hi All,
Please see my below requirement.
i got 2 periods in infotype 0008(in the datailed view)
1.03/31/2009-12/31/9999 and amount is 1500(Present period)
2.01/01/2007-03/30/2009 and amount 1000.(Previous Period)
I want to get the amount from the previous period.that is 1000.
Can you please let me know how to achive this and how to capture previous period.
Regards,
Phani.

Hi Phani,
i got 2 periods in infotype 0008(in the datailed view)
1.03/31/2009-12/31/9999 and amount is 1500(Present period)
2.01/01/2007-03/30/2009 and amount 1000.(Previous Period)
I want to get the amount from the previous period.that is 1000.
You can code something like below:
Select * from PA0008 INTO TABLE l_t_it0008 WHERE Pernr EQ l_pernr.
SORT l_t_pernr DESCENDING BY ENDDA.
READ TABLE l_t_it0008 sy-tabix EQ 2 INTO l_wa_it0008.
Regards
Shital

Infotype -0008 (Changes)

Hi,
The query was if any Change are made in Infotype 0008, by any users if he has authorization of PA30, to change or delete etc.
The client Wantu2019s an email should generate if any changes are made to Infotype 0008.and that mail has to go to the respective head
Any standard report or any customization step pls tell
Regards,

Try Dynamic Actions. Go to SM30 --> t588z --> Maintain.
Enter:
Itype : 0008
Fieldname : Any infotype field in IT0008 whose change has to trigget a mail
FC: Choose function code 2 digits as required (press F1 on the field for further information)
No: Enter a sequence number
S: Choose M(Send Mail)
Variable Function part : Trigger Feature name - Ex. M0001 (press F1 on the field for further information)

Automatic updation of amount of wage type in infotype 0008 for all live emp

Hi,
Please note that I want to upadate one wage type (9001 - bonus) amount from Rs.2000 to Rs.1950 in infotype 0008 for all the live employees.
If I do the following way -
Payroll: India -- > Reimbursements, Allowances and Perks --> Maintain Pay Scale Groups and Levels
then the new value appears only for new entry in Infotype 0008.
Please advice
Warm Regards
S J Rajam

you can try through fast entry screen and update the amount in infotype.

Default Pay scale group and Level in infotype-0008

Hi,
While hiring should display the default Pay scale group and Level in infotype-0008 or the pay scale group and level can default from the Job or position. Itu2019s possible? Thanks in advance.
Regards

No there is no standard Feature to default PSG and PSL. TARIFF is for PSA and PST.
Wait for some body may have some information.
Afrasyab

MSS approval application without infotype 0008 ?

Similar Messages

Maybe you are looking for