MSS BSP problem
Hi all,
I have a MSS problem. When push a link in the BSP application it calls the bakecnd system with hostname:8000. this results in the error:
The following error text was processed in the system:
Die URL enthält keine vollständige Domainangabe (hostname statt hostname.).
In portal I have written the system object with the exsension company.com on the WAS, Connector and ITS. So where does the url come from? ERP?
I need to change the call to be with a fully qualified domain.
Message was edited by:
Ingvild Nygaard
Hi all,
I have checked the BSP aplication and also the tried deactivating/activating the service in SICF transaction. But im getting the same error.
This BSP iView is in MSS performance management. The BSP page is triggered on the click of a link from a WD java application. These links are dynamically generated from the Backend system. My doubt is the application parameters for generating the BSP page must be present in the backend system and passed on. Is there a way to find out the URL for generating the BSP page in MSS???
Thank you,
Viji
Similar Messages
-
Hi All,
I am facing the BSP problem in the EP my problem is ...
Business Server Page (BSP) error
What happened?
Calling the BSP page was terminated due to an error.
SAP Note
The following error text was processed in the system:
BSP Exception: Das Objekt application.do/start in der URL /sap/bc/bsp/sap/hrrcf_start_int/application.do/start?sap-syscmd=nocookie&sap-client=001&sap-language=en&style_sheet=http%3A%2F%2Fepsand1.prosofthq.com%3A50000%2Firj%2Fportalapps%2Fcom.sap.portal.design.portaldesigndata%2Fthemes%2Fportal%2Fsap_tradeshow%2F ist nicht gültig.
Error type:
Your SAP Business Server Pages Team
every thing is fine SICf Service is also active.
when I go to SE 80 to check the URL , I found this URL no 8000 but my port 8010 as below , if i would like to change it how can i change it or please give the alternate solution.
http://xxxxxxx.xxxxxxxq.com:8000/sap/bc/bsp/sap/hrrcf_start_int/application.do
regards,
IqbalHi Iqbal,
I am sure if this Iview is supplied out of the Box from SAP or not. You need to double check with your functional guy who deals with HR (MSS/ESS). To create BSP Iviews read the link below.
http://help.sap.com/saphelp_nw04/helpdata/en/30/1b62799d786445a72ad85acb4fd55b/content.htm
Read point <b>3.7</b> of this DOC. This is step by step guide to create BSP Iviews.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a303e745-0d01-0010-b280-802bca844b8f
Hope this helps.
Cheers
Amandeep.
<i><b>Reward points for each helpful answer.</b></i> -
Hi All,
While displaying a custom field as an input field with F4 Help. i used the statement:
onValueHelp = ="ICWCShowF4HelpExtern(... )"
by passing the relevant values(structure-attribute name etc..) and i am able to see the F4 help as a pop up..
But the problem here is when i select an entry from the F4 list. it is not flowing into the input field!.
Any help/hint really appreciated..
Thank You,
sudeep v d.Just go through the blogs of Thomas for input help in BSP. Hope this will help you.
Link : <a href="/people/thomas.jung3/blog/2005/08/22/bsp-value-input-help-popups-version-30">BSP Input help</a>
Regards,
Animesh -
The tutorial BSP applications are not working in my system at the moment. I have activated all the ICF services and thought that I had set the hostname correctly using the computer's IP address. The message I am receiving in Internet Explorer is:
Following error text processed in system:
BSP Exception: Die URL enthält keine vollständige Domainangabe (192.168.0.100 statt 192.168.0.100.168.0.100).
The address that the page is pointing to is:
http://192.168.0.100:8080/sap/bc/bsp/sap/tutorial_1/default.htm?sap-client=000&sap-sessioncmd=open
Has anyone had this problem in the past?
Thanks in advance for any help.
Cheers,
JBFrom note 616900, the number you should have written on your monitor, we see:
Specifically for fully qualified domain names problems, see:
434918 Configuration for fully qualified host names for BSP
654326 Domain restrictions in a portal environment
654982 URL requirements due to Internet standards
677118 SP31-->: Fully Qualified Domain Names Check
763427 Error message for domain name with underscore
814832 Hostnames and Cookies -
MSS Iview Problem -Any Experts help please
I've configured ESS BP in my Portal successfully and it's running perfectly fine. Now i've imported MSS also without any problems. Now the issue is when i'm launching the My Staff iViews it gives me a message "Could not connect to the R/3 System" . These iViews using the system object "SAP_R3_HumanResources" which has been used by the ESS iViews also. Now ESS iViews are working fine with the same system object but MSS iviews are giving me the error message.
My System landscape :
MSS BP Installed: BPMSS601_19-20001489
R3- 4.6C
Portal : EP6 Sp11
WAS: 6.40
ITS - Standalone ( Not integrated)
when i test my System object for ITS ,it is working fine , but it is failed for WAS Connection and Connector test
Any help will be highly appreciated.Hi Umair,
Thanks for your response, i am getting same error for all iviews.I pointed that there is some problem with my System object, i tried to test connection for the "Connection Test for Connectors" i am getting following error.But Connection test is success for the "ITS Connection"
com.sap.mw.jco.JCO$Exceptionoccured->Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=XXXX SYSNR=00 GWHOST=XXXX GWSERV=sapgw00 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR service '?' unknown TIME Wed Aug 30 16:42:35 2006 RELEASE 640 COMPONENT NI (network interface) VERSION 37 RC -3 COUNTER 11
my understand is , ESS is working fine for me because ,ESS iviews are IAC's based iviews which are running on ITS(ITS connection is working fine for me),
i think some problem with connectors(jco).....could you please suggest me.
Thanks
Aravinda -
Hi,
I'm getting this 'No data available' message in the Attendance Overview iview even though the data is maintained in R/3. i'm using MSS 60.1.3
Any ideas?
Regards,
RajIs this the only iview this is happening on? I had simular problems but it was related to having chief access and 105 in R/3. Verify you have the HR system set up with an allias SAP_R3_HumanResources under System Administration/System Configuration/Systems (you have probably already done this but double check). Also if you aren't using single sign on or something like that make sure you have usermapping under personalization set up for SAP_R3_HumanResources.
I know these are the basics and you have probably gone over this already. But it has been the little stuff that has bit me every time.
Roy Richardson -
Hi all,
I have configured ESS/MSS and the works using the config docs provided in this forum.
The problem I am having is as follows:
I have a user in ECC5 - ESS_USER1
The same is created on Portal - ESS_USER1
The logon works fine....
But if I logon to portal with another User ESS_USER2 which does not exists in Portal, I am not able to logon.
Can anyone point me in the right direction.... have I missed something....?????
thanx in advance
DeepakHere is the "chain"....
+portal user
.....tied to backend ECC5.0 with either SSO or User Mapping...
.....+ backend ECC5.0 user
...........tied to employee record by the employee ID
to tie a system user to employee record....
1)execute t-code PA30
2)select the employee id you need (personnel number)
3)enter infotype 0105 (communication) in the input box at the bottom
4)enter subtype 0001 (SAP userid)
5)select "create"(or "change") icon in the top left
6)on the screen the follows enter the SAP userid to tie to the employee and enter the date range when this goes into effect.
sooooo to answer your question, the backend users must exist in the front end portal UM repository (wherever you are pointing the portal to look for all your users...ie. user pool) as well. -
Hi pple,
We are seting up EREC system on ECC 5.0,EP 6.0 and EREC 3.0.
We did the needed Technical Settings for the EREC system.
When we tried TESTING the BSP Application - <i>HRRCF_START_EXT</i>, it's asking for EREC User id and password. When we typed in the id and password, we are getting an error -
"<b>Name of logical port '&lp_name&' is invalid</b>"
The validation of user id and password is getting done properly, but only thing is, after validation, we are getting this error.
In fact we tried out same thing with another BSP Application - <i>HRRCF_CAND_REG</i>, And when we enter all these details, the USER ID is getting created properly in BACKEND System, but getting the same error in the next screen of that application.
Can anyone help us in these regards.
Regards,
<i><b>Raja Sekhar</b></i>Hi pple,
I solved the problem with the help of SAP Support.
Well, the problem is due to 2 reasons.
1) We got to test the EREC BSP Application by creating the URL using the RCF_GENERATE_URL report and use this URL to test the EREC Application.I created my IView and copied the application parameters(which I got from my generated URL) in my IView definition.
2) The error "Name of logical port '&lp_name&' is invalid", comes due to lack of OTR Definition. We got to define OTR's for every application,Group,Page so that we can see the correct description.
All these works only after setting the SYSTEM PARAMETER in EREC Technical Settings.
And there is no problem with LOGICAL PORTS at all.
I hope this solution will be useful for many pple like me.
Regards,
<i><b>Raja Sekhar</b></i> -
Hello,
I have a BSP application with a strange probelm, which occurs only when NO breakpoint was set in my code.
So I can not analyse the problem with Debug, because it runs perfectly with the breakpoint.
Does anybody have the same expierence.
Thanks
Yang YangHi Yang,
Please see the following Wiki link. It has little explanation about "Application only Works in Debugger".
[Debugging Problems|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/bsp/debugging+problems]
Hope this may help you for this issue.
~Salil -
Upgrade 620 to 640: BSP problems
Ok, I know there are a few of you in here who have done this so speak up
I just upgraded our 620 SP47 server to 640 SP11 and I've started going through checking out all our apps. I'm on the last app now and it's of course the biggest.
I'm getting nothing but strange problems about "How I can't use that variable as 'Protected' in my controller class" or I am getting syntax errors CL_O2ELI489813B0ROMNXZ1RWW5ON5C
in the Include "CL_O2ELI489813B0ROMNXZ1RWW5ON5CO " in line 5:
"Implementation missing for method "%_ONLAYOUT". "%_ONLAYOUT"."
So has anyone come across this or do I need to open an OSS message?Hallo Craig,
We have had these mysterious problems a few times. Unfortunately not long enough to understand why. Two options:
(A) Open OSS message so that we can mess around for 5 days in your system. Maybe we understand it then. Will require some workbench expertise.
(B) Just reactivate all BSP pages (what we will do in anycase in the end:). Control-F3 on each page should make the problem go away. (From what I remember you can select them all in the tree on the left and do it that way.)
bye, brian -
Calling web-dynpro-transaction in BSP problem
hi,
in my BSP html-coding i have the following:
o nclick="window.open('xxxxx.xxxxxxl:8011/sap/bc/gui/sap/its/webgui~transaction=Z_LSO_WF_UEB{code
when i push the button in the portal i get to the transaction Z_LSO..... in sap. this is fine, BUT:
sometimes the new window opens and in the middle of the screen the 'round icon' (which is displayed when a page is loaded) is displayed and nothing more happens.
then i have to push F5 (refresh) in internet explorer and then the start-selection-screen of my transaction appears correctly.
in other tries it works fine, then i get to the selection-screen after pushing the button without pushing F5.
any ideas bout that behaviour ?
best regards, Martin
Edited by: Martin Svik on Apr 30, 2008 1:50 PM
Edited by: Martin Svik on Apr 30, 2008 1:53 PM
Edited by: Martin Svik on Apr 30, 2008 1:53 PMThanks Raja,
I am in 4.7 E
This is my code for VF03 ,
this is layout code of page
<%@page language="abap"%>
<<html>
<body bgcolor = "silver">
<form>
<input style="Z-INDEX: BACKGROUND-COLOR: #FFFFFF;
BORDER-BOTTOM: black 1px groove; BORDER-LEFT: black 1px groove;
BORDER-RIGHT: black 1px groove; BORDER-TOP: black 1px groove;
FONT-FAMILY: Verdana, arial; FONT-SIZE: 8pt; TEXT-DECORATION: none"
type="text" name="number" value = "" maxlength = 10>
<INPUT style="Z-INDEX: 103; BACKGROUND-COLOR: whitesmoke" type="submit"
name="onInputProcessing(select)" value="Display" action = "tcode.htm">
</form>
</body>
</html>
This is its event handler(OnInputProcessing)
event handler for checking and processing user input and
for defining navigation
case event_id.
when 'select'.
navigation->set_parameter( 'number' ).
navigation->next_page( 'tcode' ).
set parameter id 'VF' field number.
endcase.
*****This is code for next page
Layout
<%@page language="abap"%>
<html>
<body BGCOLOR="#f5f5f5">
<h2> Your Customer search </h2>
<%
if number is initial.
%>
<h3> Sorry, we found no matches for <%= number %>. </h3>
<%
else.
%>
<%
endif.
%>
Event Handler(OnInitialization)
if number is not initial.
SET PARAMETER ID 'VF' FIELD number.
call transaction 'VF03'.
else.
number = '%'.
endif.
Plesae check it, I am waiting Or Give me sample code for any TCODE.
Thanks,
Dhananjay -
MSS Configuration problem.
Hi all,
i am on ECC 5.0 and ep 6.0 and i uploaded business package "BP_ERP4MSS0_2-10002991.zip" and patch "MSS10_0-10002964.sca."
Right now i am able to see all the iviews in "MY STAFF" and "MY BUDGET". But when i am selecting any area groups its giving the error
Do i also need to apply any other patch like "PCUI .sca"files. if so give exact patch to be applied.i am a mss beginner.
Thanks,
SaibabaSaibaba,
Check PCUI sda files on document CONFIGURING THE BUSINESS PACKAGE FOR EMPLOYEE SELF SERVICE (ESS)-MYSAP ERP 2004 within
Configuring The Business Package For Employee Self Service (ESS)-mySAP ERP 2004
James -
Hi Experts,
We have upgraded our system from ECC 5 to ECC 6 but now the form layout got changed in ECC 6 in portal view , It uses a BSP application HAP_DOCUMENT , everything is same defined as in ECC 6 .Hi,
Check the system definition in portal.
a. Edit the system being used by your BSP iView
b. Check the value for WAS settings,host, port and path
c. Ensure that the port is correct
d. Save the changes to the system
Check your BSP application. It should be fine.
Thanks and Regards,
Prasanna Krishnamurthy -
BSP can not show when host isn't in a domain
Hi guys,
I tries to configure alert in XI Runtime Workbench but failed, then I followed one how to guide in SDN : How to monitor exchange infrastructure.
then I test, and try and test.
finally I found out it is a BSP problem. I have tested a simple BSP application "webservicebrowser" in se80. but it show error.
could you help me?Hi,
follow sap notes: 750287
regards
ravi. -
BSP - Client with Account Group
Hi all,
we just finished upgrading our Support Package to level 10 (SAPKU40010) and we get now a new problem with BSP application. Everytime the BP is created via BSP application, the screen stays in "Change" mode and furthermore there is a Bdoc errormessage that the MasterData is locked by user. Because of this errormesage the account group of the BP is not automatically fully sent to R3. Reprocessing of this errormessage does not always work, firstly if the user still stay in the screen and secondly the account group also does not fully sent to R3.
The creation of the BP via the CRM GUI works well and the account group is fully sent to R3 regardless the errormessage. Thus it is actually real BSP problem.
Does anyone ever get the same problem? And how to solve this because we do not get this kind of problem with the previous Support Package.
Best regards,
Audrey N. TamaraWelcome to SDN.
may be try this in CRM forum for a quicker resposne.
SAP CRM: Webclient UI - Framework
Regards
Raja
Maybe you are looking for
-
SAP Internet Mail Gateway for MS Exchange 2003 Server
Hi, Has anybody successfully configured the IMG to work with MS Exchange 2003? We have our 4.6C currently configured to talk to Exchange 2000 through SXC Note 594428 - SXC: Exchange 2003 Server is not supported Solution R/3 Basis Release 3.1I to 4.6
-
Dear All i have a Business Rule callingin BPEL Process based on below XSD file <?xml version="1.0" encoding="windows-1256" ?> <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://www.bank.com/bankbpel" targetNamespace="http://www.ba
-
About jbuilder4 and weblogic6.0
when i want to deploy my jar to weblogic and do as the wizard,select the folder application as standalone,then start deploy. it will report: Stored archive as D:\weblogic\wlserver6.0sp1\config\mydomain\applications\test.jar Error type: java.lang.Secu
-
Highlight or Bold some fields that were modified
Hi all, The Report needs to highlight or bold values that were modified. Changed new values Added new values Deleted values should be changed ,after the value changed in the database please give me suggestions or send the sample code regarding this p
-
I seem to be having a rather annoying import issue with python. I am programming a small game using pygame, I'm almost complete with it, but have become rather annoyed that my source code for it is rather ugly and unordered. I wanted to be able to re