MSS:  Cannot Start Transaction HRWPC_FC_EXEC

We have three custom ABAP reports setup for the 'Reports' tab in MSS.  Two of them work fine, but one of them is giving this error message:
Cannot Start Transaction
The Internet Transaction Server could not start the transaction "HRWPC_FC_EXEC" because of the following error: .
It doesn't give an error message, so I have no idea what the error is.  Any ideas?

I would check/try the following:
1)Does the transaction exist and does it need to be published to the ITS?
2)Does the user have the appropriate security profile to run the report - try with SAP_ALL and SAP_NEW as a test?
3)Run the transaction directly in R/3 SAPGui with your test user ID, what happens?
4)Is your test user appropriately integrated into your org chart (does the MSS report rely on this?)
Just some ideas.... hope something gives you a clue

Similar Messages

  • ESS - Cannot Start Transaction

    Hi,
    After maintaining infotyp 0105 and subtyp 0001, I'm getting and error message as folows (after clicking on almost all the functions, e.g. Personal Data):
    Cannot Start Transaction
    The Internet Transaction Server could not start the Transaction "pzxx" because of the following error. You are not authorized to use Transaction PZXX.
    Appreciate if someone could help me on this. Thank you.
    Best Regards,
    Hapizorr Rozi Alias

    Dear Srinivasa,
    I found your blog "What is UDDI?". I liked!
    I have a question about UDDI.
    I had configured the UDDI on server host XXXXX and can access it though
    the links (the UDDI works):
    - http://<host>:50100/uddiclient
    - http://<host>:50100/uddi/api/inquiry
    - http://<host>:50100/uddi/api/publish
    But when I try to enter virtual URL http://uddi.<domain>.net/publish I
    receive the message error "HTTP 404 - File not found Internet
    Information Services"
    Could you help me?
    Thanks a lot!
    Luciana
    Brazil

  • Cannot start transaction SMEN

    Hi ,
       When we try to execute any transaction after loggging in to our system we are getting a message "    Cannot start transaction SMEN".Any idea to what may be wrong .Please help.
    Max

    This is normal. SMEN cannot be started by giving transaction code in CMD field. When you execute it you will a pop up with message. There is question mark icon in the pop up which explains the same. Only if you check it !!
    Regards.
    Ruchit.

  • SRM portal: Cannot start transaction for shopping cart -wizard

    Hello All,
    User is not able to access the Shopping cart-wizard in EB portal, user has updated the internet  explorer to internet explorer V7 still he is not able to access.
    When user clicks on Shopping cart-wizard he gets the following error "Cannot Start Transaction**
    *The internet transaction server could not start the transaction "BBPSC02"* .
    Please let me know how can I resolve this issue.
    Have checked the attributes for this user it is maintained to access portal, all roles are properly assigned.
    Thanks.

    Hello,
    Service BBPSC02 is only not started from portal or you cannot start it as well when using the ITS link?
    Are you able to test the service via transaction SICF?
    Regards,
    Ricardo

  • Cannot start transaction SXMB_IFR

    Hi there
    Im completing the post installation steps of a XI 3.0 install after implenting Support Stack 10. I get the following error when calling the above transaction
    or http://hostname:50000/rep/start/index.jsp
    Exception class: java.lang.NoClassDefFoundError
    Message
    java.lang.NoClassDefFoundError: com/sap/aii/ibrep/server/check/GeneralDeletionCheck
    Thrown:
    java.lang.NoClassDefFoundError: com/sap/aii/ibrep/server/check/GeneralDeletionCheck
         at com.sap.aii.ibrep.server.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:665)
         at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:33)
         at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponentImpl.startup(ExplicitApplicationComponentImpl.java:116)
         at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponents.startup(ExplicitApplicationComponents.java:378)
         at com.sap.aii.ib.core.applcomp.ApplicationComponent.startup(ApplicationComponent.java:201)
         at jsp_Main1109268574428._jspService(jsp_Main1109268574428.java:21)
         at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:467)
         at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:181)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:385)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:263)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:340)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:318)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:824)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:239)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:147)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
         at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged1(Native Method)
         at java.security.AccessController.doPrivileged(AccessController.java:321)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
    I'm stumped but I think it may have something to do with the exchangeProfile however I have had no success in attempting to resolve it.
    Any assistance is appreciated.
    Thanks and regards
    Conor

    This happened to me when I changed the following RFC connection on XI
    HTTP Connections to R/3 Ssytem --> INTEGRATION_DIRECTORY_HMI
    from
    under the path prefix
    /dir/hmi_cache_refresh_service/ext
    to
    /dir/CacheRefresh
    I believe the first path is for older versions while the second one is for newer versions.
    I started getting the error message, then I just changed it back and it was fixed, although I did need to restart the instace for each change to take effect.

  • Error HRWPC_FC_EXEC - could not start transaction

    Hi, am getting error when access MSS ePortal a particular transaction give me the error HRWPC_FC_EXEC - could not start transaction, and other transactions are working fine. Any one pls advise how to check and we miss anything? 
    thanks in advance.
    Regds

    Hello,
    Please set parameter  ~webgui_theme with value "sl" in the HRWPC_FC_EXEC service under GUI configuration. That you will find in the interactive options of service data.  After saving this service please also run the transaction SITSPMON -> Templates and Mimes -> go to "Invalidate cache" and select System wide/Application server.
    Hope it helps,
    Christine

  • Cannot start a global transaction. A LocalTransactionContainment is already

    Getting 'javax.transaction.NotSupportedException: java.lang.IllegalStateException: Cannot start a global transaction. A LocalTransactionContainment is already active with work.' while running the following code using XA datasource.
    Setup: WAS 5.0.2, TopLink 9.0.4.4, Oracle JDBC Driver (XA), Oralce9i database flatform, using external transaction controller.
    Code:
    SessionManager sm = SessionManager.getManager();
    Server serverSession = (Server)sm.getSession("PersistenceUnitTest");
    ClientSession clientSession = serverSession.acquireClientSession();
    int key = 1003;
    Customer customerPK = new Customer();
    customerPK.setId(new Integer(key));
    ReadObjectQuery query =
    new ReadObjectQuery(customerPK.getClass());
    query.setSelectionKey(clientSession.keyFromObject(customerPK));
    Customer customer = null;
    try {
    customer = (Customer)clientSession.executeQuery(query);
    } catch (Exception e) {
    clientSession.release();
    InitialContext ctx = new InitialContext();
    UserTransaction userTxn = (UserTransaction) ctx.lookup("java:comp/UserTransaction");
    try {
    userTxn.begin();
    userTxn.rollback();
    } catch (Exception e) {
    e.printStackTrace();
    } finally {
    clientSession.release();
    Trace:
    2005.03.14 01:04:57.452--ServerSession(863114877)--Thread[Servlet.Engine.Transports : 0,5,main]--client acquired
    2005.03.14 01:04:57.462--ServerSession(863114877)--Thread[Servlet.Engine.Transports : 0,5,main]--Connection(1731483245)--SELECT PERSON_TYPE, ID, GENDER, VERSION, LAST_NAME, FIRST_NAME, MIDDLE_INITIAL, HOME_ADDRESS_ID, PREFERRED_CUSTOMER, DISCOUNT_RATE, CONTACT_NUMBER, WORK_ADDRESS_ID FROM USER04.PERSON WHERE ((ID = ?) AND (PERSON_TYPE = ?))
         bind => [1003, C]
    [3/14/05 13:04:57:502 EST] 17d31642 SystemErr R javax.transaction.NotSupportedException: java.lang.IllegalStateException: Cannot start a global transaction. A LocalTransactionContainment is already active with work.
    [3/14/05 13:04:57:502 EST] 17d31642 SystemErr R      at com.ibm.ejs.jts.jta.UserTransactionImpl.begin(UserTransactionImpl.java:173)
    [3/14/05 13:04:57:502 EST] 17d31642 SystemErr R      at com.ford.it.persistence.impl.toplink.unittest.GlobalTransactionTest.testXA(GlobalTransactionTest.java:808)
    [3/14/05 13:04:57:502 EST] 17d31642 SystemErr R      at java.lang.reflect.Method.invoke(Native Method)
    [3/14/05 13:04:57:502 EST] 17d31642 SystemErr R      at junit.framework.TestCase.runTest(TestCase.java:154)
    [3/14/05 13:04:57:502 EST] 17d31642 SystemErr R      at junit.framework.TestCase.runBare(TestCase.java:127)
    [3/14/05 13:04:57:502 EST] 17d31642 SystemErr R      at org.apache.cactus.ServletTestCase.runCactusTest(ServletTestCase.java:295)
    [3/14/05 13:04:57:502 EST] 17d31642 SystemErr R      at org.apache.cactus.ServletTestCase.runBare(ServletTestCase.java:263)
    [3/14/05 13:04:57:502 EST] 17d31642 SystemErr R      at org.apache.cactus.server.AbstractWebTestCaller.doTest(AbstractWebTestCaller.java:156)
    [3/14/05 13:04:57:502 EST] 17d31642 SystemErr R      at org.apache.cactus.server.AbstractWebTestController.handleRequest_aroundBody0(AbstractWebTestController.java:130)
    [3/14/05 13:04:57:502 EST] 17d31642 SystemErr R      at org.apache.cactus.server.AbstractWebTestController.handleRequest_aroundBody1$advice(AbstractWebTestController.java:158)
    [3/14/05 13:04:57:502 EST] 17d31642 SystemErr R      at org.apache.cactus.server.AbstractWebTestController.handleRequest(AbstractWebTestController.java)
    [3/14/05 13:04:57:502 EST] 17d31642 SystemErr R      at org.apache.cactus.server.ServletTestRedirector.doPost_aroundBody2(ServletTestRedirector.java:138)
    [3/14/05 13:04:57:502 EST] 17d31642 SystemErr R      at org.apache.cactus.server.ServletTestRedirector.doPost_aroundBody3$advice(ServletTestRedirector.java:158)
    [3/14/05 13:04:57:502 EST] 17d31642 SystemErr R      at org.apache.cactus.server.ServletTestRedirector.doPost(ServletTestRedirector.java)
    [3/14/05 13:04:57:502 EST] 17d31642 SystemErr R      at org.apache.cactus.server.ServletTestRedirector.doGet_aroundBody0(ServletTestRedirector.java:109)
    [3/14/05 13:04:57:502 EST] 17d31642 SystemErr R      at org.apache.cactus.server.ServletTestRedirector.doGet_aroundBody1$advice(ServletTestRedirector.java:158)
    [3/14/05 13:04:57:502 EST] 17d31642 SystemErr R      at org.apache.cactus.server.ServletTestRedirector.doGet(ServletTestRedirector.java)
    [3/14/05 13:04:57:502 EST] 17d31642 SystemErr R      at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
    [3/14/05 13:04:57:502 EST] 17d31642 SystemErr R      at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    [3/14/05 13:04:57:512 EST] 17d31642 SystemErr R      at com.ibm.ws.webcontainer.servlet.StrictServletInstance.doService(StrictServletInstance.java:110)
    [3/14/05 13:04:57:512 EST] 17d31642 SystemErr R      at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet._service(StrictLifecycleServlet.java:174)
    [3/14/05 13:04:57:512 EST] 17d31642 SystemErr R      at com.ibm.ws.webcontainer.servlet.IdleServletState.service(StrictLifecycleServlet.java:313)
    [3/14/05 13:04:57:512 EST] 17d31642 SystemErr R      at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet.service(StrictLifecycleServlet.java:116)
    [3/14/05 13:04:57:512 EST] 17d31642 SystemErr R      at com.ibm.ws.webcontainer.servlet.ServletInstance.service(ServletInstance.java:283)
    [3/14/05 13:04:57:512 EST] 17d31642 SystemErr R      at com.ibm.ws.webcontainer.servlet.ValidServletReferenceState.dispatch(ValidServletReferenceState.java:42)
    [3/14/05 13:04:57:512 EST] 17d31642 SystemErr R      at com.ibm.ws.webcontainer.servlet.ServletInstanceReference.dispatch(ServletInstanceReference.java:40)
    [3/14/05 13:04:57:512 EST] 17d31642 SystemErr R      at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.handleWebAppDispatch(WebAppRequestDispatcher.java:948)
    [3/14/05 13:04:57:512 EST] 17d31642 SystemErr R      at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.dispatch(WebAppRequestDispatcher.java:530)
    [3/14/05 13:04:57:512 EST] 17d31642 SystemErr R      at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.forward(WebAppRequestDispatcher.java:176)
    [3/14/05 13:04:57:512 EST] 17d31642 SystemErr R      at com.ibm.ws.webcontainer.srt.WebAppInvoker.doForward(WebAppInvoker.java:79)
    [3/14/05 13:04:57:512 EST] 17d31642 SystemErr R      at com.ibm.ws.webcontainer.srt.WebAppInvoker.handleInvocationHook(WebAppInvoker.java:201)
    [3/14/05 13:04:57:512 EST] 17d31642 SystemErr R      at com.ibm.ws.webcontainer.cache.invocation.CachedInvocation.handleInvocation(CachedInvocation.java:71)
    [3/14/05 13:04:57:512 EST] 17d31642 SystemErr R      at com.ibm.ws.webcontainer.srp.ServletRequestProcessor.dispatchByURI(ServletRequestProcessor.java:182)
    [3/14/05 13:04:57:512 EST] 17d31642 SystemErr R      at com.ibm.ws.webcontainer.oselistener.OSEListenerDispatcher.service(OSEListener.java:334)
    [3/14/05 13:04:57:512 EST] 17d31642 SystemErr R      at com.ibm.ws.webcontainer.http.HttpConnection.handleRequest(HttpConnection.java:56)
    [3/14/05 13:04:57:512 EST] 17d31642 SystemErr R      at com.ibm.ws.http.HttpConnection.readAndHandleRequest(HttpConnection.java:610)
    [3/14/05 13:04:57:512 EST] 17d31642 SystemErr R      at com.ibm.ws.http.HttpConnection.run(HttpConnection.java:431)
    [3/14/05 13:04:57:512 EST] 17d31642 SystemErr R      at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:593)
    [3/14/05 13:04:57:492 EST] 17d31642 LocalTransact E WLTC0018E: Cannot begin a LocalTransactionContainment. A LocalTransactionContainment is already active.
    2005.03.14 01:04:57.512--ClientSession(1258968685)--Thread[Servlet.Engine.Transports : 0,5,main]--client released
    If we perform a query on a thread and then subsequently start a UserTransaction, we get the above failure on the begin() method of the UserTransaction
    Did anyone experience this before? Your inputs/comments are greatly appreciated.
    Haiwei

    James, thanks very much for your response.
    I hope you did not mis-understand my previous posts in this thread.
    In the example I provided, the database query was outside the UserTransaction. I could successfully perform rollback on an XA db connection after the query was executed. The rollback call cleans up the resources used in the local transaction that was created for the query; thus allows the UserTransaction to start following the query.
    The local transaction was created for the query because autoCommit property was false for XA datasource connections. If I set autoCommit to true after getting the connection from XA datasource, the query will finish with the commit of the local transaction that's created for the query. The WAS code appears to work correctly.
    If using non-XA datasource, the local transaction created for the query will be committed because the autoCommit is default to true for the non-XA connections.
    While using TopLink, there seems to be two options for solving my problem (which was stated at the begining of this thread):
    1) after the execution of a TopLink query, trap the connection.close() event and call the connection.rollback() before closing the connection to clean up the resources used in the local transaction; or
    2) trap the getConnection() event, and call conneciton.setAutoCommit(true) on the connection if the query is not part of the TopLink transaction or UserTransaction.
    I studied and experimented with the TopLink code. Option 1) is not do-able. After the execution of a TopLink qeury, TopLink's PreReleaseConnection event does not contain the connection that was used in the query. The connection was closed in the executeCall method of DatabaseAccessor.
    The postConnect event seems to provide some possibility of implementing option 2). However, when TopLink executes a query (at least, the ReadObjectQuery that I used in my testing), after getting a connection from DatabaseLogin, the executeCall method in DatabaseAccessoor never triggers the postConnect event.
    I posted a seperate note on the issue. Here is the link: postConnect event .
    or use a non-JTA DataSource for the TopLink session read login.<We use WAS connection pooling. Did you mean using non-XA datasource for TopLik read?
    your own TopLink ExternalConnectionPool subclass to workaround the issue<Could you elaborate the details? Or where can I find more information on the technique?
    Your help would be greatly appreciated.
    Haiwei
    Haiwei

  • Urgent: cannot start the shadow instance at phase STARTSAP_TRANS

    We are upgrading to NW2004s (ABAP only) from 640.
    <u><b>How to re-start the shadow instance?</b></u>
    At this point, <b>anyway we cannot start the shadow instance.</b>
    At SAPMMC, the disp+work
    1) first show "running but the dialog queue standstill"
    2) then show" running but not connected to the message server"
    3) then the disp+work dies.
    Above happens in 1 minute after re-start.
    <b>The dev_ms reads:
    trc file: "dev_ms", trc level: 1, release: "700"
    [Thr 4740] Mon Apr 02 15:07:53 2007
    [Thr 4740] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
    systemid   560 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    94
    intno      20050900
    make:      multithreaded, ASCII, optimized
    pid        2932
    [Thr 4740] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 2932) [msxxserv.c   1824]
    [Thr 4740] load acl file = D:\usr\sap\put\XYZ\SYS\global\ms_acl_info.DAT
    [Thr 4740] MsGetOwnIpAddr: my host addresses are :
    [Thr 4740]   1 : [10.10.10.68] houston (HOSTNAME)
    [Thr 4740]   2 : [127.0.0.1] houston.monet.local (LOCALHOST)
    [Thr 4740] Mon Apr 02 15:07:54 2007
    [Thr 4740] MsHttpInit: full qualified hostname = houston.monet.local
    [Thr 4740] HTTP logging is switch off
    [Thr 4740] MsHttpOwnDomain: own domain[1] = monet.local
    [Thr 4740] ms/icf_info_server : deleted
    [Thr 4740] *** I listen to port sapmsSHDXYZ (3660) ***
    [Thr 4740] CUSTOMER KEY: >B0790292062<
    [Thr 4740] Mon Apr 02 15:08:54 2007
    [Thr 4740] *** ERROR => MsSClientHandle: no server provides service ENQ  (4), requested from houston_XYZ_60 [msxxserv.c   4679]
    [Thr 4740] Mon Apr 02 15:19:35 2007
    [Thr 4740] *** ERROR => MsSCheckConnections: no response from client C0 (10.10.10.68) after 300 secs received [msxxserv.c   3165]
    [Thr 4740] *** ERROR => MsSCheckConnections: disconnect now [10.10.10.68] [msxxserv.c   3169]</b>
    The dev_disp reads:
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno      60
    sid        XYZ
    systemid   560 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    95
    intno      20050900
    make:      multithreaded, ASCII, optimized
    pid        4036
    Mon Apr 02 15:07:53 2007
    kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
    length of sys_adm_ext is 360 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (60 4036) [dpxxdisp.c   1239]
         shared lib "dw_xml.dll" version 95 successfully loaded
         shared lib "dw_xtc.dll" version 95 successfully loaded
         shared lib "dw_stl.dll" version 95 successfully loaded
         shared lib "dw_gui.dll" version 95 successfully loaded
         shared lib "dw_mdm.dll" version 95 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    Mon Apr 02 15:07:58 2007
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >houston_XYZ_60                         <
    DpShMCreate: sizeof(wp_adm)          19888     (904)
    DpShMCreate: sizeof(tm_adm)          3605136     (17936)
    DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
    DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
    DpShMCreate: sizeof(comm_adm)          528048     (1048)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0     (96)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1280)
    DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 05BF0040, size: 4240712)
    DpShMCreate: allocated sys_adm at 05BF0040
    DpShMCreate: allocated wp_adm at 05BF1A28
    DpShMCreate: allocated tm_adm_list at 05BF67D8
    DpShMCreate: allocated tm_adm at 05BF6808
    DpShMCreate: allocated wp_ca_adm at 05F66A98
    DpShMCreate: allocated appc_ca_adm at 05F6B0E8
    DpShMCreate: allocated comm_adm at 05F6C858
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 05FED708
    DpShMCreate: allocated gw_adm at 05FED748
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 05FED778
    DpShMCreate: allocated wall_adm at 05FED780
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation view
    <EsNT> Memory Reset disabled as NT default
    <ES> 2039 blocks reserved for free list.
    ES initialized.
    WARNING => System running without ICM - check rdisp/start_icman [dpxxdisp.c   12314]
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG Q0K=> DpMsAttach, mscon ( houston) [dpxxdisp.c   11663]
    DpStartStopMsg: send start message (myname is >houston_XYZ_60                         <)
    DpStartStopMsg: start msg sent
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 95
    Release check o.K.
    Mon Apr 02 15:08:38 2007
    ERROR => W0 (pid 1084) died [dpxxdisp.c   14318]
    ERROR => W1 (pid 4200) died [dpxxdisp.c   14318]
    ERROR => W2 (pid 3316) died [dpxxdisp.c   14318]
    ERROR => W3 (pid 5276) died [dpxxdisp.c   14318]
    ERROR => W4 (pid 5348) died [dpxxdisp.c   14318]
    ERROR => W5 (pid 3436) died [dpxxdisp.c   14318]
    ERROR => W6 (pid 3920) died [dpxxdisp.c   14318]
    ERROR => W7 (pid 4868) died [dpxxdisp.c   14318]
    ERROR => W8 (pid 5380) died [dpxxdisp.c   14318]
    ERROR => W9 (pid 4584) died [dpxxdisp.c   14318]
    my types changed after wp death/restart 0x1f --> 0x1e
    ERROR => W10 (pid 4188) died [dpxxdisp.c   14318]
    my types changed after wp death/restart 0x1e --> 0x1c
    ERROR => W11 (pid 2700) died [dpxxdisp.c   14318]
    my types changed after wp death/restart 0x1c --> 0x18
    ERROR => W12 (pid 4604) died [dpxxdisp.c   14318]
    ERROR => W13 (pid 4916) died [dpxxdisp.c   14318]
    ERROR => W14 (pid 4440) died [dpxxdisp.c   14318]
    ERROR => W15 (pid 4544) died [dpxxdisp.c   14318]
    ERROR => W16 (pid 1888) died [dpxxdisp.c   14318]
    ERROR => W17 (pid 548) died [dpxxdisp.c   14318]
    ERROR => W18 (pid 2800) died [dpxxdisp.c   14318]
    ERROR => W19 (pid 2080) died [dpxxdisp.c   14318]
    ERROR => W20 (pid 2888) died [dpxxdisp.c   14318]
    my types changed after wp death/restart 0x18 --> 0x10
    ERROR => W21 (pid 5572) died [dpxxdisp.c   14318]
    my types changed after wp death/restart 0x10 --> 0x0
    DP_FATAL_ERROR => DpWPCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=1609
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Apr 02 15:08:48 2007
    NiISelect: TIMEOUT occured (10000ms)
    dump system status
    Workprocess Table (long)               Mon Apr 02 20:08:48 2007
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program  Cl  User         Action                    Table
    0 DIA     1084 Ended         no      1   0             0                                                             
    1 DIA     4200 Ended         no      1   0             0                                                             
    2 DIA     3316 Ended         no      1   0             0                                                             
    3 DIA     5276 Ended         no      1   0             0                                                             
    4 DIA     5348 Ended         no      1   0             0                                                             
    5 DIA     3436 Ended         no      1   0             0                                                             
    6 DIA     3920 Ended         no      1   0             0                                                             
    7 DIA     4868 Ended         no      1   0             0                                                             
    8 DIA     5380 Ended         no      1   0             0                                                             
    9 DIA     4584 Ended         no      1   0             0                                                             
    10 UPD     4188 Ended         no      1   0             0                                                             
    11 ENQ     2700 Ended         no      1   0             0                                                             
    12 BTC     4604 Ended         no      1   0             0                                                             
    13 BTC     4916 Ended         no      1   0             0                                                             
    14 BTC     4440 Ended         no      1   0             0                                                             
    15 BTC     4544 Ended         no      1   0             0                                                             
    16 BTC     1888 Ended         no      1   0             0                                                             
    17 BTC      548 Ended         no      1   0             0                                                             
    18 BTC     2800 Ended         no      1   0             0                                                             
    19 BTC     2080 Ended         no      1   0             0                                                             
    20 BTC     2888 Ended         no      1   0             0                                                             
    21 SPO     5572 Ended         no      1   0             0                                                             
    Dispatcher Queue Statistics               Mon Apr 02 20:08:48 2007
    ===========================
    --------++++--
    +
    Typ
    now
    high
    max
    writes
    reads
    --------++++--
    +
    NOWP
    0
    1
    2000
    1
    1
    --------++++--
    +
    DIA
    3
    3
    2000
    3
    0
    --------++++--
    +
    UPD
    0
    0
    2000
    0
    0
    --------++++--
    +
    ENQ
    0
    0
    2000
    0
    0
    --------++++--
    +
    BTC
    0
    0
    2000
    0
    0
    --------++++--
    +
    SPO
    0
    0
    2000
    0
    0
    --------++++--
    +
    UP2
    0
    0
    2000
    0
    0
    --------++++--
    +
    max_rq_id          7
    wake_evt_udp_now     0
    wake events           total     3,  udp     3 (100%),  shm     0 (  0%)
    since last update     total     3,  udp     3 (100%),  shm     0 (  0%)
    Dump of tm_adm structure:               Mon Apr 02 20:08:48 2007
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    Workprocess Comm. Area Blocks               Mon Apr 02 20:08:48 2007
    =============================
    Slots: 300, Used: 1, Max: 0
    --------++--
    +
    id
    owner
    pid
    eyecatcher
    --------++--
    +
    0
    DISPATCHER
    -1
    WPCAAD000
    NiWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd=1609
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Apr 02 15:08:53 2007
    NiISelect: TIMEOUT occured (5000ms)
    DpHalt: shutdown server >houston_XYZ_60                         < (normal)
    DpJ2eeDisableRestart
    DpModState: buffer in state MBUF_PREPARED
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIModState: change state to SHUTDOWN
    DpModState: change server state from STARTING to SHUTDOWN
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    Stop work processes
    Stop gateway
    killing process (2072) (SOFT_KILL)
    Terminate gui connections
    wait for end of work processes
    wait for end of gateway
    [DpProcDied] Process lives  (PID:2072  HANDLE:1580)
    waiting for termination of gateway ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1609
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Apr 02 15:08:54 2007
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died  (PID:2072  HANDLE:1580)
    DpStartStopMsg: send stop message (myname is >houston_XYZ_60                         <)
    NiIMyHostName: hostname = 'houston'
    AdGetSelfIdentRecord: >                                                                           <
    XYZvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    XYZvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
    DpConvertRequest: net size = 189 bytes
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
    MsINiWrite: sent 562 bytes
    send msg (len 110+452) to name                    -, type 4, key -
    DpStartStopMsg: stop msg sent
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    NiIRead: read for hdl 2 timed out (0ms)
    DpHalt: no more messages from the message server
    DpHalt: send keepalive to synchronize with the message server
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
    MsINiWrite: sent 114 bytes
    send msg (len 110+4) to name           MSG_SERVER, type 0, key -
    MsSndName: MS_NOOP ok
    Send 4 bytes to MSG_SERVER
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    NiIPeek: peek successful for hdl 2 (r)
    NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=114
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 114 bytes
    MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
    Received 4 bytes from MSG_SERVER                             
    Received opcode MS_NOOP from msg_server, reply MSOP_OK
    MsOpReceive: ok
    MsSendKeepalive : keepalive sent to message server
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    Mon Apr 02 15:08:55 2007
    NiIPeek: peek for hdl 2 timed out (r; 1000ms)
    NiIRead: read for hdl 2 timed out (1000ms)
    DpHalt: no more messages from the message server
    DpHalt: sync with message server o.k.
    detach from message server
    ***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   11976]
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIDetach: send logout to msg_server
    MsIDetach: call exit function
    DpMsShutdownHook called
    NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
    SiSelNSet: set events of sock 1488 to: ---
    NiBufISelRemove: remove hdl 2 from set0
    SiSelNRemove: removed sock 1488 (pos=2)
    SiSelNRemove: removed sock 1488
    NiSelIRemove: removed hdl 2
    MBUF state OFF
    AdGetSelfIdentRecord: >                                                                           <
    XYZvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    XYZvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    XYZvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/22
    LOCK WP ca_blk 1
    make DISP owner of wp_ca_blk 1
    DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 9)
    MBUF component DOWN
    NiICloseHandle: shutdown and close hdl 2 / sock 1488
    NiBufIClose: clear extension for hdl 2
    MsIDetach: detach MS-system
    cleanup EM
    EsCleanup ....
    EmCleanup() -> 0
    Es2Cleanup: Cleanup ES2
    ***LOG Q05=> DpHalt, DPStop ( 4036) [dpxxdisp.c   10333]
    Good Bye .....
    <b>The dev_w21 reads:
    trc file: "dev_w21", trc level: 1, release: "700"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, MJ
    B 
    B Mon Apr 02 15:08:01 2007
    B  create_con (con_name=R/3)
    B  Loading DB library 'D:\usr\sap\put\exe\dbmssslib.dll' ...
    B  Library 'D:\usr\sap\put\exe\dbmssslib.dll' loaded
    B  Version of 'D:\usr\sap\put\exe\dbmssslib.dll' is "700.08", patchlevel (0.87)
    B  New connection 0 created
    M sysno      60
    M sid        XYZ
    M systemid   560 (PC with Windows NT)
    M relno      7000
    M patchlevel 0
    M patchno    95
    M intno      20050900
    M make:      multithreaded, ASCII, optimized
    M pid        5572
    M
    M  kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
    M  length of sys_adm_ext is 360 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc21 5572) [dpxxdisp.c   1301]
    I 
    I Mon Apr 02 15:08:02 2007
    I  MtxInit: 30000 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    M  DpShMCreate: sizeof(wp_adm)          19888     (904)
    M  DpShMCreate: sizeof(tm_adm)          3605136     (17936)
    M  DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
    M  DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
    M  DpShMCreate: sizeof(comm_adm)          528048     (1048)
    M  DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    M  DpShMCreate: sizeof(slock_adm)          0     (96)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    M  DpShMCreate: sizeof(file_adm)          0     (72)
    M  DpShMCreate: sizeof(vmc_adm)          0     (1280)
    M  DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
    M  DpShMCreate: sizeof(gw_adm)     48
    M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 063F0040, size: 4240712)
    M  DpShMCreate: allocated sys_adm at 063F0040
    M  DpShMCreate: allocated wp_adm at 063F1A28
    M  DpShMCreate: allocated tm_adm_list at 063F67D8
    M  DpShMCreate: allocated tm_adm at 063F6808
    M  DpShMCreate: allocated wp_ca_adm at 06766A98
    M  DpShMCreate: allocated appc_ca_adm at 0676B0E8
    M  DpShMCreate: allocated comm_adm at 0676C858
    M  DpShMCreate: system runs without slock table
    M  DpShMCreate: system runs without file table
    M  DpShMCreate: allocated vmc_adm_list at 067ED708
    M  DpShMCreate: allocated gw_adm at 067ED748
    M  DpShMCreate: system runs without vmc_adm
    M  DpShMCreate: allocated ca_info at 067ED778
    M  DpShMCreate: allocated wall_adm at 067ED780
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 21 initializing ....
    X  Using implementation view
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    M  ThInit: running on host houston
    M 
    M Mon Apr 02 15:08:03 2007
    M  calling db_connect ...
    C  Thread ID:4020
    C  Thank You for using the SLOLEDB-interface
    C  Using dynamic link library 'D:\usr\sap\put\exe\dbmssslib.dll'
    C  dbmssslib.dll patch info
    C    patchlevel   0
    C    patchno      87
    C    patchcomment MSSQL: UTAB/ATAB/Dynp-access via clientside cursor (1002914)
    C  np:(local) connection used on houston
    C  CopyLocalParameters: dbuser is 'XYZ_shd'
    C  Using Provider SQLNCLI
    C  OpenOledbConnection: MARS property was set successfully.
    C  Provider Release:9.00.1399.06
    C  Using Provider SQLNCLI
    C  OpenOledbConnection: MARS property was set successfully.
    C  Can't use MARS (on sql 8.0).  Reconnecting without MARS functionality.
    C  Using Provider SQLNCLI
    C  Provider Release:9.00.1399.06
    C  Using Provider SQLNCLI
    C  CheckCodepageType: line 24329. hr: 0x80040e37 Invalid object name 'DBPROPERTIES'.
    C  sloledb.cpp [CheckCodepageType,line 24329]: Error/Message: (err 208, sev 16), Invalid object name 'DBPROPERTIES'.
    C  Procname: [CheckCodepageType -- no proc]
    C  Cache sizes: header 52 bytes, 20000 names (26720000 bytes), 500 dynamic statements (2724000 bytes), total 29444052 bytes
    C  Initializing shared procedure name cache houston_XYZXYZ_XYZ_SHD_MEM.
    C  procedure cache created/attached
    C  PSP: 0 procedure names registered
    C  Connected to db server : [houston] server_used : [np:(local)], dbname: XYZ, dbuser: XYZ
    C  pn_id:houston_XYZXYZ_XYZ_SHD
    C  Not using MARS (on sql 8.0)
    B  Connection 0 opened (DBSL handle 0)
    B  Wp  Hdl ConName          ConId     ConState     TX  PRM RCT TIM MAX OPT Date     Time   DBHost         
    B  000 000 R/3              000000000 ACTIVE       NO  YES NO  000 255 255 20070402 150803 houston       
    C  The IRow interface is supported by this OLEDB provider
    C  sloledb.cpp [ParamStmtExec,line 12988]: Error/Message: (err 8180, sev 0), Statement(s) could not be prepared.
    C  Procname: [##YshoustonXYZ00000055720000000001150803]
    C  sloledb.cpp [ParamStmtExec,line 12988]: Error/Message: (err 208, sev 16), Invalid object name 'SVERS'.
    C  Procname: [##YshoustonXYZ00000055720000000001150803]
    C  ParamStmtExec failed.  HR 80040e14 DBSL retcode 103. stmt: [SELECT TOP      1 VERSION FROM SVERS ]
    C  Conn_i:1 selection:1 singleton:1 flag_fupd:0 use_cursor:0 chksum: 112156
    C  DbSlRead - Error 103 (dbcode 208) on open
    C  DbSlRead - <##YshoustonXYZ00000055720000000001150803>
    C  DbSlRead - Error 103 (dbcode 208) on fetch
    C  DbSlRead - <##YshoustonXYZ00000055720000000001150803>
    B  ***LOG BZA=> table SVERS      does not exist on database            [dblink#3 @ 1299] [dblink  1299 ]
    M  ***LOG R19=> ThInit, db_connect ( DB-Connect 004096) [thxxhead.c   1426]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10240]
    M 
    M  Info for wp 21
    M 
    M    stat = WP_RUN
    M    waiting_for = NO_WAITING
    M    reqtype = DP_RQ_SPOWP
    M    act_reqtype = NO_REQTYPE
    M    rq_info = 0
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = 65535
    M    rq_source =
    M    last_tid = 0
    M    last_mode = 0
    M    semaphore = 0
    M    act_cs_count = 0
    M    csTrack = 0
    M    csTrackRwExcl = 0
    M    csTrackRwShrd = 0
    M    control_flag = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M    vm = no VM
    M 
    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Server houston_XYZ_60 on host houston (wp 21)
    M  *  ERROR       ThInit: db_connect
    M  *
    M  *  TIME        Mon Apr 02 15:08:03 2007
    M  *  RELEASE     700
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          13
    M  *  MODULE      thxxhead.c
    M  *  LINE        10439
    M  *  COUNTER     1
    M  *
    M  *****************************************************************************
    M 
    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   720]
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  260]
    M  Entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workproc21 5572) [dpnttool.c   327]</b>
    On SDN there are many discussions about similar errors but none
    of them fits our situation.
    Please give your advice. Points will be given.
    Thanks!

    Target SAP system is ADC
    Enter the SAP instance number [59]:
    ? INSTANCE NUMBER   =
    Waiting for input since Mar 22, 2007 1:20:45 PM
    > INSTANCE NUMBER   =  59
    Type of database system is MSS
      >>>>>>>>>> Input Wizard <<<<<<<<<<
    Please enter up to 24 mount points for CDs.
    Enter at least the mount point for the CD titled "Upgrade Master CD/DVD"
    ? MOUNT POINT 01 =
    ? MOUNT POINT 02 =
    ? MOUNT POINT 03 =
    ? MOUNT POINT 04 =
    ? MOUNT POINT 05 =
    ? MOUNT POINT 06 =
    Please enter up to 24 mount points for CDs.
    Enter at least the mount point for the CD titled "Upgrade Master CD/DVD"
    ? MOUNT POINT 07 =
    ? MOUNT POINT 08 =
    ? MOUNT POINT 09 =
    ? MOUNT POINT 10 =
    ? MOUNT POINT 11 =
    ? MOUNT POINT 12 =
    Please enter up to 24 mount points for CDs.
    Enter at least the mount point for the CD titled "Upgrade Master CD/DVD"
    ? MOUNT POINT 13 =
    ? MOUNT POINT 14 =
    ? MOUNT POINT 15 =
    ? MOUNT POINT 16 =
    ? MOUNT POINT 17 =
    ? MOUNT POINT 18 =
    Please enter up to 24 mount points for CDs.
    Enter at least the mount point for the CD titled "Upgrade Master CD/DVD"
    ? MOUNT POINT 19 =
    ? MOUNT POINT 20 =
    ? MOUNT POINT 21 =
    ? MOUNT POINT 22 =
    ? MOUNT POINT 23 =
    ? MOUNT POINT 24 =
    Waiting for input since Mar 22, 2007 1:20:49 PM
    > MOUNT POINT 12 =  D:\D12\SAP_CRM_5.0_SR2_Installation_Export
    > MOUNT POINT 23 =  D:\D23\51032247
    > MOUNT POINT 18 =  D:\D18\NW_2004s_SR2_liveCache_7.6.00_Bd._29
    > MOUNT POINT 15 =  D:\D15\NW_2004s_SR2_Upgrade_Master
    > MOUNT POINT 09 =  D:\D9
    > MOUNT POINT 14 =  D:\D14\SAP_CRM_5.0_SR2_Installation_Export
    > MOUNT POINT 01 =  D:\D1\SAP_CRM_5.0_SR2_Upgrade_Export
    > MOUNT POINT 08 =  D:\D8\SAP_CRM_5.0_SR2_Languages
    > MOUNT POINT 20 =  D:\D20\NW_2004s_SR2_Languages
    > MOUNT POINT 03 =  C:\D3\SAP_CRM_5.0_SR2_Upgrade_Export
    > MOUNT POINT 06 =  C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86
    > MOUNT POINT 10 =  D:\D10
    > MOUNT POINT 17 =  D:\D17\51032257
    > MOUNT POINT 21 =  D:\D21\NW_2004s_SR2_Languages
    > MOUNT POINT 19 =  D:\D19\51032257
    > MOUNT POINT 05 =  C:\D5\SAP_CRM_5.0_SR2_Upgrade_Export
    > MOUNT POINT 04 =  C:\D4\SAP_CRM_5.0_SR2_Upgrade_Export
    > MOUNT POINT 11 =  D:\D11\SAP_CRM_5.0_SR2_Installation_Export
    > MOUNT POINT 07 =  D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master
    > MOUNT POINT 24 =  D:\D24
    > MOUNT POINT 02 =  C:\D2\SAP_CRM_5.0_SR2_Upgrade_Export
    > MOUNT POINT 22 =  D:\D22\NW_2004s_SR2_Languages
    > MOUNT POINT 16 =  D:\D16\BS_2005_SR2_SAP_Installation_Master
    > MOUNT POINT 13 =  D:\D13\SAP_CRM_5.0_SR2_Installation_Export
    Reading data from "Upgrade Master CD/DVD"...
    Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL7000.SAR" to "D:\usr\sap\put" ...
    Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL7000.SAR successfully unpacked to D:\usr\sap\put.
    Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL700X.SAR" to "D:\usr\sap\put" ...
    Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL700X.SAR successfully unpacked to D:\usr\sap\put.
    Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS.SAR" to "D:\usr\sap\put" ...
    Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS.SAR successfully unpacked to D:\usr\sap\put.
    Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS2.SAR" to "D:\usr\sap\put" ...
    Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS2.SAR successfully unpacked to D:\usr\sap\put.
    Welcome to the SAP upgrade control program.
    Important information for this upgrade is included
    in the upgrade Note and further Notes mentioned therein.
    Refer to the upgrade manual for the number of this note.
    It is advisable to obtain this Note before starting any process
    since it also contains important information about preparing
    the upgrade.
    It is essential that you get a current version of this Note
    before starting the upgrade with SAPup. It contains a keyword
    which is necessary to start the upgrade procedure.
    Please look into the SAP Service Marketplace or, if not available,
    use the form in your packet to request the upgrade Note.
    ? continue
    ? cancel
    Waiting for input since Mar 22, 2007 1:24:47 PM
    > cancel
    Connection to SAPup  was closed
    Target SAP system is ADC
    Enter the SAP instance number [59]:
    ? INSTANCE NUMBER   =
    Waiting for input since Mar 22, 2007 1:28:34 PM
    > INSTANCE NUMBER   =  59
    Type of database system is MSS
    Reading data from "Upgrade Master CD"...
    Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL7000.SAR" to "D:\usr\sap\put" ...
    Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL7000.SAR successfully unpacked to D:\usr\sap\put.
    Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL700X.SAR" to "D:\usr\sap\put" ...
    Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL700X.SAR successfully unpacked to D:\usr\sap\put.
    Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS.SAR" to "D:\usr\sap\put" ...
    Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS.SAR successfully unpacked to D:\usr\sap\put.
    Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS2.SAR" to "D:\usr\sap\put" ...
    Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS2.SAR successfully unpacked to D:\usr\sap\put.
    Welcome to the SAP upgrade control program.
    Important information for this upgrade is included
    in the upgrade Note and further Notes mentioned therein.
    Refer to the upgrade manual for the number of this note.
    It is advisable to obtain this Note before starting any process
    since it also contains important information about preparing
    the upgrade.
    It is essential that you get a current version of this Note
    before starting the upgrade with SAPup. It contains a keyword
    which is necessary to start the upgrade procedure.
    Please look into the SAP Service Marketplace or, if not available,
    use the form in your packet to request the upgrade Note.
    ? continue
    ? cancel
    Waiting for input since Mar 22, 2007 1:28:43 PM
    > continue
    SAP  UPGRADE  CONTROL  PROGRAM
    ================================
    This is SAPup version 7.00/2 upgrade to release
            500 of BBPCRM
            2005_1_700 of PI_BASIS
            700 of SAP_ABA
            700 of SAP_AP
            700 of SAP_BASIS
            700 of SAP_BW
            2005_1_700 of ST-PI
    Target SAP system is ADC, MSSQL database
    SAPup started in PREPARE mode.
    ? continue
    ? cancel
    Waiting for input since Mar 22, 2007 1:28:50 PM
    > continue
    The following options are available:
    select: Display screen for selecting PREPARE modules
    status: Display the statuses of the PREPARE modules
    exit:   Exit PREPARE
    help:   Getting help about PREPARE
    ? select
    ? status
    ? exit
    Waiting for input since Mar 22, 2007 1:28:54 PM
    > select
    Select the PREPARE modules
    ?                             name     status  mandatory
    ?                  Parameter input    initial        yes
    ?                   Initialization    initial        yes
    ?                           Import    initial        yes
    ?                        Extension    initial        yes
    ?                      Integration    initial        yes
    ?                     Installation    initial        yes
    ?                   General checks    initial        yes
    ?                Activation checks    initial        yes
    ? Necessary checks for conversions    initial        yes
    ?  Optional checks for conversions    initial         no
    ?             Modification support    initial         no
    ?                   Pre-processing    initial         no
    Waiting for input since Mar 22, 2007 1:28:56 PM
    >                  Parameter input    initial        yes
    You selected the following PREPARE modules:
    Parameter input
    execute: Execute the selected PREPARE modules.
             Make sure that you have carried out the actions described in
             D:\usr\sap\put\log\CHECKS.LOG before continuing.
             (Note: The contents of file CHECKS.LOG are saved
              in D:\usr\sap\put\log\CHECKS.SAV)
    select:  Display screen for selecting PREPARE modules.
    exit:    Exit PREPARE.
    help:    Getting help about PREPARE modules.
    ? execute
    ? select
    ? exit
    Waiting for input since Mar 22, 2007 1:28:59 PM
    > execute
    Execution of PREPARE module Parameter input begins at 20070322142901
    >> 14:29:01  PREPARE: START OF PHASE BEGIN_PRE
    Generating html phase list files 'phase_toc.html' and 'phaselist.html'
    >> 14:29:01  PREPARE: END OF PHASE   BEGIN_PRE
    >> 14:29:01  PREPARE: START OF PHASE KEY_CHK
    Correction package 'D:\usr\sap\put\FIX_CRM50SR2.UPG' found, extracting to 'D:\usr\sap\put'
    Archive successfully unpacked.
    Enter the SAPup keyword of note 961511
    ? SAPup keyword =
    Waiting for input since Mar 22, 2007 1:29:02 PM
    > SAPup keyword = 19327784
    >> 14:37:23  PREPARE: END OF PHASE   KEY_CHK
    >> 14:37:23  PREPARE: START OF PHASE EXTRACTKRN_PRE
    Extracting archive "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPMMC.SAR" to "D:\usr\sap\put\exe" ...
    Archive C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPMMC.SAR successfully unpacked to D:\usr\sap\put\exe.
    Copying file "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\UNINSTSAP.EXE" to "D:\usr\sap\put\exe" ...
    Done.
    Extracting archive "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPEXE.SAR" to "D:\usr\sap\put\exe" ...
    Archive C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPEXE.SAR successfully unpacked to D:\usr\sap\put\exe.
    Extracting archive "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\MSS\SAPEXEDB.SAR" to "D:\usr\sap\put\exe" ...
    Archive C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\MSS\SAPEXEDB.SAR successfully unpacked to D:\usr\sap\put\exe.
    Copying file "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\IGSEXE.SAR" to "D:\usr\sap\put\exe" ...
    Done.
    Copying file "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\IGSHELPER.SAR" to "D:\usr\sap\put\exe" ...
    Done.
    Extracting archive "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPMMC.SAR" to "D:\usr\sap\put\exenew" ...
    Archive C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPMMC.SAR successfully unpacked to D:\usr\sap\put\exenew.
    Copying file "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\UNINSTSAP.EXE" to "D:\usr\sap\put\exenew" ...
    Done.
    Extracting archive "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPEXE.SAR" to "D:\usr\sap\put\exenew" ...
    Archive C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPEXE.SAR successfully unpacked to D:\usr\sap\put\exenew.
    Extracting archive "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\MSS\SAPEXEDB.SAR" to "D:\usr\sap\put\exenew" ...
    Archive C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\MSS\SAPEXEDB.SAR successfully unpacked to D:\usr\sap\put\exenew.
    Copying file "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\IGSEXE.SAR" to "D:\usr\sap\put\exenew" ...
    Done.
    Copying file "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\IGSHELPER.SAR" to "D:\usr\sap\put\exenew" ...
    Done.
    >> 14:40:10  PREPARE: END OF PHASE   EXTRACTKRN_PRE
    >> 14:40:10  PREPARE: START OF PHASE INITPUT_PRE
    Supply the following information:
    Confirm the name of your SAP system:
    ? SAP SYSTEM ID     =
    The hostname of your central SAP server:
    ? SAP SYSTEM HOST   =
    Enter the SAP instance number:
    ? INSTANCE NUMBER   =
    Waiting for input since Mar 22, 2007 1:40:10 PM
    > INSTANCE NUMBER   =  59
    > SAP SYSTEM HOST   =  damascus
    > SAP SYSTEM ID     =  ADC
    The system identifier of your database:
    ? DATABASE ID       =
    The hostname of your database server:
    ? DATABASE HOST     =
    Waiting for input since Mar 22, 2007 1:43:59 PM
    > DATABASE HOST     =  damascus
    > DATABASE ID       =  ADC
    Executing script MSSCONCHECK ...
    Supply the following information:
    The password for SAP user DDIC in client 000
    (may be 19920706):
    ? DDIC PASSWORD  =
    Verify password for SAP user DDIC:
    ? DDIC PASSWORD  =
    Waiting for input since Mar 22, 2007 1:44:03 PM
    > DDIC PASSWORD  =  <hidden input>
    > DDIC PASSWORD  =  <hidden input>
    The hostname of your batch server:
    ? BATCH HOST        =
    Waiting for input since Mar 22, 2007 1:44:14 PM
    > BATCH HOST        =  damascus
    Supply the following information:
    The maximum number of parallel processes during uptime:
    ? MAXIMUM UPTIME PROCESSES =
    The number of parallel import processes:
    ? R3TRANS PROCESSES =
    The maximum profile value of "bufreftime":
    ? MAXIMUM SYNC TIME =
    Waiting for input since Mar 22, 2007 1:44:16 PM
    > R3TRANS PROCESSES =  3
    > MAXIMUM SYNC TIME =  120
    > MAXIMUM UPTIME PROCESSES =  1
    The password for Operating System account .\SAPServiceADC:
    ? PASSWORD  =
    Verification of the password for Operating System account .\SAPServiceADC:
    ? PASSWORD  =
    Waiting for input since Mar 22, 2007 1:44:19 PM
    > PASSWORD  =  <hidden input>
    > PASSWORD  =  <hidden input>
    running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
    Executing script MSSUPGSPS ...
    Executing script MSSINCHK ...
    >> 14:44:43  PREPARE: END OF PHASE   INITPUT_PRE
    >> 14:44:43  PREPARE: START OF PHASE DBCHK_PRE
    running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
    running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
    running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
    Is there more than one system running in this database?
    (MCOD: Multiple components in one database)
    ? no
    ? yes
    Waiting for input since Mar 22, 2007 1:44:45 PM
    > no
    >> 14:44:49  PREPARE: END OF PHASE   DBCHK_PRE
    >> 14:44:49  PREPARE: START OF PHASE CONFCHK_IMP
    running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
    running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
    >> 14:44:50  PREPARE: END OF PHASE   CONFCHK_IMP
    >> 14:44:50  PREPARE: START OF PHASE SOLMAN_CHK
    The SAP Solution Manager Key is required for the upgrade.
    Further informations can be found in the upgrade guide,
    the SAP Service Marketplace and SAP note 805390!
    ? continue
    ? cancel
    Waiting for input since Mar 22, 2007 1:44:50 PM
    > continue
    ? SAP Solution Manager Key =
    Waiting for input since Mar 22, 2007 1:44:53 PM
    > SAP Solution Manager Key = 12D8B10981
    >> 14:45:14  PREPARE: END OF PHASE   SOLMAN_CHK
    >> 14:45:14  PREPARE: START OF PHASE CHKSYSTYPE
    >> 14:45:14  PREPARE: END OF PHASE   CHKSYSTYPE
    >> 14:45:14  PREPARE: START OF PHASE HIAV_CHK
    >> 14:45:14  PREPARE: END OF PHASE   HIAV_CHK
    >> 14:45:15  PREPARE: START OF PHASE J2EE_CHK1
    >> 14:45:15  PREPARE: END OF PHASE   J2EE_CHK1
    >> 14:45:15  PREPARE: START OF PHASE REQ_J2EEUPG
    >> 14:45:15  PREPARE: END OF PHASE   REQ_J2EEUPG
    >> 14:45:15  PREPARE: START OF PHASE SETSYNC_PREP_STARTED
    >> 14:45:15  PREPARE: END OF PHASE   SETSYNC_PREP_STARTED
    >> 14:45:15  PREPARE: START OF PHASE REQ_READNOTE
    >> 14:45:15  PREPARE: END OF PHASE   REQ_READNOTE
    >> 14:45:15  PREPARE: START OF PHASE INIT_CBU
    >> 14:45:15  PREPARE: END OF PHASE   INIT_CBU
    >> 14:45:15  PREPARE: START OF PHASE CHECKGROUP_END0
    Execution of PREPARE module Parameter input ends at 20070322144515
    Execution of the selected PREPARE modules finished
    with the statuses as follows:
    'Parameter input'  status: succeeded
    Please see file D:\usr\sap\put\log\CHECKS.LOG
    for the actions which have to be performed.
    ? continue
    ? cancel
    Waiting for input since Mar 22, 2007 1:45:15 PM
    > continue
    The following options are available:
    select: Display screen for selecting PREPARE modules
    status: Display the statuses of the PREPARE modules
    exit:   Exit PREPARE
    help:   Getting help about PREPARE
    ? select
    ? status
    ? exit
    Waiting for input since Mar 22, 2007 1:45:23 PM
    > select
    Select the PREPARE modules
    ?                             name     status  mandatory
    ?                  Parameter input  succeeded        yes
    ?                   Initialization    initial        yes
    ?                           Import    initial        yes
    ?                        Extension    initial        yes
    ?                      Integration    initial        yes
    ?                     Installation    initial        yes
    ?                   General checks    initial        yes
    ?                Activation checks    initial        yes
    ? Necessary checks for conversions    initial        yes
    ?  Optional checks for conversions    initial         no
    ?             Modification support    initial         no
    ?                   Pre-processing    initial         no
    Waiting for input since Mar 22, 2007 1:45:26 PM
    >                   Initialization    initial        yes
    You selected the following PREPARE modules:
    Initialization
    execute: Execute the selected PREPARE modules.
             Make sure that you have carried out the actions described in
             D:\usr\sap\put\log\CHECKS.LOG before continuing.
             (Note: The contents of file CHECKS.LOG are saved
              in D:\usr\sap\put\log\CHECKS.SAV)
    select:  Display screen for selecting PREPARE modules.
    exit:    Exit PREPARE.
    help:    Getting help about PREPARE modules.
    ? execute
    ? select
    ? exit
    ? display CHECKS.LOG
    Waiting for input since Mar 22, 2007 1:45:30 PM
    > execute
    Execution of PREPARE module Initialization begins at 20070322144532
    >> 14:45:32  PREPARE: START OF PHASE INITCURENV
    >> 14:45:32  PREPARE: END OF PHASE   INITCURENV
    >> 14:45:32  PREPARE: START OF PHASE DBCHK_INI
    running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
    running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
    running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
    >> 14:45:34  PREPARE: END OF PHASE   DBCHK_INI
    >> 14:45:34  PREPARE: START OF PHASE RFCCHK_INI
    >> 14:45:34  PREPARE: END OF PHASE   RFCCHK_INI
    >> 14:45:34  PREPARE: START OF PHASE VERSCHK_INI
    >> 14:45:34  PREPARE: END OF PHASE   VERSCHK_INI
    >> 14:45:34  PREPARE: START OF PHASE VALCHK_INI
    >> 14:45:35  PREPARE: END OF PHASE   VALCHK_INI
    >> 14:45:35  PREPARE: START OF PHASE TOOLVERSION_INI
    >> 14:45:36  PREPARE: END OF PHASE   TOOLVERSION_INI
    >> 14:45:36  PREPARE: START OF PHASE UNICODE_CHK_PRE
    >> 14:45:36  PREPARE: END OF PHASE   UNICODE_CHK_PRE
    >> 14:45:36  PREPARE: START OF PHASE TOOLVERSION_UPG1
    >> 14:46:00  PREPARE: END OF PHASE   TOOLVERSION_UPG1
    >> 14:46:00  PREPARE: START OF PHASE DBCONNCHK_INI
    Checking DB connect with 'D:\usr\sap\put\exe\R3trans.exe'.
    >> 14:46:00  PREPARE: END OF PHASE   DBCONNCHK_INI
    >> 14:46:00  PREPARE: START OF PHASE SETSYNC_INFO_FINISHED
    >> 14:46:00  PREPARE: END OF PHASE   SETSYNC_INFO_FINISHED
    >> 14:46:00  PREPARE: START OF PHASE UCMIG_DECISION
    Your system is configured as a non-Unicode SCP (Single Code Page) configuration.
    If you plan to perform a Unicode Conversion after the upgrade, you may choose to perform a combined
    Upgrade and Unicode Conversion.
    In this case, several of the migration preparation steps can be done already on the start release
    or on the upgrade shadow system.
    For further information, please refer to OSS note 928729.
    Do you want to perform a combined Upgrade and Unicode Conversion?
    ? Yes
    ? No
    Waiting for input since Mar 22, 2007 1:46:06 PM
    > No
    >> 14:48:04  PREPARE: END OF PHASE   UCMIG_DECISION
    >> 14:48:04  PREPARE: START OF PHASE CLNT_CHK_INI
    >> 14:48:09  PREPARE: END OF PHASE   CLNT_CHK_INI
    >> 14:48:09  PREPARE: START OF PHASE PATCH_CHK1
    >> 14:48:15  PREPARE: END OF PHASE   PATCH_CHK1
    >> 14:48:15  PREPARE: START OF PHASE INTCHK_INI
    running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getddxttent ADC
    running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getddxtfent ADC
    >> 14:48:15  PREPARE: END OF PHASE   INTCHK_INI
    >> 14:48:15  PREPARE: START OF PHASE ADJ_CNTRANS
    Calling R3trans to import 'RSUPDTEC.60X'.
    Waiting 130 seconds for buffer synchronization ...
    working ...
    >> 14:50:38  PREPARE: END OF PHASE   ADJ_CNTRANS
    >> 14:50:38  PREPARE: START OF PHASE INIT_CNTRANS
    >> 14:50:38  PREPARE: END OF PHASE   INIT_CNTRANS
    >> 14:50:38  PREPARE: START OF PHASE CNTRANS_PRE
    >> 14:50:38  PREPARE: END OF PHASE   CNTRANS_PRE
    >> 14:50:38  PREPARE: START OF PHASE DMPSPC_INI
    >> 14:50:38  PREPARE: END OF PHASE   DMPSPC_INI
    >> 14:50:38  PREPARE: START OF PHASE JOB_RSDB4090
    >> 14:50:38  PREPARE: END OF PHASE   JOB_RSDB4090
    >> 14:50:38  PREPARE: START OF PHASE CHK_DB6_REG_PRE
    >> 14:50:38  PREPARE: END OF PHASE   CHK_DB6_REG_PRE
    >> 14:50:39  PREPARE: START OF PHASE CHK_DB6_PAR_INI
    >> 14:50:39  PREPARE: END OF PHASE   CHK_DB6_PAR_INI
    >> 14:50:39  PREPARE: START OF PHASE SPACECHK_INI
    Executing script MSSSPACE ...
    >> 14:50:39  PREPARE: END OF PHASE   SPACECHK_INI
    >> 14:50:39  PREPARE: START OF PHASE KRNCHK_DEST
    >> 14:50:39  PREPARE: END OF PHASE   KRNCHK_DEST
    >> 14:50:39  PREPARE: START OF PHASE DBPREP_CHK
    >> 14:50:39  PREPARE: END OF PHASE   DBPREP_CHK
    >> 14:50:39  PREPARE: START OF PHASE EXECCV
    >> 14:50:44  PREPARE: END OF PHASE   EXECCV
    >> 14:50:44  PREPARE: START OF PHASE EXECAV
    >> 14:50:50  PREPARE: END OF PHASE   EXECAV
    >> 14:50:50  PREPARE: START OF PHASE COMPINFO_INI
    >> 14:50:50  PREPARE: END OF PHASE   COMPINFO_INI
    >> 14:50:50  PREPARE: START OF PHASE ADDON_CHK
    >> 14:50:50  PREPARE: END OF PHASE   ADDON_CHK
    >> 14:50:50  PREPARE: START OF PHASE ADDON_INFO
    >> 14:50:50  PREPARE: END OF PHASE   ADDON_INFO
    >> 14:50:50  PREPARE: START OF PHASE ADDON_SPEC1
    >> 14:50:55  PREPARE: END OF PHASE   ADDON_SPEC1
    >> 14:50:56  PREPARE: START OF PHASE ADDON_TREAS
    >> 14:50:56  PREPARE: END OF PHASE   ADDON_TREAS
    >> 14:50:56  PREPARE: START OF PHASE ADDON_WFM
    >> 14:51:01  PREPARE: END OF PHASE   ADDON_WFM
    >> 14:51:01  PREPARE: START OF PHASE ADDON_DMC
    >> 14:51:01  PREPARE: END OF PHASE   ADDON_DMC
    >> 14:51:01  PREPARE: START OF PHASE ACE_CHK
    >> 14:51:01  PREPARE: END OF PHASE   ACE_CHK
    >> 14:51:02  PREPARE: START OF PHASE CRM_BILL
    >> 14:51:02  PREPARE: END OF PHASE   CRM_BILL
    >> 14:51:02  PREPARE: START OF PHASE PR_DBPAR
    >> 14:51:02  PREPARE: END OF PHASE   PR_DBPAR
    >> 14:51:02  PREPARE: START OF PHASE CHECKGROUP_END1
    Execution of PREPARE module Initialization ends at 20070322145102
    Execution of the selected PREPARE modules finished
    with the statuses as follows:
    'Initialization'  status: succeeded
    Please see file D:\usr\sap\put\log\CHECKS.LOG
    for the actions which have to be performed.
    ? continue
    ? cancel
    Waiting for input since Mar 22, 2007 1:51:02 PM
    > continue
    The following options are available:
    select: Display screen for selecting PREPARE modules
    status: Display the statuses of the PREPARE modules
    exit:   Exit PREPARE
    help:   Getting help about PREPARE
    ? select
    ? status
    ? exit
    Waiting for input since Mar 22, 2007 1:51:41 PM
    > continue
    Select the PREPARE modules
    ?                             name     status  mandatory
    ?                  Parameter input  succeeded        yes
    ?                   Initialization  succeeded        yes
    ?                           Import    initial        yes
    ?                        Extension    initial        yes
    ?                      Integration    initial        yes
    ?                     Installation    initial        yes
    ?                   General checks    initial        yes
    ?                Activation checks    initial        yes
    ? Necessary checks for conversions    initial        yes
    ?  Optional checks for conversions    initial         no
    ?             Modification support    initial         no
    ?                   Pre-processing    initial         no
    Waiting for input since Mar 22, 2007 1:51:41 PM
    SAP  UPGRADE  CONTROL  PROGRAM
    ================================
    This is SAPup version 7.00/2 upgrade to release
            500 of BBPCRM
            2005_1_700 of PI_BASIS
            700 of SAP_ABA
            700 of SAP_AP
            700 of SAP_BASIS
            700 of SAP_BW
            2005_1_700 of ST-PI
    Target SAP system is ADC, MSSQL database
    SAPup started in PREPARE mode.
    ? continue
    ? cancel
    Waiting for input since Mar 22, 2007 1:58:46 PM
    > continue
    The following options are available:
    select: Display screen for selecting PREPARE modules
    status: Display the statuses of the PREPARE modules
    exit:   Exit PREPARE
    help:   Getting help about PREPARE
    ? select
    ? status
    ? exit
    Waiting for input since Mar 22, 2007 1:58:53 PM
    > select
    Select the PREPARE modules
    ?                             name     status  mandatory
    ?                  Parameter input  succeeded        yes
    ?                   Initialization  succeeded        yes
    ?                           Import    initial        yes
    ?                        Extension    initial        yes
    ?                      Integration    initial        yes
    ?                     Installation    initial        yes
    ?                   General checks    initial        yes
    ?                Activation checks    initial        yes
    ? Necessary checks for conversions    initial        yes
    ?  Optional checks for conversions    initial         no
    ?             Modification support    initial         no
    ?                   Pre-processing    initial         no
    Waiting for input since Mar 22, 2007 1:58:56 PM
    >                           Import    initial        yes
    You selected the following PREPARE modules:
    Import
    execute: Execute the selected PREPARE modules.
             Make sure that you have carried out the actions described in
             D:\usr\sap\put\log\CHECKS.LOG before continuing.
             (Note: The contents of file CHECKS.LOG are saved
              in D:\usr\sap\put\log\CHECKS.SAV)
    select:  Display screen for selecting PREPARE modules.
    exit:    Exit PREPARE.
    help:    Getting help about PREPARE modules.
    ? execute
    ? select
    ? exit
    ? display CHECKS.LOG
    Waiting for input since Mar 22, 2007 1:59:00 PM
    > execute
    Execution of PREPARE module Import begins at 20070322145902
    >> 14:59:02  PREPARE: START OF PHASE REQIMPORT
           The PREPARE module Import will be started now.
    During this module programs, structures, and table entries
    required by PREPARE are imported (the socalled "tool import").
    Note: This can cause a loss of performance in R/3
    In rare cases, a concurrent transport via the transport directory
    may disturb the tool import. Please avoid any concurrent import
    during this PREPARE module.
    ? continue
    ? cancel
    Waiting for input since Mar 22, 2007 1:59:02 PM
    > continue
    >> 14:59:05  PREPARE: END OF PHASE   REQIMPORT
    >> 14:59:05  PREPARE: START OF PHASE READDATA
    Trying to find archive files ...
    Extracting archive "D:\D1\SAP_CRM_5.0_SR2_Upgrade_Export\UPG1\DBINDEP\MISC7000.SAR" to "D:\usr\sap\put" ...
    Archive D:\D1\SAP_CRM_5.0_SR2_Upgrade_Export\UPG1\DBINDEP\MISC7000.SAR successfully unpacked to D:\usr\sap\put.
    Extracting archive "D:\D1\SAP_CRM_5.0_SR2_Upgrade_Export\UPG1\DBINDEP\MISC700X.SAR" to "D:\usr\sap\put" ...
    Archive D:\D1\SAP_CRM_5.0_SR2_Upgrade_Export\UPG1\DBINDEP\MISC700X.SAR successfully unpacked to D:\usr\sap\put.
    Extracting archive "D:\D1\SAP_CRM_5.0_SR2_Upgrade_Export\UPG1\DBINDEP\MISC_SP.SAR" to "D:\usr\sap\put" ...
    Archive D:\D1\SAP_CRM_5.0_SR2_Upgrade_Export\UPG1\DBINDEP\MISC_SP.SAR successfully unpacked to D:\usr\sap\put.
    Trying to find archive files ...
    Extracting archive "C:\D2\SAP_CRM_5.0_SR2_Upgrade_Export\UPG2\DBINDEP\MISC700I.SAR" to "D:\usr\sap\put" ...
    Archive C:\D2\SAP_CRM_5.0_SR2_Upgrade_Export\UPG2\DBINDEP\MISC700I.SAR successfully unpacked to D:\usr\sap\put.
    >> 14:59:40  PREPARE: END OF PHASE   READDATA
    >> 14:59:40  PREPARE: START OF PHASE READDATA_EXT
    Trying to find archive files ...
    >> 14:59:41  PREPARE: END OF PHASE   READDATA_EXT
    >> 14:59:41  PREPARE: START OF PHASE TOOLFIX_CHK
    Correction package 'D:\usr\sap\put\FIX_CRM50SR2.UPG' found, extracting to 'D:\usr\sap\put'
    Archive successfully unpacked.
    >> 14:59:42  PREPARE: END OF PHASE   TOOLFIX_CHK
    >> 14:59:42  PREPARE: START OF PHASE CPYFIL0_CBU
    >> 14:59:42  PREPARE: END OF P

  • IDX5 - System is not a central XI; cannot start program

    hi all -
    Did anyone come across this error message - "System is not a central XI; cannot start program" when trying to execute the tcode - IDX5 on the XI box?
    I pushed an IDOC - MATMAS05 from IDOC to XI. It doesn't come into XI.
    1. I checked the SM58 on the R/3 side. No Messages.
    2. I checked the IDX5 transaction on the XI side, that's when i get the above error message.
    3. I checked the IDX2 transaction on the XI side, i get this error "I:000" - Anyone knows what it means?
    4. SXMB_MONI doesn't show up anything.
    5. R/3 - pushed idocs shows a status of 3.
    Any ideas where to look for and how to solve the problem -IDX5 and IDX2.
    Environment:
    1. We are using SAP NW 2004s
    2. SAP BASIS Component - SAP_BASIS - Release 7.00
    Thanks in advance,
    Tirumal

    Hi,
    I think port configuration in IDX1 may be not correct,
    Anyway check out this SAP note- 940313
    Also refer this analysis:
    http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
    Regards,
    Moorthy

  • SRM Error : Could not start transaction.

    The user want to approve the SC and is getting the error
    "Cannot Start the Transaction"
    "Return data for Work Item could not be read"
    Please let me know how to fix this issue.

    Hi,
    Are there any dumps? What version of SRM are you using?
    Regards,
    Prasanna

  • EXCEPTION: ORA-22990: LOB LOCATORS CANNOT SPAN TRANSACTIONS

    We hit a brand new BPEL error during Volume Test:
    EXCEPTION: ORA-22990: LOB LOCATORS CANNOT SPAN TRANSACTIONS
    Anyone seen this ? The OC4J BPEL java process started to consume vast amounts of CPU but I'm not sure if this was the cause of effect. I'm sort of hoping it was the result of this error - if it isn't we have another root cause to try and figure out! We're using BPEL 10.1.2.0.2.
    Rob J

    sorry for the delay, i was not checking the otn forum for a while.
    Do you see any other errors before this LOB errors in the log file? This is important, you should see some errors (e.g. cmt error or some other error related to jta transaction)
    we had this lob locater issue in 10.1.2.0.0 and a mandatory oc4j patch is available for 10.1.2.0.0.
    But if you are using 10.1.2.0.2 the patch should be included but i suspect the patch is not taking effect because patch gets applied after the bpel ejb-bean class generation.
    the solution
    -remove the application-deployments/orabpel directory completely (just to be safe...please backup before delete)
    - restart the server with -DKeepWrapperCode=true system property in opmn.xml for OC4J_BPEL, this flag would generate stub .java files under j2ee/home or j2ee/home/application-deployments/orabpel/generated directory
    - please upload these regenerated java files to SR
    this will force to regenerate the bpel ejb stub classes which should fix this issue.

  • Reg:"System is not a central XI;cannot start program" Err

    Hi..
    I am trying to execute the transaction IDX5 on XI system and am getting the err "System is not a central XI;cannot start program".Can anyone please tell me the reason for this?

    Are you sure that you are executing TCODE on XI Server.
    Normally this message is displayed for R3 Servers
    Check SXMB_ADM --> Check the Integration Engine Configuration
    In the Global Configuration Data :
    Role of Business System should be Integration server
    Corresponding IS  should point to Pipeline URL
    regards
    Gangaprasad
    Edited by: gangaprasad chintala on Nov 18, 2008 3:26 PM

  • Docking Station ACPI\DOCKDEVICE\_SB.GDCK This device cannot start.

    Since allowing TVSU to update "Lenovo Settings Dependency Package 8 [32, 64]" to version 1.2.5.8 yesterday, LSC and Device Manager complain about a problem with this device:
    Device ACPI\DockDevice\_SB.GDCK was configured.
    Driver Name: machine.inf
    Class GUID: {4D36E97D-E325-11CE-BFC1-08002BE10318}
    Driver Date: 06/21/2006
    Driver Version: 6.2.9200.16384
    Driver Provider: Microsoft
    Driver Section: NO_DRV
    Driver Rank: 0xFF0001
    Matching Device ID: ACPI\DockDevice
    Outranked Drivers:
    Device Updated: false
    Although there are no corresponding errors in Windows Event Viewer, both MSINFO32 and Device Manager show this message:
    Docking Station ACPI\DOCKDEVICE\_SB.GDCK This device cannot start.
     Oddly enough, Device Manager now shows 2 entries named "Docking Station", although I can only recall seeing one before.  The second one (which does not indicate any problems) looks like this:
    Device ACPI\IBM0079\0 was configured.
    Driver Name: machine.inf
    Class GUID: {4D36E97D-E325-11CE-BFC1-08002BE10318}
    Driver Date: 06/21/2006
    Driver Version: 6.2.9200.16384
    Driver Provider: Microsoft
    Driver Section: NO_DRV
    Driver Rank: 0xFF2000
    Matching Device ID: *PNP0C15
    Outranked Drivers:
    Device Updated: false
     Although driver versions are listed above, when I try to access "Driver Details" in Device Manager, it claims (for both devices) that no driver is installed.
    Nonetheless, the update appears to have installed a driver:
    Driver Management concluded the process to install driver pmvuddrv.inf_amd64_2526415e83dcbc7a\pmvuddrv.inf for Device Instance ID ROOT\SYSTEM\0001 with the following status: 0x0.
     and a service:
    A service was installed in the system.
    Service Name: Power Manager DBC Service
    Service File Name: "C:\Program Files (x86)\ThinkPad\Utilities\PWMDBSVC.EXE"
    Service Type: user mode service
    Service Start Type: demand start
    Service Account: LocalSystem
     as indicated by the above messages in Event Viewer.
    Is there a known problem with this update?
    Shoudl  I roll it back?
    Is there a more elegant way to resolve this?
    P.S. Since the update of the Dependency Settings Package, these previously appearing error messages have stopped appearing in the Event. Viewer:
    A timeout (30000 milliseconds) was reached while waiting for a transaction response from the Lenovo Settings Service service.
     However, there are now warnings like these:
    The driver \Driver\WudfRd failed to load for the device ROOT\WPD\0000.
    The UMDF reflector was unable to complete startup because the WUDFPf service was not found. This service may be started later during boot, at which point Windows will attempt to start the device again.
    The driver \Driver\WUDFRd failed to load for the device ROOT\SYSTEM\0001.
    The UMDF reflector was unable to complete startup because the WUDFPf service was not found. This service may be started later during boot, at which point Windows will attempt to start the device again.
    The driver \Driver\WUDFRd failed to load for the device ROOT\SYSTEM\0002.
    X320T running Windows 8 Pro x64
    Solved!
    Go to Solution.

    In the time it took me to document this, the error in Device Manager (and consequently in LSC) has gone away:
    MIRACLE CURE! ;-)
    The device "ACPI\DockDevice\_SB.GDCK" no longer appears in Device Manager, only "ACPI\IBM0079\0".
    X320T running Windows 8 Pro x64

  • "Device Cannot Start - Code 10" - Windows Vista Error, w/ 2nd Gen. Nano

    I'm having trouble with my Nano and Windows Vista. The computer is recognizing the iPod just fine and seeing all of my songs, but nothing will play and the diamond bar does not move. I can't hear previews online either.
    Under device manager, a yellow "!" shows up for the iPod, and it says "Device Cannot Start - Code 10" when I check. All of my drivers and updates are current as of today. So is iTunes. Any thoughts?
    It worked before, but now it's not.

    This is a reasonably common error on a PC when there is a problem with either a USB device, your USB cables or hardware, or the system drivers.
    In a case where, as you say, the device works properly with other computers, the problem is more likely to be with the hardware or drivers on the computer you're trying to connect to.
    See this site for some hints:
    http://www.pchell.com/hardware/usbcode10.shtml
    I found it via a web search; I don't have any connection to that site.
    The good news is that your iPhone is probably fine.

  • Audacious, skin problem. Cannot start.

    Hello.
    I just installed Audacious player, but I cannot start it. When I try to run the player, I get the following error message:
    Unable to load skin.
    Check that skin at '(null)' is usable and default scin is properly installed at '/usr/share/audacious/Skins/Default'.
    I have the default skin in /usr/share/audacious/Skins/Default directory. I do not know what the first part of the message means (Check that skin at '(null)' is usable...). Can someone give me a hand.
    I do not know what else information to post. If you need to know anything for my system, I will post the info. I have Arch GNU/Linux Core Dump, kernel: 2.6.24-ARCH. The system is installed as "Basic", I am using fluxbox ... If you need anything else ...
    Regards.

    OT: I'm sorry. I just couldn't help laughing at the subject, which makes perfect sense within the Linux context but which sounds truly bizarre otherwise.

Maybe you are looking for

  • How do I move cc 64 (sustain) data in sync when I move midi notes?

    In the matrix editor, when I 'Select All Following' in order to move everything that follows back a few ticks to get rid of a rythmic hesitation, the sustain pedal data doesn't move with the notes. Obviously, this messes up the piano pedaling. Is the

  • I got a new macbook. How can I transfer my old songs on my iphone onto the new itunes

    I dont want my music deleted but I do want my new songs on my iphone. How can i do that?

  • Problem with JSP taking long time to load.

    Hi, we have three server of oracle apps 10.1.3. only on one server we are getting problem. the problem is some jsp pages are taking long time to load and ssome times they dont evn load completly. half of the page is loaded and dont give any error mes

  • Discoverer In Apps Mode Help

    I am currently working on a project using oracle discoverer and it is being run in "apps mode". This is the first time I have worked practically with discoverer and I am unfamiliar with the standard apps EUL. I understand that the EUL uses a number o

  • Wifi connection requires restart multiple times a day

    6 with 8.2 Every day I must reboot to connect to the Internet with wifi. Depending on use, I might have to reboot 4 or more times. At minimum I do it every morning. I took it to the Apple Store but they suggested replacing the phone. I can't do that.