MSS---Compensation----Review Planning Approval Status Problem

Hi All,
I configured MSS Compensation Review Planning successfully, i was able to see my reporting structre in Review Planning iView properly.
I am having my organizational structure with five level approvals.
Whan i was submitting Compensation plan for my employees as an first level manager it went to higher level for approvals. as an higher level manager i rejected what ever the lower level manager was submitted for approvals. The status "rejection" was updating fine in infotype 0759 without running any reports.
again i submitted for approval as an first level manager to higher level manager for approval, this time i approved as an higher level but the "Approved" status is not updating in infotype 0759.
We are facing this issue with all level managers.
This is the first i am configuring MSS EHP4 Compensation Review Planning.
If any one facing this issue and having solution, please provide the proper solution.
Thanks in Advance.
Regards,
Abhiram.

Can u pls update the solution
Thanks,
Chowdary

Similar Messages

GL Interface (Approval Status ) problem

Hi All,
I have successfully imported Payroll data to GL Journal using GL Import Program (GL Interface) with APPROVAL STATUS = N/A
Now, My requirement is that the APPROVAL STATUS of journal should remains REQUIRED after importing Journal.
Can anyone help/guide me ?
regards
Sanjay

Hi Sanjay,
If i am right, the way you set up the journal approval for a source is by doing the following settings:
1) Enable Journal approval at the SOB level
2) Enable journal approval for the source at the Journal Sources window for the particular source i.e. Payroll
3) Thereafter when you import the journal for the payroll data, using the GL interface the status of the approval flag will be set to required.
Please correct me if i am wrong.
Thanks
Manish Jain.

After approv status inquiry, it should not allow to change anything .

Hi,
As per the client requirement, we have assigned the three level status profile to in inquiry process like Block status, Review and approve status.
Block status-It is initial status. After save the document it will be in block status
Review status u2013It is the 2nd status. After review of authorized person, it will be changed as review status.
Approve status- If everything is correct, then higher authority will give the approval for same and will change the status.
Here client requirement is after approval of same inquiry document, it should not allow to anybody to change anything (quantity, material, any addition) in same document with va02 Tcode. Need your support if anything possibility is there for same requirement.
Thanks
Utpal mishra
Sr.SD Consultant

Already another thread is still open. Please maintain one thread for better monitoring.
Thanks
Regards,
Reazuddin MD

ECM - Review Planning / Planning Overview (Compensation Approval)

Hello Experts,
I am looking for a resolution to a problem I am encountering when using MSS -> Planning -> Review Planning (Compensation Approval) (mss 1.4, ep4).
when launching the review planning webdynpro the following error messages are displayed:
A fatal error has occurred. Please inform your system administrator
No compensation review is assigned to your user
The user is a chief, and is also a higher level chief from the original chief who submitted the planning.
I have experiemented with the spro setting for User Interface Settings -> Define Attributes for Planning Overview
where the all Org. Units have Eligible Employees has been tested with it checked and unchecked.
additionally we ran the report for the respective org units to Prepare Organizational Units for Compensation Planning (RHECM_PREP_ORGUNITS_FOR_PLNG)
Please let me know if you have any ideas?
Best Regards,
Michael

>
Michael L Pappis wrote:
> I am not a 100% sure if the checkmark is Org. Units have Eligible Employees is working the way i thought.
>
> I tested with the checkmark on, and ran the report to prep org units, it gave the me error when launching the approval screen.
>
> i tested with the checkmark off, and ran the report to prep org units, but the parent org unit did not have an elgible employee, so it gave the same error when launching the approval screen.
>
> i moved an elgible employee into the parent org unit, and ran the report again, and than it created the data in T71ADM_PROCESS.
>
> after this final step the webdynpro loaded with no error. i'll have to do some more testing on this.
so figured out the root cause of the problem and why the checkmark "Org units have elgible employees" did not work originally.
when running the report it is trying to find org units based on the compensation review effective dates. In our case we left the end date of the review as blank. this new report does not like blanks based on the way it selects the org unit.
make sure you have an end date for your review in table V_T71ADM08.

Compensation Review Statement and current status of the salary increase of employee

How to check Compensation Review Statement and current status of the salary increase of employee from which table or structure
1 In Planning
2 Submitted
3 Approved
4 Rejected
5 Active

Hi Ross,
Did you find any solution for this requirement? I amtrying to achieve the same.
I tried the option of opening the application in Administrative mode from SE80 but i am not able to view these button in the UI elements there.
Regards,
Umesh Chaudhari

Issue with Planning/ Approval screen in MSS and General Information.

Hello Guru's,
I have 2 req's
1. In General Information of MSS we have Employee Search iView, in the dropdown we have different options like direct reports, employees by org unit, employees by org. tree, now the req. is:
in employees by org. tree we want to have the tree structure collapsed (not expanded).
for ex: root                    instead want to have root
             child1
             child2
I couldn't see any DC for employee search in NWDS. guide me to the proper DC.
2. In Compensation Planning/ Approval screen we have included a new iView and the problem is that on the when employee is selected it is populating the first time and when we select the new employee the iView is not getting refreshed.
for ex.
I selected a employee the first time the iview is getting populated and again from the list when I select a new employee the iview is not populated for the new person selected. our observation the view is not getting refreshed and it is hitting the FM in the backend system when debugging we see the pernr is not getting passed properly.
fyi: there are some of the views which we are not using so in that we created the new view and made it the default view in Window. because of that we haven't created a new DC in MSS.
please help me out in these 2 issues.
points will be awarded for helpful answers.
Thanks in advance for your time.
Regards,
Pramod

My Mistake I need to write the code in WdDoModifyView, instead I worte the whole code in WdDoInit.
for having the tree collapsed:
setNavigationObjectTreeExpandLevel(0);
it will solve the problem.
Kind Regards,
Pramod
Edited by: p409840 on Nov 17, 2008 11:21 AM

MSS-Compensation Planning-Planning Overview Error

Hi All,
When i was trying to executing Planning Overview(Compensation Approval) in MSS i am getting below error which i never seen
A fatal error has occurred. Please inform your system administrator
No compensation review is assigned to your user
We are using BP MSS EHP4.
If any one facing any issues with this application please let me know.
Thanks in Advance.
Thanks and Regards,
Abhi.

Abhi,
Make sure your user ID is linked to employee who is manager of an org unit.
regards
Sridhar

Review Planning "Status" column result text change

Hi SAP HCM experts,
we are on EhP4 , and we have Manager Self Service 1.41 and on compesation side we are using Review planning iView (WDA),in Review Planning iView we have Status column with list of result like "New","Open", "approved" result based on the status, do we have any option to change this text like new,open,approved
I appreciate your help.
Thanks and regards
Vijai

no, do not change these status unless you want to break the application. no flexibility here yet that I am aware of.
entire application / processes is driven off these fixed statuses...

New salary is not updating in MSS Compensation Planning (ECM)

Hi
In MSS Compensation Planning (ECM) iView, when we are applying a percentage increase for a particular employee the new salary column is not updating when we press enter or recalculate. The value is changing intially when we press refresh property for the iView, for the next time the value is not changing even when we press the refresh also.
Regards
Suresh

Hi Suresh,
What is the solution..
because we are also facing a similar issúe ..
our new salary is same as the compensation amount....
but what we are looking for is
new salary = compensation amount +annual base salary
Where do we do this?
tks rgds
g3

How to make "Current Review" available in MSS Compensation backend

Hi
We are implementing the MSS Compensation module.
We are using a custom function module for the employee selection (set up in backend table V_TWPC_NAV). This function is then called from the java side via an RFC call to HRWPC_GET_NAV_OBJECTS which in turn calls our custom function. In our custom function on the backend we need to catch the value the user selected as "Current Review" on the portal screen. Do anyone know how to catch this information? Obviously it is not transferred in any parameter in the RFC function calls.
Best regards
Arne Thage / NNIT / Denmark

Hi Mark,
You can't do it through config. It's a portal development exercise. You will need a portal developer with either WebDynpro or Java knowledge.
Also,
Be wary about putting custom fields on IT0759. When you save entries in the ECM portal it updates IT0759, but before the update it clears out the entire infotype, including anything you have in your custom field. It is best to put that custom field on another infotype.

I need to filter the field Compensation Review :iview Compensation Planning

hello
I need to filter the field Compensation Review (iview Compensation Planning), this value come from table : T71ADM08 Compensation Reviews
i have many values, but i need show a range o one set the of values, any ideas ??
I can show only one filtering parameter from the parameter value of the iView, but it only one value, I need a filter a range
please any ideas, ???

Hello,
having had this very same issue in the past - the option we went with was to enhance the RFC FM that returned the list of the reviews with some removed depending on the employee type.
(I'm assuming that the list of avaliable reviews is dependent on the employee and that's why you want to filter).
Chris

Compensation Planning/Approval

Hi,
We are implementing a Compensation Planning/Approval on ERP 2005. We need to customize the standard functionality as per our requirements. We need to remove some fields from standard view and add custom fields.We have created some custom infotypes and function modules for the same. We have configured columns, column groups, dataviews etc..How do I link custom function module with columns of OADP to fetch data or save data to R/3?
Appreciate your help
Thanks,
Kathy

The OADP simply provides you with views of the org. data based on your config. So I am not sure what you mean by "save data to R/3"....the OADP does not do that. Your possibilities are two-fold...either the data selection side or the data display side.
For data selection....
In configuration for the "Define Rules for Object Selection" , you can configure it to use a function module instead of an evaluation path....per docs:
=======================================================
Function Module for Object Selection
Use
To enable the Object and Data Provider to display an organizational structure view, it must first determine the relevant objects. Therefore, you must define an object selection that is composed of object selection rules or a class for an object search. An object selection rule comprises an evaluation path together with an evaluation depth or a function module for determining objects.
In this field, you store the name of the function module that can be used as opposed to the evaluation path to determine the relevant objects.
=======================================================
If it is not necessarily the data that is pulled but a specific column you want to change to display other data based on your pulled data, you can also use a custom FM at that point as well. In the "Define Columns" configuration, you have the option for :
=======================================================
Define Columns
Use
In this IMG activity, you create columns. In these columns, the user can display additional information about the objects you specified for the defined object selections.
If the column content is to be determined in the backend system, enter a function module that is to get the column content.
To create a function module of your own, use the function module HRWPC_CB_CONTENT in the standard system as a template. You must use this as a template since your function module must have the same interface as the function module in the standard system.
If you want to reuse a function module that you have created for the Column Framework of the Personnel Management component, enter FM from Column Framework in this field.
You can find the relevant function modules in Customizing for Personnel Management under Global Settings in Personnel Management -> Column Framework -> Define Your Own Columns/Change Column Group Text -> Define Your Own Column ->Column Group Definition (view T77COL).
========================================================
Hope this helps!

HR ECM EP4- Infotype 0759 approved status question

Hi HR Experts,
When the planning status of infotype 0759 change from submitted to approved? I have an org unit which is get approved but the infotype 0759 still has planning status submitted. The superior org unit still has open status.
Thanks,
Duy

Hi,
Adding on to Paulu2019s inputs, you must run report u201CDisplay Compensation Planning Progressu201D (RHECM_DISPLAY_PROGRESS). From SAP help:
Upon execution, this report evaluates the contents of the Process History table (T71ADM_PROCESS) for the selected organizational unit(s) during that compensation review, then displays the contents of that table in the report output.
Source: help.sap.com
Hope this helps.
Donnie

MSS - Compensation Profile iViews Error Messages (Parameter CREVI not set)

Hello Folks,
We are currently implementing ECM with MSS and SAP Portal. In the Plan Compensation iView when I click on the Employee Name hyperlink it is launching Employee Compensation Profile page having General Data, Compensation Adjustments, Salary Development, Salary Survey Data, Compensation Guidelines, Compensation Eligibility, LT Incentive iViews.
I am getting below listed messages in these iViews, I am not able to trace where the configuration for these is missing i.e. either in the Resource or Service or in any of the SPRO step. Could you please help me in pointing to the location where I am missing in the config part.
General Data iView - "Internal error; Parameter CREVI is not set, Salary Development: An error occurred while the data was read."
Salary Development, Salary Survey Data, LT Incentive iViews - "No data available"
Compensation Guidelines, Compensation Eligibility iViews - "To display data, first select an employee".
Thanks much for your help!
Thanks,
NVR.

Enter in the iview PCD portal content :
iView Compensation Planning - edit iview - in propertes search for the field Compensation Review (CREV) it's optional and fey from SAP Table T71ADM08
Edited by: Javier Ignacio Serrano Zamorano on May 5, 2010 10:20 PM

Send Approval - Status and Tracking System

Hi..
I want to create planning approval before data save to cube.
I have been setting subplan & planning Sessions like below :
Subplans
1.Select the option Define Subplan and choose Execute.
2.Enter the names of the subplans
Planning Sessions
1. Select the option Define Planning Session and choose Execute.
3. Enter the names of all required planning sessions.
After it had been finished, it didn,t work.
Can you tell me how to fixed the problem, so if I input data planning, it will send email to request approval before save to cube.
Thanks.
Siandari

Hi
Maybe it doesn't work because SAP deliver these services in inactive status.
Try to active them in SICF
Try to check this link for procedure
http://help.sap.com/saphelp_nw2004s/helpdata/en/ff/3deba47cf511d5b3e30050dadfb23f/frameset.htm
Hope it helps
Andrea

MSS---Compensation----Review Planning Approval Status Problem

Similar Messages

Maybe you are looking for