MSS Configuration Documentation needed.

Hello Gurus,
Can somebody please send me the configuration documentation on MSS. We are currently implementing Business package for MSS 60.1 on ECC 5.0.
Thanks a ton,
Sasi.

hi Bharath,
could u plz fwd me the MSS configuration document. thankign you in advance for fwdind. plz fwd it to [email protected]
regards
shiva

Similar Messages

Need documents of Manager-Self-Service (MSS) configuration in R3

Hello Friend's,
I need the configuration of MSS in R3 side which Functional guy will do... I find the document for ESS but i couldn't find for MSS ... so please give me guidance for that asap...
here is the link for ESS configuration in r3 http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAESS/ESSIAC.pdf
Like this pdf file i need for MSS configuration in r3 side...

Thanks Siddharth for your quick reply, but I still have doubts.
According to Note 1588625 - Release information for Manager Self-Services Add-On 1.0, the MSS addon will be release for Portal and NWBC , so if you don´t want to use a porta you can use NWBC but,
How can we call it from a Websphere portal? Is there any integration option using NWBC and Websphere portal?
And in Note 1582553 - Release strategy for the ABAP add-on EA-HR_MSS you can see that now, the availability of EA-HR_MSS is only in controlled availability, and until end of 2011 will not be fully released!!
SAP Release     Add-On Release     Availability
SAP ECC 6.0 EHP5      EA-HR_MSS 1.0     22.06.2011 CA
SAP ECC 6.0 EHP5      EA-HR_MSS 1.0     22.12.2011 GA
GA: general availability
CA: controlled availability
PL: pilot version
So, really you can use MSS integrated in a Websphere portal?
Thanks in advance and best regards.

ESS / MSS configuration guides on ECC6 and EP7

Can any one send the ESS/MSS configuration guide or documentation (Not sap help) for setting up self services applicaiton in ECC6 and EP7 environment.
Thanks and regards
Dhina

these links are helpful to you
For ESS :
http://service.sap.com/ess
/people/siddhartha.jain/blog/2006/04/10/configuring-the-business-package-for-employee-self-service-ess-mysap-erp-2004
/thread/431512 [original link is broken]
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/21eb036a-0a01-0010-25a3-b2224432640a
/people/srinivasarao.gv2/blog/2005/06/11/configuring-ess-in-sap-enterprise-portal-60
/people/siddhartha.jain/blog/2006/04/10/configuring-the-business-package-for-employee-self-service-ess-mysap-erp-2004
/people/sap.user72/blog/2003/08/18/going-live-with-ess
http://help.sap.com/saphelp_nw70/helpdata/en/52/01fc3f17c2c342e10000000a1550b0/frameset.htm
Web Dynpro Java
http://www.latrobe.edu.au/hr/ess/ess-howto.htm
/people/siddhartha.jain/blog/2006/04/10/configuring-the-business-package-for-employee-self-service-ess-mysap-erp-2004
MSS:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/ep/business%2bpackage%2bfor%2bmanager%2bself-services%2b(MSS)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e534c990-0201-0010-a6b3-ce6ad5ce83a0
https://www.sdn.sap.com/irj/sdn/wiki?path=/pages/viewpage.action?pageId=31476
Help needed regarding ESS,MSS
New to Webdynpro/ESS/MSS

Open Item Management and Taxation Configuration Material Needed

For an interview, needed is some help;
- Open Item Management - Definition and how it is managed.
- Taxation Configuration - Configuration Documentation
- FI - HR integration - Documentation.
Any help would be of great help.
Points awardable.

Hi,
When a GL is created it can be a normal GL account or an open item managed GL Account. In case of an open item managed GL Account the debites and credits are knocked off and the net balance in the account indicates the amount amout due or amount receivable etc.
Some of the examples of GL Accounts are GR/IR clearing account, Bank clearing account, accrual accounts, Prepaid AAccounts, Loan account etc.
By default Customer and Vendor Accounts are open item managed accounts.
In SDN you can search for the documentation of Tax configuration. There are several threads on this topic.
Thanks
Murali.

Help required for MSS configurations on Portal

Hi Experts,
Can someone please send me Portal Configuration guide or some kind of document on how to configure MSS --> Overview and Organisation services. Do I need to pass any parameters or any other configurations required?
Please help me.
Earlier responses would be much appreciated.
Thanks
Uday

Hi uday,
Please find the below links
MSS Configuration within SAP Portal: Organization Structure
ESS/MSS configuration in Portal as a part of HCM
http://help.sap.com/erp2005_ehp_04/helpdata/EN/14/1a6493d09849448a0537ee6727e799/frameset.htm
Hope it helps...
Thanks,
Rahul.

Configuration documentation for idoc type PEXR2001 & idoc type FIDCCH01

Is there any documentation for SAP configuration that needs to be done to get an outgoing PEXR2001 Idoc created? This is the payment file Idoc. We are trying to send this IDoc to a 3rd party, and I don't know how to get it created from the payment run.
Also, the FIDCCH01 is an incoming IDoc that would change discount dates and amounts on posted financial documents (vendor invoices). Is there any documentation regarding this IDoc and what incoming RFC is used to actually post the changes?

resolved the problem/question ourselves

Ess mss configuration for time payrol and pa/om

WAT ARE THE IMP t.CODES TO SO ESS and MSS? Can any one guide me how can I chek wether ECC have Portal intagration or not?
Naresh
Forum guidelines not complied - Thread is locked
Edited by: Suresh Datti on Nov 27, 2009 7:10 AM

Hi,
Following are the list of SAP ITs based trasction for ESS MSS
PZ11_PDF - Remuneration Statement.
PPO1
HRUSER    - to find out the user PERNR no.
PTARQ     - Test Environment for Leave Request
SICF      - Maintain Services
SWIA      - Work item As Administrator
SWWL      - Delete work Items
OOSB      - User (Structural Authorization)
Pt63    : Personal Work Schedule
pv8i     : tranning and my booking
PZ11    : to disply salary in back end
for configuration please check following link,
ESS / MSS Configuration (SAP Best Practicesfor SAP HCM V2.600) (N06)
http://help.sap.com/bp_hcmv1600/BBLibrary/Documentation/N06_BB_ConfigGuide_EN_US.doc

CFM configuration documentation

MODERATOR: All points have been UNASSIGNED and the thread LOCKED. Please do not share email addresses or links to SAP copyrighted information on these forums. If you have some information, please consider posting it to the [Wiki|https://wiki.sdn.sap.com/wiki/display/ERPFI/Home] rather than sharing via email. Than you for your assistance.
hi
can any body send me the CFM(Corporate Finance Management) configuration documentation with screenshots.
my personal mail id - [email protected]
duly rewarded.
sri
Edited by: srilatha v on May 23, 2008 9:29 AM

Hi:
For In-House Cash,Refer to
http://help.sap.com/bp_bblibrary/500/BBlibrary_start.htm
W25: FSCM In-House Cash
For Liquidity Planner,Transaction Manager,Portfolio Analyzer,Market Risk Analyzer,Credit Risk Analyzer
Refer to
http://help.sap.com/saphelp_banking463/helpdata/en/08/A9E139709BA63BE10000000A114084/frameset.htm
Please let me know if you need more information.
Assign points if useful.
Regards
Sridhar M

IDOC to File Scenario - Configuration steps need to be done in R3 and XI

Hi Experts,
I am working with IDoc to File scenario. Can someone please explain, what are the steps or configuration things need to be done in R3 and as well as in XI too.
Thanks in advance.
Regards,
Sree

Hi Sree,
I thought i will just share a few basic thoughts that you need to take care while doing an IDOC to File Scenario. Just see if it helps you in anyways.
While doing an IDOC -> XI -> File scenario, The Points to noted are:
1. You dont need a DT, MT or a message interface for the IDOC as it itself acts as the Message Interface.
2. You import the IDOC and use the same in your mapping.
3. In this configuration note that you dont have a sender agreement as you dont have a sender IDOC adapter.
If it is that you wanted to send an IDOC from XI (File to IDOC) , then in this case:
points 1 and 2 will remain, but the 3 will not. You will need a sender agreement for the file and a receiver agreement for the IDOC.
IDOC -> File scenario ref:
<a href="/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters scenario</a>
File -> IDOC ref:
<a href="/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping to IDOC</a>
To be able to trigger your IDOC from the SAP ISU system, you will have to set the partner profile in we20. Select your Business System (mostly under Logical system) and then create Outbound entries for whichever IDOC you want to trigger.
You define your basic type also in your partner profile settings, Please go thru the following links to get a better idea about partner profile:
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b833243d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b7cd343d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/32/692037b1f10709e10000009b38f839/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/5e/b8f8bf356dc84096e4fedc2cd71426/frameset.htm
Also, I would suggest that you go through this blog by michal if any issue arises,
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
Also have a look at these forum threads...
IDOC TO FILE SCENARIO
idoc to file scenario
I hope this answers your query.
Regards,
Abhy Thomas

I manage 60 ipads for a school using Apple Configurator. Need to update to iOS7 and AC1.4.3...Is it best to use Mountain Lion or Mavericks, as I also need to update from Lion 10.7 for the new AC and iOS to work properly.

I manage 60 ipads for a school using Apple Configurator. Need to update my devices to iOS7 and Apple Configurator to 1.4.3...Is it best to use Mountain Lion or Mavericks, as I also need to update from Lion 10.7 for the new Apple Configurator and iOS7 to work properly.

I always run a Time Machine backup before updating anything and recommend you run a backup as well. Paid apps should migrate over without any problem. If you have problems with VPP codes not transfering over properly, you can talk to your Apple SE or contact VPP for Education support and they can help you. While I haven't experienced any problems with updating, its never a guarantee that others will have the same experience.
Good luck!
~Joe

PC went south. Geeks brought it back. PS elements and premier 11 can't start. Error msg sez configuration incorrect needs to be reinstalled. When I load the disk I get a blank screen. Try to uninstall and can't find apps i control panel. How can I get the

PC went south. Geeks brought it back. PS elements and premier 11 can't start. Error msg sez configuration incorrect needs to be reinstalled. When I load the disk I get a blank screen. Try to uninstall and can't find apps i control panel. How can I get the apps back?

adobeamatuer
Thanks for the reply.
Although the security of Windows XP SP3 32 bit is compromised by Microsoft no longer supporting XP, if Windows XP was restored as claimed, you should still be able to install/uninstall Premiere Elements versions of it that you did before the Microsoft support removal.
I think a revisit to the Geeks would be in order. It may be that they could not restore Windows XP because of the Microsoft non support. I would take along the Premiere Elements installation disks so that you do not leave there without actually seeing Premiere Elements (or a non Adobe program) running on your restored Windows XP. What was the other software that you tried to use that did not work?
Please update us on your progress when you get a chance.
Best wishes
Thanks.
ATR
Add On...spelling correct 12 03 2014.

ESS and MSS configuration in sap ECC 6.0

Hello friends,
In our ECC6.0 system we want to configure ESS and MSS... well is this ECC6.0 system have contains this settings in predefine or i have to apply for some patches and addons???? what will be the further steps for basis peoples in this ESS and MSS configuration??? please help me...
Regards
Farkath
Edited by: farkath ulla on Nov 29, 2011 4:34 PM

Hello Farkath,
Please go through the below wiki to get more details of components required in ECC to configure ESS/MSS in portal.
http://wiki.sdn.sap.com/wiki/display/EP/DownloadinganddeployESSand+MSS
Good Luck.
Thanks,
Siva Kumar

1941W configuration help needed

Our Deployment Scenario:-
1941W Gigabit Ethernet 0/0 is connected to the PPOE connection of the ISP.
Gigabit Ethernet 0/1 is connected to the wired LAN
I have created 2 wireless radio Cisco_Kamran_BGN which is operating at 2.4 Ghz Devices and Cisco_Kamran_A which is operating at 5Ghz Devices.
I have created 2 VLans for the Wireless.
Vlan 10 for Cisco_Kamran_A        192.168.10.x
Vlan 11 for Cisco _Kamran_BGN   192.168.11.X
The problem is the Wireless users are not getting the IP address from the respective DHCP server which has been configured on the Router.
Can please any from the community help me and show me where I am missing the configuration.
Please find my router & ap configuration below.
Router Configuration
Router#
sh run
Building configuration...
Current configuration : 3022 bytes
! No configuration change since last restart
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Router
boot-start-marker
boot-end-marker
enable secret 5 $1$TdQt$npYeaf/W0kRElcfMggzJ31
no aaa new-model
service-module wlan-ap 0 bootimage autonomous
no ipv6 cef
ip source-route
ip cef
ip dhcp excluded-address 192.168.1.1 192.168.1.50
ip dhcp excluded-address 192.168.10.1 192.168.10.10
ip dhcp excluded-address 192.168.11.1 192.168.11.10
ip dhcp pool DHCP
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
dns-server 195.229.241.222 213.42.20.20
ip dhcp pool Cisco_Kamran_A
network 192.168.11.0 255.255.255.0
default-router 192.168.11.1
dns-server 195.229.241.222 213.42.20.20
ip dhcp pool Cisco_Kamran_BGN
network 192.168.10.0 255.255.255.0
default-router 192.168.10.1
dns-server 195.225.241.222 213.42.20.20
multilink bundle-name authenticated
crypto pki token default removal timeout 0
license udi pid CISCO1941W-E/K9 sn FCZ1553C1VK
hw-module ism 0
redundancy
bridge irb
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
ip address 192.168.1.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
duplex auto
speed auto
interface wlan-ap0
description Service module interface to manage the embedded AP
ip unnumbered GigabitEthernet0/0
arp timeout 0
no mop enabled
no mop sysid
interface GigabitEthernet0/1
no ip address
duplex auto
speed auto
pppoe enable group global
pppoe-client dial-pool-number 1
interface Wlan-GigabitEthernet0/0
description Internal switch interface connecting to the embedded AP
switchport mode trunk
no ip address
interface Vlan1
no ip address
interface Vlan10
ip address 192.168.10.1 255.255.255.0
ip access-group DSL_ACCESSLIST in
ip nat inside
ip virtual-reassembly in
interface Vlan11
ip address 192.168.11.1 255.255.255.0
ip access-group DSL_ACCESSLIST in
ip nat inside
ip virtual-reassembly in
interface Dialer1
ip address negotiated
ip nat outside
ip virtual-reassembly in
encapsulation ppp
dialer pool 1
ppp authentication pap callin
ppp pap sent-username xxxxxx password 0 xxxxxx
ppp ipcp route default
ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat inside source list DSL_ACCESSLIST interface Dialer1 overload
ip access-list extended DSL_ACCESSLIST
permit ip 192.168.0.0 0.0.255.255 any
control-plane
line con 0
password xxxxxx
login
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line 67
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
line vty 0 4
password xxxxxx
login
transport input all
scheduler allocate 20000 1000
end
Router#
Router#
Router#
Access Point Configuration
ap#
ap#
ap#
sh run
Building configuration...
Current configuration : 2603 bytes
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname ap
enable secret 5 $1$JxdQ$a2/00bWJuhUKP9QLC94YD/
no aaa new-model
dot11 syslog
dot11 ssid Cisco_Kamran_A
   authentication open
   authentication key-management wpa
   guest-mode
   wpa-psk ascii 7 1045081417161C5A555C7A7B
dot11 ssid Cisco_Kamran_BGN
   authentication open
   authentication key-management wpa
   guest-mode
   wpa-psk ascii 7 020D05561907017015165949
username Cisco password 7 14341B180F0B
bridge irb
interface Dot11Radio0
description 802.11bgn radio
no ip address
no ip route-cache
encryption mode ciphers aes-ccm
broadcast-key change 3600
ssid Cisco_Kamran_BGN
antenna gain 0
station-role root
bridge-group 11
bridge-group 11 subscriber-loop-control
bridge-group 11 block-unknown-source
no bridge-group 11 source-learning
no bridge-group 11 unicast-flooding
bridge-group 11 spanning-disabled
interface Dot11Radio1
description 802.11a radio
no ip address
no ip route-cache
encryption mode ciphers aes-ccm
ssid Cisco_Kamran_A
antenna gain 0
no dfs band block
channel dfs
station-role root
bridge-group 10
bridge-group 10 subscriber-loop-control
bridge-group 10 block-unknown-source
no bridge-group 10 source-learning
no bridge-group 10 unicast-flooding
bridge-group 10 spanning-disabled
interface GigabitEthernet0
description the embedded AP GigabitEthernet 0 is an internal interface connecting AP with the host router
no ip address
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface GigabitEthernet0.10
description 802.11a bridge
encapsulation dot1Q 10
no ip route-cache
bridge-group 10
bridge-group 10 subscriber-loop-control
bridge-group 10 block-unknown-source
no bridge-group 10 source-learning
no bridge-group 10 unicast-flooding
bridge-group 10 spanning-disabled
interface GigabitEthernet0.11
description 802.11bgn bridge
encapsulation dot1Q 11
no ip route-cache
bridge-group 11
bridge-group 11 subscriber-loop-control
bridge-group 11 block-unknown-source
no bridge-group 11 source-learning
no bridge-group 11 unicast-flooding
bridge-group 11 spanning-disabled
interface BVI1
ip address dhcp client-id GigabitEthernet0
no ip route-cache
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
bridge 1 route ip
line con 0
no activation-character
line vty 0 4
login local
end
ap#
ap#
ap#

Hi Stepehen,
Did the configuration as per your advice but i am getting the below mentioned error which i have highlighted it in red. Please advice what needs to be done.
Home
Re: 1941W configuration help needed
created by Stephen Rodriguez in Getting     Started with Wireless - View the full discussion
conf t
interface     Dot11Radio0
no ssid     Cisco_Kamran_BGN
no encryption mode     ciphers aes-ccm
exit
interface     Dot11Radio1
no encryption mode     ciphers aes-ccm
no ssid     Cisco_Kamran_A
exit
dot11 ssid     Cisco_Kamran_A
vlan 10
dot11 ssid     Cisco_Kamran_BGN
vlan 11
exit
interface     Dot11Radio0
encryption vlan 11     mode ciphers aes
ssid     Cisco_Kamran_BGN
exit
interface     dot11radio0.1
encapsulation     dot1q 1 native
bridge-group 1
interface     dot11radio 0.11
encapsulation     dot1q 11
bridge-group 11
Configuration of     subinterfaces and main interface
within the same bridge     group is not permitted
exit
interface     Dot11Radio1
encryption vlan 10     mode ciphers aes-ccm
ssid     Cisco_Kamran_A
interface     dot11radio1.1
encapsulation     dot1q 1 native
bridge-group 1
interface     dot11radio1.10
encapuslation     dot1q 10
bridge-group 10
Configuration of subinterfaces and main     interface
within the same bridge     group is not permitted
end
wr
Reply to this message by going to Home
Start a new discussion in Getting Started with Wireless at Home

Which all configurations you need to do in R/3 for an Idoc to file scenario

which all configurations you need to do in R/3 for an Idoc to file scenario?
Rgds
Ruchitha

Hi ruchitha thakur ,
A Summary of the Steps to be carried out to enable a SAP R/3 System send Idocs to SAP Exchange Infrastructure.
First - Maintain the Sender R/3 System:
SM59 : Create a RFC destination to XI
WE21 : Create a TRFC Port ->Specify the RFC Destination Created
BD54 : Create a Logical System for the Idoc Receiver
WE20 : Create Partner Profile ->Maintain Outbound and the Inbound Parameters
Second - Log on to XI System:
SM59 : RFC Destination for Sender System
IDX1 : Create the port to get Idoc Metadata from Sender System ( The Port Name must match the port name in the idoc header - Usually in format SAP<System ID>. eg. SAPID1 [Optional Step. Not mandatory]
IDX2 : Maintain the Idoc Metadata. This is needed only by XI, and not by other SAP systems. IDX2 is needed because XI needs to construct IDoc-XML from the IDoc. No other SAP system needs to do that.
To Enable Acknowledgement:
SXMB_ADM ->Integration Engine Configuration ->Specific Configuration ->Add New entry -> Select parameters as:
Category: RUNTIME
Parameters: ACK_SYSTEM_FAILURE
Current Value: 1
GO TO SLD:
Create Technical System: Choose WEB AS ABAP if the system is R/3 -> Define SAP SID, Installation Number and Database Host Name a Maintain message Server Details according to Sender System -> Maintain Client Details of Sender System ->Select a Installed Product for Sender System
Create Business System: Choose WEB AS ABAP if the system is R/3 -> Choose the Technical System and the client Created Before -> Choose the Installed Product -> Set:
Business System Role: Application System
Related Integration Server: Integration Server
Integration Builder
Integration Directory:
Add Business System: Adapter Specific Identifiers -> 'Logical System' identical to the 'Logical System Name' in the SLD Business System
IDoc Receiver Communication Channel: port the same as XI System IDX1
The following web-sites give u step-by-step solution to configure R/3 :
ALE configuration for pushing idocs from SAP to XI
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
How to convert an IDoc-XML structure to a flat file and vice-versa in XI 3.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/46759682-0401-0010-1791-bd1972bc0b8a
Introduction to IDoc-XI-File scenario and complete walk through for starters.
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
IDOCs (Multiple Types) Collection in BPM
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
Step by Step Procedure of IDOC to File Scenario using BPM
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/main&
cheers!
gyanaraj
****Pls reward points if u find this useful

DMS Configuration Documentation

Hi,
Can anyone pls send me the DMS configuration documentation ?
If I want to use Fileserver ( external data server but not SAP content server) for storage of documents then how do I configure this ?
Do anyone have any idea ?
One more question: While assigning original files to the documents we have to assign Document storage area. How and where this is configured ?
thanks and warm regards
Purnendu

Hi Maiti,
Did you get any idea?
I have not worked on the your scenaio, but trying to find the solution.
You define settings for the <b>Internet Application Component</b> Document
Search on the Web here.
For more information, see the following documents:
o   Document Management: Document Search in the World Wide Web
    For information about the features of the document search.
o   SAP Library
    For information about the installation of components of SAP
    Knowledge Provider:
    -   SAP Content Server
    -   Index Management Service
    -   SAP Gateway
    In the SAP Library, choose:
    Cross-Application Components -> Document Management -> Original
    Application File of a Document Info Record -> Storing Original
    Application Files -> Storage of Data in Storage Systems Using the
    Knowledge Provider and Installation Notes
Internet Transaction Server / SAP@Web Studio (BC-FES-ITS)
Complete business solution for linking mySAP.com components to the
Internet.
Regards
Rehman
Internet Application Components (IACs) enable users to access business
information in mySAP.com components by starting SAP transactions,
function modules, or reports from a Web browser.
You can make IACs available to users outside your company using the
Internet or users within your company through the intranet.
You can modify and use the IACs supplied by SAP or use them as templates
for developing your own.

MSS Configuration Documentation needed.

Similar Messages

Maybe you are looking for