MSS Iview Problem -Any Experts help please
I've configured ESS BP in my Portal successfully and it's running perfectly fine. Now i've imported MSS also without any problems. Now the issue is when i'm launching the My Staff iViews it gives me a message "Could not connect to the R/3 System" . These iViews using the system object "SAP_R3_HumanResources" which has been used by the ESS iViews also. Now ESS iViews are working fine with the same system object but MSS iviews are giving me the error message.
My System landscape :
MSS BP Installed: BPMSS601_19-20001489
R3- 4.6C
Portal : EP6 Sp11
WAS: 6.40
ITS - Standalone ( Not integrated)
when i test my System object for ITS ,it is working fine , but it is failed for WAS Connection and Connector test
Any help will be highly appreciated.
Hi Umair,
Thanks for your response, i am getting same error for all iviews.I pointed that there is some problem with my System object, i tried to test connection for the "Connection Test for Connectors" i am getting following error.But Connection test is success for the "ITS Connection"
com.sap.mw.jco.JCO$Exceptionoccured->Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=XXXX SYSNR=00 GWHOST=XXXX GWSERV=sapgw00 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR service '?' unknown TIME Wed Aug 30 16:42:35 2006 RELEASE 640 COMPONENT NI (network interface) VERSION 37 RC -3 COUNTER 11
my understand is , ESS is working fine for me because ,ESS iviews are IAC's based iviews which are running on ITS(ITS connection is working fine for me),
i think some problem with connectors(jco).....could you please suggest me.
Thanks
Aravinda
Similar Messages
-
MSS Iview error - Any body help me - Very urgent
Hello All,
I've configured ESS BP in my Portal successfully and it's running perfectly fine. Now i've imported MSS also without any problems. Now the issue is when i'm launching the My Staff iViews it gives me a message "Could not connect to the R/3 System" . These iViews using the system object "SAP_R3_HumanResources" which has been used by the ESS iViews also. Now ESS iViews are working fine with the same system object but MSS iviews are giving me the error message.
My System landscape :
MSS BP Installed: BPMSS601_19-20001489
R3- 4.6C
Portal : EP6 Sp11
WAS: 6.40
Any help will be highly appreciated.Hello All,
I've configured ESS BP in my Portal successfully and it's running perfectly fine. Now i've imported MSS also without any problems. Now the issue is when i'm launching the My Staff iViews it gives me a message "Could not connect to the R/3 System" . These iViews using the system object "SAP_R3_HumanResources" which has been used by the ESS iViews also. Now ESS iViews are working fine with the same system object but MSS iviews are giving me the error message.
My System landscape :
MSS BP Installed: BPMSS601_19-20001489
R3- 4.6C
Portal : EP6 Sp11
WAS: 6.40
Any help will be highly appreciated. -
my iPhone 4 appears with no service every day, i have to make restart and a few hours later again the same problem, Any other solution please???
This is almost always a symptom of a phone that was jailbroken or hacked to unlock it.
Where did you get the phone? -
please help i started my project with video format 720HD, resolution 12x720, rate 25p. at last when i finish and burn to dvd the edges are cut off and my logo cut off the screeen aswell any one help please i am really in trouble. thanks
Sorry, but I don't know anything about that app.
I did go to their Web site and I see they have a support link. Perhaps you can get help there or in their forum.
If you are OK with a DVD with a basic menu, you could try the Share>DVD option in FCP.
Good luck.
Russ -
i forgot the password of my iphone 3g and when i try to restore it it shows the message"my iphone 3g could not be restored an unknown error occurred(1015)" can any body help please..
This error normally appears if you attempted to downgrade or modify your iOS. See here http://support.apple.com/kb/TS3694#error1015
-
How do I change DNS to Business Catalyst servers. I am having problems can anyone help please?
What problem are you having?
Have you read this KB? - Domain name and DNS: Quick reference -
I have a brand new i phone 4s and i have updated the soft ware to the 5.1 and tried to restore it to download my old contacts and apps etc. and my computer now wont recognise my phone and itunes will not do anything can any body help please???? i need this sorting asap xxxxxxx
see if this link helps http://support.apple.com/kb/TS1538
-
I am trying to find a driver to syn mini mac to Lexmark x9350. Can any body help please?
Humm... the only Lexmark X9300 download that I see is for SL 10.6...?
Lexmark United States Support & Downloads for Lexmark X9350
I'm not sure exactly what "component missing" means, but it sounds more like a missing driver than a missing printer part?
To be honest, I think your going to have to remove all previous Lexmark drivers and software from your system, temporarily connect the printer up USB and use the system updater as per the link that I posted in my first reply.
Lexmark United States
You might also check to see if you have a failed print job..?
Open the Print & Fax Preferences and select Open Print Queue...
Pause the Printer using the green button.
Select (highlight) each of the jobs in Status and Delete them all.
Resume Printer using the green button and send it a new job. -
i changed my email for my apple account online and now i can't log into itunes on my iphone 5 can any one help please?
Sign out of your Apple ID on the device and sign in with the new credentials.
-
HP Pavillion HPE H8-1270 - Blue Screen on Start Up Problem.. Help Please!
I don't often turn my pc off, as I know they don't like it BUT today I did & to my horror, when I turned back on I got the dreaded Blue Screen! Driver light is non responsive, won't read a disc, can't F11 to Safe Mode.. NIGHTMARE! I use Acronis as a Back Up (as well as external drive) but can't even get to that! Had no previous warning that there were any errors etc so really don't know what has happened or what the problem could be. Maybe Hard Drive failure? Even if the **bleep** thing decides to come on, I will be worried that this will happen again! Any suggestions? Thanks in advance...
Hi Debs_x, Sorry to hear that you are getting a blue screen on your computer. Here is a link that I think may help you with this issue. http://www.youtube.com/watch?v=LuuntMjebwU
If you have any other questions, please feel free to respond.
Thank you
Waterboy71
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP -
i recently got an ipod touch 3rd generation, i cannot seem to get it connected to the internet... it connects to the router but cannot seem to get connected to the internet, it seems to connect to the router for a very short while and then suddenly disconnect again, i have tried various solutions but cant seem to solve it, this seems to be a common problem as i have seen many complaints on other forums, many say it may be the dns server . please can any one help?
Tap Settings / General / Reset / Reset Network Settings.
See if that helps.
If not try the iPod touch - Wi-Fi Troubleshooting Assistant. -
Quick time 7.1.3 problem...help please...
I recently installed Quick time version 7.1.3...and iTunes 7 onto my computer. I have since tried to load a game that I recently purchased for my child (DK's Milo and the Magical Stones). It does not work. (The message that I get says "Director Player Error. Property not found. # duration") I e-mailed the manufacturer and they stated that I need to use the version of Quick time that is on the game disk (not quite sure which version it is since it will not allow me to load it). The old version will not load because it recognizes that I have a newer version of it on my computer. And if I could accomplish this...iTunes will work now without Quick time 7 now...so it is pointless. Help please! This must be happening to a lot of people I imagine...
A extremely kind and thoughtful individual gave me these instructions.
Okay, let's try getting a crash log for itunes and sending it to the Apple Engineers.
Typically, you'll need to configure Dr. Watson on your PC in order to generate crash logs. Windows start menu -> Run. Type in "cmd". Hit return. At the prompt in the command line window that comes up, type in
drwtsn32 -i
And hit return.
This will create crash logs in Documents And Settings\All Users\Application Data\Microsoft\Dr Watson\. There'll usually be a file in here called "drwtsn32.log"prior to collecting the itunes crash log, delete any existing crash logs in there. (we want to make sure we send the correct crash log.)
Launch itunes, collect the crash log, and send it to [email protected]
In the email:
(1) state the precise version number of itunes that you're using.
(2) include the URL to this thread so that the person who gets the email has some context, but also give as much information about the context of the crashing as you can.
I sent off this morning and am awaiting a reply. As soon as I hear back I will update this posting. -
2.2.1 problems - can anyone help please?
I downloaded this new update last night and now I cannot sync music with my 2ng gen ipod touch. If I download a game from IT store I can sync this but it does not recognise any changes to my music folders etc. I have tried restoring ipod touch to factory setting (as suggested in previous topics) but when I sync it it is only recognising games and photos - I now have no music on ipod!! Can anyone help please!!??
Have tried:
1. iTunes restore repeatedly - it never finishes and I get error 1604
2. Tried alternative usb ports
3. Tried alternative pcs - both xp and vista
4. Uninstalled itunes, cleared registry, rebooted and reinstalled itunes
Still no change. If I went into Apple and booked a Genius appointment could I pay £140 for a new phone? -
I can't delete my bt emails or move them to folders, other emails from tiscali no problem with, anyone help please
I did that and it is currently whirring away, had over 16000 emails as everything got imported when I set emails up (only had this computer 5 days). So will see what happens when it stops doing whatever it is doing. Sorry if I appear stupid but first Mac I have owned so everything a bit new. Have managed to get most things working correctly just can't sort this BT email problem out. Will report back later!
-
I am trying to save Files to favourites but can not see any place on firefox where I can do this, yes there is a favourites folder there that migrated with me to firebox, but I can not add to it, can any one help please
In Firefox favourites are called bookmarks. For details on using them see the [[bookmarks]] article.
Maybe you are looking for
-
Opening Photoshop CS3 psd files in Photoshop CS2 (Mac Tiger 10.411)
Is it possible to open Photoshop CS3 psd files in Photoshop CS2? After I created them in Photoshop CS3 I reset the preferences to maximize compatibility "always", then I resaved all the psd files. Do you think this will work? I have to open them in C
-
FIXED: VLC 1.1 doesn't play .webm while totem and mplayer do
Looks like VLC isn't built with libvpx support even though that lib is in Arch's repo already and according to the VLC website VLC 1.1 should support .webm. The error message VLC gives is, No suitable decoder module: VLC does not support the audio or
-
OBIEE Production Environment - Should it be made Private or Public?
I am interested to know whats the best practice for OBIEE Production environment's firewall setup? I feel it should be behind the firewall on private space, but i am having to convince my networking folks to make it private instead of public? But i d
-
My iphone 4 is synced to my parents computer, can I change this to sync my iphone with my laptop?If so, how?
-
Limiting the Auto Query or turning feature this Off
Post Author: jhartney CA Forum: Data Connectivity and SQL Is there a way to stop or limit the automatic database querying? Such as when creating a new select criteria using the "Select Expert" and clicking on the dropdown of available values that ar