MSS iView Salary Data Not Correct

Hi all,
In the MSS salary data iView, it's showing the salary which is reading from infotype 8. But for some countries, for example Taiwan and Japan, since the salary number is chopped off with the last two digits. For example, the number in infotype 8 is 1234, it will show up as 12 (rounded from 12.34). Does anyone have a idea why this is happening? did we miss any configuration?

Hi Bala,
Thanks for your quick help. Yes, we do realize that it's not portal issue. And we know as a fact that the decimal places defined for Taiwan and Japan are always as "0" in TCURX. But we could not change it here because it will affect all program running based on this table. We do believe that anywhere else in ECC, based on the decimal for each country, the program will handle the conversion seperataly, so it will show the correct data on the UI. But looks like either we are missing configuration in MSS side or this is a bug from SAP. If it's a bug, I was hoping there's a note to fix it and someone here has experienced the same problem and knew the note.

Similar Messages

MSS iView - General Data

Hi All,
I copied the "General Data" iview from MSS biusiness package. I am on EP7.
When i view this page, i see "Contract Data", "Communications Data", "Organisational Assignment" and "Personnel Structure".
I want to remove "Communications Data" from the above iview.
How to achieve this ?
Your help is much appreciated as we are in a critical phase.
Thanks,
Sathya

Hi,
Can you help me regarding MSS iview customization (based on par and not webDynpro).There is one iview General data in which we have to add one new field.For that a new function Module is created in the Backend R/3 by ABAP persons.The New Function module wraps the old function Module + the new Field.Do you know How this filed can be shown in our iview.
Regards
Imran

Time and Date not correct

Hi to all.
Does anybody know how to save your cmos settings to a floppy or CD?
Is there a program that can assist with saving the cmos settings to floppy or CD?
Is there anyway to perform saving the cmos settings within the BIOS to floppy or CD?
I really don't want to go into the BIOS and write down all that info.
I have an HP Pavilion 553w that is 7 1/2 years old, running windows xp home edition version 2002 sp3, 2 gbs of ram, AMD athlon(tm)XP 2100+ 1.73 GHZ, bios version/date Phoenix Techologies, LTD AM35308, 10/07/2002 (Phoenix-AwardBIOS CMOS Setup Utility) SMBIOS 2.3, BIOS Core Version V6.0, BIOS Revision 3.08 10/7/2002.
I know my computer is ancient and I probably should have updated my BIOS, as it is out of date.
Also, after starting up my computer I noticed my time and date is not correct and as of lately have to adjust the time and date to the correct time and date.
I did some research and came across some possible reasons:
1. RTC battery (CMOS battery) may need reseating on motherboard.
2. The battery has become corrupt.
3. BIOS version may be out of date.
My computer is really taking longer than usual to startup and images of icons take longer to display, which may be a sign of the symptoms I listed above.
My computer doesn't have any malware whatsoever, clean as can be.
Any help or advise will be truly appreciated.
Jboman
This question was solved.
View Solution.

Jboman,
There is not need to save CMOS settings unless you changed the default BIOS settings. A bad CMOS battery will not preserve the settings.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

MSS Iview error -Could not connect to the R/3 System

Hello All,
I've configured ESS BP in my Portal successfully and it's running perfectly fine. Now i've imported MSS also without any problems. Now the issue is when i'm launching the My Staff iViews it gives me a message "Could not connect to the R/3 System" . These iViews using the system object "SAP_R3_HumanResources" which has been used by the ESS iViews also. Now ESS iViews are working fine with the same system object but MSS iviews are giving me the error message.
My System landscape :
MSS BP Installed: BPMSS601_19-20001489
R3- 4.6C
Portal : EP6 Sp11
WAS: 6.40
Any help will be highly appreciated.

Hi Mahesh,
Thanks for your repley, I am using the "SAP_R3_HumanResources" as a default alias, The same alias is working fine for my ESS Configuration.
I tried to test connection for the "Connection Test for Connectors" i am getting following error.But Connection test is success for the "ITS Connection"
com.sap.mw.jco.JCO$Exceptionoccured->Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=XXXX SYSNR=00 GWHOST=XXXX GWSERV=sapgw00 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR service '?' unknown TIME Wed Aug 30 16:42:35 2006 RELEASE 640 COMPONENT NI (network interface) VERSION 37 RC -3 COUNTER 11
my understand is , ESS is working fine for me because ,ESS iviews are IAC's based iviews which are running on ITS(ITS connection is working fine for me),
i think some problem with connectors(jco).....could you please suggest me.
Thanks
Aravinda

Photo dates not correct in iOS 7, how to correct this?

Working with iOS 7.0.2 on iPhone 5s. The new screens for showing foto's is nice and handy, but....a lot of pictures are now presented in the wrong year, how can I correct this per picture? With the former iOS version, this became not visable, as there were no years, dates etc. showed.
Maybe it's simple to correct....but I didn't find out yet....

Any way to resolve this?

Sampled Data not correct

I developed a VI to sample three different chanels from my DAQ board. I set up the channels in MAX and they read correctly there, but when I am aquireing data in Labview I get a small voltage value from one of my transducers when it should be almost zero. The othe transducer which is about the same reads correctly. Atached is the basic acquisition set up in Labview 6.1.
Do I need to change my settings in Max?
The transducers are basic pressure sensors with a digital display. The output 0 to 5 volts DC.
Attachments:
Datain.vi ‏48 KB

My last DAQ channel is still incorrect. I changed my order of daq channels going into the array and the last channel is incorrect. Why does the last channel start out reading the correct value and then become incorrect when the voltage is decreased to a low value? I am wondering if it is a timing issue? I created a simple vi (picture attached) to verify that the last daq channel becomes incorrect when going from higher voltage to very low voltage.
The quick and dirty fix would be to sample an additional channel that is not needed and make it the last input since the last input is the only one that reads incorrect.
I tried increasing the acquisition rate and this did not help either.
I have a DAQCard-6024E with a SCB terminal block running Labview 6.1. Any help would be appreciated. The first DAQ traditional MAX channel is a thermocouple the second two are 0 - 5 volt DC Referenced single ended inputs.
Attachments:
DaqTest.jpg ‏59 KB

Video creation date not correctly read?

This might be a bug--it appears to me that Bridge is not reading the EXIF "date/time original" field for avi files--instead it is reading the MS windows dates which is a bad thing because any time you copy a file, these dates get changed. Even just moving a video file to another hard disk will destroy the MS windows "creation date". However the EXIF dates are untouched.
I'm using exiftool to read the metadata.
Bart

iPhoto uses EXIF metadata for it's creation date and videos do not have that metadata. You can use the Photos ➙ Adjust Date and Time.... menu option to change the date to whatever you need to get it to sort in the right order when sorted by Date.
OT

Waranty start date not correct

I bought a Pavillion P6-2330 "off the shelf" from the HP online store in early February, 2013. A few days after setting it up, a pop-up appeared offering to sell me an extension to my warranty. The start date shown in the pop-up for my warranty was November 7, 2012 - over three months before I received my computer. I called HP, and found out that my computer was MANUFACTURED on November 7, 2012. My warranty SHOULD HAVE started on the day in February when I recieved it. After I faxed my receipt to HP, they adjusted my warranty to the correct date in February of 2013. How many out there don't know about this, and have shortened warranties?
You can check your warranty start and end dates in the HP Support Assistant, under the Warranty tab.

Hi,
Usually warranties start at the time of purchase. I wonder if someone else had previously purchased the PC and then had returned it for some reason.
Years back, I ran into warranty issues when the manufacturer had started that warranty on the ship date. I finally got the manufacturer to change that to date received (delivered). The cost of a warranty day on very expensive equipment does add up. Additionally, the time to return the device for a refund is also shorten if the ship date is used.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Regarding Salary Data

Hi,
Under MSS->Employee Info->Compensation Information->Salary Data Iview
Salary Data is not getting displayed though it is there in the backend. Please advise.
Gaurav

Hi Gaurav,
Even if the data is exisiting there in the backend, if it is not visible in the portal.
1. Check if the personal number in ECC has been assigned to the user in the portal.
2. Check if the payroll has been run(till the date) when you want to view the salary slip.
Hope this helps.
Cheers,
Sandeep Tudumu

MSS iView Errors

Hi all. We're getting a Portal Runtime error in our production environment when trying to view certain MSS iviews, such as Absence Days, Personal Data, Detail View Attendances, Company Properties, Emergency Contact, etc.
The error looks something like,
Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 09:28_02/04/09_0155_2490650
Refer to the log file for details about this exception.
The error log gives such clues as:
EXCEPTION
#1#com.sapportals.portal.pcd.gl.PermissionControlException: Access denied (Object(s): com.sap.portal.system/security/com.sap.portal.ep50/ep50_safety)
ErrorPage: com.sapportals.portal.prt.runtime.PortalRuntimeException: Access is denied: com.sap.pct.hcm.orgmanagementeventing.redirect
EXCEPTION
#1#com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component
Component : pcd:portal_content/state.la.portal.folder.global.State/state.la.portal.folder.EP5Development/state.la.portal.folder.roles/Z_PORTAL_LEOMSS/LEO_MSS/nf/state.la.portal.
workset.attendance/state.la.portal.page.mss.absenseDetail/com.sap.pct.hcm.eeprofileabsencedays_0
Component class : com.sap.pct.hcm.employeeprofile.absencedays.AbsenceDaysComponent
Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: Access is denied: com.sap.pct.hcm.hcm_util.error_page
Caused by: com.sapportals.portal.pcd.gl.PermissionControlException: Access denied (Object(s): com.sap.portal.system/security/com.sap.portal.ep50/ep50_safety
All MSS iViews, working and not working, are inheriting from the same top level folder. In their permissions is the Everyone group (Administrator=none, End User=checked) and the super_adminstrator_role (Administrator=owner, End User=checked).
Any ideas on what our problem is?
Edited by: Adam Tidwell on Apr 2, 2009 4:38 PM
Edited by: Adam Tidwell on Apr 2, 2009 4:39 PM
Edited by: Adam Tidwell on Apr 2, 2009 4:43 PM
Edited by: Adam Tidwell on Apr 2, 2009 4:44 PM
Edited by: Adam Tidwell on Apr 2, 2009 4:45 PM

You need to check the permissions of that MSS Iview
Go to the path System Administration>Permisssions,
Go to "pcd:portal_content/com.sap.pct/srvconfig"
Check whether you have valid permission or not.
Also check the below thread that will help you.
Re: Portal Runtime error
PermissionControlException: Access denied
Raghu
Edited by: Raghavendranath Garlapati on Apr 2, 2009 4:52 PM

Salary Data iview inside General Information

Hello Colleagues,
In MSS, we added the "Salary Data" iview to the "General Information" section/workset. However, when we select an employee in the "Search" area, no data is displayed in the "Salary Data".
However, the "Salary Data" works when used inside the "Compensation Information" section/workset.
The Search iview for General Information is com.sap.pct.erp.mss.generalinfo_employeesearch
The Search iview for Compensation Information is com.sap.pct.erp.mss.compensationinfo_employeesearch
My question is: Is there any way of having the "Salary Data" iview working under the "General Information" section (with General Information Search..)?
Thanks in advance,
Marco

Hello Marco,
The iView will not event on selection by just adding the standard delivered view to the General Information Page. You'll probably have to do the following steps first:-
1) Add the Salary Data FPM view to the General Information FPM application perspective using Self-Service Administrator
2) Create a new Salary Data iView by selecting Webdynpro Java Application ->MSS Empl Profile application --> General Information --> Salary data. Add this new iView to your General Information Page
Hope this helps.
Pooja

Date Format in MSS iviews

Hi,
We have EP6 SP11 with the Manager Self Service Business Package. The dates on our MSS iviews are currently showing as MM/DD/YYYY. I have set the default country of the portal to GB but the language setting in the user profile is overriding this. If I set the language to "English (United Kingdom)" the date shows correctly as DD/MM/YYYY. But if I just set it to "English", the dates show as MM/DD/YYYY.
However, we are using an R/3 system as our user store, so the language setting is coming from there (SU01 > Communication section) and there is no option for "English (United Kingdom)", only "English". How can I change the "English" option to default to en_gb rather than en_us? Or can I map the English setting in R/3 to English (United Kingdom) setting in the portal? Or is there something else I can do?
Any help greatly appreciated!
Thanks in advance,
Jane

Hi Jane,
Try to change the language settings of the Internet Explorer and see if it is not being over-ridden from the user profile.
Regards,
Mohan

MSS Absence Report PT64 not working via IAC iView

We have a problem with MSS regarding the PT64 Absence Report. If we invoke the report via SAP GUI it produces a report using the correct date criteria specified.
If we invoke the same report through MSS business package v 60.1.4 on EP6 SP2, the Selection Criteria iView delivered in the business package launches a new window to display the report using an AppIntegrator IAC iView and generates a URL as follows:
http://server/irj/servlet/prt/portal/prtroot/pcd!3a!2f!2fportal_content!2fcom.sap.portal.migrated!2fep_5.0!2ftemplates!2fcom.sap.portal.appintegrator.sap.bwc.IAC?System=SAP_R3_HumanResources&SAP_IAC=hrwpc_fc_exec&SAP_QueryString=S%3DZMSS%26F%3D*HISRETABS+5%26B%3D18000101%26E%3D20050901%26V%5B1%5D%3DZRPT_D1%26O%5B1%5D%3DP00003582
The report ignores the date criteria passed from the MSS iView. I can see in the URL above that the URL contains the dates I specified in MSS (start date=18000101 and end date=20050901).
So I assume that either the URL is wrong or that PT64 or ITS is incorrectly interpreting the URL?
Problem is, how do I know what the URL is supposed to look like?
And if ITS or PT64 is incorrectly interpreting the URL query data, how on earth do I investigate or debug this.
Cheers,
Steve

Hi all,
I am having the same problem, only I am not able to see any reports, the link appears ok but the screen opens up empty.... Any ideas ??
Regards,
Paulo Poinha

MSS iView Error To display data, first select an employee

I have configured a MSS portal role with an employee page. The employee search (team viewer) iView is on the page with general data, salary data, and salary development. For some reason, the salary data iView gives the message "To display data, first select an employee". The other iViews on the page work ok. Any idea what's causing that?

Hello,
The reason why the table is not being displayed is because of the currency you're using. The currency which
you might be populated from the backend is 2 character. I'm not sure if there is any currency code with two characters in the backend System. The standard should be having 3 character.
Best Regards,
Deepak

Date seperator in MSS iViews

hi all
We have a requirement to change the format of date in MSS iViews from mm/dd/yyyy to mm.dd.yyyy. How can we achieve this in portal? Kindly advise.
with thanks
amit

hi paul
thanks a lot for the response...the note u have provided talks about changes specific toa country, but in my case the requirement is a bit more specific. we need to change the format to strictly dd.mm.yyyy
i did not get from the note how do we achieve it. can u please elaborate on it???
amit

MSS iView Salary Data Not Correct

Similar Messages

Maybe you are looking for