MSS : iview with blank screen

Hi all,
when call the Attendance Overview iView (MSS) is displayed the message :
javax.naming.NamingException: Failed in WD JNDI lookup. javax.naming.NameNotFoundException: No child found in WebDynproContext with name mss~ato with 500 Internal service error.
Best regards.
Miki

Hello Miki
Check the Wheter WD component : mss~ato is deployed or Not all instances of your server. Try to run the application from below path.
using Content Administration -> Webdynpro
Some times if above component not deploys in any one instance there is chance to get JNDI exception.
BR
SS

Similar Messages

Issue with blank screen HP G60-447CL Notebook PC

Issue with blank screen HP G60-447CL Notebook PC, I purchased warranty and have had the laptop serviced before for the same exact issue. Same problem has come up again blank screen it has been less than five months this problem was fixed and it has started again: blank screen white, laptop is powered on nothing else happens. Now I cannot reach anyone.

You're very welcome.
I have tried many times to help folks with different drivers and nothing has worked.
I'd say at least a dozen people have posted about this issue, and no one can fix it.
I don't understand it either.

I have a problem with my mac, lit with blank screen loading bar and then goes out, I need assistencia on line or contact the Technical Support Service in Argentina

I have a problem with my mac, lit with blank screen loading bar and then goes out, I need assistencia on line or contact the Technical Support Service in Argentina

Priscilla,
if your Mac is still in warranty, then you should contact the Argentinian technical support service. If it is out of warranty, then we can try to lend a hand. (We’re just fellow Apple product users here.)

T43 – Model 1871-FU1: Will not boot with blank screen. Only Fan is running. Any ideas?

T43 – Model 1871-FU1: Will not boot with blank screen. Only Fan is running. Any ideas?
Solved!
Go to Solution.

What lead_org is referring to is commonly known as "re-balling" which involves unsoldering the Southbridge chip from the planar, replacing all (6-700) solder balls with new ones and then re-attaching it under heat/pressure.
This is the place that you need:
http://www.theboardroom.info/index.html
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

HT4623 Have just updated to the latest version of ios6 on my iPhone 4S and now I can't see the apps that need updating. Is showing 8 but just left with blank screen.

Have just updated to the latest version of ios6 on my iPhone 4Sand now I can't see the apps that need updating. Is showing 8 but just left with blank screen- how do I fix this?

Look for the little Flag button in the lower left corner.

Can not access app store on iphone 5, comes up with blank screen?

click on app store on iphone 5 and it comes up with blank screen , after awhile the section heading at the bottom of the screen such as top charts, updates, search , etc, but the main screen body is still blank. Seems to be trying to connect but can't. Any ideas? Much appreciate it.
Thanks!
CC

Do you have a case on the phone? If so, what case? If you do, then try removing the case and see if it works.
If not, then try a reset. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone should reboot. After that, try again.

Ibook g3 OSX 10.2.8 was upgraded to 10.4 but screen went black, sound fine. How do I revert to 10.2.8 with blank screen?

So here's what happened. The Apple Store Geniuses generously upgraded my ibook g3 with OSX 10.2.8 to OSX 10.4 via USB port since my CD drive no longer works. But the screen suddenly went black, sound was fine. Genius was stumped, but when I restarted later I very briefly got an initial screen plus the music that accompanies an initial OS installation before screen went black again. I really think that OSX 10.4 was more than my ibook g3 could handle. I don't recall the specifications anymore and can't check them with a black screen, but capacity was fairly limited. I went back to Apple a few weeks ago to ask them to downgrade my poor ibook g3 to OSX 10.3 which seems more likely to work with my computer's specifications, but was informed that OSX 10.3 is no longer available for them to load via USB. Today it occured to me that OSX 10.2.8 is still somewhere on my ibook, and if there's some shortcut I can use to restart under 10.2 instead of 10.4, some switch of OS I can make while blind (since the screen is currently dark), I could at least still use the ibook using the old 10.2 OS. Is there a way to do this switch in OSX while essentially blind? If not, my ibook is basically a doorstop I originally spent over $600 on 10 years ago. I really can't afford to just run out an buy new computers as I am disabled and dying a slow painful death from Lyme disease, but can't afford medication to treat my own illness, let alone buy another computer every 5 years. Please help!

Hello,
Ok let's see what we can do here.
First thing to try is resetting the PMU. Http://support.apple.com/kb/HT1431 it may make no difference but its good practice to do so.
So times it can resolve faults. You say they installed Mac OS X 10.4. Did they setup a user a count and did you see the desktop? Did they simply hand it back to you when the installed failed with a blank screen?
The truth is, in order for you to restore your iBook your going to need the system restore disk. With a broken CD drive this has limitations as you have no real means to install.
The only option would be to use target disk mode on an external drive, but being an early G3 iBook I'm not sure if target disk mode will work. I am going to assume the shop used this method to install via USB.
What would be a good solution is to fit a replacement CD drive. They are often cheap enough to buy and relatively easy to fit on a white duel USB model. Replacement CD drives can be brought from eBay at very little money.
An online guide can help you fit one with the right screwdrivers.
With a replacement drive, you will be open to better options for installing or even using an apple hardware test disk to diagnose any faults with the screen.
Suprised you was left in such a situation by the shop.

TS1538 iPod Touch with blank screen that doesn't shut off and not recognized by iTunes?

I opened the app "MyTown 2", and it stayed on the opening screen for about 5 minutes - WAYYY too long! So I tried to close the app. A slight grayscale sort of film "slid" down over the opening screen, and then it went to this light gray, completely blank screen. It's been that way for over an hour - no matter what I do, can't do a hard shut down, and the device is not recognized by iTunes at all. It's completely DEAD!!!! Is there any hope? Anyone have a clue?

Following the instructions in this procedure to the letter. Here they are, with emphasis on some easily overlooked requirements:
Disconnect the USB cable from the iPod Touch, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector) release the Home button.
If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected a phone in recovery mode").
Use iTunes to restore the device.
If you do not see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Select the device in iTunes and choose "restore from backup".
If you still can't get it to work, you have done all you can and only Apple will be able to help.

ITunes preferences opens with blank screen, HELP!

Alright so I was getting bored of the Windows Media Player interface, so I decided to go back to iTunes.
The installation went fine, but when I wanted to change my options/Preferences, it comes up with this weird blank screen.
http://img40.imageshack.us/img40/3057/waaw.jpg
I've searched on google and only found 1 thread about this with no answers. So I decided to come and ask here.
So I would REALLY appreciate some help because I've always liked iTunes better than WMP.

What version of iTunes do you have installed? Do you have any iTunes plugins?
Troubleshooting issues with 3rd-party iTunes add-ons
If you create a new Windows Vista user, and log in to that user, do you still have the same problem?

X200 fails to boot up with blank screen

Hi guys, i came to the problem this morning. when i was trying to start up the computer, it failed to boot up. the machine was normally shut down last time. with no beep, the screen remains blank and black, without any change. after 2 seconds of pressing the powerkey, it is shut down with a short beep. here are what i tried:
1, use an external drive and a windows 7 disk. no reaction.
2,Remove AC and System battery. Press and hold the power button several times (3-5 time) for a count of 5 secondsReconnect AC and press the power button - if system starts normally, shut down and insert the battery. does not work.
by the way, the mahine was bought in Hongkong and still is in warranty. however, i am currently in Germany, and will stay for another 3 months.
anyone with any suggestions? thanks.
Solved!
Go to Solution.

got it fixed by clearing CMOS, wow
according to: http://forum.lenovo.com/t5/X-Series-ThinkPad-Laptops/Blank-screen-after-Bios-Upgrade-on-X200/ta-p/29...

Qosmio G30-126 - start up problem with blank screen

My laptop was running perfectly untill i suddenly found it booting with the start up sound enable but without any picture appearing on the display untill i got the windows login page at which the picture appeared with its normal perfect resolution.
The operating system is Windows 7 which was working smoothly, with all toshiba drivers installed from more than 3 monthes and the device was normally shut down the time before the problem appeared.
I tried using the recovery disc but the problem is that i cant see any thing! the computer is working but the display is black as if the laptop is completly turned off.
I tried to connect another external LG LCD but it didnt give any results but only a blank screen.
I really need help in this issue as this laptop contains all my work and i depend on it alot.

Hi Jeka-??
First, thanks for the reply. Second i think i can fully access the BIOS using F1 but the problem that the screen is totally black. You will ask how do you know that you entered BIOS? the answer is that it do the restart when i press the right combination of keys to save and exit i.e. After pressing F1, i press the end key which supposed to give me a message of save and exit and i press Y so the laptop restarts.
Third, are you sure that this is a defected GPU card? as if there are any possibilities to try before sending the computer to Toshiba service center, i'll be glad to them on my own.
By the way the graphic card works perfectly when the computer log on the windows even with games i.e. the monitor starts to display picture starting from the choosing profile page of windows. The original recovery disk is VISTA Ultimate and i'd like to restore it back instead of the installed windows 7 as a trial but unfortunately i cant see the process as i have to enter some data to continue installation and i cant remeber them to do it blind.
Do you know a method to reinstall the bios update again? as when i try to install it through windows 7 it keeps saying " [Error] BIOS Update is not supported OS. Unsupported OS or service pack is installed "

Hoe can I securely recycle iMac with blank screen - should I remove the hard drive, and anything else?

My iMac died after 8 years - blank screen, loud fan noise, no way to erase personal info. To recycle should I remove hard drive, and anything else?

Removing the hard drive should suffice. Use Google to find takeapart instruction, using you iMac's processor description in the search.
At eight years old, it is probably a G4 (the "desk lamp" style with an articulated display arm and white hemispherical base). So the search string would be "iMac G4 takeapart." If it turns out to be some other processor, simply substitute that processor (G3 or G5) for "G4."
The HD may not be bad, so you could keep it and connect to a newer Mac to retrieve files using this handy and inexpensive gadget:
Newer Technology Universal Drive Adapter - connects ATA/IDE/SATA to USB2 - 2.5", 3.5", 5.25" Drives

IMac starts with blank screen

Hello,
My iMac has been acting a little weird lately, until last night, when it got much worse. It's a 2009 iMac running Mavericks.
Every so often when I would turn it on, it would give the Apple chime and the screen would never come on, it would remain blank. I would try restarting a couple of times and it would typically fire right up, Apple chime and the screen would come to life. Last night, I was updating iTunes and a couple other things and my iMac restarted. Except that it did the blank screen thing on restart. Now, I can try restarting it for ten minutes before the screen actually comes to life, but when it does, it goes right back to trying to install updates. After the updates are done installing, the computer restarts itself... And the cycle continues.
It's pretty much stuck in a loop of start-update-restart-blank screen. It won't boot up correctly two consecutive times, no matter how many times I try.
Any advice?

Check System Preferences - Startup Disk and see if your internal HD is highlighted. If it is not please click it and then select restart.

Adobe form is opening with blank screen?

Hi,
When i am trying to open adobe form in my portal application, it contains only the blank screen. Could you please let me know, what is the reason for this and how to solve this problem.
I am using adobe livecycle desi
Thanks,
Sathishkumar GS

Hi Tulasi,
Thank you for your reply. I am using adobe livecycle designer 7.1 and reader 8.0
And activex controls are already activated. Even i am gettign the same result.
Thanks,
Sathishkumar GS

Satellite Pro 4030 boots with blank screen - works OK on an external monitor

My sat pro 4030, funning W98SE, boots to a blank, white screen. When I press the lid closer or use Fn/F5 it goes black. It works OK on an external monitor.

Hi Robert,
If your display appears correctly on an external monitor then it indicates that your graohics chip is still working correctly, so you problem must lie with the LCD panel itself, the FL Inverter, or the connection cable to the main board. I would recommend that you contact an Authorised Service Partner who can carry out further tests to diagnose the fault.
regards,

MSS : iview with blank screen

Similar Messages

Maybe you are looking for