MSS LAunchpad customization

Hi gurus,
I do not see any facility to customize Launchpad in MSS through SPRO. Can any one tell me what needs to be done.
I went to SPRO --> integration with my other mysap.com components --> Business packages / Fucntional PAckages --> Manager self-service (Mysap ERP) .
I see a node called reporting but it does not haev any customization entries for Launch pad.
Can some one let me know if there is supposed to be some customization possible for launch pad and if yes how do we enable them to be accessed through SPRO.
Apreciate any gidance on the same,
regadrs
Sam
regards
Sam

Thanks PK,
I have already gone through this doc and am using it for my reference. Here the doc says
The administrator makes the settings for the launchpad in the
Implementation Guide (IMG) of the relevant business package.
I did not find Launchpad settings under Manager self service in SPRO. So i asked where to exactly search for this node in SPRO as this document does not talk abou this.
I guess i can use transaction 'FPB_LP_MSS_REP_CUST' to do this, but i am curios to know the SPRO path (lest i may not miss any surrounding/related nodes for launchpad customization) which for some reason has not been mentioned in the documentation.
Any suggestions??
regards
Sam
regards
Sam

Similar Messages

  • Problem with MSS Launchpad

    Hello folks,
                    We are facing some problem with MSS Launchpad after the service pack, we have checked sicf, lpd_cust and done most of the troubleshooting steps,reached to point where we found table  T77MWBFCD and changed the URL value here, launchpad worked but the URL which we want to work and which was working fine in the past has stopped working.
    Any help will be appreciated.

    Hi everybody,
    finally we managed to fix this bug on our own.
    We set up the Managers Desktop (MDT) as suggested by SAP. But the MDT's reports could not be converted to the launchpad.
    Then we recognized via debugging that for any reason the following entries were missing in table FPB_LP6_SNI_REQ:
    - Role ROLE C 3 MSS
    - Instance INSTANCE C 3 REP
    Adding these entries manually fixed the problem.
    Regards,
    Dennis Bohlmann

  • MSS Homepage Customization

    Hi All,
    We have a requirement where in MSS Homepage customization is required.Portal version in use is EP5.0 and we have SAP 4.6C as R/3.
    Customization through Homepage Framework concept is not there in SAP 4.6 C it seems.And help is this regard with be highly appreciated.
    Regards,
    Richa Sinha

    It sounds like your "Home Page" is actually a Workset Map iView, as there is no Homepage configuration in 4.6C.
    You should just be able to create a new iView/Page and link it to the Workset at the same level as the other pages that appear in the menu.  The Workset Map iView should then pick up the new page and display it.
    You can enter descriptive text and specify a pictogram (graphic) in the properties of the new page.
    Regards,
    John
    PS - if you upgrade your portal to EP7, the pictures become "clickable".

  • MSS/ESS customizations

    Hi all,
         I'm a bit new regarding MSS/ESS customizations and I would like to know where can I find the right customization path in SIMG_SPORT / SPRO or t-code for this error message on portal page :
         "The properties for destination FP_ICF_DATA of type HTTP could not be located".
    Thanks in advance,
    André

    Hi Andre
    This is part of the J2EE setup, you need to create an HTTP setup using Visual Administrator as described in the following link
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/43/27098edb036025e10000000a422035/frameset.htm
    Thanks
    Michael

  • Problems with reports run from the MSS Launchpad

    Hi,
    The problem I am facing is with the reports being run from the MSS Launchpad. When i click on it, I can see that certain buttons like "Selection Fields", "org Assignment" are disabled. But there in one more button "More" which is enabled and clicking on it gives all the disabled options as enabled. However when the report window is maximized, the button "More " vanishes and all the buttons become disabled.
    I need to enable all the buttons now showing as disabled. Eagerly awaiting your reply.
    regards,
    Pinki

    Hi,
    Thanks for the reply. But can you please let me know how?
    regards,
    pinki

  • MSS iview Customization in SAP R/3 4.7

    Hi
    we are running on SAP R/3 4.7 version.  and we had deployed the MSS Business package into our SAP Netweaver portal 7.0.
    Now our requirement was to customize one field in the General Data iview.  corresponding par file name is com.sap.pct.hcm.eeprofilegeneraldata.par
    Is there any way (sequence of steps ) how can we customize the above iview.
    Thanks
    Prasad

    Hi Joseph,
    we have downloaded the par file into our local nwds, and we are not getting java files under src.api, src.core files. 
    Actually,a new function module was created, in which we have created new method. and we need to establish connection to
    this function module through SAP Enterprise connector.
    do you have any example or approach on this customizations
    Thanks
    Prasad

  • Best Practice for ESS/ MSS role customization

    Hi ,
    I would want to know the best practice for role customization for ESS / MSS business package . For eg if my company does not want to use someof the workset like working time , travel etc , what is the best practice for this scenario .
    anEEZ

    Hi Aneez,
    This is the link for complete best practices on NetWeaver
    http://help.sap.com/bp_epv260/EP_EN/index.htm
    Browse the Busines scenarios, you will find what you are looking for.
    Now, these ones is specific for ESS and MSS
    http://help.sap.com/bp_epv260/EP_EN/html/EP/N26_ESS.htm
    http://help.sap.com/bp_epv260/EP_EN/html/EP/N27_MSS.htm
    Hope this helps,
    Kumar
    P.S Reward Points for useful answers.

  • Standard ESS-MSS Package Customization

    HI,
    I have to customize existing standard ESS-MSS packages.
    I down load the packages to my NWDS from NWDI.But after down load,I am getting this error."The type AbstractStringBuilder is not visible".
    Please suggest me how to resolve this error.
    Regards
    -Sandip

    Hi,
    Try Repair project structure and classpath.
    Hope you have done the Organize imports....
    Regards
    Ayyapparaj

  • ESS/MSS webdynpro customization...........

    Hi ,
             I want to customize MSS WebDynpro iview in NW Developer Studio can anybody guide me for this ? How to perform this task ? If any Doc Available ?
    Can i use Visual Composer also?
    Thanks,
    Smita

    hi,
    yes, FPM is the framework which all self service applications follow. Hence all the self service applications have same patterns. The thread I referred you in first reply, contains a gudd xplanation of FPM. Plus you can find the <a href="http://help.sap.com/saphelp_erp2005/helpdata/en/b4/139525380149a49c8402e22700e4ba/frameset.htm">documentation</a> of FPM helpful.
    Its a framework which self service applications follow. hence no need to separately implement it.
    Is ESS/MSS deployed and running in your portal?
    But still you need to setup JDI for making any code changes to ESS/MSS applications.
    ~cheers
    avadh

  • MSS Launchpad

    Hello everybody,
    Please can someone assist with a problem we are experiencing?
    We have installed EP 7, SP6 with MSS (mySAP ERP)1.0
    One of the iViews we require is not in the business package. This is the Launch Pad iView.
    I have searched through the entire list and within each folder that makes up the business package. There were no error messages during the installation of the business package.
    Please can someone help with this problem as it is a vital component of the portal?
    Many thanks in advance
    Jo-lize

    Please find the MSS iview Launchpad in the common parts-directory in the PCD.
    (content for end users, common parts etc. etc.)
    regards,
    Pascal Rijnart

  • MSS UWL customization : Which .XML to modify and How?

    Hello,
    We have EP7 with MSS/ESS ERP 6.0 EHP4 and already configured the UWL system object with alias 'SAP_ECC_HumanResources'.
    I am using the UWL iview from the MSS business package on portal.
    I have a requirement to modify the task tab table removing few columns like 'Priority' and 'Status' etc.
    Tried the option in UWL Admin as  'Click to Configure Item Types and Customize Views Using a Wizard' but that does not give me any dropdown option to modify any view.
    I am going for the option to modify the xml file to implement the above change.
    There are multiple .XML file's as below and I am not sure which one I should modify to change my view.
    1. com.sap.pct.erp.mss.001 [Med]
    2. com.sap.pct.erp.mss.tra  [Med]
    3. uwl.webflow.SAP_ECC_HumanResources [Low]
    The UWL iview from business package has following properties as,
    sap_uwl_viewname = com.sap.pct.erp.mss.AlertView
    useNavigationId = com.sap.pct.erp.mss.Main
    Can someone please advise which .XML file I need to modify and how?
    After customizing the .XML fime do I need to make any change in the iview property as well?
    Awaiting reply!
    Thanks,
    Smita Thorat

    It would be nice if you can get some basics by reading the online help.
    View - http://help.sap.com/saphelp_nw70/helpdata/en/a2/42e9ba01a5463ba10c797fb8e106d3/frameset.htm
    Navigation Node - http://help.sap.com/saphelp_nw70/helpdata/en/e8/5a43bf9b8f406ea0776a3b428688a4/frameset.htm
    Now, let me try to answer your questions:
    Can you please help me understand why the system ID is 'ADHocSystem' and not my new system 'SAP_ECC_HumanResource' with connector 'WebFlowConnector which i have already registered ?
    Is something missing in config?
    The section "Current Item Information" provides information specific to the UWL item that is currently selected.
    I am not sure which item you have selected in your UWL inbox but it appears to be using an XML configuration file that is related to Collaboration. That is the reason you are seeing the AdHocSystem in the properties.
    What is the worflow task associated with this item ?
    Make sure that your task is mentioned in your XML configuration files and also your XML configuration files have a higher priority.
    I can see its pointing to the com.sap.pct.erp.mss.001 configuration.
    Yes - the section "Current Navigation Information" is pointing to the com.sap.pct.erp.mss.001 configuration.
    So as I understand from your response, I need to change the com.sap.pct.erp.mss.001 .XML file and rename it and then upload it to the configurations. and change the iview property UINavigation ID to <'>.
    Is it correct, please advise?
    This is not as simple as that.
    Based on the changes you are trying to make, you will need to make XML changes and upload (with High priority) for various tasks, views, etc.
    Please do some reading and get started with this and you can achieve this in a few steps. 
    - Shanti

  • MSS attendance & customization

    Hi Gurus,
    Am very new to Portal& ABAP also.I have installed the MSS pacakage in my portal. When I assigned to user my staff and my budget role is coming. In my staff ,attendance overview is displaying in graphics by default. I want to change that it by table format.how to do it. ?Shall we have to change in SPRO?As well as I have to customize the teamviewer also..How to customize it..? Guige me pls..
    Regards,
    Kiruba.R

    Kiruba,
    you need to change webdynpro for java and for that you need NWDI
    check this forum for more details
    SAP NetWeaver Development Infrastructure (NWDI)
    Thanks
    Bala Duvvuri

  • Adding reports to MSS launchpad

    Hi,
    I want to add some standard R/3 Reports (some Time Mgt reports like PT64, PT90, PT90_ATT, PT65 and Travel Mgt reports like S_AHR_61016405, S_AHR_61018613.) into Report launchpad.
    Could anybody please let me know if it is possible and if yes, how to do it.
    Thanks!

    Hi Swetha,
    Refer this link [Report Configuration for MSS|http://help.sap.com/bp_hcmv1600/BBLibrary/Documentation/N06_BB_ConfigGuide_EN_US.doc] Under that 3.1.2.1 Set Up Report Launchpad in HCM system
    With Regards,
    Laksh.

  • Hiding the launchpad customization options.

    Hi,
    With Launchpad, users are able to customize their page, But some customer's don't like to give this feature to the end user.(Because end-users might get confused). How we can restrict it. Mainly i am interested to restrict these using PFCG authorizations. is it possible, OR we need to enhace launcpad ?.
    Thanks
    Best Regards,
    Selva

    You can refer to this blog, for more information on the steps,
    FIORI - How to hide Catalog button on FIORI launchpad/hide what ever you don't want to see
    Best Regards
    Babu
    Customer Experience Group,
    SAP Labs India Pvt Ltd,
    Bangalore

  • Error when executing function in MSS launchpad report ???

    In MSS lanchpad report, we have the following problem:
    Error in Manager Sef-Service
    When calling the report, the following error occurred:
    System: HRP
    Error when executing function
    Basically in MSS report, I select employees in the first iView which calls another ABAP query in back-end to display back-end t-code inside iView of portal through ITS service. What could be the reason for it? please advice.
    Thanks,
    Anthony

    Please try converting the standadrd-delivered scenario RPT0, then check
    out the things.
    Also problem may be that your function code names contain
    the character '&'. This causes a problem when the selected function
    code is passed to the ITS-WebGUI as a URL parameter. Please use only
    standard characters (A..Z and _) when you define a function code.
    Then it should work.
    Please go through the following link also
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/3a/
    3198408d953154e10000000a1550b0/frameset.htm
    Please test in backend using Se38 > PWPC_RPT_START_REPORT_TEST
    The Reporting Iview in the portal has the Report category type, by
    the report category type is set to "RPT0". Therefore, when the
    application is launched, the reporting category type is also sent as URL
    parameter to the backend system. As of ECC 6.0 only the reporting
    category type "RPT0" is supported. ensure this is set for your custom reports if you are using own scenarion
    then set in the Iview property of reports as well
    ie example
    1)Change the Iview property "Scenario" of the Reporting iview from
    "RPT0" to your own "ZRPT", than this set of reports will work. however,
    the standard reports will not work.
    pwpc_convert_mdt_to_lpa >>
    The following list of reports have been converted.

Maybe you are looking for

  • I cant open itunes on computer

    I cant open itunes on computer

  • Generating DME format by executing F110

    Hi As per the bank requested, we have an developed and Data Medium Engine format using DMEE. After executing the payment run, I had downloaded the output of the file using Environment --> Payment Medium  --> DME Administration When i go into Environm

  • Safari opens up all my saved pages...

    When I start safari on my macbook air, safari opens up all of my pages that I have saved on top. Why does this keep happening? Anyone else who has the same problem as I do? This problem is not something that all the suddenly popped up after updating

  • Applicability of JMS

    Hi, I am new to JMS, I have gone through difference online resources on JMS, but i'm still not clear when to use jms, I am not able to map JMS with any real life application example. Can anybody explain me with a small set of example. I understand th

  • Anyone know why itunes BBC radio is not working?

    For the last 24 hours none of the BBC radio stations seem to be working through itunes. They are still working on WMP, anyone have any ideas or experiencing the same thing?