MSS Manager's Desktop Reports

I have created a new Function code and assigned to a category under MDT. The report shows up fine under MSS>Reports however, I get this selection screen (LPA Reporting) forcing me to select employees before getting to Reports Result. Is there a way to skip this step so that the actual report is launched directly?

in the customisation you can have a variant saved which runs for all the org unit
usually it is tough to skip
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=199820849
please check the customisation and report category
You can check the code of HRWPC_RPT_FCODE_EXEC
V_TWPC_V you can check how the evaluation path are selected
2. Execute SPRO, then SAP Reference IMG
3. Choose Personnel Management >> Manager's Desktop >> Enhancement of Function Codes >> Define Function Codes >> Define Function Codes for Manager's Desktop
you can defne a variant here
Edited by: Siddharth Rajora on Mar 15, 2011 8:20 PM

Similar Messages

  • MSS Reporting - Cannot choose Manager's Desktop Application Category

    Dear experts,
    I need to add reports to Reporting in mss. I am trying to custom Reports in launchpad (fpb_launchpad_cust). I can see the reports in folder. However, I can't  add new application under Manager's Desktop Application Category.
    Is there any other configuration i need to do?
    We are using SAP Netweaver Portal 7.0 and ecc6.
    Thanks for any assistance,
    Nanie Arianie

    Solution:
    1. In the SAP HCM System choose:
    SAP Easy Access Menu
    Transaction SE38
    2. In the ABAP Editor: Initial Screen enter the Program FPB_LP_WRITE_ENTRIES and choose Execute.
    3. In the Report FPB_LP_WRITE_ENTRIES screen select the MSS Reporting and MSS with Folders options and deselect the checkbox Test Run.
    4. Choose Execute. The sample entries are entered in the Report Launchpad in the portal.
    5. Log on to the portal with User manager1 and check if the sample entries are displayed.
    6. In the ECC system leave the transaction and go back to the SAP Easy Access Menu.
    7. Enter transaction PWPC_CONV_MDT_TO_LPA in the Command field.
    8. In the Report to convert MDT table entries to LPA table entries screen, enter the MDT Scenario RPT0 and deselect the Test run checkbox.
    9. Choose Execute. The list in the next screen shows the reports which have been added to the Report Launchpad.

  • How do I add a new report to Manager's desktop

    Dear SDN Community,
      I am using 2004s SP12 ESS/MSS portal with ECC 6.0. Can you please tell me how do I create a new report in MDT(Manager's DeskTop, Tcode : ppmdt) and publish that report into reporting iView.
    Thanks
    Vivek.

    I didnt get a right answer for this in SDN and i have created a transaction iview and called the report in a SAP transaction and resolved this issue.

  • How to change a report in Manager's Desktop?

    Hi all,
    i want to change a report in the Manager's Desktop Compensation Management.
    Report name: Cost Center
    You can see it under this link: [www.starbulls-fotos.de/1.jpg]
    When i now run the report i can see the report, but with no selection screen. I only get a finished report with fixed selection parameters
    You can see it under this link: [www.starbulls-fotos.de/2.jpg]
    How can i change this selection parameters?
    In this example i want to change the "Cost Element Group" to an other value.
    When i run this report outside of the Manager's Desktop with the transaction code "S_ALR_87013611" i get the selection screen needed and can change the parameters.
    It would be great if anyone could help me!
    TIA!
    strobbel

    Hi Strobbel,
    Execute your report via the transaction.  Check the selection variants on that first selection screen.  You will see the default one that came up for you and others that may have been created to default for Managers' Desktop.  You can select the one that is appearing with the incorrect cost element group and change it to the correct one. Save the changed selection screen.  We also have a transaction ZZBCVARIANT that can be used to change the selection screen variants. 
    Also, remember, the manager in Managers' Desktop may be limited due to authorizations to see data from only certain cost centers (his own). 
    Paul

  • BW Reporting from Portal on utilizing Manager's Desktop

    Hi BW People,
    I needs an help from you.
    I posted this thread on Forum Portal side
    /thread/540267 [original link is broken]
    The question is,
    on customizing Manager's Destop
    in table <b>T77MWBBWS</b>, in the field BW Rep.Templ.ID
    is not possible utilize standard template QGL_STANDARD_TEMPLATE but it needs custom Templete.
    I'm now able to start BW report from portal but
    1) In custom Templete i insert a Query, is not possible to transport this. I have to create this custom templete directly in Production system?
    2) Before to start BW report, as standard in Manager's Desktop is, i have to select on Employee number, manager's subordinate, but on calling BW report I have one selections screen and not in the field Employee of the report the number selected.
    I have this possibility, I have at least the possibility to Skip the screen regarding Employee number selection?
    Thanks in advance for answer
    Dom

    Hi guys,
    just for your information
    Problemems are solved both:
    the first one by SAP through a customer message and
    the second one by a standard webdynpro modification.
    Kind Regards
    Dom

  • MSS Manager Report

    Hi
    In MSS Manager Report, there is report a called Absence Quota Information. Now, the report add all vacation quota type into the report but actually, we want to have one vacation quota type to be used as deductive quota, therefore, this quota type need be deducted from total quota amount. Is there way to configure this ? Thanks for the help.
    Regards,
    Jim

    Resolved...

  • Manager's Desktop Enhancement

    Hi ...
    I got a requirement to enhance Manger's Desktop i.e. PPMDT Transaction.I need to add Contract text column from Infotype PA0016 in Perosonal Data of Manager's Desktop.Please help me to resolve this issue.Thanks in advance.

    Hi Anil,
    Yes..it's true. The employee is reporting to two reporting managers. Thanks for the guide.
    I have run the T-Code fpb_launchpad_cust in the QAS server. The launchpad only show the Manager  Self Service reporting. It doesn't display the Time Management, Employee Data, Accounting Reports, and Travel Management like it shows in DEV server. 
    FYI, i have
    1) run the FPB_LP_WRITE_ENTRIES in SE38 (Tick MSS reporting and MSS with folders, unchecked test run)
    2) run T-Code PWPC_CONV_MDT_TO_LPA (unchecked test run. The list is empty)
    3) T-Code fpb_launchpad_cust ( Just show the Manager Self Service Reporting)
    I still found the error 'no object found' in Portal QAS for all reports. Please guide me..
    Thanks,
    Rgds,
    Nanie Arianie

  • SAP note for Manager's Desktop ECC 6.0

    Hi,
    Are there any changes in Manager's Desktop in ECC 6.0 ?
    If no, is there any SAP note or any SAP document stating that there are no changes in Manager's Desktop for ECC 6.0 ?
    If yes, can someone pls share the changes.
    Thanks much....

    This is what is mention in documentation:
    22.9 PA-MA HR Manager's Desktop
    22.9.1 Conversion Program for Reporting in Manager Self-Service (MSS)
    Use
    As of SAP ECC 6.0, SAP_HR 600, the Implementation Guide for Manager's Desktop has been enhancedas follows:Under the menu path Personnel Management -> Manager's Desktop -> Customer Adjustment ->
    Convert MDT Data to MSS Reporting Launch Pad, you can now run a program that converts existing table entries from the old Manager's Desk Top (MDT) to be used on the new Reporting Launchpad.
    Effects on Data Transfer
    You must have existing entries in the following tables:
    - T77MWBS
    - T77MWBSC

  • Manager's Desktop

    Hi,
    To get a custom abap report in the manager's desktop, i have done the following in IMG:
    1. Define Function Code
    2. Define Structure of Function Code : Scenario MWB1, Higher level function code HIS
    How can i ensure that the report only outputs the data for the user's (manager's) organizational unit. I can enter a variant with the right org unit selected in Define Function Code but it works for some reports and dosen't work for others. Plus, obviously the variant with org unit should not be entered in configuration.
    Can anyone point me to the right direction please? Any document would be helpful.
    Thanks
    Zubair
    [email protected]

    Zubair,
    Without knowing the details of your reports here are a couple of things to check:
    1.  When you define your function code, if you are entering the report name, I think that the report needs to be based on the PNP logical database.  If it is not, then there might be an issue passing the appropriate information into the report.
    2.  There is another configuration step that you might try.  It is called "Define Object Type-Specific Function codes".  Here you link your custom defined functions with which object they can be run with.  For instance if you want to drag and drop a position from MDT to the report.
    3.  The other option would be to call your report from a function module.  This is setup when you define the function code.  In this case you could copy one of the standard function module to ensure you have to correct importing/exporting parameters and insert your own code.  Here is a code example from the function module.  This is how we handle non-PNP reports:
    FUNCTION z_h84_xss_custom_reports.
    *"*"Local Interface:
    *"  IMPORTING
    *"     VALUE(ACT_FCODE) TYPE  MWB_FCODE
    *"     VALUE(ACT_PLVAR) TYPE  PLVAR
    *"     VALUE(ACT_OTYPE) TYPE  OTYPE
    *"     VALUE(ACT_OBJID) TYPE  REALO
    *"     VALUE(ACT_BEGDA) TYPE  BEGDATUM DEFAULT SY-DATUM
    *"     VALUE(ACT_ENDDA) TYPE  ENDDATUM DEFAULT '99991231'
    *"  EXPORTING
    *"     VALUE(ACT_PROGNAME) LIKE  SY-REPID
    *"     VALUE(ACT_SCREEN_NO) LIKE  SY-DYNNR
    *"  TABLES
    *"      ACT_OBJECTS STRUCTURE  HRSOBID
    *"  EXCEPTIONS
    *"      FCODE_NOT_VALID
    * Range for personnel Numbers
      RANGES: r_pernr FOR pernr-pernr.
    * build a range of perner numbers
      LOOP AT act_objects WHERE otype = 'P'.
        MOVE: act_objects-sobid TO r_pernr-low,
              'I' TO r_pernr-sign,
              'EQ' TO r_pernr-option.
        APPEND r_pernr.
        CLEAR r_pernr.
      ENDLOOP.
    * Now Check Which Report is being launched
      CASE act_fcode.
    * Wage Type overview
        WHEN 'ZUS1_01'.
          SUBMIT zh84py_us_zl_overview_ess VIA SELECTION-SCREEN
    *                                 WITH p_begda = act_begda
    *                                 WITH p_endda = act_endda
                                     WITH s_pernr IN r_pernr
                                     AND RETURN.
    Hope this helps.
    Chris H.

  • Manager's Desktop Authorizations

    Hello,
    We have several custom reports configured for Manager's Desktop and the authorization object P_ORGIN is configured to allow access to the necessary HR info types.  In Manager's Desktop, manager's can only see info for their own employees.  The problem is if they have access to SE38 and run the reports directly, they can see anyone's info.
    Is there an alternative to P_ORGIN that only allows access based upon the org structure?
    Thanks,
    Dale

    Hi,
    You can go for structural authorizations for managers.
    There are lots of threads regarding structural authorizations.Have a look it it.
    Note:
    Create Tcode for reports and give authorizations for it.Dont give authorizations of SE38.
    Cheers,
    Manoj.

  • Manager's desktop configuration -- Functions

    Hi
    User log on Manager’s Desktop via PPMDT,  there is a tab under Manager Desk Top called “Employees”, when clicking that tab,  user can see a whole hierarchy function list, like reports. How do I customize that hierarchy function list ? User  wants to show only part of functions (reports). I’m very new on Manager Desktop configuration, please help. Thanks
    Jim.

    Hi,
    Take a look to this link, it will tell you everything for Manager's Desktop.
    <a href="http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAMA/PAMA.pdf">Manager's Desktop</a>
    Regards,
    Amit
    Reward all helpful replies.

  • HR-ABAP issue how to find manager in PA reporting

    hi all,
    my requirement is find the manager in PA reporting.
    Retrieve the Manager Personnel number from the HRP1001 table.Use this personnel number and retrieve Name (ENAME) from IT0001 and Email ID (USRID) from IT0105 SUBTYPE as u20180010u2019
    how to find the manager position and his relation ship.

    Hi,
    To get the position of the manager -
    Use the FM
    RH_READ_INFTY_1001
        CALL FUNCTION 'RH_READ_INFTY_1001'
         EXPORTING
      AUTHORITY              = 'DISP'
      WITH_STRU_AUTH         = 'X'
           plvar                  = '01'
           otype                  = 'P'
           objid                  = fs_pa0000-pernr (manager's id)
       subty                  = 'B008'
       begda                  = fs_pa0000-begda
       endda                  = fs_pa0000-endda
          TABLES
            i1001                  = t_i1001
      OBJECTS                =
         EXCEPTIONS
           nothing_found          = 1
           wrong_condition        = 2
           wrong_parameters       = 3
           OTHERS                 = 4
        IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
        APPEND LINES OF t_i1001 TO t_pos.
    this table t_pos holds the postion.
    Regards
    Lekha

  • Request not visible in the version management of a Report Program

    Hi,
    We Imported an external request into the SAP System.
    The request was imported successfully and a program already existing is updated with that request,
    The problem is that the request number is not visible in the Version Management of the Report Program, but the other Programs have the request number visible in the version management, we could not find the request number in that  particular program
    We tried reimporting the request but the request is not visible.
    Regards

    Check the transport logs and see if there are any erros/warnings.

  • Interesting SCOM Reports and "Microsoft System Center Virtual Machine Manager 2012 R2 Reports" MP Issue , Some reports appear others don't

    Our test environment is quite simple one Operations Server 2012 R2; with the database and SSRS instance on another server; Service Manager 2012 is on it’s own virtual machine; and the Service Manager Data Warehouse on it’s own. I’ve been trying to demo chargeback
    with scvmm and I’m having issues with the chargeback reporting.
    I’ve followed this process to install chargeback reports:http://technet.microsoft.com/en-us/library/jj614406.aspx which
    completed successfully. All of the cubes seem to process correctly in Service Manager and I can create a chargeback analysis excel sheet with no issues in service manager. I still do not get any chargeback reports in the Operations console though. I get some
    reports under the “Microsoft System Center Virtual Machine Manager 2012 R2 Reports” heading like Capacity, Host Group Forecasting, Host Utilization, etc but no chargeback report.
    I can see the chargeback report in the SSRS website but cannot get it to appear in the Operations console. If anyone has any tips or troubleshooting they can point me at I would appreciate it.

    Hi,
    Hope the below link could be helpful:
    Enabling Chargeback in a Service Provider Cloud by Kristian Nese
    http://blogs.technet.com/b/privatecloud/archive/2013/04/12/enabling-chargeback-in-a-service-provider-cloud-by-kristian-nese.aspx
    Regards,
    Yan Li
    Regards, Yan Li

  • Does Solution Manager support Service Report for non-abap?

    Does Solution Manager support Service Report for non-abap?
    We can schedule and view reports for ABAP but for all the non-ABAP such as J2EE stack (PORTAL) we can not pull out a report.
    If the answer is yes please let me know where I can get the documentation of how to setup SLA for PORTAL or non-ABAP.
    I found a document on EWA non-abap but non for SLA.

    Hi
    actually i am in task of setting up ewa for portal.
    i had already done with abap components (ewa and sla)
    i stronly believe one of the pre-requiste to get sla is EWA.
    so i think if u can setup ewa for portal then you can get sla too.
    Regards,
    Vijay.

Maybe you are looking for

  • Reports only showing up in local admin console?

    Ok, so I am stuck. I have installed SCCM 2012 without issue and installed the Reporting Services point using the same system as the SRS server. Everyhting at first appeared to be great. Using the local console on the server all the reports show up an

  • c:redirect VS RequestDispatcher -WHICH ONE IS BETTER TO USE?

    WHENVER WE WANT TO ACCESS FILES FROM OHTER APPLICATIONS,WHICH ONE IS BETTER TO USE,<c:redirect> OR RequestDispatcher

  • Install second optical drive mac pro

    Although there are several support documents available from Apple on how to replace the hard drive and replace the optical drive in a Mac Pro, I could not locate a pdf on how to install a second optical drive. In this case, I wanted to add a Blu-Ray

  • Adding more language menus to a curve 8520

    Hello community, i got a german curve 8520  with a "qwertz  Keyboard"  which offers me   to use either english or german as the language in which appear the menus of the curve 8520. I would like to spanish menus. How can i add spanish as a part of la

  • Download instrument driver problem & doubts

    Hey friend, i encounter sme problems in displaying my waveform in my labview exercise..currently i am a student n wrking on proj. My present/ongoing task is to try out n understand a prev ex done by a student frm the last batch. The ex is a AM modula